Synthesis,characterization, and ligating behavior of poly[N,N‐p‐phenylene bisacryl (methacryl)amide]

Monomers of diacylated amine were synthesized by the reaction of acryloyl chloride or methacryloyl chloride with p‐phenylenediamine. Heating DMF solution of these monomers at 75°C in the presence of AIBN as an initiator gave the corresponding polymer. The solid metallopolymer complexes with different metal salts were isolated either by the in situ addition of the monomer, metal salt, and initiator at 75°C or by the reaction of the isolated polymer with the metal salt at 150°C. The monomers, polymers, and their metallopolymer compounds were characterized using elemental analysis, IR, NMR (¹H and ¹³C), and MS spectral measurements in addition to thermal analysis. The IR data showed that the coordinating atoms of the polymer are dependent on the reaction temperature. The ion selectivity of the isolated polymers toward different metal ions either for a single metal ion or in a mixture as aqueous solutions are studied by the batch techniques. Energy dispersive spectroscopy (EDS) measurements showed that both polymers are more selective to Hg²⁺ and Pb²⁺. The morphology of the polymers and their metallopolymer complexes at different temperature was also studied. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 2412–2422, 2006     

Studies on polyacrylates containing pendant ligand with carbonyl and hydroxyl functions and their divalent metal complexes

A series of monomers were prepared by reacting (meth)acryloyl chloride with 2,4‐dihydroxybenzophenone, 2,4‐dihydroxybenzaldehyde, and 2,4‐dihydroxyacetophenone, respectively. The monomers were polymerized in dimethylformamide (DMF) at 70°C using benzoyl peroxide as an initiator. Polymer–metal complexes were obtained from DMF solutions of polymers with an aqueous solution of metal ions. The polymers and polymer–metal complexes were characterized by elemental analysis and spectral studies. The IR spectra of these complexes suggest that the metals are coordinated through the oxygen of the carbonyl group and the oxygen of the phenolic–OH group. The electronic spectra, electron paramagnetic resonance (EPR) spectra, and magnetic moments of polychelates showed an octahedral and square planar structure for Ni(II) and Cu(II) complexes, respectively. X‐ray diffraction studies revealed that polychelates are highly crystalline. The thermal and electrical properties, catalytic activity, and structure–property relationships are discussed. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 2083–2090, 2003     

Polymer complexes: LIX. Supramolecular structural,spectral and thermal analysis of N‐[2‐(6‐aminopyridino)] acrylamide polymer complexes

Novel ligand N‐[2‐(6‐aminopyridino)] acrylamide (APA) is prepared via amidation of 2,6‐diaminopyridine with acryloyl chloride in dry benzene as solvent. The ligand is characterized on the basis of elemental analysis, infra‐red (IR) analysis and ¹H nuclear magnetic resonance. Metal–polymer complexes are reported and characterized based on elemental analysis, molar conductance, magnetic susceptibility measurements, IR, ¹H nuclear magnetic resonance, electronic spectra and thermal analysis. The molar conductance of the polymer complexes in dimethylformamide corresponds to a 1:1/1:2 electrolyte, which is non‐electrolytic. IR spectra show that polyAPA is coordinated to the metal ions in a uni‐negatively bidentate manner with N, O donor sites of azomethine N and deprotonated enolic‐O. All the polymer complexes are of high spin type. On the basis of spectral studies an octahedral geometry may be assigned for Co(II) and Ni(II) polymer complexes. The thermal stabilities of the polymer complexes were studied and the activation energies of the degradation were calculated. Copyright © 2011 Society of Chemical Industry     

Fluorescence properties of ternary complexes of polymer-bond triphenylphosphine,triphenylarsine, triphenylstibine,and triphenylbismuthine,rare earth metal ions,and thenoyltrifluoroacetone

Rare earth metal ions containing polymer ternary complexes were synthesized and characterized. The functional polymers investigated were polymer-bond triphenylphosphine (PBDP), polymer-bond triphenylarsine (PBDAs), polymer-bond triphenylstibine (PBDSb), and polymer-bond triphenylbismuthine (PBDBi) as polymer ligands. Several substances, such as thenoyltrifluoroacetone (TTA), and 8-hydroxyquinoline (oxin), phenanthroline (phen) were used as low molecular weight ligands. The results show that TTA is the best low molecular weight ligand among them. The fluorescence properties of synthesized complexes were investigated; PBDAs is a better polymer ternary complex that possesses stronger fluorescence intensity coordinated with any low molecular weight ligand. The fluorescence lifetimes of Eu³⁺-containing polymer ternary complexes are between 0.350 and 0.469 MS. The reaction conditions of the formation and stability of rare earth metal ions–polymer–TTA ternary complexes are discussed. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 68: 1605–1611, 1998     

Studies of poly(8‐hydroxy‐4‐azoquinolinephenol‐formaldehyde) and its metal complexes

Poly(8‐hydroxy‐4‐azoquinolinephenol‐formaldehyde) resin (8H4AQPF) was prepared by condensing 8‐hydroxy 4‐azoquinoline phenol with formaldehyde (1 : 1 mol ratio) in the presence of oxalic acid. Polychelates were obtained when the DMF solution of poly(8H4AQPF) containing a few drops of ammonia was treated with the aqueous solution of Cu(II) and Ni(II) ions. The polymeric resin and polymer–metal complexes were characterized with elemental analysis and spectral studies. The elemental analysis of the polymer–metal complexes suggested that the metal‐to‐ligand ratio was 1 : 2. The IR spectral data of the polychelates indicated that the metals were coordinated through the nitrogen and oxygen of the phenolic ? OH group. Diffuse reflectance spectra, electron paramagnetic resonance, and magnetic moment studies revealed that the polymer–metal complexes of the Cu(II) complexes were square planar and those of the Ni(II) complexes were octahedral. X‐ray diffraction studies revealed that the polymer metal complexes were crystalline. The thermal properties of the polymer and polymer–metal complexes were also examined. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 1506–1510, 2006     

Supramolecular Assembly on Coordination of Azopolymer Complexes: A Review

This review gives an account of the coordination chemistry of supramolecular azopolymer complexes. The syntheses and structures of azomonomers and their azopolymer complexes were described. Spectral techniques such as (IR, ¹H-NMR, ESR) and thermal analysis were investigated. Supramolecular architectures assembled were exhibited through weak interaction including hydrogen bonding and π–π stacking. The spectral data indicate geometry of azopolymer complexes and the orbital reduction factors. ESR spectral data provided information about their structures on the basis of Hamiltonian parameters and degree of covalency. All the azopolymer complexes are ESR active due to the presence of an unpaired electron. The force constant F_U–O(mdyn/Å) and the bond length R_U–O (Å) of the U–O bond were calculated from the IR data and related to the electronic properties of the substituents. Wilson's method, the matrix method, Badger's formula, and the Jones and El-Sonbati equations were used to calculate the U–O bond distances from the values of the stretching and interaction force constants. The most probable correlations between U–O force constant to U–O bond distance were satisfactorily discussed in terms of Badger's rule, and the Jones and El-Sonbati equations. The thermal stability was investigated using thermogravimetric analysis. The results showed that the azopolymer complexes are mostly more stable than the homopolymer. The stability of the proton ligand/metal ligand constants in the monomeric and polymeric forms was studied carefully using potentiometery. Based on the thermodynamic functions, the dissociation process is nonspontaneous, endothermic and entropically unfavorable. The metal complexes that were formed exhibited spontaneous, endothermic and entropically favorable behavior.     

Studies on various divalent metal complexes of poly(2-hydroxy-4-acryloyloxybenzophenone) in aqueous medium

2-Hydroxy-4-acryloyloxybenzophenone (2H4ABP) prepared by reacting acryloyl chloride with 2,4-dihydroxybenzophenone, was polymerized in 2-butanone at 65°C using benzoyl peroxide as initiator. Polychelates were obtained in the alkaline solution of poly(2H4ABP) with aqueous solutions of metal ions such as Ni(II), Mn(II), Co(II), Ca(II), Cd(II) and Zn(II). The polymer and polychelates were characterized by elemental analyses and spectral studies. Elemental analyses of the polychelates suggest that the metal-to-ligand ratio is 1: 2. The IR spectral data of the polychelates indicate that the metals were coordinated through the oxygen of the keto group and oxygen of the phenolic −OH group. The diffuse reflectance spectra, EPR and magnetic moments studies reveal that the polychelates of Cu(II) complex are square planar, and Ni(II), Mn(II) and Co(II) complexes are octahedral, while Ca(II), Cd(II) and Zn(II) complexes are tetrahedral. X-ray diffraction studies revealed that the polychelates are highly crystalline. The thermal and electrical properties of polymer and polymer–metal complexes are discussed. © 1998 SCI.     

New polymeric Schiff base and its metal complexes

A novel polymeric Schiff base was synthesized by the reaction of a Schiff base from 2,4‐dihydroxy benzaldehyde and aniline with acryloyl chloride and was polymerized in methyl ethyl ketone at 70°C with benzoyl peroxide as a free‐radical initiator. Polychelates were obtained in an alkaline solution of poly(2‐hydroxy‐4‐acryloyloxy‐N‐phenylbenzylidine) with aqueous solutions of metal ions such as Cu(II), Ni(II), Co(II), Ca(II), Cd(II), Mn(II), and Zn(II). The polymeric Schiff base and polychelates were characterized with elemental analysis and spectral studies. The elemental analysis of the polychelates suggested that the metal‐to‐ligand ratio was 1:2. The IR spectral data of the polychelates indicated that the metals were coordinated through the nitrogen and oxygen of the phenolic ? OH group. Diffuse reflectance spectra, electron paramagnetic resonance, and magnetic moment studies revealed that the polychelates of the Cu(II) complex were square‐planar, those of the Ni(II), Mn(II), and Co(II) complexes were octahedral, and those of the Ca(II), Cd(II), and Zn(II) complexes were tetrahedral. X‐ray diffraction studies revealed that the polychelates were highly crystalline. The thermal properties of the Schiff base and polychelates were also examined. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 494–500, 2004     

Synthesis,characterization, and coordination behavior of copoly(styrene‐maleimide) functionalized with terpyridine

A maleimide functionalized terpyridine, 4′(4‐maleimidophenyl)‐2, 2′ : 6′, 2″‐terpyridine, was synthesized and copolymerized with styrene via radical polymerization. The synthesized monomer was characterized by CHN elemental analysis, FT‐IR, ¹H NMR, and Mass spectrometry. The structure of polymer was also confirmed by FT‐IR and UV‐Vis spectroscopy. The resulting polymer was soluble in chloroform and polar aprotic solvents, and showed an inherent viscosity of 1.5 dL/g in N,N‐dimethyl formamide at 25°C. The polymer solution in CHCl₃/methanol showed a metal‐ligand charge‐transfer band of 586 nm upon addition of Fe(II) ion, exhibiting that coordination between terpyridine units and Fe(II) had occurred. The thermal stability of polymer before and after complexation with Fe(II) was examined by thermogravimetric analysis. For polymer before complexation, the weight loss started at 180°C whereas for complexed polymer it started at 260°C, which demonstrates good thermal stability of complexed polymer. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis and Characterization of Thermally Stable and Biologically Active Metal-Based Schiff Base Polymer

Schiff base was prepared via condensation of ethanedihydrazide with 2-hydroxy benzaldehyde and further this monomeric Schiff base polymerize with formaldehyde and barbituric acid and form polymeric Schiff base (PLSB) ligand. The ligand and its polymer metal complexes were characterized by using elemental analysis, IR, UV–VIS, ¹HNMR, magnetic susceptibility and thermogravimetric studies. On basis of elemental analysis and spectral studies, six coordinated geometry was assigned for Mn(II), Co(II) and Ni(II) complexes and four coordinated for Cu(II) and Zn(II) complexes. PLSB act as a tetradentate and coordinate through the azomethine nitrogen and phenolic oxygen. The thermal behavior of these polymer metal complexes showed that the hydrated complexes losses water molecules of hydration in the first step followed immediately by decomposition of the anions and ligand molecules in the subsequent steps. The (PLSB) ligands and its polymer metal complexes were screened against bacterial species Escherichia coli, Staphylococcus aureus, Bacillus subtilis and fungal species Aspergillus flavus, Candida albicans, A. niger. The activity data show that the metal complexes were more potent than the parent Schiff bases.     

钴(Ⅱ)、镍(Ⅱ)、铜(Ⅱ)与2,4-二羟基二苯甲酮配合物的合成与表征

以2,4-二羟基二苯甲酮(BP)为配体与M2+(M=Co,Ni,Cu)合成了几种新的配合物,研究了配合物的热稳定性。通过元素分析、IR、UV、TG-DTA和电导分析对配合物进行了表征。结果表明配合物的组成为M(BP)2.nH2O,配体中羰基氧和邻位羟基氧与中心离子配位构成平面正方形结构,三种配合物的热稳定性为:Co(Ⅱ)>Ni(Ⅱ)>Cu(Ⅱ)。     

New antimicrobial polyurea: Synthesis,characterization, and antibacterial activities of polyurea‐containing thiosemicarbazide–metal complexes

A novel class of polymer–metal complexes was prepared by the condensation of a polymeric ligand with transition‐metal ions. The polymeric ligand was prepared by the addition polymerization of thiosemicarbazides with toluene 2,4‐diisocyanate in a 1 : 1 molar ratio. The polymeric ligand and its polymer–metal complexes were characterized by elemental analysis, thermogravimetric analysis, Fourier transform infrared spectroscopy, and ¹³C‐NMR and ¹H‐NMR spectroscopy. The geometries of the central metal ions were determined by electronic spectra (UV–visible) and magnetic moment measurement. The antibacterial activities of all of the synthesized polymers were investigated against Bacillus subtilis and Staphylococcus aureus (Gram positive) and Escherichia coli and Salmonella typhi (Gram negative). These compounds showed excellent antibacterial activities against these bacteria with the spread plate method on agar plates, and the number of viable bacteria were counted after 24 h of incubation period at 37°C. The antibacterial activity results revealed that the Cu(II) chelated polyurea showed a higher antibacterial activity than the other metal‐chelated polyureas. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

The DC Electrical Conductivity of the Direct Electrochemically Synthesized Poly(azomethinethiosemicarbazone)–Metal Complexes

Anodic oxidation of Co, Ni, Cu, Zn, Cd and Sn metals in an anhydrous acetone solution of poly(azomethinethiosemicarbazone) (PATS) yields the PATS–metal complexes. Chemical and thermal analyses as well as FTIR and electronic spectral data are presented to confirm the formulation of the isolated materials. The spectral data show that the ligand polymer is coordinated to the metal ions via the thiol sulfur atom and the nitrogen of the azomethine group. Thermogravimetric measurements (TGA) and differential thermal analyses (DTA) were used to obtain the energy of decomposition of PATS and its metal polymer complexes. The DC electrical conductivity measurements of PATS and the polymer complexes as annealed and 5% iodine doped forms were measured in the range 300–500 K. The products gave electrical conductivities in the semi-conducting region that increased with temperature.     

Effect of the nature of crosslinking agent on the unusual metal ion specificity and selectivity of N,N‐bis(2‐aminoethyl)polyacrylamide

Metal ion desorbed crosslinked N,N‐bis(2‐aminoethyl)polyacrylamides showed enhanced specificity for the desorbed metal ion, and these polymers selectively rebind the desorbed metal ion from a mixture of metal ions. For this, polyacrylamide with 8 mol % divinylbenzene (DVB) and N,N′‐methylene‐bisacrylamide (NNMBA) crosslinking were prepared by solution polymerization. Diethylenetriamino functions were incorporated into the polymers by polymer analogous reactions. The complexing ability of the amino polymers were investigated toward various transition metal ions like Co(II), Ni(II), Cu(II), and Zn(II). Polymeric ligand and metal complexes were characterized by various spectral methods. The removal of the metal ion from the polymer matrix resulted in a memory for the desorbed metal ion. On rebinding, these polymers specifically rebind the desorbed metal ion and from a mixture of metal ions, it showed selectivity to the desorbed metal ion. Thus, the Cu(II) desorbed polymer specifically and selectively rebind Cu(II) ion from a mixture of Cu(II) and other metal ion. This selectivity is higher in the rigid DVB‐crosslinked system, resulting from the high rigidity of the crosslinked matrix compared to the semirigid NNMBA‐crosslinked system. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Study of complexes of poly(vinyl pyrrolidone) with copper and cobalt on solid state

A polymer–metal complex is a metal complex containing a polymer ligand, showing a remarkably specific structure in which central metal ions are surrounded by a colossal polymer chain. Based on this polymeric ligand, the polymer–metal complex has interesting and important characteristics, especially catalytic activities. This activity is different from that of the corresponding ordinary metal complex of low molecular weight. In this work we studied the synthesis and characterization, in the solid state, of different poly(vinyl pyrrolidone)–cobalt (PVP/Co) and –copper (PVP/Cu) complexes. We used differential thermal analysis and FTIR as the experimental techniques. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 1512–1518, 2004     

Synthesis of poly[N′‐(2‐cyanoacetyl)acrylohydrazide] and its copolymers with styrene and N‐phenylacrylamide: Characterization,complexation, thermal stability,swelling, and morphology

N′‐(2‐cyanoacetyl)acrylohydrazide (CAH) was obtained with the treatment of 2‐cyanoacetohydrazide with acryloyl chloride in acetonitrile. The obtained acrlyoyl derivative was transferred to the corresponding polymer, poly[N′‐(2‐cyanoacetyl)acrylohydrazide] (PCAH), through treatment with 2,2′‐azobisisobutyronitrile at 75°C. Copolymers with styrene or N‐phenyl acrylamide monomers were synthesized with different ratios. The structures of these polymers were characterized with elemental analysis and spectral data. The morphology, metal uptake, and ion selectivity of the polymers were studied. In addition, the swelling behavior of the polymer and metallopoymer complexes at different times of drying was also investigated. Thermogravimetric analysis of the polymer and polymer complexes under air reflected that PCAH–Pb was the most stable, followed by PCAH, PCAH–Hg, PCAH–Cu, PCAH–Ni, and PCAH–Co. A similar stability with little difference was reported under nitrogen. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Studies on poly(2-hydroxy-4-acryloyloxybenzophenone)-metal complexes

2-Hydroxy-4-acryloyloxybenzophenone (HABP), prepared from acryloyl chloride with 2,4-dihydroxybenzophenone, was polymerized in methyl ethyl ketone at 70°C using benzoyl peroxide as initiator. Polychelates were obtained in the dimethylformamide solution of poly(HABP) containing a few drops of ammonia with the aqueous solution of Cu(II)/Ni(II) ions. The polymer and polychelates were characterized by elemental analyses and spectral studies. Elemental analyses of the polychelates suggest a metal to ligand ratio of 1:2. The IR spectral data of polychelates indicate that the metals were coordinated through the oxygen of the keto group and the oxygen of the phenolic-OH group. The diffuse reflectance spectra, electron paramagnetic resonance, and magnetic moments of the polychelates show an octahedral and square planar structure for poly(HABP)-Ni(II) and poly(HABP)-Cu(II) complexes, respectively. X-ray diffraction studies revealed a high crystalline nature of the polychelates. The thermal properties of polymer and metal complexes and their catalytic activity are discussed. © 1996 John Wiley & Sons, Inc.     

Synthesis, Spectral, Morphology, Thermal Degradation Kinetics and Antibacterial Studies of Terpolymer Metal Complexes

Terpolymer metal complexes involving transition metal ions such as Cu(II), Mn(II) and Zn(II) were prepared using a terpolymer ligand derived from anthranilic acid–phenyl hydrazine–formaldehyde (APHF). The terpolymer ligand and its metal complexes were intended to spectral characterizations viz. FTIR, electronic, ESR, ¹H NMR and ¹³C NMR to elucidate the structural confirmations. The number, weight, and size average molecular weights of the terpolymer ligand were determined by gel permeation chromatography (GPC). The empirical formula of the repeating unit for both the terpolymer ligand and its metal complexes was clearly justified by elemental analysis. The thermal stability of the ligand and its metal complexes was established by thermogravimetric analysis (TGA). On basis of the TGA data, the kinetic and thermodynamic parameters such as activation energy (E _a), order of reaction (n), entropy change (ΔS), apparent entropy (S*), frequency factor (Z) and free energy change (ΔF) were calculated using Freeman–Carroll and Sharp–Wentworth methods. Further the degradation mechanism for the thermal decomposition was also identified from Phadnis–Desphande method. Scanning electron microscopy (SEM) and X-ray diffraction (XRD) analysis were used to establish the surface morphology and nature of the terpolymer ligand and its metal complexes. In addition, the terpolymer ligand and its metal complexes were screened against the growth of few bacteria and their inhibitions were measured and reported.     

Metal Complexes of a Novel Terpolymer Ligand: Synthesis, Spectral, Morphology, Thermal Degradation Kinetics and Antimicrobial Screening

2-amino-6-nitro-benzothiazole and thiosemicarbazide with formaldehyde (BTF) terpolymer ligand and its metal complexes have been synthesized. The plausible structure of the synthesized BTF terpolymer ligand was elucidated on the basis of elemental analysis and spectral studies such as FTIR, UV-Vis, ¹H and ¹³C NMR spectroscopy. Gel permeation chromatography (GPC) was used to determine the molecular weight of the terpolymer. The terpolymer metal complexes were analyzed by elemental analysis, molar conductivity measurements, and magnetic susceptibilities. The structure and geometry of the metal complexes were confirmed by various spectral techniques viz. electronic, ESR, FTIR and NMR spectroscopy. The morphology of the BTF terpolymer ligand and its metal complexes was examined using scanning electron microscopy (SEM) and X-ray diffraction (XRD) analysis. The thermal decomposition behaviour of the terpolymer ligand and its complexes was determined using thermogravimetric analysis (TGA). Freeman–Carroll (FC), Sharp–Wentworth (SW) and Phadnis–Deshpande (PD) methods were used to calculate the thermal activation energy (E_a), order of reaction (n), entropy change (ΔS), free energy change (ΔF), apparent entropy (S*) and frequency factor (Z) from the TGA data. Phadnis–Deshpande method was also used to propose the thermal degradation model for the decomposition pattern of the terpolymer ligand. The terpolymer ligand and its metal complexes were screened for its antimicrobial activity against chosen microbes.     

DC electrical conductivity of polyazomethinethiosemicarbazone metal complexes

Polyazomethinethiosemicarbazone (PATS) metal complexes of Ni(II), Co(II), Cu(II), Zn(II), Cd(II) and Hg(II) metal ions were prepared by reacting the polymer ligand (PATS) with the appropriate metal salt in refluxing DMSO. Elemental analyzes as well as FTIR and electronic spectral data are presented to confirm the formulation of the isolated materials. The spectral data show that the ligand polymer is bonded to the metal ions via the thiol sulfur atom and coordinated through the nitrogen of azomethine group. The DC electrical conductivity measurements of PATS and its metal complexes were measured in the range 300–500 K in the annealed and 5% iodine doped forms. The products gave electrical conductivity in the semiconducting region that increased by heat. The DC electrical conductivity is interpreted using the band gap theory using solitons, polarons and bipolarons. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010