Experimental investigations on the influence of properties of Calophyllum inophyllum biodiesel on performance,combustion, and emission characteristics of a DI diesel engine

The current state of future energy and environmental crises has revitalised the need to find alternative sources of energy due to escalating oil prices and depleting oil reserves. To meet increasing energy requirements, there has been a growing interest in alternative fuels like biodiesel that can become a suitable diesel fuel substitute for compression ignition engine. Biodiesel offers a very promising alternative to diesel fuel, since they are renewable and have similar properties. Calophyllum inophyllum seed oil collected from different restaurants in the Nagapattinam region of South India was converted into methyl esters (biodiesel) by transesterification. Biodiesel produced from C. inophyllum oil was blended with diesel by different volume proportions (25%, 50%, and 75%). Biodiesel and its blends were tested on a direct injection (DI) diesel engine at a constant speed by varying loads from 0% to 100% in steps of 20% to analyse its performance, emission, and combustion characteristics. The results obtained were compared with that of diesel fuel. B25 (27.5%) showed better performance than diesel fuel (26.28%) at full load and B50 showed performances similar to diesel fuel. Smoke density of B25 was slightly (2.6%) higher than that of diesel at full load conditions. At full load, measured carbon monoxide emissions for B25 and B50 were 4% lower than that of diesel. Hydrocarbon emissions for B25 and B100 were 5.37% and 25.8% higher than that of diesel, respectively. Nitrogen oxides (NO_x) emission was lower for all biodiesel blends. NO_x emissions of B100 and B75 were lower than that of diesel by 22.16% and 13.29% at full load, respectively. Combustion profile was smoother, and no knocking problem was observed while operating with biodiesel blends. B75 produced peak cylinder pressure.     

Experimental investigation of the influence of isobutanol addition on engine performance and emissions of a direct ignition diesel engine fuelled by biodiesel blends derived from waste vegetable oil

Biodiesel has become one of the potential alternative sources to replace diesel. Some of the limitations of biodiesel include high NO _x , poor atomization, poor oxidation stability, cold-flow problems, long-term storage problems, etc. Various strategies were discussed to overcome the limitations of biodiesels. Recent research is on effects of fuel additives or fuel composition modification to reformulate the fuel properties. This article is aimed at presenting the experimental investigation of the effects of isobutanol additive on the engine performance and emission characteristics of biodiesel blends derived from waste vegetable oils. The experimental investigation was conducted on a direct injection four-stroke diesel engine with different blends, B10, B20, B30, B10 (10% ISB), B20 (10% ISB), B30 (10% ISB), B10 (20% ISB), B20 (20% ISB) and B30 (20% ISB), and engine performance and emission characteristics are evaluated and discussed.     

Performance characteristics of palm kernel biodiesel and its blend in a CI engine

The full load performance characteristics of a diesel engine fuelled with palm kernel biodiesel and its blend with diesel fuel are presented in this paper. The biodiesel was synthesised from Nigerian palm kernel oil through a direct base catalysed transesterification process using sodium hydroxide and methanol as the catalyst and alcohol, respectively. The produced biodiesel was blended with neat diesel fuel at a ratio of 20% biodiesel to 80% diesel by volume. The engine torque, brake power, brake specific fuel consumption and brake mean effective pressure were determined for each of the fuels at 400 rpm intervals between 1200 and 3600 rpm. In other to establish a baseline for comparison, the engine was first run on neat diesel. The test results interestingly revealed that the fuel blend (B20) produced higher torque at low and medium engine speeds than neat diesel fuel and unblended biodiesel (B100). This suggests that it can be a suitable fuel for heavy duty engines that are required to develop high torque at low engine speeds. It was also observed that diesel fuel developed higher torque and brake power than the unblended biodiesel (B100) at all tested speeds and showed the least brake specific fuel consumption possibly because of its higher heating value. In all, the palm kernel biodiesel and its blend (B20) exhibited performance characteristic trends very similar to that of diesel fuel thus confirming them as suitable alternative fuels for compression ignition engines.     

Performance and emission characteristics of direct injection diesel engine using linseed oil as biodiesel by varying injection timing

The depletion of fossil fuels and increasing demand leads to research in alternate fuels. The alternate fuels are bio-degradable, renewable and non-toxic. Many types of oils are re-used in biodiesel production, considering their availability, among which linseed oil is the most significant one. Injection timing plays a major role among various injection parameters which affects its performance and emission characteristics. This paper focuses on experimental investigation on a single cylinder, four-stroke direct injection diesel engine with output of 5.2?kW at 1500?rpm at various injection timings, 20, 23, 26 degree BTDC for observing the performance and emission characteristics of direct injection diesel engine using methyl esters of linseed oil and its blends. The blends are B10, B20, and fuel characteristics are observed. The results show that when compared with diesel it gives an increase in BTHE and reduction in SFC. Both the biodiesel blends give lesser NOx. Slightly higher CO and HC emission were found. The performance and emissions were increased in when injection increased.     

Performance and Emission characteristics of cotton seed and neem oil biodiesel with CeO2 additives in a single-cylinder diesel engine

Energy utilisation from renewable sources plays a vital role in meeting the demands of a clean environment. Commercialisation of biodiesel is comparatively less than that of other alternative sources due to its suitability and yield. This paper is focused on performance and emission characteristics of neem oil biodiesel and cotton seed oil biodiesel blended with cerium oxide as an additive. The blending proportion was B10, B20, B30, B40 and 100% diesel. The testing was performed in a single-cylinder diesel engine coupled with an exhaust gas analyser. The performance characteristics were obtained in between the brake power with specific fuel consumption and emission characteristics such as carbon monoxide, carbon dioxide and other gases. It was observed that the combination of B20 proportion with CeO₂ blend produces effect results with other blends in specific fuel consumption and reduced emission behaviour.     

Effect of diethyl ether blended with neem oil methyl esters in CI engine

Vegetable oils are now considered to be a potential alternative that can be used in place of partial or total substitution of diesel fuels. In this study, we used diethyl ether as an oxygenated additive to investigate the possible use of higher percentages of biodiesel in an unmodified diesel engine. Neem oil was selected for biodiesel production. The tests were performed at a steady-state condition in a single-cylinder constant speed DI diesel engine. The combustion process involved in diesel engine would be improved and the particulate matter would be reduced if these biodiesels are blended. An experimental investigation is carried out to establish the emission characteristics of a direct injection diesel engine using diethyl ether as additive in Neat Neem oil Biodiesel. Emissions of hydro carbon oxides of nitrogen and carbon monoxide significantly reduced by adding diethyl ether into neem oil biodiesel at 10% and 20% on volume basis.     

Performance and emission characteristics of biodiesel from black pepper oil

Biodiesel is considered to be an alternative energy source, which will help to decrease the effects of global greenhouse gases. The extensive use of fossil fuels has led to the depletion of petroleum resources. The gases that emerge out from the diesel engine cause a major impact on the ecological system. In this paper, black pepper oil along with nano-additives was blended with a diesel engine and its performance was analysed in direct injection diesel engine at a constant speed and at different loading conditions. At varying loading conditions, the brake thermal efficiency of biodiesel blends was found to be slightly higher than that of diesel. It is also seen that the unburnt hydrocarbons and carbon monoxide get reduced at different loads and at different blends. It was observed from the result that by using biodiesel emission of CO and HC and smoke decreased while NO_x emission increased.     

Evaporation rate and engine performance analysis of coated diesel engine using Raphanus sativus biodiesel and its diesel blends

An experimental investigation to measure the evaporation rates, PSZ-coated engine performance and emissions of radish biodiesel (Methyl Ester of radish oil) and its blends in different volumetric proportions with diesel is presented. The thermo-physical properties of all the fuel blends have been measured and presented. Evaporation rates of neat radish biodiesel, neat diesel and their bends have been measured under slow convective environment of air velocity of 0.2?m/s with a constant temperature of 200°C. Evaporation constants have been determined by using the droplet regression rate data. The neat fuels and fuel blends have been utilised in a test engine with different load conditions to evaluate the performance and emission characteristics of the fuels. From the observed evaporation, performance and emissions characteristics, it can be suggested that a blend of B25–B75 could be optimally used in coated diesel engine settings without any modifications on it.     

Effect of injection pressure on the performance and emission characteristics of CI engine using canola emulsion fuel

Biodiesel is a promising renewable alternative fuel for diesel. The need of biodiesel fuels for the diesel engines is to restrict the dependency on the fossil fuels in context to the world energy oil crisis. The objective of this article is to investigate the performance and emission characteristics of a CI engine with diesel and blends of canola biodiesel Emulsion at 200, 220 and 240?bar. The fuel injection system in a diesel engine is to achieve a high degree of atomisation for better penetration of fuel in order to utilise the full air charge and to promote the evaporation in a very short time and to achieve higher combustion efficiency. Emulsified fuels showed an improvement in brake thermal efficiency of 28.8% at 240?bar accompanied by the drastic reduction in NOx at 200?bar.     

Effect of the addition of 1-pentanol on engine performance and emission characteristics of diesel and biodiesel fuelled single cylinder diesel engine

ABSTRACT

Bioalcohols have recently become one of the promising alternate fuels. Lower alcohols exhibit some problems like phase separation, stability issues, storage problems, corrosion etc. Hence, the addition of higher alcohols is regarded least-problematic and the concept of using higher alcohols as fuel blends is relatively new. In this article, the effects of the addition of higher alcohol (1-pentanol) on engine performance and emission characteristics are discussed. Two reference fuels (diesel and biodiesel derived from waste cooking oil) and two test fuels (blends of 20% of 1-pentanol and 80% of either diesel or biodiesel) are tested in a single cylinder compression ignition diesel engine for six load conditions (0, 4, 8, 12, 16, and 20?kg) at a constant speed of 1200?rpm. The engine performance and emission characteristics are determined and discussed.     

Bio-ethanol additive effect on direct injection diesel engine performance,emission and combustion characteristics – an experimental examination

ABSTRACT

The present investigation explores the effect of dairy scum oil methyl ester (DSOME) blends and ethanol additive on TV1 Kirloskar diesel engine performance, combustion and emission characteristics. From the experimental study, it is concluded that DSOME-B20 (20% dairy scum biodiesel?+?80% diesel) has shown appreciable performance and lower HC and CO emissions among all other blends. Hence DSOME-B20 is optimised as best fuel blend and it is carried for further investigations to study the effect of bio-ethanol additive on diesel engine performance. From the study it apparent that diesel engine operated with ethanol additive and 20% dairy scum biodiesel blended fuels shown the satisfactorily improved emission characteristics when compared to petroleum diesel fuel operation. Finally, from the experimental investigation, it concludes that addition of ethanol shown the slightly higher HC, CO emission and improved BTE, BSFC, NOx and CO₂ than sole B20 biodiesel blend. Among all three (3%, 6% and 9%) ethanol additive ratios, E6% (6%-ethanol with B20) ethanol additive exhibits slightly better BTE, BSFC, cylinder pressure and heat release rate hence 6% ethanol additive with B20 biodiesel blend would furnish beneficial effects in the diesel engine.     

Influence of cerium oxide additive and aloe vera biodiesel on a CI engine

Diesel is the main source of world transportation due to higher combustion efficiency, compliance, consistency and cost-economy. It is also a major contributor to the world prosperity since it is used extensively. Diesel engine’s emissions are the serious hazard to the world environment and it is measured to be the major causes of air pollution. The demand in biofuels for years created a scope for aloe vera into biodiesels. Aloe vera, having higher calorific value vnthan other plant sources used as biodiesels, enhanced us in making another alternative biodiesel, which has lesser emissions and better performance. In this research work, four biodiesel blends from aloe vera oil with cerium oxide additive are explored for their performance and emission characteristics. The results proved B30 (30% biodiesel, 68% diesel and 1% cerium oxide) gives good performance when compared to other blends.     

Experimental investigation of performance and emissions characteristics on single-cylinder direct-injection diesel engine with PSZ coating using radish biodiesel

ABSTRACT

It has been determined that world oil production is likely to level off very shortly and that alternative fuels will have to meet the demands of an increasing energy crisis. The crude oil price is continuing to increase; at the same time the need of energy is also increasing rapidly. So there is an urgent need to switch to some other fuels which could replace petrol and diesel in order to produce energy. An eco-friendly alternative is required to fulfil the growing demand. This project highlights our work on alternate fuels and the importance of choosing radish seed as one such alternative. The aim of this study is the experimental investigation of performance and emissions on a single-cylinder direct-injection diesel engine with a coating. Diesel, B25, B50, B75 and B100 are used as fuels. The engine cylinder head, valves and piston crown are coated with 100 micron of nickel-chrome-aluminium bond coat and 450 micron of partially stabilised zirconia by the atmospheric plasma spray method [Ravikumar and Senthilkumar (2013). “Reduction of NOx Emission on NiCrAl-Titanium Oxide Coated Direct Injection Diesel Engine Fuelled with Radish (Raphanus sativus) Biodiesel.” Journal of Renewable and Sustainable Energy 5 (6): 063121]. Further, by using radish biodiesel and its blends, the emission and performance characteristics are checked and a suitable blend is selected.     

Experimental investigation of performance,combustion and emission characteristics of CI engine fuelled with chicha oil biodiesel

As the decreasing availability of the fossil fuel is rising day by day, the search of alternate fuel that can be used as a substitute to the conventional fuels is rising rapidly. A new type of biofuel, chicha oil biodiesel, is introduced in this work for the purpose of fuelling diesel engine. Chicha oil was transesterified with methanol using potassium hydroxide as catalyst to obtain chicha oil methyl ester (COME). The calorific value of this biodiesel is lower, when compared to that of diesel. The COME and their blends of 20%, 40%, 60% and 80% with diesel were tested in a single cylinder, four stroke, direct injection diesel engine and the performance, combustion and emission results were compared with diesel. The test result indicates that there is a slight increase in brake thermal efficiency and decrease in brake-specific fuel consumption for all blended fuels when compared to that of diesel fuel. The use of biodiesel resulted in lower emissions of CO and HC and increased emissions of CO₂ and NO_x. The experimental results proved that the use of biodiesel (produced from chicha oil) in compression ignition engine is a viable alternative to diesel.     

Experimental investigation on the performance and emission characteristics of CI engine using waste cotton seed biodiesel with ZNO as a fuel additive

ABSTRACT

The energy crisis created by depletion of fossil fuels and the toxic emissions from the fossil fuel demands for eco-friendly potential alternative sources of energy. Even though unclean, biodiesel is found to be a potential alternative for the fossil fuels. In the present work, the emission characteristics and performance of biodiesel blend with and without ZNO additive was studied. There are four biodiesel blends studied in the first part of the research and found that the B25 combination gives a better result compared to others; therefore, this blend is tested with three proportion of ZNO additive in the second part of the research. The addition of 125?PPM of ZNO to the selected B25 blends gives a better performance, the efficiency improvement is found to be 4.2% and the emission of NO_x is by 10.3% under full load condition.     

Effect of injection pressure on the performance and emission characteristics of the CI engine using Vateria indica biodiesel

Vateria indica Linn seeds were found to contain nearly 19% of oil/fat content. This fat is converted into biodiesel by a novel method by the authors at the biodiesel preparation facility at NITK, Surathkal, India. As biodiesel is a promising alternative fuel for petro diesel in compression ignition (CI) engines, this biofuel is tested in a single-cylinder diesel engine. The objective of this work is to find combustion, performance and emission characteristics of a CI engine with diesel and blends of V. indica biodiesel at 180, 200 and 220?bar injection pressures. Blending is done in volumetric ratios of 10%, 15%, 20% and 25% of biodiesel with diesel which are called as B10, B15, B20 and B25. The idea of increasing fuel injection pressure is to promote atomisation and full penetration into the combustion chamber leading to better combustion. Blend B25 showed best thermal efficiency of the order of 33.03% and the least NO_X emission of 1047?ppm at 220?bar injection pressure at 75% load.     

Performance and emission characteristics of cashew nut shell oil on the CI engine

This article is an effort to address the need for a non-cooking oil-based biodiesel. Here, the experimental work is done on a single cylinder, direct injection CI engine using cashew nut shell oil biodiesel blends under constant speed. The cashew nut shell liquid (CNSL) biodiesel is blended with the diesel fuel and used as biodiesel blend. Blends used for testing are B20, B40 and B60. The effect of the fuels on engine power, brake thermal efficiency (BTE) and exhaust gas temperature was determined by performance tests. The influences of blends on CO, CO₂, HC and NO_x emissions were investigated by emission tests. The BTE values of biodiesel are closer to diesel. Compared to diesel, all the biodiesel blends gave lesser unburnt hydrocarbon (HC), carbon monoxide (CO) and smoke emissions. Slightly higher NO_x emissions were found in CNSL biodiesel blends, which is typical of the other biodiesels.     

Study on the outcome of a cetane improver on the emission characteristics of a diesel engine

ABSTRACT

Dimethyl carbonate (DMC), a cetane improver, is used as a fuel additive to investigate the exhaust emission in diesel engine. Neem oil biodiesel (B100), neem oil biodiesel + dimethyl carbonate (B100+DMC) and diesel were used as test fuels. DMC is added 0.5% by volume to biodiesel. This research work was executed in a four-stroke, single-cylinder diesel engine. Owing to the percentage of DMC in biodiesel, carbon monoxide (CO) and hydrocarbon (HC) emissions were dropped corresponding to diesel. A considerable amount of nitrogen oxide (NO_x) is decreased when diesel is used, and by the addition of B100+DMC, NO_x were slightly reduced compared to B100.     

Performance and emission characteristics of biodiesel derived from coconut acid oil

ABSTRACT

In order to maintain economic development and reduce global warming and prices of the oil, there is an increase in the research and development of alternate energy resources. Normally, the vehicles running in pure diesel is found to produce more emission than biodiesel-blended engine vehicles. So, we used coconut acid oil, which can reduce the emission. In this paper, coconut acid oil blended with diesel in various proportions such as B5 (5% biodiesel, 95% diesel), B10 and B20 have been used at different load conditions in 4-strokes single-cylinder diesel engine mounted on an eddy current dynamometer bed. Physical properties of coconut acid oil such as density, viscosity and calorific value have been determined before engine testing. Hence, suitable blends are selected for blending with coconut acid oil in the diesel engine. The overall performance increase with the biodiesel blends is about 0.93% and emission has decreased by about 3.47%.     

A characteristic evaluation of alumina–zirconia-coated engine fuelled with punnai methyl ester

All these years, several studies have been carried out to find feasible, viable and dominant alternate source to fossil fuels, with the primary interest of enhancing engine performance and reducing exhaust tail pipe emissions. The present work enumerates the performance and emission characteristics of low-heat rejection engine (LHRE) coated with the alumina–zirconia (Al₂O₃–ZrO₂) composite. Experimental results proved improvement in brake thermal efficiency, brake-specific fuel consumption and well-to-wheel reduction of carbon monoxide, hydrocarbon and smoke emission for coated engine (CE) in comparison with uncoated engine (UCE). Neat diesel, new high-potential punnai methyl ester and its diesel blends were used as test fuels. However, in the experimental study, oxides of nitrogen increased for CE than UCE.