UNSTABLE PRODUCTS FROM THE OZONATION OF C60 IN SOLVENTS

The ozonation of a solution of C₆₀ in toluene results in the formation of several unstable compounds C₆₀X and C₆₀Y[1–5] which decay completely at room temperature within about 1 h. The products are oxides C₆₀O[6,6], C₆₀O₂[I], C₆₀O₂[II], and possibly an isomer of C₆₀O₃. The transformations are not due to oxidation by atmospheric oxygen but are spontaneous. The ozonation of a solution of C₆₀O[6,6] in toluene results in the formation of two unstable compounds C₆₀Z[1–2] which also decay completely to C₆₀O₂[I] and C₆₀O₂[II]. It is suggested that all unstable “parents” are ozonides.     

Pyrolytic Trifluoromethylation of [76]-, [78]-, [84]-, and Aza[60]Fullerenes with Silver Trifluoroacetate; Evidence for Coordination of Fullerenes to Silver

Pyrolytic trifluoromethylation of [76], [78], [84], and aza[60]fullerenes with silver trifluoroacetate at 300°C results in extensive polyaddition of up to 18, 18, 20 and 20 CF₃ groups, respectively. In contrast to trifluoromethylation of [60]- and [70]fullerenes that give a full range of derivatives ranging upwards from C_n(CF₃)₂, [76]-, [78]-, and [84]-fullerenes only give C_n(CF₃)_6-18 derivatives, largely in the 10-12 CF₃ range; reaction with [76]fullerene is accompanied by formation of C₆₀(CF₃)₆ attributed to cage fragmentation. For aza[60]fullerene the hexa-addition level dominates, in contrast to its other reactions which give predominantly penta-addition products. All the compounds showed peaks at 1256±2 and 1180-1190 cm^-1, due to the CF₃ group, and peaks in this region are shown also by the soluble extract obtained on trifluoromethylation of nanotubes. As in trifluoromethylation of [60]- and [70]-fullerenes, the products obtained initially are involatile, attributed to formation os silver complexes; these are decomposed on subsequent solution in toluene. Mixed isomeric trifluoromethylated C₆₀F₈ derivatives viz. C₆₀F₇CF₃, C₆₀F₆(FG₃)₂, C₆₀F₅(CF₃)₃ and C₆₀F₄(CF₃)₄, and C₆₀F₄CF₃CF₂CF₃ (a C₆₀F₆ derivative) have been isolated from fluorination of [60]fullerene with MnF₃/K₂NilF₆ at 510°C.     

Preparation and characterization of C60S16 and C70S48 thin films

In this study, we have investigated different methods for preparation of thin films of C₆₀ and C₇₀-sulfur compounds. Films of good quality were obtained by reaction of amorphous C₆₀ and C₇₀ films with a saturated sulfur solution in toluene at 40°C or with saturated sulfur vapour at a temperature of 140°C for several hours. The quality of the fullerene-sulfur films were strongly dependent on the microstructure of the initially deposited fullerene film and the synthesis temperature. X-ray diffraction analyses showed that both methods lead to the formation of films consisting of C₆₀S₁₆ and C₇₀S₄₈ (space groups C 2/c and Amm2, respectively). C₆₀S₁₆ films synthesised on Al₂O₃(012) and Si(100) substrates were texture-free while C₇₀S₄₈ films typically exhibited a preferential (100) orientation. The films were also characterised by Raman and IR- spectroscopy, which confirmed that the interactions between the fullerene molecules and the S₈ rings are weak. The fullerene-sulfur compounds were found to be unstable at high vacuum conditions. Both materials C₆₀S₁₆ and C₇₀S₄₈ are non-conductive at room temperature with conductivities less then 10⁻⁵ (Ω/cm).     

Synthesis and Spectral Characterization of Difunctional Fullerenes

The oxidation of C₆₀ with m-chloroperbenzoic acid gave C₆₀O₂ with a high positional selectivity, as the ¹³C NMR analysis suggested. Diadducts C₆₀CCI₂O, C₆₀CCl₂(anthracene), C₆₀CCl₂[(CH₂CH₂)₂N₂], and C₆₀CCI₂[Pt-(PPh₃)₂] were synthesized, isolated, and characterized by negative ion FAB mass spectroscopy.     

Arylation of [60]Fullerene with Br2/FeCl3/PhH: Formation of C58 Derivatives via CO Loss

Heating a mixture of [60]fullerene, bromine, ferric chloride and benzene under reflux for 24 h products a range of phenylated [60]fullerene derivatives. The main product is C₆₀Ph₅H but other components identified by mass spectrometry (and in some cases separated by HPLC) are: C_6oPh_n(n = 4, 6, 8, 10, 12), C₆₀Ph_nO₂(n = 4, 6, 8, 10, 12), C₆₀Ph_nOH (n = 7, 9, 11), C₆₀Ph_nH₂ (n = 4, 10), C₆₀Ph₄H₄, C₆₀Ph₅H₃, C₆₀Ph_n0₂H (n = 5, 9), C₆₀Ph₄C₆H₄O₂, C₆₀Ph₉OH₃, and C₆₀Ph₁₁ O₃H₂. In the corresponding reaction with toluene, the crude reaction mixture contained C₆₀(MeC₆H₄)₄ as a main product; C₆₀(ClC₆H₄)₅H was obtained from the reaction with chlorobenzene. Formation of these derivatives is believed to involve radical bromination of the fullerene, followed by electrophilic substitution of the hatogenofullerene into the aromatic, accompanied in some case by hydrolysis, elimination and epoxide formation; oxidation may also introduce ketone/dioxetane functionality. The EI mass spectra of C₆₀Ph₄O₂ and C₆₀Ph₈O₂show degradation to C₅₈Ph_n (n = 0-8), having structures believed to be related to the pseudofollerenes C₆₈Ph_n (n = 0-8) reported recently. These results suggest that some derivatisations of fullerenes confer stability, due to the relief of strain.     

THE ELUSIVE C60S: THREE ATTEMPTED SYNTHESES

Results of semiempirical energy calculations suggested that a [6,6]-closed C₆₀S fullerene sulfide might be stable. Attempts were therefore undertaken to synthesize the compound by UV photolysis of C₆₀ in CS₂ and by the heating of mixtures of C₆₀ and S₈ to 325 and 400°C. Any sulfide, if formed, was present in undetectably small quantities. However, [¹²C₆₀³⁴S]^- ions were observed when a mixture of solid C₆₀ and elemental sulfur was analyzed by Laser Desorption Ionization Time-of-Flight mass spectrometry.     

GROUP TRANSFER AND DIMERIZATION PROCESSES OF C60(CN)2 UNDER ATMOSPHERIC PRESSURE IONIZATION CONDITIONS

Neutral and anionic C₆₀(CN)₂ were investigated with electrospray ionization (ESI) and atmospheric pressure chemical ionization (APCI) mass spectrometry. It was observed that its anions underwent cyano- group and oxygen transfer, and dimerization processes in ESI conditions to form C₆₀(CN)₃H^-, C₆₀(CN)₂(OH₂)^-, [C₆₀(CN)₃H]^-₂, [C₆₀(CN)₂(OH₂)]^-₂ and [(C₆₀)₂(CN)₂(OH)]^-. Meanwhile, neutral C₆₀(CN)₂, for which no signal was observed in ESIMS, showed a base peak corresponding to C₆₀(CN)₂Cl^- in APCIMS spectra with CHCl₃ used as solvent, while only a molecular ion peak corresponding to C₆₀(CN)^-₂ was observed for the toluene solution of neutral C₆₀(CN)₂ in the same conditions. Possible mechanisms for group transfer and dimerization were proposed based on these observations.     

Ni2O3对C3S形成过程的影响及其固溶效应

C3S是水泥熟料中最重要的矿物,杂质离子固溶进入C3S晶格并促进其单斜型或三方型稳定存在,研究离子在C3S中的固溶作用机理,能更深入了解阿利特的微结构及性质。利用化学分析、XRD、DTA及相图分析,研究Ni2O3对C3S形成过程的影响及其固化效应。结果表明:Ni2O3主要以+2价的形式在CaO-Si O2二元体系中存在,因其优先与Si O2反应形成固溶体,f-CaO随Ni2O3掺量递增而增大;当Ni2O3掺量大于其CaO-Si O2二元体系固溶极限时,f-CaO变化趋势呈相反趋势,且促进C3S形成效应明显。通过最小二乘法及Ni2O3固溶度的精确界定,可推导出Ni2O3在C3S中的固溶反应分子式为:(Ca3-0.53xNi0.53x)(Si1-0.47xNi0.47x)O5(x=0.0442)。     

Design and Computation of Fullerene C60with a Corona for Polymer Synthesis

“Saturnized fullerene C₆₀ molecules” were designed as the cardinal points for cross-linked polymers. Results from the graphic molecular modeling, including the CVFF calculations, indicate that the 1, 2-adduct [-N(CH₂)6-]6·C_6oH₆with S₆ symmetry is the best target molecule.     

Effect of Repeated Application of C60 Combined with UVA Radiation Onto Hairless Mouse Back Skin

Repeated application of buckminsterfullerene (C₆₀) toluene solution combined with ultraviolet A (UVA) radiation onto hairless mouse back skin resulted in enhancing formation of erythema as an acute disease but induced no carcinoma on the skin. This result is probably due to insolubility of C₆₀ in the living cells to generate little singlet oxygen ¹O₂ by UVA radiation.     

Modifications of Fullerenes Extractions and Chromatographies with Different Solvents

In the Bucky System II, based on electrical arc method, carbon soot was produced. Fullerenes C₆₀ and C₇₀ were Soxhlet extracted from the collected soot samples with toluene, chlorobenzene and with both of them successively, modifying the original methods. The yields of the both obtained toluene extracts were 5.4%. Chlorobenzene extract yield was 5.8%. After extraction of toluene insoluble soot with chlorobenzene, the entire extract yield was increased from 5.4% to 5.8%, due to modification of the existing methods. The difference of fullerenes solubilities in these solvents has been concluded. In the second part of our work toluene and chlorobenzene fullerenes extracts were separated by column chromatographies on active Al₂O₃, modifying the existing methods, by elution with hexane and mixtures of benzene, toluene, or xylene with hexane in determined ratios and orders. Identifications of buckminsterfullerene C₆₀ in the first chromatographically purified fractions were achieved by electron impact ionization (EI) mass, IR, and UV/VIS spectroscopy. The second and the third purified fullerene fractions, toluene and chlorobenzene soot extracts were characterized by IR and UV/VIS methods.     

Synthesis of Calix[4, 5, 6] Resorcinarenes Using Fullerene C60 as Template

We present a new use of fullerene C₆₀ as a template for the synthesis of cyclic resorcinarenes, The cyclocondensation of 2-methyl-resorcinol with benzaldehyde and hexanal in THF, catalyzed by AlCl₃, in the presence of 1%, 5%, and 10% fullerene C₆₀, produces calix[4], [5], and [6] resorcinarenes, with the pentamer and hexamer as the major products. The resorcinarenes were characterized by ¹H, ¹³C NMR, FTIR, FAB⁺ mass spectrometry, and elemental analysis.     

Loss of Chlorine from C60 and C70 Chlorides

Fullerene contents of chlorinated C₆₀ and C₇₀ were determined with HPLC. n-Values of C₆₀Cl_n and C₇₀Cl_n were determined from mass increase during synthesis, MALDI-TOF mass spectrometry, PIXE, Nuclear Microprobe (¹²C[d,p]¹³C), and Electron Microprobe analysis. n-Values obtained immediately after synthesis were in the range 31-45. Best values obtained later were in the range 10-20. It is suggested that (i) the samples lost CS₂ or CS₂/CCl₄, or Cl of “crystallization” after synthesis, (ii) after synthesis the samples lost Cl bound to C₆₀ (iii) Cl was lost during the analysis, or (iv) some of all three.     

CO-DEPOSITION OF FULLERENES AND SULFUR FROM DILUTED SOLUTION

A new method to synthesize fullerene and sulfur compounds has been developed. Using this method, C₆₀S₁₆ and C₇₀S₁₆ compounds were grown from dilute fullerene and sulfur toluene solution. Their atomic structures were analyzed by x-ray diffraction with the single crystal. The C₆₀S₁₆ crystal is C-centered monoclinic structure of a=2.0874 nm, b=2.1139 nm, c=1.05690 nm and β=111.93°, and the C₇₀S₁₆ has a primitive monoclinic, P2₁/c, with lattice parameters of a=1.5271 nm, b=1.49971 nm, c=2.18024 nm and β=109.791°. In this compound, the structure of fullerenes is maintained and sulfur atoms form S₈ rings placed around the fullerenes.     

HPLC Diode-Array Analysis of C60 and C70 Polymeric Fullerene Oxides (Fullerene Polymeric Ozonides)

It is shown by HPLC diode-array analysis that the C₆₀ and C₇₀ polymeric fullerene oxides ([C₆₀]-PFOs and [C₇₀]-PFOs) which are polymeric ozonides, are composed by nine different components. The ozonide derivatives of C₆₀ and C₇₀ have been proved to be practically analogous in chemical structure and composition. The most important component of both [C₆₀]-PFOs and [C₇₀]-PFOs accounts for about 3/4 of each sample. The overozonation of [C₆₀]-PFOs in methanol has been studied and shown to not produce any significant changes.     

C1 C60F16O: A Fluorofullerene Ether Having Exceptionally Long Chromatographic Retention

From the product of fluorination of [60]fullerene with K₂PtF₆ at 470 °C, we have isolated a small quantity (ca. 0.5 mg) of C₆₀F₁₆O, an oxahomofluorofullerene (ether) of exceptionally long HPLC retention time (50% greater than any other known fluorofullerene). The ¹⁹F NMR spectrum consists of 16 main lines and 8 minor ones, due to C₆₀F₁₆O (a single isomer of C₁ symmetry) and C₆₀F₁₆, respectively. The presence of the latter (absent on initial isolation) indicates this ether to be relatively unstable, confirmed by the failure to obtain an EI mass spectrum. The empirical formula was therefore determined by MALDI-TOF mass spectrometry in the negative-ion mode, the laser fluence being carefully adjusted at the threshold of ion formation, whence the only observable signal corresponded to the molecular ion of C₆₀F₁₆O. At slightly higher laser fluence, the base peak of C₆₀F₁₆O^·- is accompanied by C₆₀F₁₆^·- and C₆₀F₁₅O^·-. Two closely similar structures (of similar calculated stabilities) are fully consistent with the NMR data. Calculated dipole moments and the exceptionally long retention HPLC retention times suggest that both C₆₀F₁₆ and C₆₀F₁₆O may be dimers.     

Thermally Activated Decay Processes of Isolated Superhot C60 in Molecular Beams

We have studied thermally activated decay processes of an ensemble of isolated superhot C₆₀ molecules in molecular beams by several different methods. Highly vibrationally excited C₆₀ molecules in effusive or supersonic beams (with average vibrational energy of 10-20 eV) were generated in an all ceramic, two-stage high temperature nozzle source. the decay kinetics due to various decay processes of the initially canonical ensemble was followed by a mass spectrometric methods for a large range of initial temperatures (T_o=1100 - 1950 K). the processes studied are: (1) fragmentation (C₂ emission) of the neutral C₆₀ (2) C₂ emission from the C⁺₆₀ ions (3) black-body like radiative cooling, and (4) delayed electron emission. the experiments described here are: (a) Depletion of the integrated C₆₀ flux. (b) Analysis of C₆₀ time-of-flight distributions. (c) Dependence of electron impact induced ionization/ fragmentation of C₆₀ upon its initial thermal excitation, and (d) Thermal energy dependence of delayed electron emission. It is shown that thermal kinetics models using a single set of independently measured parameters uniquely reproduce all the experimental observations. the models take into account the different cooling processes and their time evolution. We analyze in detail the evolution of the initially canonical vibrational energy distribution during the flight time to the detector as it is gradually being distorted due to evaporative and radiative cooling mechanisms. It is concluded that the correct parameters to be used for describing the thermally activated decay kinetics of superhot C₆₀ are activation energy of E_o = 4.3 - 4.8 eV for the neutral fragmentation channel C₆₀ → C₅₈ + C₂ and E₁=4.0 - 4.3 for the ion fragmentation channel C⁺₆₀→ C⁺₅₈ + C₂, and corresponding pre-exponential factors of A_o = A₁ = 2.5 × 10¹³ sec^-1. the emissivity coefficient for black body like radiation was found to be ε = 4.5 × 10^-5.     

Regiochemistry of Azide Additions to [70]Fullerene

In this paper we report for the first time on the reaction of C₇₀ with alkyl azides and show that the [3+2]-cycloaddition occurs preferably at bond 7 followed by bond 5 to give two regioisomeric A/B-triazolines and one C/C-triazoline Thermal extrusion of N₂ from these triazolines leads to open [5,6]-bridged iminofullerenes as A/A- and B/C-isomers as well as to the ring closed [6,6]-bridged analogues as A/B- and C/C-isomers. These results are in line with the corresponding thermal reaction of C₇₀ with diazomethane.     

Modifying the buckyball

Structural and electronic properties of carbon clusters, in particular the C₆₀ “buckyball” molecule as well as structurally and chemically modified fullerenes, are calculated using a combination of predictive ab initio techniques and parametrized total energy schemes. These calculations indicate that single- and multi-shell fullerenes are the most stable C_n isomers at T = 0 for n < 20. More open structures are favored by entropy at higher temperatures. Upon interaction with donor elements, C₆₀ molecules form stable M@C₆₀ endohedral complexes; analogous acceptor-based complexes are unstable. Solid C₆₀ reacts with alkali metals and forms a stable intercalation compound which shows superconducting behavior. The relatively high value of the critical temperature for superconductivity can be explained quantitatively within the Bardeen-Cooper-Schrieffer formalism.     

Thermolysis and Photolysis of C60 Diozonides

Ozonation of C₆₀ in o-xylene produced three C₆₀(O₃)₂ diozonides that were separated from one another and from two C₆₀(O₃)₃ triozonides by High Performance Liquid Chromatography (HPLC). Upon thermolysis at 10, 15, and 16.6°C, each of the diozonides dissociated sequentially, first to a C₆₀O(O₃) oxyozonide, then to a C₆₀O₂ diepoxide. The three diepoxides were stable in solution for at least 3 weeks. The mean lifetimes of the three diozonides were 52 ± 5, 62 ± 6, and 17.3 ± 1.8 min, respectively (all at 15°C). The mean lifetimes of the three oxyozonides were 69.7 ± 0.7 and 58 ± 6 min at 16.6°C, respectively and about 240 min at 10°C. Photolysis of the diozonides yielded two dioxidoannulenes with UV-Vis adsorption maxima at 333 and 332 nm, and what appeared to be an epoxide-oxidoannulene with UV-Vis adsorption maximum at 327 nm. These annulenes were observed to form dimers. We have synthesized and characterized six C₆₀O₂ dioxides, at least three and possibly four of which were hitherto unknown. We report the discovery of oxyozonides that form during the dissociation of diozonides.