Methane thermocatalytic decomposition to COx-free hydrogen and carbon nanomaterials over Ni–Mn–Ru/Al2O3 catalysts

Thermocatalytic decomposition of methane is proposed to be an economical and green method to produce CO_x-free hydrogen and carbon nanomaterials. In this work, the catalytic performance of Ni–Mn–Ru/Al₂O₃ catalyst under different reaction parameters (such as, pre-reduction temperature, reaction temperature, space velocity, etc.) were investigated to obtain optimum reaction conditions. The catalysts were characterized by N₂ adsorption/desorption, X-ray diffraction, inductively coupled plasma optical emission spectrometer and hydrogen temperature programmed reduction. For the 60 wt% Ni-5 wt% Mn-10 wt% Ru/Al₂O₃ catalyst using Ru(NO)(NO₃)_x(OH)_y(x + y = 3) as Ru precursor, the methane conversion rate obtained is high as 93.76% under optimum reaction conditions (reduction at 700 °C for 1 h, reaction at 750 °C, GSHV = 36,000 mL/g_cat h). Carbon nanomaterials formed during the process of methane thermocatalytic decomposition were characterized by scanning electron microscopy, thermal gravimetric analyzer and Raman spectroscopy. Carbon nanofibers were formed over all the Ni–Mn–Ru/Al₂O₃ catalysts.     

The dispersed SiO2 microspheres supported Ru catalyst with enhanced activity for ammonia decomposition

Ru nanoparticles supported on SiO₂ microspheres (Ru/SiO₂-GUS) were prepared by the glucose-urea-metallic salt method and applied in the decomposition of ammonia. In the glucose-urea-metallic salt method, glucose as the carbon template plays a significant role in the formation of diffusion-beneficial structural properties of Ru/SiO₂-GUS, and also induceds the modification of the electronic state of Ru. Ru/SiO₂-GUS exhibited higher catalytic activity compared with the catalyst prepared with the impregnation method. The catalytic performance of Ru/SiO₂-GUS was further enhanced with the addition of either K or Cs——the addition order and amount strongly affecting the catalytic performance. When the ratio of K/Cs to Ru is 2, the alkali metal (KOH/CsOH) solution is added in the homogeneous solution of glucose, urea, RuCl₃ and the colloidal silica, the promotion effect of K/Cs is the strongest, particularly under lower reaction temperatures. However, the promotion effects of K and Cs are different as reveled by the combined results of H₂-TPR, XPS and NH₃-TPSR. More NH₃ can be absorbed on K–Ru/SiO₂-GUS and the electron density of Ru decreased. By contrast, more metallic Ru formed on Cs–Ru/SiO₂-GUS, facilitating N₂ recombination.     

Hydrogen production via catalytic pulsed plasma conversion of methane: Effect of Ni–K2O/Al2O3 loading,applied voltage,and argon flow rate

Despite industrial application of methane as an energy source and raw material for chemical manufacturing, it is a potent heat absorber and a strong greenhouse gas. Evidently reduction of methane emission especially in the natural gas sector is essential. Methane to hydrogen conversion through non-thermal plasma technologies has received increasing attention. In this paper, catalytic methane conversion into hydrogen is experimentally studied via nano-second pulsed DBD plasma reactor. The effect of carrier gas flow, applied voltage, and commercial Ni–K₂O/Al₂O₃ catalyst loading on methane conversion, hydrogen production, hydrogen selectivity, discharge power, and energy efficiency are studied. The results showed that in the plasma alone system, the highest methane conversion and hydrogen production occurs at argon flow rate of 70 mL/min. Increase in the applied voltage increases the methane conversion and hydrogen production while it decreases the energy efficiency. Presence of 1 g Ni–K₂O/Al₂O₃ catalyst shifts the optimum voltage for methane conversion and hydrogen production to 8 kV, reduces the required power, and increases the energy efficiency of the process. Finally in the catalytic plasma mode the optimum process condition occurs at the argon flow rate of 70 mL/min, applied voltage of 8 kV, and catalyst loading of 6 g. Compared with the optimum condition in the absence of catalyst, presence of 6 g Ni–K₂O/Al₂O₃ catalyst increased the methane conversion, hydrogen production, hydrogen selectivity and energy efficiency by 15.7, 22.5, 7.1, and 40% respectively.     

Catalytic ammonia decomposition for hydrogen production on Ni,Ru and NiRu supported on CeO2

Ceria-supported Ni, Ru and NiRu catalysts have been tested in the catalytic decomposition of ammonia to yield hydrogen and their performance in long-term tests has been compared to alumina-supported Ni and Ru samples. The catalysts have been characterized by XRD, TPR, NH₃-TPD, HAADF-STEM, SEM, BET and XPS. Ceria-based samples are more active in ammonia decomposition with respect to their alumina-based counterparts, which has been ascribed to a particular metal-support interaction, while acidity does not seem to play an important role. Ru-based catalysts are more active than Ni-based samples, but they deactivate rapidly, in particular the Ru/Al₂O₃ sample. This is ascribed to loss of exposed Ru, as demonstrated by XPS and HAADF-STEM. Considering the high cost and limited availability of Ru, the Ni/CeO₂ catalyst appears as a promising system for ammonia decomposition due to its good performance and low cost. In situ XPS experiments reveal that the active sites for the catalytic decomposition of ammonia are metallic Ni and Ru. Bimetallic NiRu catalysts do not outperform their monometallic counterparts, irrespective of the order in which the metals are added.     

Improved catalytic stability and anti-coking ability of Ni/La2O3–Al2O3 catalyst by doping alkaline earth metals for n-decane reforming

In this paper, a series of alkaline earth metals oxides doped Ni/La₂O₃–Al₂O₃ catalysts were synthesized by the coprecipitation method combined with two step impregnation methods. n-decane reforming was used to investigate these catalysts, in order to develop an excellent catalyst with better hydrogen selectivity, activity, stability, as well as lower carbon deposition. Deactivation by carbon deposition, the catalyst regenerability and stability tests were also used to weigh the selected catalyst. These catalysts are characterized by N₂ adsorption-desorption, XRD, NH₃-TPD, Raman, and TEM. The introduction of alkaline earth metals modifiers enhances the activity, stability and anti-coking ability, meanwhile the SrO modified Ni/La₂O₃–Al₂O₃ shows the best catalytic activity. Moreover, the hydrogen selectivity and conversion over regenerative Ni/La₂O₃–Al₂O₃/SrO catalysts were quite close to the results of fresh ones. The enhancements of M oxides doped catalysts (especially Sr) can be due to the improved textural properties, basicity, metal-support interaction and anti-coking ability. As a consequence, loading different metals in different ways helps to gradually improve the stability, activity and coking inhibition of catalysts is an effective approach to obtain a multi-function catalyst.     

Direct hydrodeoxygenation of cellulose and xylan to lower alkanes on ruthenium catalysts in subcritical water

Nano particles of Ru, Rh, Pd, Ir, Pt, and Au, protected by polyvinyl pyrrolidone (PVP), were applied to the hydrodeoxygenation of cellulose and xylan in water and 5 MPa H₂ at 543 K. The distributions of products generated from cellulose and xylan were roughly similar to each other under the present reaction conditions, and therefore, the former was intensively studied. The Ru-PVP catalyst afforded mainly methane and lower alkanes, rather than producing water soluble organic compounds, such as diols and alcohols, that were formed with the use of the other catalysts. The changes in the product distributions with reaction temperature and time indicated that the reaction consisted of two consecutive reactions: cellulose or xylan → water soluble compounds → hydrogenolysis. The first transformation was promoted in subcritical water, and the second step was catalyzed by the Ru catalyst. The Ru catalyst that was supported on CeO₂, γ-Al₂O₃, or activated carbon yielded a similar product distribution to that on Ru-PVP; however, the loading of Ru on TiO₂, ZrO₂, SiO₂–Al₂O₃, or SiO₂ resulted in the increment of diols. After the reaction a small portion of the CeO₂ and most of the SiO₂–Al₂O₃ and SiO₂ were dissolved in water, and a portion of the Al₂O₃ was transformed to boehmite AlO(OH) from the γ-alumina. Little change in the catalytic activity however was observed upon the reuse of Ru/Al₂O₃ in the second run.     

Hydrogen production from 2-propanol over Pt/Al2O3 and Ru/Al2O3 catalysts in supercritical water

One of the alternative energy sources to fossil fuels is the use of hydrogen as an energy carrier, which provides zero emission of pollutants and high-energy efficiency when used in fuel cells, hydrogen internal combustion engines (HICE) or hydrogen-blend gaseous fueled internal combustion engines (HBICE). The gasification of organics in supercritical water is a promising method for the direct production of hydrogen at high pressures, with very short reaction times. In this study, hydrogen production from 2-propanol over Pt/Al₂O₃ and Ru/Al₂O₃ catalysts was investigated in supercritical water. To investigate the influences on hydrogen production, the experiments were carried out in the temperature range of 400–550 °C and in the reaction time range of 10–30 s, under a pressure of 25 MPa. In addition, different 2-propanol concentrations and reaction pressures were tested in order to comprehend the effects on the gasification yield and hydrogen production. It was found that Pt/Al₂O₃ catalyst was much more selective and effective for hydrogen production when compared to Ru/Al₂O₃. During the catalytic gasification of a 0.5 M solution of 2-propanol, a hydrogen content up to 96 mol% for a gasification yield of 5 L/L feed was obtained.     

Removing CO and acetaldehyde from hydrogen streams generated by ethanol reforming

It is well known that CO depletion from the hydrogen is compulsory in order to avoid the poisoning of the anode electrocatalyst of the PEM fuel cell. Hydrogen generated by ethanol reforming contains CO and acetaldehyde. The latter can be decomposed on the electrocatalyst generating more CO. The decarbonylation and methanation reactions are proposed by this work in order to eliminate acetaldehyde and CO from the hydrogen stream. Our results show that Ru/Al₂O₃ is more active than Ni/SiO₂ for the methanation reaction. These catalysts also promote the decarbonylation of acetaldehyde generating methane and CO, with Ni/SiO₂ being much more active than the Ru catalyst. The performance of a double-bed reactor in the purification of hydrogen generated by ethanol reforming is described in this contribution. The first layer composed of Ni/SiO₂ decomposes acetaldehyde producing methane and CO, which is then eliminated by the methanation reaction employing Ru/Al₂O₃ in the second layer.     

Development of a Ru catalyst supported on HY zeolite for the oxidative decomposition of NH3 triggered at room temperature

On-site hydrogen production from the oxidative decomposition of NH₃ with a catalyst is highly required in the countryside where external heat is hardly supplied. In this study, Ru-based zeolite catalysts were prepared by impregnation and subsequent washing using RuCl₃·3H₂O and HY zeolite or H-MOR zeolite for the oxidative decomposition of NH₃. The H-MOR-supported Ru catalyst could not be self-heated by feeding 80% NH₃/20% O₂ to the catalyst bed at room temperature. By contrast, the HY-supported Ru catalyst underwent self-heating to approximately 773 K upon feeding the reactants owing to the heat released by NH₃ adsorption and oxidation, leading to excellent performance for the oxidative decomposition of NH₃ during five cycles of start-up tests. Characterization results indicated that the Cl-free Ru/HY catalyst exhibited self-heating due to the presence of small well-dispersed Ru metal particles and a large amount of surface acidic sites.     

Ni/Ru–Mn/Al2O3 catalysts for steam reforming of toluene as model biomass tar

The catalytic steam reforming of the major biomass tar component, toluene, was studied over two commercial Ni-based catalysts and two prepared Ru–Mn-promoted Ni-base catalysts, in the temperatures range 673–1073 K. Generally, the conversion of toluene and the H₂ content in the product gas increased with temperature. A H₂-rich gas was generated by the steam reforming of toluene, and the CO and CO₂ contents in the product gas were reduced by the reverse Boudouard reaction. A naphtha-reforming catalyst (46-5Q) exhibited better performance in the steam reforming of toluene at temperatures over 873 K than a methane-reforming catalyst (Reformax 330). Ni/Ru–Mn/Al₂O₃ catalysts showed high toluene reforming performance at temperatures over 873 K. The results indicate that the observed high stability and coking resistance may be attributed to the promotional effects of Mn on the Ni/Ru–Mn/Al₂O₃ catalyst.     

Simultaneous dehydrogenation of 1,4- butanediol to γ-butyrolactone and hydrogenation of benzaldehyde to benzyl alcohol mediated over competent CeO2–Al2O3 supported Cu as catalyst

Hydrogen being a dynamically impending energy transporter is widely used in hydrogenation reactions for the synthesis of various value added chemicals. It can be obtained from dehydrogenation reactions and the acquired hydrogen molecule can directly be utilized in hydrogenation reactions. This correspondingly avoids external pumping of hydrogen making it an economical process. We have for the first time tried to carryout 1,4-butanediol dehydrogenation and benzaldehyde hydrogenation simultaneously over ceria-alumina supported copper (Cu/CeO₂–Al₂O₃) catalyst. In this concern, 10 wt% of Cu supported on CeO₂–Al₂O₃ (3:1 ratio) was synthesized using wet impregnation method. The synthesized catalyst was then characterized by various analytical methods such as BET, powder XRD, FE-SEM, H₂-TPR, NH₃ and CO₂-TPD, FT-IR and TGA. The catalytic activity towards simultaneous 1,4-butanediol dehydrogenation and benzaldehyde hydrogenation along with their individual reactions was tested for temperature range of 240 °C–300 °C. The physicochemical properties enhanced the catalytic activity as clearly interpreted from the results obtained from the respective characterization data. The best results were obtained with 10 wt% of Cu supported on CeO₂–Al₂O₃ (3:1 ratio) catalyst with benzaldehyde conversion of 34% and 84% selectivity of benzyl alcohol. The conversion of 1,4-butanediol was seen to be 90% with around 95% selectivity of γ-butyrolactone. The catalyst also featured physicochemical properties namely increased surface area, higher dispersion and its highly basic nature, for the simultaneous reaction towards a positive direction. In terms of permanence, the Cu/CeO₂–Al₂O₃ (10CCA) catalyst was quite steady and showed stable activity up to 24 h in time on stream profile.     

Ammonia decomposition over SiO2-supported Ni–Co bimetallic catalyst for COx-free hydrogen generation

NH₃ decomposition over non-noble catalyst to generate CO_x-free H₂ has attracted great attention in recent years. In this work, fumed SiO₂-supported Ni, Co and Ni–Co bimetallic catalysts are synthesized by using a co-impregnation method and evaluated for NH₃ decomposition, which shows that the bimetallic catalysts exhibit better catalytic activity than the monometallic ones. This enhanced activity observed on bimetallic catalyst can be largely attributed to the more appropriate catalyst metal-N binding energy resulting from the synergistic effect between Ni and Co in the formed Ni–Co alloy. Among the synthesized catalysts, Ni₅Co₅/SiO₂ synthesized with the Ni/Co molar ratio of 5:5 achieves 76.8% NH₃ conversion under a GHSV of 30,000 mL h⁻¹ g⁻¹_cat at 550 °C and shows the best catalytic activity, which can be further improved by doping with K (78.1% NH₃ conversion at 30,000 mL h⁻¹ g⁻¹_cat), and the obtained Ni₅Co₅/SiO₂–K also shows excellent catalytic stability.     

Room temperature hydrogen generation from aqueous ammonia-borane using noble metal nano-clusters as highly active catalysts

Nano-clusters of noble metals Ru, Rh, Pd, Pt and Au have been supported on γ-Al₂O₃, C and SiO₂, of which the catalytic activities have been investigated for hydrolysis of NH₃BH₃. Among these catalysts, the Ru, Rh and Pt catalysts exhibit high activities to generate stoichiometric amount of hydrogen with fast kinetics, whereas the Pd and Au catalysts are less active. Support effect has been studied by testing the hydrogen generation reaction in the presence of Pt supported on γ-Al₂O₃, VULCAN^® carbon and SiO₂, and it is found that Pt on γ-Al₂O₃, which has the smallest particle size, is the most active. Concentration dependence of the hydrogen generation from aqueous NH₃BH₃ solutions has been investigated in the presence of Pt/γ-Al₂O₃ by keeping the amount of Pt/γ-Al₂O₃ catalyst unchanged, which exhibits that the hydrogen release versus time (ml H₂ min⁻¹) does not significantly change with increasing the NH₃BH₃ concentration, indicating that the hydrogen release rate is not dependent on the NH₃BH₃ concentration and the high activity of the Pt catalyst can be kept at high NH₃BH₃ concentrations. Activation energies have been measured to be 23, 21 and 21 kJ mol⁻¹ for Ru/γ-Al₂O₃, Rh/γ-Al₂O₃ and Pt/γ-Al₂O₃ catalysts, respectively, which may correspond to the step of B–N bond breaking on the metal surfaces. The particle sizes, surface morphology and surface areas of the catalysts have been obtained by TEM and BET experiments.     

Influence of promoting Ni-based catalysts with ruthenium in the dry reforming of polypropylene plastics for syngas production

The catalytic dry reforming of plastic waste is conducted in two-stage fixed bed reactors. The pyrolysis of polypropylene plastics occurs in the first reactor, and the pyrolyzed gases undergo a reforming reaction with carbon dioxide over a catalyst in the second reactor. The wet impregnation method is used to synthesize Ru–Ni/Al₂O₃ catalysts, which are then calcined and reduced at 800 °C. The results show that as the nickel loading increases, the syngas production increases. Promoting the catalyst with a small quantity of ruthenium significantly improves the plastic conversion into syngas. The dry reforming of polypropylene over 1Ru15Ni/Al₂O₃ catalyst resulted in the maximum syngas yield (159 mmol_syngas/g_PP) at a 2:1 plastic to catalyst ratio. The catalytic dry reforming of plastics is promising for the production of synthesis gas.     

Numerical modeling of hydrogen production from ammonia decomposition for fuel cell applications

The hydrogen production from NH₃ decomposition for fuel cell applications using packed Ni–Pt/Al₂O₃ particles as the catalyst is theoretically and numerically predicted. The results show that by adopting the chemical reaction model for a packed-bed reactor used in the methanol-steam reforming with ZnO/Al₂O₃ as the catalyst, the numerical model predicted satisfactory results on the NH₃ decomposition efficiency as compared with the experimental data. For various catalyst bed porosities and particle sizes, the numerical results indicated that porosity and permeability of the catalyst bed produce an insignificant effect on the NH₃ decomposition. Based on this finding, a one-dimensional plug flow model is developed and the predicted species molar fraction variations and NH₃ decomposition efficiency are found in good agreement with the numerical simulations. From the numerical and theoretical results, it is found that the NH₃ volumetric flow rate fed into the reactor is an important factor that determines the reaction temperature and decomposition efficiency in addition to the catalyst. Because of a longer NH₃ residence time inside the reactor, lower reaction temperature can be employed for a high decomposition efficiency when the NH₃ flow rate is low.     

Enhanced low temperature catalytic activity of Ni/Al–Ce0.8Zr0.2O2 for hydrogen production from ammonia decomposition

Ammonia decomposition is an effective way for high purity hydrogen production, yet the increase of catalytic activity at low temperatures remains a big challenge for this process. In this paper, a CeO₂–ZrO₂ composite with Al as the secondary dopant was synthesized by the co-precipitation method, which was used as the carrier of nickel metal for ammonia decomposition. The experimental results showed that an obvious increase in catalytic activity of the ammonia decomposition at the relatively low temperature range of 450–550 °C was achieved over the nickel catalyst with CeO₂–ZrO₂ composite as the metal carrier. Specifically, the complete decomposition of ammonia was achieved at 580 °C for Ni/Al–Ce_0.8Zr_0.2O₂ catalyst, while only 92% of ammonia was decomposed at 600 °C over the reference Ni/Al₂O₃ catalyst. The characterization results indicated that the introduction of Al as the secondary dopant of ceria not only increases the specific surface area and oxygen defects on the surface, but also enhances the nickel metal dispersion and metal-support interaction, thus enhances the catalytic performance of Ni/Al–Ce_0.8Zr_0.2O₂ catalyst in the ammonia decomposition.     

Life cycle net energy and global warming impact assessment for hydrogen production via decomposition of ammonia recovered from source-separated human urine

Decomposition of ammonia derived from source-separated human urine is a renewable approach for hydrogen production. Life cycle net energy analysis and global warming impact of scaled-up hydrogen production via this technique are studied in this paper. Ammonia decomposition processes, including fixed-bed reactors with Ru/Al₂O₃ and Ni/Al₂O₃ as catalyst options are simulated using the Aspen Plus software, and the results are compared with published data for validation. The life cycle net energy indicators are assessed for three scenarios of ammonia generation: conventional air stripping, microbial fuel cell, and electrochemical cell methods at a unit basis of 1000 kg of H₂ production. Results show that the microbial fuel cell process is more energy-efficient and emits lower greenhouse gases. The net energy ratio of the microbial fuel cell method is 1.38, and 1.12, for Ru/Al₂O₃ and Ni/Al₂O₃, respectively. A comparative assessment of ammonia generation and decomposition options for environmentally-benign hydrogen production is discussed.     

Oxidative catalytic steam gasification of sugarcane bagasse for hydrogen rich syngas production

Reactive Flash Volatilization (RFV) is an emerging thermochemical method to produce tar free hydrogen rich syngas from waste biomass at relatively lower temperature (<900 °C) in a single stage catalytic reactor within a millisecond residence time. Here, we show catalytic RFV of bagasse using Ru, Rh, Pd, or Re promoted Ni/Al₂O₃ catalysts under steam rich and oxygen deficient environment. The optimum reaction conditions were found to be 800 °C, steam to carbon ratio = 1.7 and carbon to oxygen ratio = 0.6. Rh–Ni/Al₂O₃ performed the best, resulting in highest hydrogen concentration in the synthesis gas at 54.8%, with a corresponding yield of 106.4 g-H₂/kg bagasse. A carbon conversion efficiency of 99.96% was achieved using Rh–Ni, followed by Ru–Ni, Pd–Ni, Re–Ni and mono metallic Ni catalyst in that order. Alkali and Alkaline Earth Metal species present in the bagasse ash and char, that deposited on the catalyst, was found to enhance its activity and stability. The hydrogen yield from bagasse was higher than previously reported woody biomass and comparable to the microalgae.     

Structure-dependent activity and stability of Al2O3 supported Rh catalysts for the steam reforming of n-dodecane

Steam reforming of liquid hydrocarbon fuels is an appealing way for the production of hydrogen. In this work, the Rh/Al₂O₃ catalysts with nanorod (NR), nanofiber (NF) and sponge-shaped (SP) alumina supports were successfully designed for the steam reforming of n-dodecane as a surrogate compound for diesel/jet fuels. The catalysts before and after reaction were well characterized by using ICP, XRD, N₂ adsorption, TEM, HAADF-STEM, H₂-TPR, CO chemisorption, NH₃-TPD, CO₂-TPD, XPS, Al²⁷ NMR and TG. The results confirmed that the dispersion and surface structure of Rh species is quite dependent on the enclosed various morphologies. Rh/Al₂O₃-NR possesses highly dispersed, uniform and accessible Rh particles with the highest percentage of surface electron deficient Rh⁰ active species, which due to the unique properties of Al₂O₃ nanorod including high crystallinity, relatively large alumina particle size, thermal stability, and large pore volume and size. As a consequent, Rh/Al₂O₃-NR catalyst exhibited superior catalytic activity towards steam reforming reactions and hydrogen production rate over other two catalysts. Especially, Rh/Al₂O₃-NR catalyst showed the highest hydrogen production rate of 87,600 mmol g_fuel^?1 g_Rh^?1min^?1 among any Rh-based catalysts and other noble metal-based catalysts to date. After long-term reaction, a significant deactivation occurred on Rh/Al₂O₃–NF and Rh/Al₂O₃-SP catalysts, due to aggregation and sintering of Rh metal particles, coke deposition and poor hydrothermal stability of nanofibrous structure. In contrast, the Rh/Al₂O₃-NR catalyst shows excellent reforming stability with negligible coke formation. No significantly sintering and aggregation of the Rh particles is observed after long-term reaction. Such great catalyst stability can be explained by the role of hydrothermal stable nanorod alumina support, which not only provides a unique environment for the stabilization of uniform and small-size Rh particles but also affords strong surface basic sites.     

Current advances in syngas (CO + H2) production through bi-reforming of methane using various catalysts: A review

Today, bi - reforming of methane is considered as an emerging replacement for the generation of high-grade synthesis gas (H₂:CO = 2.0), and also as an encouraging renewable energy substitute for fossil fuel resources. For achieving high conversion levels of CH₄, H₂O, and CO₂ in this process, appropriate operation variables such as pressure, temperature and molar feed constitution are prerequisites for the high yield of synthesis gas. One of the biggest stumbling blocks for the methane reforming reaction is the sudden deactivation of catalysts, which is attributed to the sintering and coke formation on active sites. Consequently, it is worthwhile to choose promising catalysts that demonstrate excellent stability, high activity and selectivity during the production of syngas. This review describes the characterisation and synthesis of various catalysts used in the bi-reforming process, such as Ni-based catalysts with MgO, MgO–Al₂O₃, ZrO_2, CeO₂, SiO₂ as catalytic supports. In summary, the addition of a Ni/SBA-15 catalyst showed greater catalytic reactivity than nickel celites; however, both samples deactivated strongly on stream. Ce-promoted catalysts were more found to more favourable than Ni/MgAl₂O₄ catalyst alone in the bi-reforming reaction due to their inherent capability of removing amorphous coke from the catalyst surface. Also, Lanthanum promoted catalysts exhibited greater nickel dispersion than Ni/MgAl₂O₄ catalyst due to enhanced interaction between the metal and support. Furthermore, La₂O₃ addition was found to improve the selectivity, activity, sintering and coking resistance of Ni implanted within SiO₂. Non-noble metal-based carbide catalysts were considered to be active and stable catalysts for bi-reforming reactions. Interestingly, a five-fold increase in the coking resistance of the nickel catalyst with Al₂O₃ support was observed with incorporation of Cr, La₂O₃ and Ba for a continuous reaction time of 140 h. Bi-reforming for 200 h with Ni-γAl₂O₃ catalyst promoted 98.3% conversion of CH₄ and CO₂ conversion of around 82.4%. Addition of MgO to the Ni catalyst formed stable MgAl₂O₄ spinel phase at high temperatures and was quite effective in preventing coke formation due to enhancement in the basicity on the surface of catalyst. Additionally, the distribution of perovskite oxides over 20 wt % silicon carbide-modified with aluminium oxide supports promoted catalytic activity. NdCOO₃ catalysts were found to be promising candidates for longer bi-reforming operations.