Computed effect of guide vane shape on performance of impulse turbine for wave energy conversion

This paper deals with the computational fluid dynamics (CFD) analysis on effect of guide vane shape on performance of impulse turbine for wave energy conversion. Initially, experiments have been conducted on the impulse turbine to validate the present CFD method and to analyse the aerodynamics in rotor and guide vanes, which demonstrates the necessity to improve the guide vanes shape. The results showed that the downstream guide vanes make considerable total pressure drop leads low performance of the turbine and hence three‐dimensional (3‐D) inlet and downstream guide vanes have been designed based on well‐known vortex theory to improve the efficiency of the turbine. In order to prove the improvement in efficiency due to 3‐D guide vanes, CFD analysis has been made on impulse turbine with 2‐D and 3‐D guide vanes for various flow coefficients. As a result, it is seen that the present CFD model can predict the experimental values with reasonable accuracy. Also, it is showed from the numerical results that the efficiency of the turbine can be improved by average of 4.5 percentage points by incorporating 3‐D guide vanes instead of 2‐D guide vanes. The physical reason for improvement in efficiency of the turbine due to 3‐D guide vanes has been explained with the CFD flow insight pictures. As the turbine operates in fluctuating flow conditions, the performance of the turbine with 2‐D and 3‐D guide vanes have been calculated numerically using quasi‐steady analysis. Furthermore, the performance of the turbine has been predicted for one year based on Irish wave climate to show the feasibility of using 3‐D guide vanes in actual sea wave conditions. Copyright © 2005 John Wiley & Sons, Ltd.     

Experimental and computational analysis on guide vane losses of impulse turbine for wave energy conversion

This paper deals with the detailed flow analysis of impulse turbine with experimental and computed results for wave energy power conversion. Initially, several turbulence models have been used in two-dimensional (2-D) computational fluid dynamic (CFD) analysis to find a suitable model for this kind of slow speed unconventional turbine. Experiments have been conducted to validate the CFD results and also to analyze the aerodynamics at various stations of the turbine. The three-dimensional (3-D) CFD model with tip clearance has been generated to predict the internal flow and to understand the effect of tip clearance leakage flow on behavior of the turbine in design and off-design conditions. As a result, it is found from the 2-D results that the comparison between computed and experimental data is good, qualitatively and the turbulence model, standard k–ε can predict the experimental values reasonably well, especially the efficiency of the turbine. Experimental results reveal that the downstream guide vanes are more responsible for low efficiency of the turbine and it is measured that 21% average pressure is lost due to downstream guide vanes. It is proved from the 3-D CFD model with tip clearance that it can predict the experimental values quantitatively and qualitatively. Furthermore, it is estimated from the computed results that the efficiency of the turbine has been reduced about 4%, due to tip clearance leakage flow at higher flow coefficients.     

Computed effects of tip clearance on performance of impulse turbine for wave energy conversion

This paper depicts numerical analysis on Impulse turbine with fixed guide vanes for wave energy conversion. From the previous investigations, it is found that one of the reasons for the mismatch between computed and experimental data is due to neglecting tip clearance ef fect. Hence, a 3-D model with tip clearance has been generated to predict the internal flow and performance of the turbine. As a result, it is found that the comparison between computed and experimental data is good, quantitatively and qualitatively. Computation has been carried out for various tip clearances to understand the physics of tip leakage flow and effect of tip clearance on performance of such unconventional turbine. It is predicted that the turbine with 0.25% tip clearance performs almost similar to the case of without tip clearance for the entire flow coefficients. The designed value of 1% tip clearance has been validated numerically and computed that the efficiency of the turbine has been reduced around 4%, due to tip clearance flow at higher flow coefficients.     

A twin unidirectional impulse turbine for wave energy conversion

A twin unidirectional impulse turbine has been proposed in order to enhance the performance of wave energy plant.This turbine system uses two unidirectional impulse turbines and their flow direction is different from each other.However,the turbine characteristics have not been clarified to date.The performances of a unidirectional impulse turbine under steady flow conditions were investigated experimentally by using a wind tunnel with large piston/cylinder in this study.Then,efficiency of the twin impulse turbine have been estimated by a quasi-steady analysis using experimental results.     

Effect of guide vane shape on the performance of a Wells turbine

A Wells turbine has inherent disadvantages: lower efficiency and poorer starting characteristics. Providing guide vanes on either side of the rotor could be one of the most effective ways of improving its performance. Several papers have demonstrated the usefulness of 2D guide vanes so far. In order to achieve further improvement in the performance of the Wells turbine, the effect of 3D guide vanes has been investigated experimentally by testing a model under steady flow conditions. Then, the running and starting characteristics under irregular flow conditions have been obtained by a computer simulation using quasi-steady analysis. It is found that the running and starting characteristics of the Wells turbine with 3D guide vanes are superior to those with 2D guide vanes.     

Performance of an impulse turbine with fixed guide vanes for wave power conversion

A simple fixed geometry impulse turbine has been studied as a suitable power converter in Oscillating Water Column based wave power plants. Comparison with the Wells turbine, which is the commonly used self-rectifying turbine in such applications, shows it to be superior in performance under irregular flow conditions. Optimum guide vane angle for maximum efficiency has been arrived at based on the five angles tested.     

Performance of Wells Turbine with Guide Vanes for Wave Energy Conversion

ＰｅｒｆｏｒｍａｎｃｅｏｆＷｅｌｌｓＴｕｒｂｉｎｅｗｉｔｈＧｕｉｄｅＶａｎｅｓｆｏｒＷａｖｅＥｎｅｒｇｙＣｏｎｖｅｒｓｉｏｎＭａｎａｂｕＴａｋａｏ；ＴｏｓｈｉａｋｉＳｅｔｏｇｕｃｈｉ；ＫｅｎｊｉＫａｎｅｋｏ（ＤｅｐａｒｔｍｅｎｔｏｆＭｅｃｈａｎｉｃａ...     

Impulse turbine with 3D guide vanes for wave energy conversion

In this study, in order to achieve further improvement of the performance of an impulse turbine with fixed guide vanes for wave energy conversion, the effect of guide vane shape on the performance was investigated by experiment. The investigation was performed by model testing under steady flow condition. As a result, it was found that the efficiency of the turbine with 3D guide vanes are slightly superior to that of the turbine with 2D guide vanes because of the increase of torque by means of 3D guide vane, though pressure drop across the turbine for the 3D case is slightly higher than that for the 2D case.     

Multiple surrogate based optimization of a bidirectional impulse turbine for wave energy conversion

Oscillating water column based wave energy extracting system has a low efficiency due to the poor performance of its principal power extracting component, the bidirectional turbine. In the present work, flow over a bidirectional impulse turbine was simulated using CFD technique and optimized using multiple surrogates approach. The surrogates being problem dependent may produce unreliable results, if a wrong surrogate is selected. Hence, multiple surrogates such as response surface approximation, radial basis function, Kriging and weighted average surrogates were incorporated in this problem. Same design points were used to generate multiple optima via multiple surrogates to enhance the robustness of the optimization process. Numbers of guide vanes and rotor blades were chosen as the design variables, and the objective was to maximize the blade efficiency. Reynolds-averaged Navier–Stokes equations were solved for analyzing the flow physics. The computed results were used to train the surrogates and find the optimal points via hybrid genetic algorithm. The surrogates were further applied to find the optimal flow parameters by changing flow velocity and turbine speed. The relative efficiency enhancement through our present approach was about 16%. Detailed methodologies, analysis of the results and surrogate applicability have been presented in this paper.     

Effects of turbine damping on performance of an impulse turbine for wave energy conversion under different sea conditions using numerical simulation techniques

This paper presents the work carried out to predict the behavior of a 0.6 m impulse turbine with fixed guide vanes with 0.6 hub to tip (H/T) ratio under real sea conditions.This enhances the earlier work done by authors on the subject by including the effects of damping applied by the turbine. Real wave data for different wave sites were used as the input data. A typical oscillating water column (OWC) geometry has been used for this simulation. Standard numerical techniques were employed to solve the non-linear behavior of the sea waves. Considering the quasi-steady assumption, uni-directional steady flow experimental data were used to simulate the turbine characteristics under irregular unsteady flow conditions. The test rotor used for this simulation consisted of 30 blades with elliptical profile with a set of symmetric, fixed guide vanes on both up-stream and down-stream sections of the rotor, with 26 vanes each. The results show that the performance of this type of turbine depends on the level of damping applied by the turbine and the prevailing wave site conditions. The objective of this paper is to predict the effects of applied damping on the behavior of impulse turbine under irregular, unsteady conditions for wave power conversion using numerical simulation.     

Design and performance analysis of impulse turbine for a wave energy power plant

Wave energy is the most abundant source of renewable energy in the World. For the last two decades, engineers have been investigating and defining different methods for power extraction from wave motion. Two different turbines, namely Wells turbine and impulse turbine with guide vanes, are most commonly used around the world for wave energy power generation. The ultimate goal is to optimize the performance of the turbine under actual sea conditions. The total research effort has several strands; there is the manufacture and experimental testing of new turbines using the Wave Energy Research Team's (WERT) 0.6 m turbine test rig, the theoretical and computational analysis of the present impulse turbine using a commercial software package and finally the prediction of the performance of the turbine in a representative wave power device under real sea conditions using numerical simulation. Also, the WERT 0.6 m turbine test rig was upgraded with a data acquisition and control system to test the turbine in the laboratory under real sea conditions using the computer control system. As a result, it is proven experimentally and numerically that the turbine efficiency has been raised by 7% by reducing the hub‐to‐tip ratio from 0.7 to 0.6. Effect of tip clearance on performance of the turbine has been studied numerically and designed tip clearance ratio of 1% has been validated. From the numerical simulation studies, it is computed that the mean conversion efficiency is reduced around 5% and 4.58% due to compressible flow and damping effects inside OWC device. Copyright © 2005 John Wiley & Sons, Ltd.     

Multi-objective optimization of the airfoil shape of Wells turbine used for wave energy conversion

Wells turbine is one of the technical systems allowing an efficient use of the power contained in oceans’ and seas’ waves with a relatively low investment level. It converts the pneumatic power of the air stream induced by an Oscillating Water Column into mechanical energy. The standard Wells turbines show several well-known disadvantages: low tangential force, leading to low power output from the turbine; high undesired axial force; usually a low aerodynamic efficiency and a limited range of operation due to stall. In the present work an optimization process is employed in order to increase the tangential force induced by a monoplane Wells turbine using symmetric airfoil blades. The automatic optimization procedure is carried out by coupling an in-house optimization library (OPAL (OPtimization ALgorithms)) with an industrial CFD (Computational Fluid Dynamics) code (ANSYS-Fluent). This multi-objective optimization relying on Evolutionary Algorithms takes into account both tangential force coefficient and turbine efficiency. Detailed comparisons are finally presented between the optimal design and the classical Wells turbine using symmetric airfoils, demonstrating the superiority of the proposed solution. The optimization of the airfoil shape leads to a considerably increased power output (average relative gain of +11.3%) and simultaneously to an increase of efficiency (+1%) throughout the full operating range.     

Computational analysis of performance and flow investigation on wells turbine for wave energy conversion

Wells turbine is a self-rectifying airflow turbine capable of converting pneumatic power of the periodically reversing air stream in oscillating water column into mechanical energy. This paper reports the computational analysis on performance and aerodynamics of Wells turbine with the NACA 0021 constant chord blades. Studies have been made at various flow coefficients covering the entire range of flow coefficients over which the turbine is operable. The present computational model can predict the performance and aerodynamics of the turbine quantitatively and qualitatively. The model also predicted the flow coefficient at which the turbine stalls, with reasonable accuracy.     

A review of impulse turbines for wave energy conversion

Oscillating Water Column based wave energy plants convert wave energy into low pressure pnuematic power in the form of bi-directional air flows. Air turbines which are capable of rotating uni-directionally in bi-directional air flow, otherwise also known as self-rectifying turbines, are used to extract mechanical shaft power which is further converted into electrical power by a generator. This paper reviews the state of the art in self-rectifying impulse air turbines. New results on optimum parameters for the fixed-guide-vane impulse turbine are also presented. Starting characteristics and conversion efficiencies of two types of impulse turbines are compared with the well known Wells turbine.     

A modified Wells turbine for wave energy conversion

The method of wave energy conversion utilises an oscillating water column (OWC). The OWC converts wave energy into low-pressure pneumatic energy in the form of bi-directional airflow. Wells turbine with its zero blade pitch setting has been used to convert this pneumatic power into uni-directional mechanical shaft power. Measurements in OWC based wave energy plants in India and Japan show that the airflow velocity is not equal in both directions. The velocity is more when the airflows out to the atmosphere (exhalation) than in the reverse direction. It may be advantageous to set the rotor blade pitch asymmetrically at a positive pitch so as to achieve a higher mean efficiency in a wave cycle. Towards this objective, performance characteristics of a turbine with different blade setting angles in steady flow were found by experimentation. Quasi-steady analysis was then used to predict the mean efficiency for a certain variation of air velocity with time. This variation with time was taken as pseudo-sinusoidal wherein the positive part of the cycle was taken as a half sine-wave whose amplitude is greater than that of the negative half sine-wave. Such a variation is representative of what happens in reality. For exhalation velocity amplitude to inhalation velocity ratios 0.8 and 0.6, a rotor blade setting angle of 2° was found to be optimum.     

Effects of a turbine guide vane on hydrogen-air rotating detonation wave propagation characteristics

The rotating detonation engine is a new machine that can generate thrust via continuous rotating detonation waves (RDWs). In this study, experiments were performed on a structure combining a rotating detonation combustor (RDC) and a turbine guide vane to investigate the propagation characteristic of hydrogen-air RDW. The results showed that the velocity of detonation wave initially increased and then decreased with the increase of equivalence ratio, and it got a velocity of 84% Chapman-Jouguet value. The velocity of detonation wave generally rose by 4.31% comparing with the no guide vane tests, while the scope of steady-operation state became narrow. The oscillation pressure was reduced by 64% after passing through the guide vane, and the magnitude of pressure was only 0.4 bar at the guide vane exit. Meanwhile, part of the shock wave was reflected back to combustor resulting in some small pressure disturbances, and the propagation mode of reflected wave was related to the propagation direction of RDW.     

Design method of guide vane for Wells turbine

Guide vanes are installed in the Wells turbine in order to improve its efficiency, self-rotating characteristics and off design performance with stall. This work attempts to explain the role of these guide vanes on the basis of momentum theory. It is shown that the upstream vanes are more effective in enhancing efficiency than the downstream ones. A design method for guide vanes is suggested based on experimental data and potential theory. Experimental studies carried out by the author confirm the theory proposed.     

Wells turbine for wave energy conversion: a review

In the past 20 years, the use of wave energy systems has significantly increased, generally depending on the oscillating water column concept. Wells turbine is one of the most efficient oscillating water column technologies. This article provides an updated and a comprehensive account of the state‐of‐the‐art research on Wells turbine. Hence, it draws a roadmap for the contemporary challenges, which may hinder future reliance on such systems in the renewable energy sector. In particular, the article is concerned with the research directions and methodologies, which aim at enhancing the performance and efficiency of Wells turbine. The article also provides a thorough discussion of the use of CFD for performance modeling and design optimization of Wells turbine. It is found that a numerical model using the CFD code can be employed successfully to calculate the performance characteristics of W‐T as well as other experimental and analytical methods. The increase of research papers about CFD, especially in the last 5 years, indicates that there is a trend that considerably depends on the CFD method. Copyright © 2016 John Wiley & Sons, Ltd.     

分流导叶垂直轴风力机气动性能研究

为提高垂直轴风力机气动性能,提出一种随相位角变化而改变相对夹角的分流导叶结构。以NACA0021为基础翼型,采用计算流体力学方法对分流导叶作用下垂直轴风力机风能利用系数、单叶片瞬时转矩、压力系数及速度场进行数值分析。结果表明：静态和动态分流导叶均可提高垂直轴风力机气动性能,且动态分流导叶提升效果更为显著;相较于静态分流导叶,动态分流导叶垂直轴风力机在尖速比为2.33时风能利用系数最高可提升23%,在尖速比为2.03时静态分流导叶垂直轴风力机较原始垂直轴风力机风能利用系数提高37%;分流导叶也可使最佳尖速比前移,稳定叶片转矩波动,提升垂直轴风力机的运行稳定性。     

Design charts for impulse turbine wave energy extraction using experimental data

This study presents newly developed charts to aid in early design of impulse turbine for wave energy extraction. These charts, based on the available experimental data, represent a simple approach to the performance evaluation of the turbine. The novel approach is applied in a case study that considers the optimum diameter design selection of next-generation impulse turbine power take-off. This allowed the selection of the correct impulse turbine sizing for a required rated power. The result is consistent for such an application, where the optimum rotor diameter would be 1.6 m for a maximum rated power of 400 kW.