HEAT TRANSFER DUE TO MHD SLIP FLOW OF A SECOND-GRADE LIQUID OVER A STRETCHING SHEET THROUGH A POROUS MEDIUM WITH NONUNIFORM HEAT SOURCE/SINK

An analysis is carried out to study the heat transfer characteristics of a second-grade non-Newtonian liquid due to a stretching sheet through a porous medium under the influence of external magnetic field. The stretching sheet is assumed to be impermeable. Partial slip condition is used to study the flow behavior of the liquid. The effects of viscous dissipation, nonuniform heat source/sink on the heat transfer are addressed. The nonlinear partial differential equations governing momentum and heat transfer in the boundary layer are converted into nonlinear ordinary differential equations using similarity transformation. Analytical solutions are obtained for the resulting boundary value problems in the case of two types of boundary heating, namely, constant surface temperature (CST) and prescribed surface temperature (PST). The effects of slip parameter, second-grade liquid parameter, combined (magnetic and porous) parameter, Prandtl number, Eckert number, and nonuniform heat source/sink parameters on the heat transfer are shown in several plots. Analytical expressions for the wall frictional drag coefficient and wall temperature gradient are obtained.     

Effects of radiation and heat source/sink on unsteady MHD boundary layer flow and heat transfer over a shrinking sheet with suction/injection

In this paper, an investigation is made to study the effects of radiation and heat source/sink on the unsteady boundary layer flow and heat transfer past a shrinking sheet with suction/injection. The flow is permeated by an externally applied magnetic field normal to the plane of flow. The self-similar equations corresponding to the velocity and temperature fields are obtained, and then solved numerically by finite difference method using quasilinearization technique. The study reveals that the momentum boundary layer thickness increases with increasing unsteadiness and decreases with magnetic field. The thermal boundary layer thickness decreases with Prandtl number, radiation parameter and heat sink parameter, but it increases with heat source parameter. Moreover, increasing unsteadiness, magnetic field strength, radiation and heat sink strength boost the heat transfer.     

Thermal Diffusion and MHD Effects on Combined Free‐Forced Convection and Mass Transfer of a Viscous Fluid Flow Through a Porous Medium with Heat Generation

The problem of thermal diffusion and magnetic field effects on combined free‐forced convection and mass transfer flow past a vertical porous flat plate, in the presence of heat generation is studied numerically. The governing momentum, energy and concentration equations are converted into a system of nonlinear ordinary differential equations by means of similarity transformations. The resulting system of coupled nonlinear ordinary differential equations is solved numerically by using the Shooting method. Numerical results are presented for velocity, temperature and concentration profiles within the boundary layer for different parameters of the problem including suction parameter, heat generation parameter, Soret number, Dufour number, magnetic parameter, etc. In addition, the effects of the pertinent parameters on the skin friction and the rates of heat and mass transfer are discussed numerically and illustrated graphically.     

MHD flow and heat transfer of a micropolar fluid over a nonlinear stretching surface with variable surface heat flux and heat generation

An analysis has been carried out to study magnetohydrodynamic boundary layer flow and heat transfer of an electrically conducting micropolar fluid over a nonlinear stretching surface with variable wall heat flux in the presence of heat generation/absorption and a non‐uniform transverse magnetic field. The governing system of partial differential equations is first transformed into a system of ordinary differential equations using similarity transformation. The transformed equations are solved numerically. Results for the dimensionless velocity, micro‐rotation, and temperature profiles are displayed graphically delineating the effects of various parameters characterising the flow. The results show that the velocity profile decreases as the magnetic parameter and the velocity exponent increase, while it increases as the material parameter increases. The results show also that the temperature profile increases as the magnetic parameter, the velocity exponent, and the heat generation parameter increase. Furthermore, the temperature profile decreases as the material parameter, the heat absorption parameter, and the Prandtl number increase.     

RADIATION EFFECTS ON MHD AXISYMMETRIC STAGNATION POINT FLOW TOWARDS A HEATED SHRINKING SHEET

In this article, a comprehensive numerical study of MHD axisymmetric stagnation point flow with radiation effects towards a heated shrinking sheet immersed in an electrically conducting incompressible viscous fluid in the presence of a transverse magnetic field is analyzed. The governing continuity, momentum, and heat equations together with the associated boundary conditions are first transformed to a set of self-similar nonlinear ordinary differential equations and are then solved by a method based on finite difference discretization. Some significant features of the flow and heat transfer in terms of normal and horizontal velocities and temperature field for various values of the governing parameters are analyzed, discussed, and presented through tables and graphs. The present investigations predict that the shear stresses increase and the thermal boundary layer becomes thinner by applying a strong magnetic field. The heat loss per unit area from the sheet decreases with an increase in the shrinking parameter. The thermal boundary layer thickness decreases with increasing values of the radiation parameter. The present results may be beneficial in flow and thermal control of polymeric processing.     

Combined effects of internal heat generation and buoyancy force on boundary layer flow over a vertical plate with a convective surface boundary condition

This paper considers the effect of buoyancy force and internal heat generation on laminar thermal boundary layer over a vertical plate with a convective surface boundary condition. We assumed that left surface of the plate is in contact with a hot fluid while a stream of cold fluid flows steadily over the right surface with a heat source that decays exponentially. Using a similarity variable, the steady state governing non‐linear partial differential equations have been transformed into a set of coupled non‐linear ordinary differential equations, which are solved numerically by applying shooting iteration technique together with fourth order Runge–Kutta integration scheme. The effects of Prandtl number, local Biot number, the internal heat generation parameter and the local Grashof number on the velocity and temperature profiles are illustrated and interpreted in physical terms. A comparison with previously published results on special case of the problem shows excellent agreement. From our results, an overshoot of fluid velocity within the boundary layer is observed due to combined effect of buoyancy force and internal heat generation, in addition, internal heat generation causes thickening of thermal boundary layer. © 2011 Canadian Society for Chemical Engineering     

THE EFFECTS OF VARIABLE FLUID PROPERTIES ON MHD MAXWELL FLUIDS OVER A STRETCHING SURFACE IN THE PRESENCE OF HEAT GENERATION/ABSORPTION

An analysis is performed to investigate the effects of variable viscosity and thermal conductivity on the two-dimensional steady flow of an electrically conducting, incompressible, upper-convected Maxwell fluid in the presence of a transverse magnetic field and heat generation or absorption. The governing system of partial differential equations is transformed into a system of coupled nonlinear ordinary differential equations, and is solved numerically. Velocity and temperature fields have been computed and shown graphically for various values of the physical parameters. The local skin-friction coefficient and the local Nusselt number have been tabulated. It is found that fluid velocity decreases with an increase in the viscosity parameter and the Deborah number. It is also observed that increasing the magnetic parameter leads to a fall in the velocity and a rise in the temperature. Furthermore, it is shown that the temperature increases due to increasing the values of the thermal conductivity parameter and the heat generation parameter, while it decreases with an increase of both the absolute value of the heat absorption parameter and the Prandtl number.     

BOUNDARY LAYER FLOW AND DOUBLE DIFFUSION OVER AN UNSTEADY STRETCHING SURFACE WITH HALL EFFECT

The present investigation is concerned with the effect of Hall currents on boundary layer flow, and heat and mass transfer of an electrically conducting fluid over an unsteady stretching sheet in the presence of a strong magnetic field. The electron-atom collision frequency is assumed to be relatively high, so that the Hall effect is assumed to exist, while the induced magnetic field is neglected. The governing time-dependent boundary layer equations for momentum, thermal energy, and concentration are reduced using a similarity transformation to a set of coupled ordinary differential equations. The similarity ordinary differential equations are then solved numerically by the successive linearization method together with the Chebyshev pseudo-spectral collocation method. Effects of the Prandtl number, Pr, Schmidt number, Sc, magnetic field, M, Hall parameter, m, and the unsteadiness parameter, A, on the velocity, temperature, and concentration profiles as well as the local skin friction coefficient and the heat and mass transfer rates are depicted graphically and/or in tabular form. Favorable comparisons with previously published work on various special cases of the problem are also obtained.     

UNSTEADY HYDROMAGNETIC FREE CONVECTION FLOW OF A DISSIPATIVE AND RADIATING FLUID PAST A VERTICAL PLATE WITH CONSTANT HEAT FLUX

The effect of thermal radiation absorption on an unsteady free convective flow past a vertical plate is studied in the presence of a magnetic field and constant wall heat flux. Boundary layer equations are derived, and the resulting approximate nonlinear ordinary differential equations are solved analytically using asymptotic technique. A parametric study of all parameters involved is conducted, and a representative set of numerical results for the velocity and temperature profiles as well as the skin-friction parameter are illustrated graphically to show typical trends of the solutions.     

UNSTEADY FLUID AND HEAT FLOW INDUCED BY A STRETCHING SHEET WITH MASS TRANSFER AND CHEMICAL REACTION

The effect of chemical reaction on the flow, heat, and mass transfer within a viscous fluid on an unsteady stretching sheet is examined. The stretching rate, temperature and concentration of the sheet, and the chemical reaction rate are assumed to vary with time. The time-dependent boundary layer equations governing the flow are reduced through a convenient similarity transformation to a set of ordinary differential equations, which are numerically solved by applying the fourth-order Runge-Kutta-Fehlberg scheme with the shooting technique. Results for the velocity, temperature, and concentration distributions as well as the wall temperature and concentration gradients are presented graphically for various values of the unsteadiness parameter A, Prandtl number Pr, Schmidt number Sc, and chemical reaction parameter γ.     

NETWORK NUMERICAL SIMULATION OF HYDROMAGNETIC MARANGONI MIXED CONVECTION BOUNDARY LAYERS

The study of a steady coupled dissipative layer, known as the Mangaroni mixed convection boundary layer, in the presence of a magnetic field is presented. The mixed convection boundary layer is generated when in addition to Marangoni (thermocapillary) effects there are also buoyancy effects due to gravity and external pressure gradient effects. In the model considered the Marangoni coupling condition has been included in the boundary conditions at the interface. Similarity transformations are utilized to transform the governing partial differential conservation equations into nondimensional ordinary differential equations in a single independent space variable (η) and solved using the network simulation method (NSM) using an electronic circuit simulator, Pspice. NSM is founded on the classical thermoelectric analogy between thermal and electrical variables. A set of finite-differential equations, one for each control volume, was obtained by spatial discretization of the transformed equations. The solutions obtained are compared with earlier computations using other numerical techniques, showing excellent agreement. The influence of the Marangoni mixed parameter and Hartmann number on the velocity and temperature functions are studied in detail. The effectiveness of utilizing magnetic fields to control heat transfer in Marangoni convection boundary layers is identified. An increase in Hartmann hydromagnetic number (M) is found to strongly decelerate the flow but increase temperatures. An increase in Marangoni mixed convection parameter (λ) for the scenario opposing Marangoni flow (Γ > 0) considerably accelerates the flow but decreases temperatures in the boundary layer. Conversely, an increase in Marangoni mixed convection parameter (λ) for the case favorable to the Marangoni flow (Γ < 0) decelerates the flow but enhances temperatures in the boundary layer. Applications of the model include semiconductor crystal hydromagnetic heat transfer control.     

Unsteady flow and heat transfer on an accelerating surface with blowing or suction in the absence and presence of a heat source or sink

The problem of unsteady flow and heat transfer in the laminar boundary layer on a linearly accelerating surface with suction or blowing in the absence and presence of a heat source or sink is considered. The governing partial differential equations for this investigation are transformed into the non-dimensional equations by using pseudo-similarity time and pseudo-similarity coordinate. The resulting two points boundary-value problem is solved numerically by the central finite difference method associated with Newton's iteration from the initial stage (ξ=0) to a steady state (ξ=1) completely. A parametric study is performed to illustrate the effects of Prandtl number, power-law surface temperature (PLST) or power-law heat flux (PLHF), heat sink or heat source, and suction or blowing parameter on the dynamic velocity and temperature fields as well as the transient development of the skin-friction coefficients and the Nusselt number. These results are depicted graphically to display special aspects of unsteady flow and heat transfer characteristics in all time.     

EFFECTS OF HALL CURRENT AND CHEMICAL REACTION ON OSCILLATORY MIXED CONVECTION-RADIATION OF A MICROPOLAR FLUID IN A ROTATING SYSTEM

This article is concerned with the analysis of the effects of thermal radiation on oscillatory mixed convection flow of a micropolar fluid in a rotating frame of reference in the presence of transverse magnetic field and Hall current. The influence of a first-order homogeneous chemical reaction and heat source effects is also analyzed. The governing partial differential equations with the appropriate boundary conditions are reduced to a set of ordinary differential equations using similarity transformations. The dimensionless governing equations for this investigation are solved analytically after using small perturbation approximation. The effects of various parameters on the velocity, temperature, and concentration fields as well as on skin-friction coefficient, Nusselt number, and Sherwood number with their amplitude and phase are discussed in detail. Numerical results are discussed with the help of graphs and tables. Present results are also compared with previously published work.     

HYDROMAGNETIC STAGNATION POINT FLOW TOWARDS A POROUS STRETCHING SHEET WITH VARIABLE SURFACE HEAT FLUX IN THE PRESENCE OF HEAT GENERATION

The influence of heat generation or absorption on the steady, two-dimensional flow of an electrically conducting fluid near a stagnation point on a stretching permeable surface with variable surface heat flux in the presence of a magnetic field is investigated. The governing system of partial differential equations describing the problem are converted into highly non-linear ordinary differential equations using similarity transformation. Numerical solutions of these equations are obtained using the fourth-order Runge-Kutta integration scheme with the shooting method. The effects of the heat generation or absorption parameter and the velocity ratio parameter on the velocity and the temperature are displayed graphically and discussed. The numerical values of the local skin-friction coefficient and the local Nusselt number for various values of physical parameters are presented through tables and discussed.     

MHD FLOW WITH SLIP EFFECTS AND TEMPERATURE-DEPENDENT HEAT SOURCE IN A VERTICAL WAVY POROUS SPACE

This study examines the problem of MHD flow in a vertical wavy porous space in the presence of a temperature-dependent heat source with slip-flow boundary condition. The equations of momentum, energy, and concentration are subject to a set of appropriate boundary conditions assuming that the solution consists of two parts: a mean part and a perturbed part. The solution of the perturbed part has been obtained by using the long-wave approximation. The mean part (zeroth-order), first-order velocity, and the total solution of the problem have been evaluated numerically for several sets of values of the parameters relating to the problem. The skin friction and the rate of heat and mass transfer coefficients at the walls are obtained and illustrated graphically.     

THE EFFECT OF THERMAL RADIATION ON THE HEAT AND MASS TRANSFER FLOW OF A VARIABLE VISCOSITY FLUID PAST A VERTICAL POROUS PLATE PERMEATED BY A TRANSVERSE MAGNETIC FIELD

The effect of temperature-dependent viscosity on free convective flow past a vertical porous plate is studied in the presence of a magnetic field, thermal radiation, and a first-order homogeneous chemical reaction. Boundary layer equations are derived and the resulting approximate nonlinear ordinary differential equations are solved numerically by the shooting method. A parametric study of all parameters involved is conducted, and a representative set of numerical results for the velocity and temperature profiles as well as the skin-friction parameter and the Nusselt and Sherwood numbers is illustrated graphically to show typical trends of the solutions. The dynamic viscosity in this study is taken as a function of the temperature although the Prandtl number is considered constant.     

MHD FLOW AND HEAT TRANSFER IN A VISCOUS FLUID OVER A NON-ISOTHERMAL STRETCHING SURFACE WITH THERMAL RADIATION IN SLIP-FLOW REGIME

The present work is concerned with the effects of surface slip conditions and thermal radiation on an electrically conducting fluid over a non-isothermal stretching surface in the presence of a uniform transverse magnetic field. Similarity transformation is used to transform the partial differential equations describing the problem into a system of nonlinear ordinary differential equations, which is solved analytically. The effects of various parameters on the velocity and temperature profiles as well as on the local skin-friction and the local Nusselt number are discussed in detail and displayed through graphs.     

A STUDY OF NON-NEWTONIAN FLOW AND HEAT TRANSFER OVER A NON-ISOTHERMAL WEDGE USING THE HOMOTOPY ANALYSIS METHOD

The thermoconvective boundary layer flow of a generalized third-grade viscoelastic power-law non-Newtonian fluid over a porous wedge is studied theoretically. The free stream velocity, the surface temperature variations, and the injection velocity at the surface are assumed variables. A similarity transformation is applied to reduce the governing partial differential equations for mass, momentum, and energy conservation to dimensionless, nonlinear, coupled, ordinary differential equations. The homotopy analysis method (HAM) is employed to generate approximate analytical solutions for the transformed nonlinear equations under the prescribed boundary conditions. The HAM solutions, in comparison with numerical solutions (fourth-order Runge-Kutta shooting quadrature), admit excellent accuracy. The residual errors for dimensionless velocity and dimensionless temperature are also computed. The influence of the “power-law” index on flow characteristics is also studied. The mathematical model finds important applications in polymeric processing and biotechnological manufacture. HAM holds significant promise as an analytical tool for chemical engineering fluid dynamics researchers, providing a robust benchmark for conventional numerical methods.     

Hydromagnetic non‐Darcy flow,heat and mass transfer over a stretching sheet in the presence of thermal radiation and Ohmic dissipation

A numerical analysis has been carried out to study magnetohydrodynamic boundary layer flow, heat and mass transfer characteristics on steady two‐dimensional flow of an electrically conducting fluid over a stretching sheet embedded in a non‐Darcy porous medium in the presence of thermal radiation and viscous dissipation. The governing partial differential equations are convected into a system of nonlinear ordinary differential equations by similarity transformation and are solved numerically by using the Successive linearisation method, together with the Chebyshev pseudo‐spectral collocation method. The effects of various parameters on the velocity, temperature, and concentration fields as well as on the skin‐friction coefficient are presented graphically and in tabular forms.     

Boundary layer flow past a stretching/shrinking surface beneath an external uniform shear flow with a convective surface boundary condition in a nanofluid

The problem of a steady boundary layer shear flow over a stretching/shrinking sheet in a nanofluid is studied numerically. The governing partial differential equations are transformed into ordinary differential equations using a similarity transformation, before being solved numerically by a Runge-Kutta-Fehlberg method with shooting technique. Two types of nanofluids, namely, Cu-water and Ag-water are used. The effects of nanoparticle volume fraction, the type of nanoparticles, the convective parameter, and the thermal conductivity on the heat transfer characteristics are discussed. It is found that the heat transfer rate at the surface increases with increasing nanoparticle volume fraction while it decreases with the convective parameter. Moreover, the heat transfer rate at the surface of Cu-water nanofluid is higher than that at the surface of Ag-water nanofluid even though the thermal conductivity of Ag is higher than that of Cu.