Synthesis of amphiphilic poly(methyl methacrylate)‐block‐poly(methacrylic acid) diblock copolymers by atom transfer radical polymerization

Atom transfer radical polymerization (ATRP) of 1‐(butoxy)ethyl methacrylate (BEMA) was carried out using CuBr/2,2′‐bipyridyl complex as catalyst and 2‐bromo‐2‐methyl‐propionic acid ester as initiator. The number average molecular weight of the obtained polymers increased with monomer conversion, and molecular weight distributions were unimodal throughout the reaction and shifted toward higher molecular weights. Using poly(methyl methacrylate) (PMMA) with a bromine atom at the chain end, which was prepared by ATRP, as the macro‐initiator, a diblock copolymer PMMA‐block‐poly [1‐(butoxy)ethyl methacrylate] (PMMA‐b‐PBEMA) has been synthesized by means of ATRP of BEMA. The amphiphilic diblock copolymer PMMA‐block‐poly(methacrylic acid) can be further obtained very easily by hydrolysis of PMMA‐b‐PBEMA under mild acidic conditions. The molecular weight and the structure of the above‐mentioned polymers were characterized with gel permeation chromatography, infrared spectroscopy and nuclear magnetic resonance. Copyright © 2005 Society of Chemical Industry     

Preparation of nanometer‐sized poly(methacrylic acid) particles in water‐in‐oil microemulsions

A water‐in‐oil microemulsion, water‐in‐cyclohexane stabilized by poly(ethylene glycol) tert‐octylphenyl, was developed to prepare poly(methacrylic acid) (PMAA) particles. Up to 100% conversion of the amphiphilic monomer, methacrylic acid (MAA), which could not be converted to the polymer efficiently in a dioctylsulfosuccinate sodium salt/toluene microemulsion, was achieved. The viscosity‐average molecular weight of the PMAA prepared was 1.45 × 10⁵ g/mol. The effects of some polymerization parameters, including the reaction temperature and the concentrations of the initiator and the monomer, on the polymerization of MAA were investigated. The results showed that the polymerization rate of MAA was slower than that of acrylamide in the microemulsions reported in the literature. The degree of conversion increased with the initiator concentration, reaction temperature, and monomer concentration. However, the stable microemulsions became turbid during the polymerization when the reaction temperature was at 70°C or at a high monomer concentration (40 wt %) The synthesized PMAA particles were spherical and had diameters in the range of ～50 nm. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 2497–2503, 2006     

Modification of polyester fabric properties by surfactant‐aided surface polymerization

Poly(methyl methacrylate) (PMMA) was applied to polyester fabric using a surface analog of emulsion polymerization. The admicellar polymerization was carried out using 1.5 mM dodecylbenzenesulfonic acid (DBSA) at pH 4 with 0.15M NaCl, 1 : 8 DBSA:monomer, and 1 : 10 initiator:monomer molar ratio. The PMMA film, which was formed, was characterized by SEM and FTIR. Hydrolysis of the PMMA film on polyester fabric was carried out to introduce carboxylic acid groups to the polyester surface to increase its hydrophilicity. The results show that a PMMA thin film was successfully formed on the polyester fabric. The water contact angle of the PMMA‐coated polyester fabric after hydrolysis by 10M H₂SO₄ for 5 h was reduced from 117.3° to 0° and there was a significant increase in the moisture‐regain value of the treated fabric. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 4059–4064, 2007     

Dispersion copolymerization of acrylonitrile‐vinyl acetate in supercritical carbon dioxide

Dispersion copolymerization of acrylonitrile‐vinyl acetate (AN‐VAc) had been successfully performed in supercritical carbon dioxide (ScCO₂) with 2,2‐azobisisobutyronitrile (AIBN) as a initiator and a series of lipophilic/CO₂‐philic diblock copolymers, such as poly(styrene‐r‐acrylonitrile)‐b‐poly(1,1,2,2‐tetrahydroperfluorooctyl methacrylate) (PSAN‐b‐PFOMA), as steric stabilizers. In dispersion copolymerization, poly(acrylonitrile‐r‐vinyl acetate) (PAVAc) was emulsified in ScCO₂ effectively using PSAN‐b‐PFOMA as a stabilizer. Compared with the precipitation polymerization (absence of stabilizer), the products prepared by dispersion polymerization possessed of higher yield and higher molecular weight. In addition, the particle morphology of precipitation polymerization was irregular, but the particle morphology of dispersion polymerization was uniform spherical particles. In this study, the effects of the initial concentrations of monomer and the stabilizer and the initiator, and the reaction pressure on the yield and the molecular weight and the resulting size and particle morphology of the colloidal particles were investigated. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 5640–5648, 2006     

Photo‐Induced atom transfer radical polymerization with nanosized α‐Fe2O3 as photoinitiator

Photo‐induced atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) was achieved in poly(ethylene glycol)‐400 with nanosized α‐Fe₂O₃ as photoinitiator. Well‐defined poly(methyl methacrylate) (PMMA) was synthesized in conjunction with ethyl 2‐bromoisobutyrate (EBiB) as ATRP initiator and FeCl₃·6H₂O/Triphenylphosphine (PPh₃) as complex catalyst. The photo‐induced polymerization of MMA proceeded in a controlled/living fashion. The polymerization followed first‐order kinetics. The obtained PMMA had moderately controlled number‐average molecular weights in accordance with the theoretical number‐average molecular weights, as well as narrow molecular weight distributions (M_w/M_n). In addition, the polymerization could be well controlled by periodic light‐on–off processes. The resulting PMMA was characterized by ¹H nuclear magnetic resonance and gel permeation chromatography. The brominated PMMA was used further as macroinitiator in the chain‐extension with MMA to verify the living nature of photo‐induced ATRP of MMA. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42389.     

Ultrasound‐assisted emulsion polymerization of poly(methyl methacrylate‐co‐butyl acrylate): Effect of initiator content and temperature

In this study, we propose an efficient method for preparation of large scale, monodisperse poly(methyl methacrylate‐co‐butyl acrylate) latexes by application of the low power ultrasound irradiation. The effect of polymerization temperature and initiator concentration on the polymerization nature, particle size, and particle size distribution were investigated. Results indicated that the ultrasound pulses in the first minutes of polymerization increase instant free radical to monomer ratio as well mixing efficiency which led to higher monomer conversion, improved polymerization rate (especially at first 15 min of the reaction), and remarkable decrease in molecular weight distribution. Transmittance electron microscopy (TEM) and dynamic light scattering (DLS) revealed that the particle size and particle size distribution were significantly affected, particle size decreased, and more uniform particles were obtained. Dynamic mechanical thermal analysis also showed that the initiator concentration affected glass transition temperature (T_g) of the final copolymers and in the case of ultrasound‐assisted emulsion polymerization T_g was in a very good agreement with theoretical predictions for copolymerization. POLYM. ENG. SCI., 56:214–221, 2016. © 2015 Society of Plastics Engineers     

Waste‐reducing preparation of PE‐g‐MAH and PE‐g‐DBM via solid phase grafting reaction and their application as compatibilizers

Kinetics for grafting two reactive monomers (dibutyl maleate (DBM) and maleic anhydride (MAH)) on polyethylene (PE) was investigated for the modified PE (PE‐g‐MAH and PE‐g‐DBM) using solid phase grafting process. This process avoided solvent waste produced in solution process and high operation temperature in melt process. In the presence of the radical initiator, coupling reactions, between the PE and product, and macromolecular radicals, routinely form gels and/or increase molecular weight, resulting in a worse rheological behavior for the grafting products. By adding small amount of interface agents, using combined initiators and optimizing reactor design, graft copolymers with controlled grafting degrees and good rheological properties were prepared. The grafting degrees of copolymers were determined by chemical analysis. FTIR, DSC, and pure water contact angle characterized the chemical structure, the thermal property, and the hydrophilic property of the grafting copolymers, respectively. The peel strength of the graft copolymer as powder coating on the stainless steel surface was measured as high as 12–24 kgf/cm. Mechanical strength and toughness of PE/kaolin clay, PVC/CPE, and PVC/CPE/CaCO₃ alloys with small amount of the graft copolymer (～5 wt %) added were improved significantly. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 3781–3790, 2006     

PVC modification through polymerization of a monomer absorbed in porous suspension‐type PVC particles

In‐situ polymerization is the polymerization of one monomer in the presence of another polymer. It can be performed by sequential emulsion polymerization, or by reactions in the melt, in the solid phase, or in solution. The current report describes two methods to obtain poly(vinyl chloride) (PVC) modification through polymerization of a monomer absorbed in commercial porous suspension‐type PVC particles. The generated modified PVC products differ significantly in their structure and properties. The first approach includes absorption of a monomer/peroxide solution within porous suspension‐type PVC particles, followed by polymerization/crosslinking in the solid state at 80°C in an aqueous stabilizer‐free dispersion. The monomer/crosslinker pairs selected are styrene/DVB (divinyl benzene), methylmethacrylate/EGDMA (ethylene glycol dimethacrylate), butyl acrylate/EGDMA, and ethylhexyl acrylate/EGDMA. The influence of composition and nature of the polymerizing/crosslinking constituents on the modified PVC particle structure was studied by microscopy methods, porosity measurements, and dynamic mechanical behavior (DMTA). The level of molecular grafting between PVC and the modifying polymer was determined by solvent extraction experiments. This work shows that the different monomers used represent distinct courses of monomer transport through the PVC particles. The characteristics of the modified PVC particle indicate that the polymerization/crosslinking process occurs in both the PVC bulk, i.e., within the walls constituting a particle, and in the PVC pores. No indication of chemical intermolecular interaction within the modified PVC particles was found. In the second approach, a solution of monomer, initiator, and a crosslinking agent is absorbed in commercial suspension‐type porous PVC particles, thus forming a dry blend. This dry blend is subsequently reactively polymerized in a twin‐screw extruder at an elevated temperature, 180°C, in the molten state. The properties of the reactively extruded PVC/PMMA blends are compared with those of physical blends at similar compositions. Owing to the high polymerization temperature, short‐chain polymers are formed in the reactive polymerization process. Reactively extruded PVC/PMMA blends are transparent, form single‐phase morphology, have a single T_g, and show mechanical properties comparable with those of the neat PVC. The resulting reactively extruded PVC/PMMA blends have high compatibility. J. Vinyl Addit. Technol. 10:109–120, 2004. © 2004 Society of Plastics Engineers.     

Graft copolymerization of methyl methacrylate from brominated poly(isobutylene‐co‐isoprene) via atom transfer radical polymerization

Commercial brominated poly(isobutylene‐co‐isoprene) (BIIR) rubber has been directly used for the initiation of atom transfer radical polymerization (ATRP) by utilizing the allylic bromine atoms on the macromolecular chains of BIIR. The graft copolymerization of methyl methacrylate (MMA) from the backbone of BIIR which was used as a macroinitiator was carried out in xylene at 85 °C with CuBr/N,N,N′,N″,N″‐pentamethyldiethylenetriamine as a catalytic complex. The polymerization conditions were optimized by adjusting the catalyst and monomer concentration to reach a higher monomer conversion and meanwhile suppress macroscopic gelation during the polymerization process. This copolymerization followed a first‐order kinetic behavior with respect to the monomer concentration, and the number‐average molecular weight of the grafted poly(methyl methacrylate) (PMMA) increased with reaction time. The resultant BIIR‐graft‐PMMA copolymers showed phase separation morphology as characterized by atomic force microscopy, and the presence of PMMA phase increased the polarity of the BIIR copolymers. This study demonstrated the feasibility of using commercial BIIR polymer directly as a macromolecular initiator for ATRP reactions, which opens more possibilities for BIIR modifications for wider applications. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43408.     

The use of amylose‐rich starch nanoparticles in emulsion polymerization

Regenerated starch nanoparticles (RSNPs) produced from dent corn, an amylose‐rich source of starch, are added to an emulsion polymerization. To reduce or eliminate the challenges of polymerizing in the presence of amylose‐rich starch, a seeded, semibatch, monomer‐starved approach is used. To prevent the accumulation of water soluble amylose in the aqueous phase, reaction with a hydrophobic compatibilizing monomer, butyl acrylate, is used prior to the primary butyl acrylate/methyl methacrylate/acrylic acid feed. In addition, an elevated initiator concentration is used in the seed stage to reduce the molecular weight of the soluble starch and promote grafting. The procedure yields a 100.0 cp latex with 40 wt % solids, 25 wt % RSNP loading, and 40 wt % incorporation. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46485.     

Cure‐on‐demand wood adhesive based on the frontal polymerization of acrylates

We demonstrated for the first time a cure‐on‐demand wood adhesive using thermal frontal polymerization with Southern Pine wood. Monomer structure, initiator loading, and filler loading all had an impact on the strength of the adhesive and the cure‐on‐demand ability. More flexible, ethoxylated monomers produced stronger adhesives; though, the ethoxylate groups reduce the ability of the system to be polymerized frontally. Addition of a highly reactive comonomer (acrylic acid) to increase molecular weight between crosslinks along with the ethoxylated triacrylate increased the propensity for frontal polymerization and made a tougher polymer. Increasing initiator loading could help ensure front propagation, but a maximum initiator loading was reached where the gaseous byproducts of the peroxide initiator made the network highly porous and thus lacking strength. Fillers such as kaolin and sawdust helped overcome decreases in strength at high initiator loadings. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44064.     

Solid and thermal properties of ABA‐type triblock copolymers designed using difunctional fluorine‐containing polyimide macroinitiators with methyl methacrylate

BACKGROUND: ABA‐type poly(methyl methacrylate) (PMMA) and fluorine‐containing polyimide triblock copolymers are potentially beneficial for electric materials. In the work reported here, triblock copolymers with various block lengths were prepared from fluorine‐containing difunctional polyimide macroinitiators and methyl methacrylate monomer through atom‐transfer radical polymerization. The effects of structure on their solid and thermal properties were studied. RESULTS: The weight ratios of the triblock copolymers derived using thermogravimetric analysis were shown to be almost identical to the ratios determined using ¹H NMR. The solid properties (film density and maximum d‐spacing value) and thermal properties (glass transition and thermal expansion) were shown to be strongly dependent on the weight ratios of both PMMA and polyimide components. Furthermore, a porous film, which showed a lower dielectric constant of 2.48 at 1 MHz, could be prepared by heating a triblock copolymer film to induce the thermal degradation of the PMMA component. CONCLUSION: The use of the polyimide macroinitiator was useful in the preparation of ABA‐type triblock copolymers to control each block length that influences the solid and thermal properties. Additionally, the triblock copolymers have great potential in preparing porous polyimides in the application of electric materials as interlayer insulation membranes of large‐scale integration. Copyright © 2009 Society of Chemical Industry     

Accelerant‐promoted free radical polymerization of methacrylates by stabilized nitroxide unimolecular initiators: synthesis and characterization

BACKGROUND: This investigation evaluates the effectiveness of initiator adducts for living and controlled polymerization of methacrylates, crosslinking of dimethacrylates and thermal stabilities of the resulting polymers. Adducts of 2,2,6,6‐tetramethyl‐1‐piperidinyloxy with benzoyl peroxide and with azobisisobutyronitrile were prepared and evaluated as stabilized unimolecular initiators for the free radical polymerization of methacrylate monomers using sulfuric acid as catalyst. The monomers used were methyl methacrylate, triethylene glycol dimethacrylate (TEGDMA) and ethoxylated bisphenol A dimethacrylate (EBPADMA). RESULTS: Successful polymerization was achieved at 70 and 130 °C with reaction times ranging from 45 min to 120 h. The dispersity (D) of poly(methyl methacrylate) (PMMA) was 1.09–1.28. The livingness and extent of control over polymerization were confirmed with plots of M_n evolution as a function of monomer conversion and of the first‐order kinetics. The glass transition temperature (T_g) for PMMA was 123–128 °C. The degradation temperature (T_d) for PMMA was 350–410 °C. T_d for poly(TEGMA) was 250–310 °C and for poly(EBPADMA) was 320–390 °C. CONCLUSION: The initiators are suitable for free radical living and controlled polymerization of methacrylates and dimethacrylates under mild thermal and acid‐catalyzed conditions, yielding medium to high molecular weight polymers with low dispersity, high crosslinking and good thermal stability. Copyright © 2008 Society of Chemical Industry     

Synthesis and characterization of AB‐type copolymers poly(L‐lactide)‐block‐poly(methyl methacrylate) via a convenient route combining ROP and ATRP from a dual initiator

Diblock copolymers of poly(L ‐lactide)‐block‐poly(methyl methacrylate) (PLLA‐b‐PMMA) were synthesized through a sequential two‐step strategy, which combines ring‐opening polymerization (ROP) and atom transfer radical polymerization (ATRP), using a bifunctional initiator, 2,2,2‐trichloroethanol. The trichloro‐terminated poly(L ‐lactide) (PLLA‐Cl) with high molecular weight (M_n,GPC = 1–12 × 10⁴ g/mol) was presynthesized through bulk ROP of L ‐lactide (L ‐LA), initiated by the hydroxyl group of the double‐headed initiator, with tin(II) octoate (Sn(Oct)₂) as catalyst. The second segment of the block copolymer was synthesized by the ATRP of methyl methacrylate (MMA), with PLLA‐Cl as macroinitiator and CuCl/N,N,N′,N″,N″‐pentamethyldiethylenetriamine (PMDETA) as catalyst, and dimethyl sulfoxide (DMSO) was chosen as reaction medium due to the poor solubility of the macroinitiator in conventional solvents at the reaction temperature. The trichloroethoxyl terminal group of the macroinitiator was confirmed by Fourier transform infrared spectroscopy (FTIR) and ¹H‐NMR spectroscopy. The comprehensive results from GPC, FTIR, ¹H‐NMR analysis indicate that diblock copolymers PLLA‐b‐PMMA (M_n,GPC = 5–13 × 10⁴ g/mol) with desired molecular composition were obtained by changing the molar ratio of monomer/initiator. DSC, XRD, and TG analyses establish that the crystallization of copolymers is inhibited with the introduction of PMMA segment, which will be beneficial to ameliorating the brittleness, and furthermore, to improving the thermal performance. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis of well‐defined comblike hydroxy‐functionalized atactic polystyrene promoted by metallocene/tin/poly(phenyl glycidyl ether)‐co‐formaldehyde

Well‐defined comblike atactic polystyrene functionalized with hydroxyl groups was synthesized via living/controlling radical polymerization promoted by metallocene complexes in the presence of poly(phenyl glycidyl ether)‐co‐formaldehyde as the initiator and Sn as a reducing agent. The effect of the polymerization conditions, such as the ratio of initiator to monomer, temperature, and polymerization time, and the structure of the metallocene complex on the polymerization process were investigated. The resulting polymers were characterized by gel permeation chromatography, multiangle laser light scattering, ¹H‐NMR, and ¹³C‐NMR. The results show that the polymer had a narrow molecular weight distribution in the range 1.1–1.4 and the number‐average molecular weight of the polymer linearly depended on the monomer conversion within the polymerization timescale, which confirmed that living radical polymerization characteristics prevailed in the polymerization process. Both the number of arms and the number of hydroxyl groups in each polymer molecule were about four, which suggested that they arose from the epoxy functional groups of the initiator. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Siloxane‐modified polyacrylate low‐residual pressure‐sensitive adhesive with high peeling strength

A low‐residual siloxane‐modified polyacrylate pressure‐sensitive adhesive (PSA) with a high peeling strength was prepared by seeded semicontinuous emulsion polymerization. 3‐Glycidyloxypropyltrimethoxysilane was introduced into the acrylic (AC) PSA through a thermal posttreatment method to crosslink with AC. To improve the adhesion properties, a polymeric emulsifier, 2‐acrylamido‐2‐methyl‐1‐propanesulfonic acid, was introduced into the system with the conventional emulsifier. Several key polymerization conditions, such as the initiator concentration, mass ratio of soft monomer to hard monomer, the content of polymeric emulsifier, and siloxane dosages were examined in detail. Then, the optimal conditions and a proper preparation process were established. The results show that we achieved not only a low repeeling residue with high tack and peeling strength but also excellent properties of high‐temperature aging resistance and water resistance. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 42975.     

Dispersion polymerization of acrylamide with 2‐acrylamido‐2‐methyl‐1‐propane sulfonate in aqueous solution

The copolymer of acrylamide (AM) and 2‐acrylamido‐2‐methyl‐1‐propane sulfonate (AMPS) was synthesized through the free radical dispersion polymerization in an aqueous solution of ammonium sulfate and in the presence of poly(2‐acrylamido‐2‐methyl‐1‐propane sulfonate) as stabilizer. The average particle size of the copolymer ranged from 1 to 4 μm, and the molecular weight was from 2.0 × 10⁶ to 7.0 × 10⁶ g mol^?1. By analyzing apparent viscosity and particle size, the swelling property of the dispersion copolymer was studied. When the dispersion was diluted with salt water in which the ammonium sulfate concentration kept equal with that of the original dispersion, particle size and particle size distribution of the diluted dispersion changed a little, compared with that of the original dispersion. While diluted with deionized water, particle size and particle size distribution could expand several times. The effects of varying concentrations of the stabilizer, the monomer, the salt and the initiator on particle size, and molecular weight of the copolymer were investigated, respectively. The reaction conditions for preparing stable dispersion were concentrations of 20–28% of the salt, 6–14% of monomers, and 1.8–2.7% of the stabilizer. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102:2379–2385, 2006     

Ring‐opening polymerization of trimethylenecarbonate and its copolymerization with ϵ‐caprolactone by lanthanide (II) aryloxide complexes

Lanthanide metal (II) 2,6‐di‐tert‐butylphenoxide complexes (ArO)₂Ln(THF)₃ (Ln = Sm 1 , Yb 2 ) alone have been developed to catalyze the ring‐opening polymerization of trimethylenecarbonate (TMC) and random copolymerization of TMC and ε‐caprolactone (ε‐CL) for the first time. The influence of reaction conditions, such as initiator, initiator concentration, polymerization temperature, and polymerization time, on monomer conversion, molecular weight, and molecular weight distribution of the resulting PTMC was investigated. It was found that the divalent complex 1 showed higher activity for the polymerization of TMC than complex 2 . The random structure and thermal behavior of the copolymers P(TMC‐co‐CL) have been characterized by ¹H NMR, ¹³C NMR, GPC, and DSC analysis. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Effect of acrylic monomer content on the properties of waterborne poly(urethane‐urea)/acrylic hybrid materials

Stable waterborne poly(urethane‐urea) (WBPU; soft segment content: 57%; dimethylol propionic acid: 19 mol %/5.8 wt %)–polyacrylate(methyl methacrylate/n‐butyl acrylate) (weight ratio: 4/1) hybrid latex (emulsions) with different acrylic contents [0, 10, 20, 30, and 40 wt % based on poly(urethane‐urea)] and without external surfactant were successfully prepared by in situ polymerization during a prepolymer mixing process. However, the as‐polymerized hybrid latex containing 50 wt % of acrylic monomer content was found to be unstable, indicating that about 50 wt % of acrylic monomer content was beyond the limit value of self‐emulsifying ability of WBPU anionomer prepared in this study. The breadth of particle size distribution of hybrid latex increased markedly from 20–75 to 55–275 nm with increasing acrylic monomer content from 0 to 40 wt %. The pristine WBPU and hybrid latex samples containing 10, 20, and 30 wt % of acrylic monomer showed unimodal distributions, whereas the hybrid sample having 40 wt % acrylic monomer content displayed a bimodal distribution with the broadest breadth. As acrylic monomer content increased, the yield point of stress–strain curve, hardness, glass transition, and water resistance of hybrid film samples increased, whereas their abrasion resistance, elongation at break, and elasticity decreased. The tensile strength of hybrid film samples (10–30 wt % of acrylic monomer content) was almost the same as that of pristine WBPU film sample, indicating the intimate molecular mixing between poly(urethane‐urea) and polyacrylate molecules in hybrids. However, the hybrid sample having 40 wt % acrylic monomer showed significantly diminished performance, which might be due to the deviation from intimate molecular mixing. From these results, the optimum acrylic monomer content was found to be about 30 wt %, which realized reasonably advantages of both poly(urethane‐urea) and acrylic polymer. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Polymerization of methyl methacrylate with a thermal iniferter: Diethyl 2,3‐dicyano‐2,3‐di(p‐tolyl)succinate

A hexa‐substituted ethane type compound, diethyl‐2,3‐dicyano‐2,3‐di(p‐tolyl)succinate (DCDTS), was successfully synthesized and used for initiation of methyl methacrylate (MMA) polymerization. The reaction demonstrated the characteristics of a “living” polymerization; i.e., both the yield and the molecular weight of the resulting polymers increased linearly with increasing reaction time, the molecular‐weight distribution of PMMA obtained was ～1.60 and almost unaffected by the conversion, and the resultant polymer can be chain extended by adding fresh MMA. End group analysis of the resultant PMMA confirmed that DCDTS behaves as a thermal iniferter for MMA polymerization. A block copolymer was prepared from the resultant PMMA, which contains a hexa‐substituted C? C bond functional end group. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 2566–2572, 2001