Synthesis and characterization of rutile titanium dioxide/polyacrylate nanocomposites for applications in ultraviolet light‐shielding materials

Rutile titanium dioxide (TiO₂)/poly(methyl methacrylate‐acrylic acid‐butyl acrylate) nanocomposites were synthesized via seeded emulsion polymerization and characterized by Fourier transmission infrared, dynamic light scattering, X‐ray diffraction, ultraviolet–visible (UV–vis) spectroscopy, scanning electron microscopy, transmission electron microscopy, and thermogravimetric analysis to study their UV‐shielding property. The effects of the nanoseed types, surfactant concentrations, and functional monomer amounts on the polymerization conversion, particle size, emulsion stability, and morphologies of the resulting nanocomposites were investigated. The dependence of UV‐shielding performance on the nanoparticle content and dispersion was also explored. The optimized results are obtained with 2 wt% of TiO₂ nanoparticles addition, and the effectiveness of UV shielding is significantly increased by using the synthesized rutile nano‐TiO₂/polyacrylates, for which the nanocomposite coating with a thickness of 200 μm could block up to 99.99% of UV light (≤350 nm) as confirmed by UV–vis spectrometry. POLYM. COMPOS., 36:8–16, 2015. © 2014 Society of Plastics Engineers     

Effect of POSS‐grafted titanium dioxide on the electrical and thermal properties of LDPE/TiO2 polymer nanocomposite

Two types of nanocomposites have been fabricated by a ball‐milling technique. The first type consists of untreated titanium dioxide (TiO₂) incorporated into low‐density polyethylene (LDPE). For the second one, TiO₂ filler chemically treated with trisilanol phenyl–polyhedral oligomeric silsesquioxane (TP–POSS) as compatibilizing agent was ball‐milled with LDPE. All specimens were tested by microstructure analysis and thermal, dielectric characterization techniques. Microstructure analysis by atomic force microscopy and scanning electron microscopy show clearly an increased dispersion in presence of POSS. Scanning electron microscopy even shows the formation of a particular structure due possibly to interactions between functionalization. It was observed that the modification of the surface of TiO₂ by the POSS decreased the dielectric loss. All nanocomposites containing treated TiO₂ revealed an improvement in thermal conductivity, with the most distinct value of 19% in case of LDPE containing 5 wt % treated TiO₂. The incorporation of TiO₂ fillers seems to reduce the dielectric breakdown strength of the nanocomposites. However, nanocomposites containing 3 and 5 wt % treated TiO₂ have exhibited a slightly enhancement in dielectric breakdown strength up to 5%. The improvement in surface resistance to partial discharge was found in all nanocomposites specimens, especially for both types of composite containing 7 wt % untreated and treated TiO₂. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46095.     

Preparation and properties of transparent zinc oxide/silicone nanocomposites for the packaging of high‐power light‐emitting diodes

New transparent zinc oxide (ZnO)/silicone nanocomposites with outstanding integrated properties, including a high UV‐shielding efficiency and transparency, bigger thermal conductivity, and lower dielectric constant, were successfully developed; they were prepared by the uniform dispersion of organic modified nano‐ZnO in a silicone matrix through in situ polymerization. The ZnO precursor was prepared by a direct precipitation method, which was then calcinated at different temperatures to produce nano‐ZnO with various morphologies and sizes. The effects of the size, surface nature, and content of nano‐ZnO on the key properties (e.g., optical and dielectric properties, thermal conductivities) of the composites were systematically investigated. The results show that the organic nano‐ZnO prepared by 3‐methacryloxypropyltrimethoxysilane can increase the dispersion of nano‐ZnO in silicone resin, and the interfacial adhesion between inorganic and organic phases, and consequently improve the integrated properties of nanocomposites. The increase of the particle content and size of ZnO in composites can lead to high thermal conductivity and UV‐shielding efficiency but lower visible‐light transparency, so there is an optimum content and size of ZnO in composites to obtain the best integrated properties of the composites. Specifically, the nanocomposite containing 0.03 wt % organic nano‐ZnO with an average size of 46 ± 0.4 nm not only had a high visible‐light transparency, UV‐shielding efficiency, and thermal conductivity but also possessed a low dielectric constant and loss and met the requirements of high‐performance electronic packaging for high‐power light‐emitting diodes. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Towards transparent PMMA/SiO2 nanocomposites with promising scratch‐resistance by manipulation of SiO2 aggregation followed by in situ polymerization

Poly(methyl methacrylate) grafted silica (SiO₂‐g‐PMMA) was synthesized via in situ suspension polymerization. To achieve better uniform dispersion, hexadecyltrimethylammonium bromide (CTAB) was introduced into xylene to manipulate SiO₂ aggregation. SiO₂‐g‐PMMA or SiO₂ was incorporated into PMMA matrix by in situ polymerization to prepare PMMA‐based nanocomposites. The effect of CTAB amount, in the range 0–35 wt %, on the modification was evaluated by DLS, TGA, and FTIR. Furthermore, morphology, optical, mechanical, and thermal properties of PMMA nanocomposites was characterized by SEM, UV–vis, DMA, and TGA. Owing to surface functionalization, SiO₂‐g‐PMMA exhibited far more excellent compatibility and dispersion in matrix compared with SiO₂. Surface hardness and thermal properties of nanocomposites were enhanced significantly under the premise in high transparency. It is expected that transparent nanocomposites with promising scratch‐resistance could have wide applications, such as airplane shielding window and daily furniture. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44612.     

Nano‐sio2‐reinforced ultraviolet‐curing materials for three‐dimensional printing

As an additive manufacturing technology, ultraviolet (UV)‐curing three‐dimensional printing, which requires the use of a photocurable resin, is increasingly being used to produce customized end‐user parts of many complex shapes. In this study, to improve the strength and ductility of printing materials, nano‐SiO₂‐reinforced photocurable resins were prepared by a planetary ball mill; then, the morphology, photochemistry, thermal property, and mechanical properties of the nanocomposites were investigated and characterized. Transmission electron microscopy analysis indicated that the modified nano‐SiO₂ was well dispersed in the photocurable resin. The glass‐transition temperature increased from 67.2°C for the unfilled resin to 71.7 and 80.1°C for nanocomposites with nano‐SiO₂ contents of 0.3 and 0.7 wt %, respectively. The tensile strength and impact strength were increased by 46.7 and 165.3% for nanocomposites with 0.3 wt % nano‐SiO₂. The flexural modulus of the nanocomposites increased from 1.7 to 8.0 GPa when 0.7 wt % nano‐SiO₂ was added to the photocurable resin; this appeared to originate from the relatively high level of dispersion and the intimate combination of the nano‐SiO₂ with the matrix. The investigation of the physical and chemical properties of such UV‐curing materials showed that the low filler concentration (<1 wt %) of nano‐SiO₂ did not affect the processability of the nanocomposites. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42307.     

Preparation and optical properties of transparent epoxy composites containing ZnO nanoparticles

Polymer nanocomposites are usually made by incorporating dried nanoparticles into polymer matrices. This way not only leads to easy aggregation of nanoparticles but also readily brings about opaqueness for nanocomposites based on functionally transparent polymers. In this letter, transparent ZnO/epoxy nanocomposites with high‐UV shielding efficiency were prepared via two simple steps: first, in situ preparation of zinc hydroxide (Zn(OH)₂)/epoxy from the reaction of aqueous zinc acetate (Zn(Ac)₂·2H₂O) and sodium hydroxide (NaOH) at 30°C in the presence of high‐viscosity epoxy resin; second, thermal treatment of the as‐prepared Zn(OH)₂/epoxy hybrid into ZnO/epoxy composites. Optical properties of the resultant ZnO/epoxy nanocomposites were studied using an ultraviolet–visible (UV–vis) spectrophotometer. The nanocomposites containing a very low content of ZnO nanoparticles (0.06 wt %) possessed the optimal optical properties, namely high‐visible light transparency and high‐UV light shielding efficiency. Consequently, the as‐prepared ZnO/epoxy nanocomposites are promising for use as novel packaging materials in lighting emitting diodes technology. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Poly(ethylene terephthalate)-based nanocomposite films as greenhouse covering material: Environmental sustainability,mechanical durability,and thermal stability

The environmental sustainability, mechanical durability, and thermal stability of the poly(ethylene terephthalate) (PET)-based nanocomposite films compared with pure PET were evaluated. The samples were obtained by incorporating 2 wt% of TiO₂, SiO₂, ZnO nanoparticles (NPs), and an equal mixture of NPs in polymer by melt-mixing in a twin-screw extruder. The mechanical properties and hardness of samples were determined by the tensile and the atomic force microscopy-based nanoindentation tests. The melting, crystallization, and glass transition temperatures of samples were studied by dynamic mechanical thermal analysis and differential scanning calorimetry. The effects of compatibility, dispersity, and hydrophobicity of NPs on the surface morphology, crystallinity, and thermomechanical properties of nanocomposites were studied. The interaction of SiO₂ NPs with PET chains had a promising effect on the surface morphology, high elastic modulus, dispersibility, crystallinity, and thermostability of the sample. The mixing of ZnO and TiO₂ NPs improved the UV-blocking effects, and photostability, while the SiO₂ and TiO₂ NPs maintained the thermal properties of the film against UV radiation. The resulting film could be a good candidate as a greenhouse covering material due to its suitable photosynthetically active radiation transmittance.     

Enhanced photoresponse and photocatalytic activities of graphene quantum dots sensitized Ag/TiO2 thin film

TiO₂ thin films were fabricated through hydrothermal method. Silver nanoparticles were loaded on TiO₂ thin films via photoreduction technique. Subsequently, the graphene quantum dots (GQDs) were spin‐coated on the Ag/TiO₂ nanocomposites thin films. The crystal structure, surface morphology and UV‐vis absorbance were tested by XRD, SEM and ultraviolet‐visible spectrophotometer. These results indicated that Ag nanoparticles and GQDs are anchored on the TiO₂ nanorods. Absorbance of Ag/TiO₂ and GQDs/Ag/TiO₂ nanocomposite thin films have been extended into the visible region. Visible‐light response of the samples were investigated by electrochemical workstation. The photoresponse of the sample can be enhanced by sensitization of the Ag nanoparticles and GQDs. The enhanced visible‐light response may be due to the surface plasmon resonance of silver nanoparticles and visible absorbance of GQDs. The highest photocatalytic activity has been observed in the 9‐GQDs/Ag/TiO₂ composite thin film. The efficient charge separation and transportation can be achieved by introducing the Ag nanoparticles and GQDs in the TiO₂ thin film.     

Fumed SiO2 nanoparticle reinforced biopolymer blend nanocomposites with high dielectric constant and low dielectric loss for flexible organic electronics

In the present study, fumed silica (SiO₂) nanoparticle reinforced poly(vinyl alcohol) (PVA) and poly(vinylpyrrolidone) (PVP) blend nanocomposite films were prepared via a simple solution‐blending technique. Fourier transform infrared spectroscopy (FTIR), ultraviolet–visible spectroscopy (UV–vis), X‐ray diffraction (XRD), and scanning electron microscopy (SEM) were employed to elucidate the successful incorporation of SiO₂ nanoparticles in the PVA/PVP blend matrix. A thermogravimetric analyzer was used to evaluate the thermal stability of the nanocomposites. The dielectric properties such as dielectric constant (?) and dielectric loss (tan δ) of the PVA/PVP/SiO₂ nanocomposite films were evaluated in the broadband frequency range of 10^?2 Hz to 20 MHz and for temperatures in the range 40–150 °C. The FTIR and UV–vis spectroscopy results implied the presence of hydrogen bonding interaction between SiO₂ and the PVA/PVP blend matrix. The XRD and SEM results revealed that SiO₂ nanoparticles were uniformly dispersed in the PVA/PVP blend matrix. The dielectric property analysis revealed that the dielectric constant values of the nanocomposites are higher than those of PVA/PVP blends. The maximum dielectric constant and the dielectric loss were 125 (10^?2 Hz, 150 °C) and 1.1 (10^?2 Hz, 70 °C), respectively, for PVA/PVP/SiO₂ nanocomposites with 25 wt % SiO₂ content. These results enable the preparation of dielectric nanocomposites using a facile solution‐casting method that exhibit the desirable dielectric performance for flexible organic electronics. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134 , 44427.     

Effect of titanium dioxide on the UV‐C ageing behavior of silicone rubber

The ultraviolet (UV)‐C ageing behavior of silicone rubber (SiR) incorporated with titanium dioxide nanoparticles (nano‐TiO₂) was studied under UV‐C radiation. The SiR incorporated with nano‐TiO₂ displayed excellent physical properties when exposed to UV‐C radiation. With the increase of the ageing time, the SiR with nano‐TiO₂ showed no significant change in crosslinking density and Shore A hardness. Moreover, compared with the SiR without nano‐TiO₂, the SiR incorporated with nano‐TiO₂ also exhibited high retention ratio in tensile properties, especially elongation at break. It was found that nano‐TiO₂ was a good ultraviolet light stabilizer during the UV ageing process of SiR and the optimum content of nano‐TiO₂ was 2 phr. The results of Fourier transform infrared spectroscopy and X‐ray photoelectron spectroscopy showed the appearance of O? H and C?O and the decrease of the intensity of SiC₂O₂ in SiR samples during the process of UV‐C ageing. Based on these results, a possible UV ageing mechanism of SiR could be proposed. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46099.     

Characterization and physical properties investigation of conducting polypyrrole/TiO2 nanocomposites prepared through a one‐step “in situ” polymerization method

Nowadays, nanocomposites are a special class of materials having unique physical properties and wide application potential in diverse areas. The present research work describes an efficient method for synthesis of a series of polypyrrole/titanium dioxide (PPy/TiO₂) nanocomposites with different TiO₂ ratios. These nanocomposites were prepared by one‐step in situ deposition oxidative polymerization of pyrrole hydrochloride using ferric chloride (FeCl₃) as an oxidant in the presence of ultra fine grade powder of anatase TiO₂ nanoparticles cooled in an ice bath. The obtained nanocomposites were characterized by Fourier‐transform infrared (FTIR), thermogravimetric analysis (TGA), X‐ray diffraction (XRD), and scanning electron microscope (SEM) techniques. The obtained results showed that TiO₂ nanoparticles have been encapsulated by PPy with a strong effect on the morphology of PPy/TiO₂ nanocomposites. Also, the synthesized PPy/TiO₂ nanocomposites had higher thermal stability than that of pure PPy. The investigation of electrical conductivity of nanocomposites by four‐point probe instrument showed that the conductivity of nanocomposite at low TiO₂ content is much higher than of neat PPy, while with the increasing contents of TiO₂, the conductivity decreases. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Photoactivity of Poly(lactic acid) nanocomposites modulated by TiO2 nanofillers

Photoactivity of poly(lactic acid) (PLA) nanocomposites is of great interest for rational design of products for either short‐term/single‐use or long‐term/durable applications. We prepared PLA/TiO₂ nanocomposite films through a solution mixing/film casting method. Results showed that photodegradability/photostability of PLA could be well modulated by selecting appropriate TiO₂ nanofillers. TiO₂ nanoparticles and nanowires were characterized using X‐ray diffraction, UV–Vis–NIR spectrophotometer, and scanning electron microscopy. Changes in color, weight, structure, thermal stability, and phase transitions of PLA and nanocomposite films before and after UV irradiation were evaluated to study photoactivity characteristics. Pure PLA exhibited moderate photodegradability, but the photodegradability and photostability of PLA nanocomposites (PNA) were significantly enhanced by NanoActive (NA) TiO₂ nanoparticles and A type TiO₂ nanowires, respectively. Pure PLA had a weight loss of 27% after 38 days of UV irradiation. The weight loss of photodegradable (PD) PNA (PNA = PLA with 1% NA TiO₂) reached 38%, whereas that of photostable (PS) nanocomposites (P3AW) (P3AW = PLA with 3% A type TiO₂ nanowire) was only 5%. PD PLA exhibited characteristic peaks of carboxylic acid OH stretching and C?C double bond after UV irradiation in Fourier‐transform infrared spectra, whereas spectra of PS PLA remained almost the same. Thermal decomposition temperatures, glass transition temperatures, and melting temperatures of PD PLAs decreased dramatically after UV irradiation, but no obvious changes were observed for those of PS PLAs. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40241.     

Nanocomposites of styrene–butadiene rubber and synthetic anatase obtained by a colloidal route and their photooxidation

Photodegradable styrene–butadiene rubber (SBR)/TiO₂ nanocomposites were prepared by a colloidal route through the simple mixing of a commercial polymer latex and synthetic anatase nanoparticles. Stable colloids of pure anatase TiO₂ nanoparticles with an average diameter of 7 nm were prepared by a solvothermal route from the hydrolysis of titanium alkoxide by hydrogen peroxide in the presence of oleic acid. The photocatalytic degradation of the SBR–TiO₂ nanocomposites was carried out in ambient air at room temperature under a UV lamp and was monitored by Fourier transform infrared and UV–visible spectroscopies and differential scanning calorimetry. The results show that the SBR–TiO₂ nanocomposites were photocatalytically degraded under UV light, which indicate that the butadiene chains in the nanocomposite were oxidized during UV irradiation. Thermal analysis measurements indicated that crosslinking reactions occurred. The presence of anatase TiO₂ nanoparticles was found to accelerate the photocatalytic process, and the degradation mechanism was similar to that of the pure SBR polymer. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Effects of carbon‐coated titanium dioxide nanoparticles as a photostabilizer on the photodegradation of rigid poly(vinyl chloride)

In this study, nanocomposites of rigid poly(vinyl chloride) (UPVC) using the synthesized carbon‐coated titanium dioxide (TiO₂) nanoparticles and commercial powder of titanium dioxide (with rutile structure) were prepared by melt blending. The presence of carbon‐coated TiO₂ nanoparticles with rutile structure in UPVC matrix led to an improvement in photo stability of UPVC nanocomposites in comparison with commercial UPVC. The photocatalytic degradation behavior of nanocomposites was investigated by measuring their structural changes, surface tension, and mechanical and morphological properties before and after UV exposure for 700 h. It was found that mechanical and physical properties of UPVC nanocomposites are not considerably reduced after UV exposure in the presence of carbon‐coated TiO₂ nanoparticles even in small percentage of nanoparticles in comparison with the presence of commercial TiO₂ particles. Therefore, it can be concluded that UPVC/TiO₂ nanocomposite with low content of carbon‐coated TiO₂ nanoparticles(0.25 wt %) illustrated high stability under light exposure. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40228.     

Preparation,characterization, and dynamic adsorption–desorption studies on polypyrrole encapsulated TiO2 nanoparticles

Binary doped polypyrrole (PPy) encapsulated Titania (TiO₂) nanoparticles were prepared by oxidative polymerization using FeCl₃ as oxidant in presence of camphorsulfonic acid (CSA) as surfactant. Both FeCl₃ (oxidant) and camphorsulfonic acid (surfactant) also act as dopant and hence thus prepared polypyrrole/Titania (TiO₂@PPy) is termed as binary doped nanocomposite i.e. FeCl₃ dopes polypyrrole by oxidation mechanism while camphorsulfonic acid dopes polypyrrole by protonic doping mechanism. The TiO₂@PPy coreshell nanocomposites were characterized by Fourier transform infrared spectroscopy (FTIR), X‐ray diffraction (XRD), thermogravimetry, differential scanning calorimetry (DSC), field emission‐scanning electron microscopy (FE‐SEM), and inductance‐capacitance‐resistance (LCR) measurements. The results indicated that the structural and electrical properties of the TiO₂@PPy coreshell nanocomposites were significantly influenced by the extent of TiO₂ nanoparticles loading of polypyrrole. The direct current (DC) electrical conductivity of the as‐prepared TiO₂@PPy coreshell nanocomposites was higher than that of PPy. As‐prepared TiO₂@PPy coreshell nanocomposites were also studied for their dielectric losses for alternating current (AC) which is useful characteristic for their application in the fabrication of charge storing devices. TiO₂@PPy coreshell nanocomposites showed synergistic effect of combining components in improving their alcohol sensing properties. This improvement may be attributed to the adsorption on and desorption from alcohols TiO₂@PPy interface of the nanocomposites and alcohol vapors causing decrease in depletion region. The TiO₂@PPy coreshell nanocomposites were observed to show better reproducibility of electrical conductivity and fast self‐recovery during the alcohol vapor sensing process. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43411.     

Preparation by melt mixing and characterization of isotactic polypropylene/SiO2 nanocomposites containing untreated and surface‐treated nanoparticles

In the present study two series of isotactic polypropylene (iPP)/SiO₂ nanocomposites containing 1, 2.5, 5, 7.5, and 10 wt % SiO₂ nanoparticles were prepared by melt‐mixing on a twin‐screw corotating extruder. In the first series untreated fumed silica nanoparticles were used, whereas in the second nanoparticles were surface‐treated with dimethyldichlorosilane. In both cases, the average size of the primary nanoparticles was 12 nm. Tensile and impact strength were found to increase and to be affected mainly by the type and content of silica nanoparticles. A maximum was observed, corresponding to samples containing 2.5 wt % SiO₂. These findings are discussed in light of the SEM and TEM observations. By increasing the amount of nanoparticles, large aggregates of fumed silica could be formed, which may explain the reduction of mechanical properties with higher concentrations of SiO₂. However, it was found that surface‐treated nanoparticles produced larger aggregates than did those derived from untreated nanoparticles, despite the increased adhesion of the iPP matrix, as was postulated from yield strength. This behavior negatively affected mechanical properties. In addition, an effort was made to determine if toughening theories, mainly the critical interparticle distance for rubber toughening or composites, also might be applicable in nanocomposites. From DSC measurements it was demonstrated that silica nanoparticles acted as effective nucleating agents, increasing the crystallization rate and the degree of crystallinity of iPP. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 2684–2696, 2006     

Fabrication of core–shell nanocomposites with enhanced photocatalytic efficacy

The current study establishes the unprecedented involvement in the evolution and production of novel core–shell nanocomposites composed of nanosized titanium dioxide and aniline‐o‐phenylenediamine copolymer. TiO₂@copoly(aniline and o‐phenylenediamine) (TiO₂@PANI‐o‐PDA) core–shell nanocomposites were chemically synthesized in a molar ratio of 5:1 of the particular monomers and several weights of nano‐TiO₂ via oxidative copolymerization. The construction of the TiO₂@PANI‐o‐PDA core–shell nanocomposites was ascertained from Fourier transform IR spectroscopy, UV–visible spectroscopy and XRD. A reasonable thermal behavior for the original copolymer and the TiO₂@PANI‐o‐PDA core–shell nanocomposites was investigated. The bare PANI‐o‐PDA copolymer was thermally less stable than the TiO₂@PANI‐o‐PDA nanocomposites. The core–shell feature of the nanocomposites was found to have core and shell sizes of 17 nm and 19–26 nm, respectively. In addition, it was found that the addition of a high ratio of TiO₂ nanoparticles increases the electrical conductivity and consequently lowers the electrical resistivity of the TiO₂@PANI‐o‐PDA core–shell nanocomposites. The hybrid photocatalysts exhibit a dramatic photocatalytic efficacy of methylene blue degradation under solar light irradiation. A plausible interpretation of the photocatalytic degradation results of methylene blue is also demonstrated. Our setup introduces a facile, inexpensive, unique and efficient technique for developing new core–shell nanomaterials with various required functionalities and colloidal stabilities. © 2018 Society of Chemical Industry     

Effects of nanosilica and titanium oxide on the performance of epoxy–amine nanocoatings

Different types of composite coatings were prepared by the blending of colloidal nanosilica (SiO₂) and titanium dioxide (TiO₂) in epoxy resin to investigate their coating performances. A fixed amount of silica nanoparticles (20 wt %) and different amounts (5, 10, and 15 wt %) of microsized TiO₂ particles were used in the coatings. The functional groups of the formulated coatings were confirmed by Fourier transform infrared spectroscopy. These results indicate that the SiO₂–TiO₂ particles interacted well with epoxy. Scanning electron microscopy images of the composite coatings revealed a good dispersion of TiO₂ particles at a lower amount of loading; this improved the adhesiveness, glass-transition temperature, thermal stability, and chemical resistance properties. At higher loadings, the performances decreased. The composite coatings were also characterized by their UV radiation-absorption properties with an ultraviolet–visible spectrophotometer. Interestingly, this property was found to be enhanced at higher loadings. An impressive result was noticed in the nanocomposites in terms of oxygen transmission rate performance compared to that of the neat epoxy. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47901.     

Synthesis and characterization of polypyrrole using TiO2 nanotube@poly(sodium styrene sulfonate) as dopant and template

A polypyrrole (PPy) using TiO₂ nanotube@poly(sodium styrene sulfonate) (TiO₂@PSS) as dopant and template was synthesized by chemical oxidation polymerization. The template TiO₂@PSS consisting of a TiO₂ nanotube core and PSS on the surface was prepared by a “grafting from” approach. PPy on the layer of TiO₂@PSS (TiO₂@PSS/PPy) was characterized by transmission electron microscopy, scanning electron microscopy, X‐ray photoelectron spectroscopy (XPS), Fourier‐transform infrared spectrometry (FTIR), Raman spectroscopic analysis, UV‐visible (UV‐vis) spectroscopy, thermo gravimetric analysis, and electrical conductivity analysis. Results showed that TiO₂@PSS/PPy was successfully fabricated. The electrical conductivity of the TiO₂@PSS/PPy nanocomposites at room temperature was 11.6 S cm⁻¹, which was higher than that of the PPy (4.2 S cm⁻¹). This result was consistent with those based on FTIR, UV‐vis spectroscopy, and XPS analyses. The nanocomposites have nanoparticle size and controllable morphology and thus potential applications in photoelectrochemical devices, photocatalytic devices, conductive inks, electronic printing sensors, and electrodes. POLYM. COMPOS., 37:462–467, 2016. © 2014 Society of Plastics Engineers     

Study of polystyrene/titanium dioxide nanocomposites via melt compounding for optical applications

This article presents the study of melt compounding of polystyrene (PS) with various types of titanium dioxide (TiO₂) nanoparticles and surfactants, using a corotating twin screw extruder with multiple screw element configurations. It was found that a properly designed high shear screw configuration and the copolymer of silicone, ethylene oxide, and propylene oxide‐based surfactant produced the greatest degree of nanoparticle dispersion in PS/TiO₂ nanocomposites, whereas a silane‐based surfactant and silicon dioxide (SiO₂) or aluminum oxide (Al₂O₃) coated TiO₂ nanoparticles yielded nanocomposites with the least photocatalytic degradation effects and the best retention of tensile and impact properties. POLYM. COMPOS., 28:241–250, 2007. © 2007 Society of Plastic Engineers