Anticancer Properties of Halogenated Pyrrolo[3,2‐d]pyrimidines with Decreased Toxicity via N5 Substitution

Halogenated pyrrolo[3,2‐d]pyrimidine analogues have shown antiproliferative activity in recent studies, with cell accumulation occurring in the G₂/M stage without apoptosis. However, the mechanism of action and pharmacokinetic (PK) profile of these compounds has yet to be determined. To investigate the PK profile of these compounds, a series of halogenated pyrrolo[3,2‐d]pyrimidine compounds was synthesized and first tested for activity in various cancer cell lines followed by a mouse model. EC₅₀ values ranged from 0.014 to 14.5 μm , and maximum tolerated doses (MTD) in mice were between 5 and 10 mg kg^?1. This indicates a wide variance in activity and toxicity that necessitates further study. To decrease toxicity, a second series of compounds was synthesized with N5‐alkyl substitutions in an effort to slow the rate of metabolism, which was thought to be leading to the toxicity. The N‐substituted compounds demonstrated comparable cell line activity (EC₅₀ values between 0.83–7.3 μm ) with significantly decreased toxicity (MTD=40 mg kg^?1). Finally, the PK profile of the active N5‐substituted compound shows a plasma half‐life of 32.7 minutes, and rapid conversion into the parent unsubstituted analogue. Together, these data indicate that halogenated pyrrolo[3,2‐d]pyrimidines present a promising lead into potent antiproliferative agents with tunable activity and toxicity, and rapid metabolism.     

Improving the Frying Performance and Oxidative Stability of Refined Soybean Oil by Tocotrienol‐Rich Unsaponifiable Matters of Kolkhoung (Pistacia khinjuk) Hull Oil

Increasing consumer awareness for all natural products has quickly led to growing research on new resources of potent and profitable natural antioxidants. In this context, for the first time, the Kolkhoung hull oil (KHO) (Pistacia khinjuk)‐unsaponifiable matters (USM) (UHO) (100, 200, and 400 mg kg^?1) were incorporated into refined soybean oil (RSO) and the oxidative stability of prepared oils was measured during 32 hours of frying. Then, the obtained results (oxidative stability) were compared to the samples containing tert‐butyl hydroquinone (TBHQ) (100 mg kg^?1) as a common synthetic antioxidant. According to the results of oxidative stability assays of acid values, conjugated diene values and carbonyl values, and total polar compounds, the incorporation of UHO, particularly at a concentration of 200 mg kg^?1, was more efficient in improving the oxidative stability compared to TBHQ. The tocol content of KHO (2043.4 mg kg^?1) was higher than the reported amounts of other conventional edible oils. Furthermore, by incorporation of UHO into RSO, as compared with TBHQ, a better protection of naturally occurring antioxidants (tocopherols and sterols) was found after adding UHO to RSO. This fact was mainly attributed to the UHO's tocotrienol fraction. Hence, the USM of KHO can be used as a potent antioxidant to improve the oxidative stability of frying oils.     

Synthesis and Biological Evaluation of N‐Substituted Sophocarpinic Acid Derivatives as Coxsackievirus B3 Inhibitors

A series of novel N‐substituted sophocarpinic acid derivatives was designed, synthesized, and evaluated for their anti‐enteroviral activities against coxsackievirus type B3 (CVB3) and coxsackievirus type B6 (CVB6) in Vero cells. Structure–activity relationship analysis revealed that the introduction of a benzenesulfonyl moiety on the 12‐nitrogen atom in (E)‐β,γ‐sophocarpinic acid might significantly enhance anti‐CVB3 activity. Among the derivatives, (E)‐12‐N‐(m‐cyanobenzenesulfonyl)‐β,γ‐sophocarpinic acid ( 11 m ), possessing a meta‐cyanobenzenesulfonyl group, exhibited potent activity against CVB3 with a selectivity index (SI) of 107. Furthermore, compound 11 m also showed a good oral pharmacokinetic profile, with an AUC value of 7.29 μM h^?1 in rats, and good safety through the oral route in mice, with an LD₅₀ value of >1000 mg kg^?1; these values suggest a druggable characteristic. Therefore, compound 11 m was selected for further investigation as a promising CVB3 inhibitor. We consider (E)‐β,γ‐N‐(benzenesulfonyl)sophocarpinic acids to be a novel class of anti‐CVB3 agents.     

Synthesis and antitumour activity of medium molecular weight phthalimide polymers of camptothecin

Attachment of anticancer agents to polymers has been demonstrated to improve their therapeutic profiles. A new monomer containing camptothecin, 5‐norbonene‐endo‐2,3‐dicarboxylimidoundecanoyl‐camptothecin (NDUCPT) and its homopolymer and copolymer with acrylic acid (AA) were synthesized and spectroscopically characterized. The NDUCPT content in poly(NDUCPT‐co‐AA) obtained by elemental analysis was 51%. The average molecular weights of the polymers determined by gel permeation chromatography were as follows: M_n = 12 100, M_w = 23 400 g mol^?1, M_w/M_n = 1.93 for poly(NDUCPT), M_n = 15 400, M_w = 28 300 g mol^?1, M_w/M_n = 1.83 for poly(NDUCPT‐co‐AA). The IC₅₀ value of NDUCPT and its polymers against U937 cancer cells was larger than that of CPT. The in vivo antitumour activity of all polymers in Balb/C mice bearing the sarcoma 180 tumour cell line was greater than that of CPT at a dose of 100 mg kg^?1. Copyright © 2003 Society of Chemical Industry     

Biodistribution and photodynamic efficacy of a water-soluble, stable, halogenated bacteriochlorin against melanoma

The in vitro phototoxicity of a photostable, synthetic, water‐soluble, halogenated bacteriochlorin, 5,10,15,20‐tetrakis(2‐chloro‐5‐sulfophenyl)bacteriochlorin (TCPBSO₃H), toward mouse melanoma (S91) cells is ～60‐fold higher than that of the analogous porphyrin, and is associated with very weak toxicity in the dark; 90 % of S91 cells were killed in response to a light dose of 0.26 J cm^?2 in the presence of [TCPBSO₃H]=5 μM . In vivo toxicity toward DBA mice is very low, even at doses of 20 mg kg^?1. In vivo pharmacokinetics and biodistribution of TCPBSO₃H were studied in DBA mice with S91 tumors; 24 h after intraperitoneal injection of 10 mg kg^?1, TCPBSO₃H demonstrated preferential accumulation in S91 mouse melanoma, with tumor‐to‐normal tissue ratios of 3 and 5 for muscle and skin, respectively. Photodynamic therapy (PDT) performed under these conditions, with 90 mW cm^?2 diode laser irradiation at λ 750 nm for 20 min (total light dose of 108 J cm^?2), resulted in tumor regression. Tumor recurrence was observed only approximately two months after treatment, confirming the efficacy of this PDT against melanoma.     

Synthesis and proton conductivity studies of methacrylate/methacrylamide‐based azole functional novel polymer electrolytes

Anhydrous polymer electrolytes based on azole functional methacrylates and methacrylamides have been produced for use in proton exchange membrane fuel cells (PEMFCs). Poly(methacryloyl chloride) (PMAC) was prepared first by free‐radical polymerization of methacryloyl chloride, followed by side chain functionalization with 5‐aminotetrazole (ATet), 3‐amino‐1,2,4‐triazole (ATri) and 1H‐1,2,4‐triazole (Tri). Finally, the obtained polymers were doped with triflic acid (TA) at stoichometric ratios of 1.0, 2.0 and 4.0 with respect to azole units, and the anhydrous polymer electrolytes were obtained. The membranes were characterized by FT‐IR, ¹³C‐NMR, and elemental analysis. Thermal behaviour of polymers was explored by TGA and DSC. The samples were thermally stable up to approximately 200 ^oC. Proton conductivity was measured by impedance spectroscopy. Trifilic acid doped poly(methacryloyl aminotetrazole) (PMAATet‐(TA)₄), poly(methacryloyl‐3‐amino‐1,2,4‐triazole) (PMA‐Tri‐(TA)₄), and poly(methacryloyl‐1,2,4‐triazole) (PMA‐ATri‐(TA)₄) showed maximum proton conductivities of 0.01 Scm^?1, 0.02 Scm^?1 and 8.7x10^?4 Scm^?1, respectively, at 150^°C and anhydrous conditions. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39915.     

Toxicity of three F‐substituent aromatics in anaerobic systems

BACKGROUND: The commercial use of organofluorine compounds has dramatically increased over the past few years. However, little information has been reported on the potential toxicity of organofluorine compounds to anaerobic digestion processes. In this work, the effects of 4‐fluorophenol (p‐FP), 4‐fluorobenzoic acid (p‐FB) and 4‐fluoroaniline (p‐FA) on methanogenesis and biodegradability were evaluated using sucrose‐fed systems. RESULTS: The anaerobic biodegradation of three test compounds was not observed in the study. Adsorption of p‐FP, p‐FB and p‐FA to the sludge fitted the linear model well (r² > 0.94). The partition coefficient K_d was 25 L kg^?1 for p‐FP, 16 L kg^?1 for p‐FB and 26 L kg^?1 for p‐FA. Both methanogensis and hydrolysis acidification were inhibited in the presence of three test compounds. The half maximal inhibitory concentrations (IC₅₀s) of methanogenic activity were 339, 1390 and 1907 mg L^?1 for p‐FP, p‐FB and p‐FA, respectively. A significant linear correlation (R² = 0.99, P < 0.05) was obtained between the half maximal inhibitory concentrations and the most negative atomic charges of molecules (q^?) of the three F‐substituent aromatics. CONCLUSIONS: Three F‐substituent aromatics had specific effects on methanogensis, hydrolysis acidification and syntrophic cooperation in anaerobic systems. Copyright © 2012 Society of Chemical Industry     

Synthesis and biological activity of phthalimide‐based polymers containing 5‐fluorouracil

The attachment of anticancer agents to polymers is a promising approach towards reducing the toxic side‐effects and retaining the potent antitumour activity of these agents. A new tetrahydrophthalimido monomer containing 5‐fluorouracil (ETPFU) and its homopolymer and copolymers with acrylic acid (AA) and with vinyl acetate (VAc) have been synthesized and spectroscopically characterized. The ETPFU contents in poly(ETPFU‐co‐AA) and poly(ETPFU‐co‐VAc) obtained by elemental analysis were 21 mol% and 20 mol%, respectively. The average molecular weights of the polymers determined by gel permeation chromatography were as follows: M_n = 8900 g mol^?1, M_w = 13 300 g mol^?1, M_w/M_n = 1.5 for poly(ETPFU); M_n = 13 500 g mol^?1, M_w = 16 600 g mol^?1, M_w/M_n = 1.2 for poly(ETPFU‐co‐AA); M_n = 8300 g mol^?1, M_w = 11 600 g mol^?1, M_w/M_n = 1.4 poly(ETPFU‐co‐VAc). The in vitro cytotoxicity of the compounds against FM3A and U937 cancer cell lines increased in the following order: ETPFU > 5‐FU > poly(ETPFU) > poly(ETPFU‐co‐AA) > poly(ETPFU‐co‐VAc). The in vivo antitumour activities of all the polymers in Balb/C mice bearing the sarcoma 180 tumour cell line were greater than those of 5‐FU and monomer at the highest dose (800 mg kg^?1). © 2002 Society of Chemical Industry     

New huprine derivatives functionalized at position 9 as highly potent acetylcholinesterase inhibitors

A series of 24 huprine derivatives diversely functionalized at position 9 have been synthesized and evaluated for their inhibitory activity against human recombinant acetylcholinesterase (AChE). These derivatives were prepared in one to five steps from huprine 1 bearing an ester function at position 9. Ten analogues ( 1 , 2 , 6 – 9 , 13 – 15 , and 23 ) are active in the low nanomolar range (IC₅₀ <5 nM ), very close to the parent compound huprine X. Compounds 2 , 6 , and 7 show a very good selectivity for AChE, with AChE inhibitory activities 700–1160‐fold higher than those for butyrylcholinesterase (BChE). The inhibitory potency of these compounds decreases with the steric bulk of the substituents at position 9. According to docking simulations, small substituents fit into the acyl‐binding pocket, whereas the larger ones stick out of the active site gorge of AChE. Determination of the kinetic parameters of three of the most potent huprines ( 2 , 6 , and 7 ) showed that most of the difference in K_D is accounted by a decrease in k_on, which is correlated to the increase of the substituent size. A first in vivo evaluation has been performed in mice for the most active compound 2 (IC₅₀=1.1 nM ) and showed a rather weak toxicity (LD₅₀=40 mg kg^?1) and an ability to cross the blood–brain barrier with doses above 15 mg kg^?1.     

The Versatile 2‐Substituted Imidazoline Nucleus as a Structural Motif of Ligands Directed to the Serotonin 5‐HT1A Receptor

The involvement of the serotonin 5‐HT_1A receptor (5‐HT_1A‐R) in the antidepressant effect of allyphenyline and its analogues indicates that ligands bearing the 2‐substituted imidazoline nucleus as a structural motif interact with 5‐HT_1A‐R. Therefore, we examined the 5‐HT_1A‐R profile of several imidazoline molecules endowed with a common scaffold consisting of an aromatic moiety linked to the 2‐position of an imidazoline nucleus by a biatomic bridge. Our aim was to discover other ligands targeting 5‐HT_1A‐R and to identify the structural features favoring 5‐HT_1A‐R interaction. Structure–activity relationships, supported by modeling studies, suggested that some structural cliché such as a polar function and a methyl group in the bridge, as well as proper steric hindrance in the aromatic area of the above scaffold, favored 5‐HT_1A‐R recognition and activation. We also highlighted the potent antidepressant‐like effect (mouse forced swimming test) of (S)‐(+)‐ 19 [(S)‐(+)‐naphtyline] at very low dose (0.01 mg kg^?1). This effect was clearly mediated by 5‐HT_1A, as it was significantly reduced by pretreatment with the 5‐HT_1A antagonist WAY100635.     

Synthesis and characterization of poly[(1‐vinyl‐1,2,4‐triazole)‐co‐(monomer with carboxylic acid group(s))] and determination of monomer reactivity ratios: I. Acrylic acid

Copolymers of 1‐vinyl‐1,2,4‐triazole (VTAz) and acrylic acid (AA) having different mole ratios were synthesized using free radical‐initiated solution polymerization in dimethylformamide at 70 °C with α,α′‐azobisisobutyronitrile as initiator in nitrogen atmosphere. The compositions of the synthesized copolymers for a wide range of monomer feeds were determined using Fourier transform infrared (FTIR) spectroscopy through recorded absorption bands for VTAz (1510 cm^?1, C?N (triazole ring) stretching mode) and AA (1710 cm^?1, C?O stretching mode) units. The structures of the copolymers were characterized using FTIR and ¹H NMR spectroscopy. The copolymer compositions were also determined from ¹H NMR analysis following proton signals of carboxyl group at 11.8–12.5 ppm of AA and of triazole ring at 7.5–8.1 ppm of VTAz. Monomer reactivity ratios for the VTAz‐AA pair were estimated using linear methods, i.e. Fineman–Ross (FR) and Kelen–Tüdös (KT). From FTIR evaluation, monomer reactivity ratios were calculated as r₁ = 0.404 and r₂ = 1.496 using the FR method and r₁ = 0.418 and r₂ = 1.559 using the KT method. These values were found to be very close to those obtained from NMR evaluation. The two cases r₁r₂ < 1 and r₁ < r₂ indicated the random distribution of the monomers in the final copolymers and the presence of a greater amount of AA units in the copolymer than in the feed, respectively. The observed relatively high activity of complexed growing radical‐AA^? … VTAz was explained by the effect of complex formation between carbonyl groups and triazole fragments in chain growth reactions. Thermal behaviours of copolymers with various compositions were investigated using thermogravimetric and differential scanning calorimetric analyses. It was observed that thermal stabilities and glass transition temperatures of the copolymers increased resulting from complex formation between acid and triazole units. © 2012 Society of Chemical Industry     

Feasibility studies on in‐situ biological treatment of drilling muds at an abandoned site in Sicily

The ongoing production and bioaccumulation of drilling fluids and muds has resulted in an increased concern for reducing the environmental impact of contaminated sites. The use of bioremediation as a treatment option is an important focus of research. Objectives of this study were: (i) to assess initial toxicity of drilling mud from an agricultural setting in Galliano, Sicily (Italy) and (ii) to develop a low intervention bioremediation approach to ensure that US and international soil/ground water quality standards have been met. Total petroleum hydrocarbon content of the drilling mud was reduced to 617.0 ± 176.0, 446.0 ± 195.0, and 533.0 ± 138.0 mg kg^?1, respectively, from 5000.0 ± 530.0 mg kg^?1 after treatment via conventional ex‐situ soil slurry reactor mixing (84.2–95% reduction). Using an in‐situ approach with bioreactors placed vertically into the zone of contamination, hydrocarbon concentrations went from 217.12 ± 43.38 and 149.68 ± 45.51 mg kg^?1 to 15.16 ± 3.35 and 34.27 ± 15.86 mg kg^?1 for control test beds (85.1 ± 11.2% reduction), and from 89.20 ± 67.42, 141.71 ± 64.80, and 197.87 ± 77.38 mg kg^?1 to 5.24 ± 6.15, 15.02 ± 10.20, and 9.65 ± 9.37 mg kg^?1 for experimental test beds (92.9 ± 3.0% reduction), respectively. Cadmium (Cd) and Selenium (Se) had exceeded Italian and state soil leachability standards (0.005 mg dm^?3 Cd) and (0.010, 0.050 mg dm^?3 Se), at the conclusion of the study. In‐situ treatment of drilling mud provided a framework for monitoring the fate of organic and residual metals toxicity in soils. Copyright © 2003 Society of Chemical Industry     

Rate of ammonia oxidation in a synthetic saline wastewater by a nitrifying mixed‐culture

Most of the kinetic studies on nitrification have been performed in diluted salts medium. In this work, the ammonia oxidation rate (AOR) was determined by respirometry at different ammonia (0.01 and 33.5 mg N‐NH₃ L^?1), nitrite (0–450 mg N‐NO₂^? L^?1) and nitrate (0 and 275 mg N‐NO₃^? L^?1) concentrations in a saline medium at 30 °C and pH 7.5. Sodium azide was used to uncouple the ammonia and nitrite oxidation, so as to measure independently the AOR. It was determined that ammonia causes substrate inhibition and that nitrite and nitrate exhibit product inhibition upon the AOR. The effects of ammonia, nitrite and nitrate were represented by the Andrews equation (maximal ammonia oxidation rate, r_AOMAX, = 43.2 [mg N‐NH₃ (g VSS_AO h)^?1]; half saturation constant, K_SAO, = 0.11 mg N‐NH₃ L^?1; inhibition constant K_IAO, = 7.65 mg N‐NH₃ L^?1), by the non‐competitive inhibition model (inhibition constant, K_INI, = 176 mg N‐NO₂^? L^?1) and by the partially competitive inhibition model (inhibition constant, K_INA, = 3.3 mg N‐NO₃^? L^?1; α factor = 0.24), respectively. The r_AOMAX value is smaller, and the K_SAO value larger, than the values reported in diluted salts medium; the K_IAO value is comparable to those reported. Process simulations with the kinetic model in batch nitrifying reactors showed that the inhibitory effects of nitrite and nitrate are significant for initial ammonia concentrations larger than 100 mg N‐NH₄⁺ L^?1. Copyright © 2005 Society of Chemical Industry     

Bioleaching of acid‐consuming low‐grade nickel ore with elemental sulfur addition and subsequent acid generation

The bioleaching of a nickel concentrate and an acid‐consuming nickel ore was studied using a co‐culture of Acidithiobacillus ferrooxidans and A. thiooxidans, as well as a thermophilic enrichment culture, VS2. The VS2 was dominated by a Sulfolobus species related to Sulfolobus metallicus. Nickel concentrate was readily solubilized with A. ferrooxidans and the VS2, resulting in nickel yields of 56% and 100%, respectively. Low‐grade nickel ore required 350 g H₂SO₄ kg^?1 ore for maintaining the pH of the leaching solution below 3. To overcome the high acid demand, biological elemental sulfur oxidation was combined with the ore leaching. Leaching of a 2% (wt/vol) nickel ore with a co‐culture of A. thiooxidans and A. ferrooxidans resulted in nickel yield of up to 86% with acid supplementation of 290 g H₂SO₄ kg^?1 ore. When coupled with biological sulfur oxidation, an 86% nickel recovery was achieved with 0.5% (wt/vol) ore concentration without further sulfuric acid addition. The VS2 oxidized sulfur at a rate of 0.063 g L^?1 d^?1 and the simultaneous nickel ore leaching resulted in 100% nickel yield. In summary, the potential of using elemental sulfur addition and subsequent biological acid generation to maintain the low pH during bioleaching of an acid‐consuming nickel ore was demonstrated. Copyright © 2005 Society of Chemical Industry     

Electrochemical and mARC‐Catalyzed Enzymatic Reduction of para‐Substituted Benzamidoximes: Consequences for the Prodrug Concept “Amidoximes instead of Amidines”

The mitochondrial amidoxime reducing component (mARC) activates amidoxime prodrugs by reduction to the corresponding amidine drugs. This study analyzes relationships between the chemical structure of the prodrug and its metabolic activation and compares its enzyme‐mediated vs. electrochemical reduction. The enzyme kinetic parameters K_M and V_max for the N‐reduction of ten para‐substituted derivatives of the model compound benzamidoxime were determined by incubation with recombinant proteins and subcellular fractions from pig liver followed by quantification of the metabolites by HPLC. A clear influence of the substituents at position 4 on the chemical properties of the amidoxime function was confirmed by correlation analyses of ¹H NMR chemical shifts and the redox potentials of the 4‐substituted benzamidoximes with Hammett’s σ. However, no clear relationship between the kinetic parameters for the enzymatic reduction and Hammett’s σ or the lipophilicity could be found. It is thus concluded that these properties as well as the redox potential of the amidoxime can be largely ignored during the development of new amidoxime prodrugs, at least regarding prodrug activation.     

Mineral Oil Hydrocarbons (MOSH/MOAH) in Edible Oils and Possible Minimization by Deodorization Through the Example of Cocoa Butter

Mineral oil hydrocarbons (MOH) are present in many fats and oils as well as foods prepared thereof. A survey of mineral oil saturated hydrocarbons (MOSH) and mineral oil aromatic hydrocarbons (MOAH) in different types of vegetable fats and oils is reported. Contents of MOSH/MOAH were quantified using liquid chromatography online‐coupled to gas chromatography with flame‐ionization detection (LC‐GC‐FID). Cocoa butter (n = 142) showed levels from <LOQ (2.5 mg kg^?1) to 162 mg kg^?1 ΣMOSH (sum of C10–C50) and <LOQ to 55 mg kg^?1 ΣMOAH, in palm oil (n = 21) ΣMOSH were quantified from <LOQ to 124 mg kg^?1 and ΣMOAH from <LOQ to 39 mg kg^?1. Sunflower oil showed lower levels: ΣMOSH were determined in the range of <LOQ to 17 mg kg^?1 and MOAH were not observed at all. A possible influence of deodorization and a subsequent minimization of MOSH/MOAH was investigated. Systematic model‐experiments were performed on laboratory scale using spiked cocoa butter. Significant minimization of volatile MOH subfractions ≤C24 were observed at a deodorization temperature of 210 °C. Deodorization can be considered as an important processing step to reduce or even remove volatile MOSH/MOAH ≤C24. Practical Applications: Regardless of their possible entry routes into the food chain, volatile fractions of MOSH/MOAH can be removed by deodorizing vegetable fats and oils. This model‐study identifies the temperatures of deodorization that provide a significant improvement toward minimization of undesired MOSH/MOAH.     

Bicyclic Derivatives of the Potent Dual Aromatase–Steroid Sulfatase Inhibitor 2‐Bromo‐4‐{[(4‐cyanophenyl)(4H‐1,2,4‐triazol‐4‐yl)amino]methyl}phenylsulfamate: Synthesis,SAR, Crystal Structure,and in vitro and in vivo Activities

The design and synthesis of a series of bicyclic ring containing dual aromatase–sulfatase inhibitors (DASIs) based on the aromatase inhibitor (AI) 4‐[(4‐bromobenzyl)(4H‐1,2,4‐triazol‐4‐yl)amino]benzonitrile are reported. Biological evaluation with JEG‐3 cells revealed structure–activity relationships. The X‐ray crystal structure of sulfamate 23 was determined, and selected compounds were docked into the aromatase and steroid sulfatase (STS) crystal structures. In the sulfamate‐containing series, compounds containing a naphthalene ring are both the most potent AI ( 39 , IC_{50 AROM}=0.25 nM ) and the best STS inhibitor ( 31 , IC_{50 STS}=26 nM ). The most promising DASI is 39 (IC_{50 AROM}=0.25 nM , IC_{50 STS}=205 nM ), and this was evaluated orally in vivo at 10 mg kg^?1, showing potent inhibition of aromatase (93 %) and STS (93 %) after 3 h. Potent aromatase and STS inhibition can thus be achieved with a DASI containing a bicyclic ring system; development of such a DASI could provide an attractive new option for the treatment of hormone‐dependent breast cancer.     

Effect of a chemical synthesis‐based pharmaceutical wastewater on performance,acetoclastic methanogenic activity and microbial population in an upflow anaerobic filter

The performance of an upflow anaerobic filter (UAF) treating a chemical synthesis‐based pharmaceutical wastewater was evaluated under various operating conditions. During start‐up, the UAF was initially fed by glucose till an organic loading rate (OLR) of approximately 7.5 kg COD m^?3 day^?1 with a hydraulic retention time of 2.3 days. A soluble COD removal efficiency of 98% was achieved before the addition of the wastewater. Initially, the filter inertia was acclimatized to the wastewater by sequential feeding of 10% (w/v), 30% (w/v) and 70% (w/v) of the pre‐aerated wastewater mixed with glucose followed by a 100% (w/v) pre‐aerated wastewater. During the operation, the COD removal efficiency and methane yield decreased to 75% and 0.30 m³ CH₄ kg^?1 COD_removed respectively. As the UAF became accustomed to the pre‐aerated wastewater, raw wastewater was fed in increasing ratios of 20% (w/v), 60% (w/v) and 80% (w/v) with the pre‐aerated wastewater as the remaining part. During this stage of the operation, a COD removal efficiency in a range of 77–86% was achieved and the methane yield decreased to 0.24 m³ CH₄ kg^?1 COD_removed. Finally, 100% (w/v) raw wastewater was fed and a COD removal efficiency of 65% was achieved with a methane yield of 0.20 m³ CH₄ kg^?1 COD_removed. At the end of the operation, acetoclastic methanogenic activity was only measured in the bottom section of the UAF, this showed a 90% reduction in comparison with activity of inoculation sludge. Microscopic examinations revealed that rod‐shaped methanogens remained as the dominant species whereas Methanosarcina‐like species and filaments were present only in insignificant numbers along the UAF. © 2002 Society of Chemical Industry     

Batch treatment of saline wastewater by Halanaerobium lacusrosei in an anaerobic packed bed reactor

BACKGROUND: This study considers batch treatment of saline wastewater in an upflow anaerobic packed bed reactor by salt tolerant anaerobic organisms Halanaerobium lacusrosei . RESULTS: The effects of initial chemical oxygen demand (COD) concentration (COD₀ = 1880–9570 mg L^?1), salt concentration ([NaCl] = 30–100 g L^?1) and liquid upflow velocity (V_up = 1.0–8.5 m h^?1) on COD removal from salt (NaCl)‐containing synthetic wastewater were investigated. The results indicated that initial COD concentration significantly affects the effluent COD concentration and removal efficiency. COD removal was around 87% at about COD₀ = 1880 mg L^?1, and efficiency decreased to 43% on increasing COD₀ to 9570 mg L^?1 at 20 g L^?1 salt concentration. COD removal was in the range 50–60% for [NaCl] = 30–60 g L^?1 at COD₀ = 5200 ± .100 mg L^?1. However, removal efficiency dropped to 10% when salt concentration was increased to 100 g L^?1. Increasing liquid upflow velocity from V_up = 1.0 m h^?1 to 8.5 m h^?1 provided a substantial improvement in COD removal. COD concentration decreased from 4343 mg L^?1 to 321 mg L^?1 at V_up = 8.5 m h^?1, resulting in over 92% COD removal at 30 g L^?1 salt‐containing synthetic wastewater. CONCLUSION: The experimental results showed that anaerobic treatment of saline wastewater is possible and could result in efficient COD removal by the utilization of halophilic anaerobic bacteria. Copyright © 2008 Society of Chemical Industry