RAPID Operator-Free Fast Reactor Concept without Any Control Rods Reactor Concept and Plant Dynamics Analyses

The 1,000kWe metal fueled sodium-cooled fast reactor concept “RAPID” to achieve highly automated reactor operation has been demonstrated. RAPID (Refueling by All Pins Integrated Design) is designed for a terrestrial power system which enables quick and simplified refueling. It is one of the successors of the RAPID-L, the operator-free fast reactor concept designed for lunar base power system. The essential feature of the RAPID concept is that the reactor core consists of an integrated fuel assembly instead of conventional fuel subassemblies. In this small-size reactor core, 14,000 fuel pins are integrated and encased in a fuel cartridge. Refueling is conducted by replacing a fuel cartridge. The reactor can be operated without refueling for up to 10 years.

Unique challenges in reactivity control systems design have been addressed in the RAPID concept. The reactor has no control rod but involves the following innovative reactivity control systems: lithium expansion modules (LEM) for inherent reactivity feedback, lithium injection modules (LIM) for inherent ultimate shutdown, and lithium release modules (LRM) for automated reactor startup. All these systems adopt ⁶Li as a liquid poison instead of B₄C rods. In combination with LEMs, LIMs and LRMs, RAPID can be operated without an operator. In this paper, the RAPID reactor concept and its transient characteristics are presented.     

Azcatl-CRP: An ant colony-based system for searching full power control rod patterns in BWRs

We show a new system named AZCATL-CRP to design full power control rod patterns in BWRs. Azcatl-CRP uses an ant colony system and a reactor core simulator for this purpose. Transition and equilibrium cycles of Laguna Verde Nuclear Power Plant (LVNPP) reactor core in Mexico were used to test Azcatl-CRP. LVNPP has 109 control rods grouped in four sequences and currently uses control cell core (CCC) strategy in its fuel reload design. With CCC method only one sequence is employed for reactivity control at full power operation. Several operation scenarios are considered, including core water flow variation throughout the cycle, target different axial power distributions and Haling conditions. Azcatl-CRP designs control rod patterns (CRP) taking into account safety aspects such as k_eff core value and thermal limits. Axial power distributions are also adjusted to a predetermined power shape.     

Reactivity Control Method for Extended Burnup of Boiling Water Reactor Fuel Bundles

Abstract

A reactivity control method was proposed for a boiling water reactor (BWR) fuel bundle, which has a potential for higher burnup with an increase in fuel enrichment. The new method optimized the distribution and amount of nonboiling water area in a fuel bundle in order to enhance the reactivity control capacity.

Using the method, a 9×9 lattice fuel bundle with a small-sized channel box, large-sized water rods and a reduced fuel rod diameter was proposed for the discharged burnup of 70 GWd/t and the operational cycle length of 18 months. The core, which consists of the proposed fuel bundles with the bundle-averaged enrichment of 5.8% and includes other modifications concerning a neutron low leakage loading pattern, natural uranium axial blankets, and spectral shift with recirculation flow control, has a cold shutdown margin greater than the design limit (1%Δk) with minimum fuel bundle shuffling. Further, it has potentials for natural uranium savings of about 20% per unit power and reduction in the amount of reprocessing of about 60% per unit power, compared with current BWR designs.     

Self-Limiting Power Excursion Characteristics of Light Water Reactor, (I)

The Doppler limited power excursion characteristics of a light water reactor and the shutdown mechanism by scram were analyzed on the Hitachi Training Reactor (HTR). For the purpose of the pulse operation tests, modifications were applied to the HTR to provide pulsing capability; a pulse rod was added, together with a back up device for shutdown, and provision of three instrumented fuel assemblies, equipped with thermocouples; the Al-clad fuel rods were replaced by stainless steel clad rods.

About 100 runs of pulse operation tests were performed in fullest security with reactivity insertions ranging up to 1.0 % Δk/k, in which last case the peak power reached 38 MW, with a reactor period of 29 msec.     

Experimental Results of Some Cluster Tests in NSRR

The NSRR programme is in progress in JAERI using a pulsed reactor to evaluate the behavior of reactor fuels under reactivity accident conditions. This report describes briefly the experimental results and preliminary analysis of two cluster tests.

In the cluster configuration of five fuel rods, the power distribution in outer fuel rods are not symmetric due to neutron absorption in central fuel rod. The cladding temperature on the exterior boundaries of the cluster is higher than that in interior. Good agreement was obtained between the calculated and measured cladding temperature histories. In the 3.8$ excess reactivity test, cluster averaged energy deposition of 237 cal/g-UO₂, cladding melting and deformation were limited to the portions of the fuel rods that were on the exterior boundaries of the cluster.     

Heavy Water Zero Power Reactor (HWZPR) mixed core first criticality,calculation and experiments

HWZPR original fuel is natural U metal fuel but other kinds of fuel can also be utilized. In a research work on UO₂ fuel, reactor fuel was partially replaced by natural UO₂ fuel and physical parameters of the new core were compared with original core. Thirty six natural U metal fuel rods were substituted by natural UO₂ fuel assemblies. Prior to the first criticality operation with the new core, it was simulated by stochastic and deterministic calculation methods i.e. MCNP-4C and WIMS-CITATON codes, respectively. In order to investigate criticality and safety of the mixed core, important reactor physics parameters such as effective multiplication factor (K_eff) at different water levels, critical water level, reactivity worth of D₂O and reactivity worth of safety and control rods were calculated.The calculated results ensured reactor criticality and satisfied reactor safety criteria. Therefore, with the permission of the reactor safety committee, the first criticality operation was performed successfully. Later, during a series of reactor operations important physical parameters were measured experimentally. There is good consistency between the theoretical and experimental results.     

轻水堆含钆燃料棒稳态辐照行为分析

国内外的压水堆燃料组件最新设计中,广泛采用钆燃料（UO₂-Gd₂O₃）作为可燃毒物来控制初始反应性和展平堆芯功率分布。钆燃料棒的性能与普通燃料棒存在较大差异,本文利用燃料元件性能分析程序FRAPCON-3.5对BR3堆内含钆燃料棒性能进行计算,并与实验测量值进行比较。结果表明：FRAPCON-3.5对含钆燃料棒的计算结果与实验测量值符合较好;含钆燃料棒在辐照初期强化了燃料棒自屏效应,对燃料的径向功率分布影响显著;在平均功率密度相同的情况下,燃料中加入钆会导致热导率降低,芯块温度升高;钆含量不同,裂变气体释放及燃料和包壳的变形略有差异。     

Reactivity control technique for a pressurized water reactor with an inventive TRISO fuel particle composition

In this research paper a reactivity control technique has been suggested for the conceptual design of a compact sized pressurized water reactor (PWR) core with an inventive tristructural-isotropic (TRISO) fuel particle composition. This conceptual design is a light water cooled and moderated reactor which utilizes TRISO fuel particles in PWR technology. The use of TRISO fuel in PWR technology improves integrity of the design due to its fission fragments retention ability. The fuel provides first retention barrier within fuel itself against the release of fission fragments that makes this design concept safer and environment friendly. The suggested TRISO fuel particle composition has a small amount of Pu-240 with 2.0 w/o in the place of U-238 which acts as reactivity suppressor. Reactor codes WIMS-D/4 and CITATION have been used for simulation and core design modeling. Results reveals that the amount of excess reactivity can be reduced significantly by using a small amount of Pu-240 in TRISO fuel which in turns reduces the number of gadolinia rods in the core required for excess reactivity control and completely eliminates the requirement of soluble boron system. Therefore the effective and optimal use of reactivity suppressor and burnable poison suppresses and flattens the core excess reactivity throughout the core life and hence number of control rods can be reduced without compromising on the shutdown margin.     

基于SCIENCE程序包的IFBA组件模型的可行性研究

表面涂有一薄层硼化锆的一体化燃料可燃吸收体(IFBA)被用作轻水堆UO2燃料组件的反应性控制。法国AREVA公司开发的SCIENCE程序包具有模拟IFBA组件的能力,但其模拟精度需经标定。本文利用APOLLO2-F程序建立IFBA组件模型和不含IFBA组件模型,研究了组件的无限增殖因数k∞及IFBA价值,并与西屋公司结果进行比较。分析了燃料和包壳温度的处理方法以及数据库的差异对结果的影响。利用硼化锆密度修正因子评估IFBA价值偏差对堆芯参数和功率分布等的影响。结果表明:SCIENCE计算的k∞及IFBA价值与西屋公司的结果符合较好,低燃耗区SCIENCE计算的价值偏小2%。装载8个104根IFBA棒组件的堆芯,组件相对功率最大偏差约为1%;硼浓度、功率峰因子FQ和焓升因子FΔH的变化均不到0.1%,可忽略。先导组件采用28根或更少的IFBA棒时,可直接采用SCIENCE程序进行计算。     

Assessment of fuel conversion from HEU to LEU in the Syrian MNSR reactor using the MCNP code

Assessment of fuel conversion from high enriched uranium (HEU) to low enriched uranium (LEU) fuel in the Syrian MNSR reactor was conducted in this paper. Three 3-D neutronic models for the Syrian MNSR reactor using the MCNP-4C code were developed to assess the possibility of fuel conversion from 89.87% HEU fuel (UAl₄–Al) to 19.75% LEU fuel (UO₂). The first model showed that 347 fuel rods with HEU fuel were required to obtain a reactor core with 5.17 mk unadjusted excess reactivity. The second model showed that only 200 LEU fuel rods distributed in the reactor core like the David star figure were required to obtain a reactor core with 4.85 mk unadjusted excess reactivity. The control rod worth using the LEU fuel was enhanced. Finally, the third model showed that distribution of 200 LEU fuel rods isotropically in the 10 circles of the reactor core failed to convert the fuel since the calculated core unadjusted excess reactivity for this model was 10.45 mk. This value was far beyond the reactor operation limits and highly exceeded the current MNSR core unadjusted excess reactivity (5.17 mk).     

Single-pass core design of a low-temperature Super LWR

A supercritical-pressure light water cooled and moderated reactor (Super LWR) with a single-pass flow scheme is developed for simplifying upper core structures. Both coolant in the fuel channels and the water rods flow upward and are mixed in the upper plenum. It eliminates the moderator guide/distribution tubes in the upper core that were used in the previous Super LWR design adopting two-pass coolant flow scheme. This core design adopts a four-batch fuel management scheme and an out–in fuel loading pattern. One hundred and twenty-one fuel assemblies with an active height of 3.7 m are included. The flow rate fraction for water rods is 3.5%, and the thermal insulator is used to keep the moderator temperature below pseudocritical temperature. The equilibrium core is analyzed by using neutronic and thermal-hydraulic coupled calculation. The results show that the maximum cladding surface temperature (MCST) is limited to 485 °C with the average outlet temperature of 400 °C. The inherent safety is fulfilled by the positive water density reactivity coefficient and sufficient shutdown margin. On the other hand, the investigation of average outlet coolant temperature varying with MCST is carried out to explore the maximum outlet temperature by employing current MCST criterion and single-pass core design. The average outlet temperature increases with the MCST, and it achieves 465 °C with the thermal efficiency of 43.1% at the MCST criterion of 650 °C. The structure inside the reactor pressure vessel is simplified as a pressurized water reactor.     

Development of Hydride Absorber for Fast Reactor—Evaluation of Design Method for Hydride Absorber Rod—

A hydride control rod is being developed to improve the economy of fast reactor plants because it has a longer lifetime than the currently used B₄C control rod. A hydride burnable poison rod is also under development to reduce the number of control rods by decreasing core excess reactivity. Hydrogen in the hydride control rod causes neutron spectrum interference between the fuel and control rod regions. Thus, the study on core design was performed with the continuous-energy Monte Carlo code MVP using the nuclear data library JENDL-3.3 to deal with this phenomenon precisely. To evaluate the applicability of MVP to hydride absorber rod design, two benchmark calculations were carried out. One of them is a hydrogen-contained metal fuel fast core constructed in Fast Critical Assembly (FCA) and the other is the Nuclear Safety Research Reactor (NSRR) core where zirconium-hydride fuel (U-ZrH_1.6) rods are loaded. These benchmark calculations and the design study on a fast reactor core with hafnium-hydride control rods have revealed that MVP is a reliable tool for hydride absorber rod design.     

A small long-cycle PWR core design concept using fully ceramic micro-encapsulated (FCM) and UO2–ThO2 fuels for burning of TRU

In this paper, a new small pressurized water reactor (PWR) core design concept using fully ceramic micro-encapsulated (FCM) particle fuels and UO₂–ThO₂ fuels was studied for effective burning of transuranics from a view point of core neutronics. The core of this concept rate is 100 MWe. The core designs use the current PWR-proven technologies except for a mixed use of the FCM and UO₂–ThO₂ fuel pins of low-enriched uranium. The significant burning of TRU is achieved with tri-isotropic particle fuels of FCM fuel pins, and the ThO₂–UO₂ fuel pins are employed to achieve long-cycle length of ～4 EFPYs (effective full-power year). Also, the effects of several candidate materials for reflector are analyzed in terms of core neutronics because the small core size leads to high sensitivity of reflector material on the cycle length. The final cores having 10 w/o SS303 and 90 w/o graphite reflector are shown to have high TRU burning rates of 33%–35% in FCM pins and significant net burning rates of 24%–25% in the total core with negative reactivity coefficients, low power peaking factors, and sufficient shutdown margins of control rods.     

Reactor physics analysis for the design of nuclear fuel lattices with burnable poisons

The main goals in nuclear fuel lattice design are: (1) minimizing the rod power peaking factor (PPF) in order that the power level distribution is the most uniform; (2) obtaining a prescribed target value for the multiplication factor (k) at the end of the irradiation in order that the fuel lattice reaches the desired reactivity; and (3) obtaining a prescribed target value for the k at the beginning of the irradiation in order that the reactivity excess is neither a high value (to ease the maneuvering of the control systems) nor a low value (to avoid the penalization of the high cost of the burnable poison content). In this work a simple algorithm to design the burnable poison bearing nuclear fuel lattice is presented. This algorithm is based on a reactor physics analysis. The algorithm is focused on finding the radial distribution of the fuel rods having different fissile and burnable poison contents in order to obtain: (1) an adequate minimum PPF; (2) a prescribed target value of the k at the end of the irradiation; and (3) a prescribed target value of the k at the beginning of the irradiation. This algorithm is based on the factorization of the fissile and burnable poison contents of each fuel rod and on the application of the first-order perturbation theory. The performance of the algorithm is demonstrated with the design of a fuel lattice composed of uranium dioxide (UO₂) and gadolinium dioxide (Gd₂O₃) for boiling water reactors (BWR). This algorithm has been accomplished using HELIOS calculation codes. The results show that this simple algorithm is very efficient and precise.     

Pu recycling in a full Th-MOX PWR core. Part I: Steady state analysis

Current practice of Pu recycling in existing Light Water Reactors (LWRs) in the form of U-Pu mixed oxide fuel (MOX) is not efficient due to continuous Pu production from U-238. The use of Th-Pu mixed oxide (TOX) fuel will considerably improve Pu consumption rates because virtually no new Pu is generated from thorium. In this study, the feasibility of Pu recycling in a typical pressurized water reactor (PWR) fully loaded with TOX fuel is investigated.Detailed 3-dimensional 100% TOX and 100% MOX PWR core designs are developed. The full MOX core is considered for comparison purposes. The design stages included determination of Pu loading required to achieve 18-month fuel cycle assuming three-batch fuel management scheme, selection of poison materials, development of the core loading pattern, optimization of burnable poison loadings, evaluation of critical boron concentration requirements, estimation of reactivity coefficients, core kinetic parameters, and shutdown margin.The performance of the MOX and TOX cores under steady-state condition and during selected reactivity initiated accidents (RIAs) is compared with that of the actual uranium oxide (UOX) PWR core.Part I of this paper describes the full TOX and MOX PWR core designs and reports the results of steady state analysis. The TOX core requires a slightly higher initial Pu loading than the MOX core to achieve the target fuel cycle length. However, the TOX core exhibits superior Pu incineration capabilities.The significantly degraded worth of control materials in Pu cores is partially addressed by the use of enriched soluble boron and B₄C as a control rod absorbing material. Wet annular burnable absorber (WABA) rods are used to flatten radial power distribution. The temperature reactivity coefficients of the TOX core were found to be always negative. The TOX core has a slightly reduced, as compared to UOX core, but still sufficient shutdown margin.In the TOX core β_eff is smaller by about a factor of two in comparison to the UOX core and even lower than that of the MOX core. The combination of small β_eff and reduced control materials worth may potentially deteriorate the performance under RIA conditions and requires an additional examination. The behavior of the considered cores during the most limiting RIAs, such as rod ejection, main steam line break, and boron dilution, is further investigated and reported in Part II of the paper.     

10MWt固态燃料熔盐堆控制棒失控抽出事故分析

钍基熔盐堆核能系统项目是中科院先导科技专项之一,其战略性目标是研发第四代熔盐冷却裂变反应堆核能系统。基于10 MWt固态燃料熔盐堆的系统设计,开发了适用于球床式反应堆系统的安全分析软件,并以高温气冷堆为对象对程序计算结果的准确性进行了验证。基于该软件程序,对固态燃料球床堆(Thorium Molten Salt Reactor-Solid Fuel,TMSR-SF)控制棒失控抽出事故进行了分析计算,研究了不同停堆限值及各停堆信号对事故的影响。计算结果表明,超功率停堆限值越高,出口温度限值越大,信号延迟时间越长,反应堆停堆越晚,堆芯功率和燃料最高温度越高。在TMSR-SF控制棒失控抽出事故下,燃料最高温度不超过860°C,远低于1 600°C的熔化温度限值。     

Development of the package-reactor (2) -core characteristics-

A new small reactor concept named the Package-Reactor has been jointly developed by Hitachi, Ltd. and Mitsubishi Heavy Industries, Ltd. The reactor technology was built from that of conventional LWRs. The reactor core consists of 12 cassettes containing fuel rods with a similar design to that of PWR fuel rods. Each cassette has about a 0.4 m outer diameter and they are fixed with about 0.5 m pitch to each other in the atmospheric pressure condition. A tube-type control cluster was developed. It can decrease the rise of reactivity for the one-rod-stuck condition. An advanced cassette design was studied in which the down-comer is placed at the center of the fuel region. This concept, which improves neutron economics and the cold shutdown margin, will increase the marketability of the Package-Reactor. An operation period of more than 8 years can be achieved with UO₂ fuel enrichment of 5.0wt%.     

Transient Xenon Analysis in a Molten Salt Breeder Reactor

An evaluation is made to estimate the transient xenon behavior in an MSBR for several representative patterns of operation. Such analysis is indispensable for detailed evaluation of reactivity balance under transient conditions. The results are compared with those of a typical PWR. The xenon behavior does not differ between the two types of reactor to the extent that might be expected from the fact that in the MSBR, xenon behavior is additionally conditioned by the processes of migration into the circulating bubbles and into the graphite, as well as by diffusion therein.

It is shown that the reactivity transients due to xenon buildup can be held within the range of counteraction by control rod movement for any normal change of reactor output, so long as the reactor is not shut down. After a shutdown, insertion of the control rods will not suffice to override the xenon buildup, but then the fuel processing system could be conveniently utilized to increase the quantity of ²³³U contained in the fuel and regain required reactivity of the core.     

兆瓦级热管反应堆堆芯核热特性研究

基于美国MegaPower兆瓦级热管反应堆设计方案,本文利用蒙特卡罗软件OpenMC与有限元分析软件COMSOL开展堆芯核热特性研究。研究表明：堆芯轴向功率分布呈先升高后降低趋势,且下半段功率水平比上半段高。径向功率随径向距离的增大而降低,在靠近径向反射层处出现反弹升高,且这些区域的功率分布明显受转鼓组件的影响。“大小转鼓”的设计方案不利于兆瓦级热管反应堆的反应性控制。边界区域位置热管失效会造成更高程度的基体/燃料温度上升。3根热管失效工况下的燃料棒温升是2根热管失效的32倍。即使3根热管失效的极端事故工况下,堆芯基体及燃料棒峰值温度仍在安全限值内,表明兆瓦级热管反应堆这种固态导热堆芯的优越安全性。     

兆瓦级空间气冷堆系统启停堆瞬态分析

本文针对兆瓦级高温气冷堆布雷顿循环系统,采用Fortran语言开发系统分析程序TASS,包括堆芯、透平-发电机-压气机、回热器、冷却器和热管式辐射散热器等模型。通过设计值与程序计算值对比对TASS进行验证,并利用TASS对系统启动、停堆瞬态工况进行数值模拟。结果显示,通过分两阶段、阶梯式引入正反应性和提高涡轮机械的转轴速度,堆芯流量和功率匹配良好,系统可在3.5 h内完成启动过程,达到反应堆功率3 406 kW、流量14.2 kg/s的稳态运行。系统停堆过程中,反应堆可依靠自身的非能动余热排出能力,确保芯块和包壳温度与熔点间存在较大安全裕量,实现安全停堆。