Synthesis of glycidylethylhexylphthalate and its effects on poly(vinyl chloride) films as a novel plasticizer

To improve the processability and prevent the thermal degradation of poly(vinyl chloride) (PVC), various plasticizers and heat stabilizers have to be compounded. Phthalic plasticizers and metal soap stabilizers are usually used with epoxides as costabilizers. Epoxidized soybean oil (ESO), is one of the most commonly used epoxides because of its typical combined roles as a plasticizer and heat stabilizer in PVC compounds. ESO, however, sometimes causes surface contamination of PVC compounds because saturated fatty acids such as stearic and palmitic acids in soybean oil easily bleed onto the surface. In addition, some ingredients in ESO with hydroxide groups and unreacted double bonds during epoxidization also tend to increase the bleeding of ESO. This is due to their low compatibility with PVC resins. In this study, a novel plasticizer of PVC resins, glycidylethylhexylphthalate (GEHP), was synthesized, and its performance was evaluated. GEHP was designed to act as a plasticizer like normal phthalic plasticizers and to act as a heat stabilizer like ESO. Through the addition of epoxy groups in phthalic compounds, the resistance to bleeding was improved, and the plasticizing and heat‐stabilizing effects on the PVC compounds were preserved. Soft PVC films were prepared with GEHP. The mechanical properties, thermal stability, and bleeding properties of the films were investigated. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 1347–1356, 2005     

Synthesis and application of a novel cardanol‐based plasticizer as secondary or main plasticizer for poly(vinyl chloride)

A novel plasticizer based on cardanol, hydrogenated cardanol glycidyl ether acetic ester containing phosphaphenanthrene group (HCGEP), was prepared and incorporated into poly(vinyl chloride) (PVC) for the first time. The molecular structure was characterized with Fourier transform infrared and ¹H NMR spectroscopies. The thermal degradation behavior and flame retardant performance of PVC films with HCGEP as secondary or main plasticizer were investigated using thermogravimetric analysis, combustion tests, limiting oxygen index tests and morphological analysis of residues. Furthermore, the mechanical properties of PVC films were examined based on the results of tensile testing. The results were compared to those of the petroleum‐based plasticizer dioctyl phthalate. With the substitution of dioctyl phthalate with HCGEP, PVC films exhibited high thermal stability and better flame retardant performance. The tensile test results showed that the addition of HCGEP could endow PVC resin with well‐balanced properties of flexibility, strength and hardness. © 2017 Society of Chemical Industry     

Synthesis and characterization of amphiphilic pluronic (F68)‐1,2‐dipalmitoyl‐sn‐glycero‐3‐phosphoethanolamine copolymers and their micelles as a drug carrier

A new Pluronic (F68)‐1,2‐dipalmitoyl‐sn‐glycero‐3‐phosphoethanolamine (DPPE) (Pluronic (F68)–DPPE) copolymer was synthesized with Pluronic (F68) and DPPE. The chemical structure and physical properties of copolymers were determined by FTIR, ¹H NMR, ¹³C NMR, ³¹P NMR, and TGA. Environmental scanning electron microscopy, fluorescence spectroscopy, and dynamic light scattering method confirmed the formation of copolymeric micelles of Pluronic (F68)‐DPPE. To estimate the feasibility as novel drug carriers, the copolymer micelles were prepared by the phase separation dialysis method. Amphotericin B as a lipophilic model drug was incorporated into copolymeric micelles and the drug release behavior was investigated. It was found that the chemical composition of the micelle was a key factor in controlling micelles size, drug‐loading content, and drug release behavior. As DPPE segment weight ratio increased, the micelle size and drug‐loading content increased, and the drug release rate decreased. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010