基于SOPC技术的EAST定时与同步系统

定时与同步系统是托卡马克装置实现等离子体放电流程实时控制的基础。基于SOPC技术研制的EAST分布式定时与同步系统可为各子系统提供精确时钟和同步触发信号,使装置各子系统按照预先设定好的流程运行,实现EAST等离子体放电实验时序的精确控制。EAST定时与同步系统的时序精度高于1μs,可以满足当前EAST实验的需要。     

EAST低温系统主运行模式的控制流程设计与分析

EAST托卡马克核聚变实验装置是世界上从事核聚变研究的先进科学设备。EAST低温系统是该装置的主要子系统之一,其相应DCS控制系统具有很高的稳定性和可扩展性,各部分的控制相互独立、并行执行。本文详细介绍和分析了EAST低温控制系统及在正常降温、稳态和失超模式下的控制流程设计。     

MDSplus与EAST数据服务系统之间的中间件设计

介绍了聚变实验数据采集与管理软件包MDSplus与基于LZO压缩算法的数据服务系统之间的中间件的设计思路与实现方法.该中间件解决了数据双份不同格式存贮的难题,已成功地应用于中科院等离子体物理研究所的EAST装置,使得熟悉MDSplus接口的用户不需知道任何LZO和文件系统的知识就可以透明地访问EAST实验数据,为建立虚拟合作实验室奠定了的基础.     

EAST托卡马克中央定时系统的实现

中央定时系统是EAST托卡马克装置总控系统的重要组成部分,是总控系统对各子系统进行时序和触发控制的基础.本工作建立的EAST中央定时系统采用分布式的系统结构,可对32 MHz的系统时钟信号进行0-65535的任意整数分频;能对系统触发进行延迟输出,最大的延迟时间为4294s、延迟的分辨率为1 μs.该系统性能稳定,并已成功地投入到2006年9月EAST托卡马克装置的首轮正式物理放电实验中.     

EAST安全巡检与联锁保护系统设计与实现

全超导托卡马克系统不同于常规托卡马克系统,有独特的运行特性和更高的运行风险.安全巡检与联锁保护系统是托卡马克系统中必不可少的-个重要组成部分.EAST (Experimental Advanced Superconducting Tokamak)是我国自主研发的世界上第-个全超导托卡马克系统.本文详细分析了EAST的主要运行风险,针对运行风险制定的各子系统的安全监测和保护机制,及分布式 EAST 安全巡检与联锁保护系统的系统体系结构和系统的实现.EAST 已在中国科学院等离子体物理研究所建成并于2006年9月运行成功,获得等离子体,本系统已在EAST装置的2006-2007年度的几轮实验中成功应用.     

EAST托卡马克装置的核辐射监测系统

EAST(Experimental Advanced Superconducting Tokamak)现阶段D-D运行产生2.45 Me V聚变中子及次级核反应γ射线,为了解EAST运行期间辐射场的分布及强度,确保运行期间人员及环境的核辐射安全。针对EAST运行期间装置大厅内部存在较强的中子、伽马瞬变辐射场的特征,结合环境低本底辐射监测的需要,采用宽动态范围、快时间响应的场所辐射监测探测器,与高灵敏度、稳定性好的环境辐射监测探测器相结合的方式,围绕EAST装置布置13个辐射监测点,每点分别安装一台中子、伽马监测器。采用自行编写的Lab VIEW辐射监测软件进行数据采集,组建了一套EAST托卡马克装置的中子、伽马辐射剂量监测系统。该系统在2015年春季EAST实验中连续稳定运行了三个月,可靠性较高,获取了大量实验数据。监测系统满足EAST核辐射监测的要求,同时为后续开展聚变堆辐射安全与防护研究提供实验平台。     

EAST托卡马克激光吹气杂质注入系统控制系统设计及测试

开展托卡马克等离子体中杂质输运与杂质控制研究对于提升等离子体约束性能与保障装置安全有重要意义。为了在EAST(Experimental Advanced Superconducting Tokamak)托卡马克装置上开展杂质输运研究,需要发展一套用于注入示踪杂质粒子的激光吹气（Laser Blow-off,LBO）微量杂质注入系统。本文描述了一种用于EAST托卡马克装置上LBO系统的控制系统设计过程与测试结果。该系统采用了全新的自动控制流程,使得系统可以重复、定量地向EAST等离子体注入不同元素的示踪杂质粒子。该设计通过STM32单片机系统实现对聚焦透镜位移、激光器被触发时刻的准确控制,且激光光斑直径可调,以改变杂质注入量。测试结果显示,系统能快速检测到外触发信号并实现精确定时,激光光斑聚焦位置误差小于0.40 mm,达到激光吹气杂质注入实验要求。本研究对在EAST装置上开展等离子体杂质输运研究具有重要意义。     

EAST托卡马克新型积分器系统控制器的研制

为了满足EAST托卡马克的实验需求,提升积分器系统的可维护性和可测试性,研制了新型积分器系统控制器。该控制器采用ARM微控制器和轻量级IP协议栈,实现了积分器系统的网络化控制。所提供的参数设置指令可远程设置和读取积分器板卡上放大器的放大倍数,而控制指令则提供了初始化、标准信号积分、脉冲积分、积分保持、标定和探针测试功能。经实验和EAST现场测试,该积分器系统控制器可满足EAST装置的实验要求。     

金属膜电阻型辐射热探测器在EAST上的应用

介绍了托卡马克实验装置(EAST)上用于绝对测量辐射功率的金属膜电阻探测器测量系统。金属膜电阻型探测器采用经典的惠斯通电桥电路结构,结合正弦波激励的载频信号放大技术,该系统实现了对强电磁干扰环境下微弱信号的测量。EAST上的辐射功率测量系统为48路测量阵列,用于测量等离子体放电过程中辐射功率的时空演化。文中给出了对探测器进行绝对标定的结果和典型的测量结果。     

EAST-LHCD4.6G频率源的研制

EAST超导托卡马克是我国开展受控核聚变研究的新一代实验装置,低杂波电流驱动系统(LHCD)是在该装置中维持长脉冲等离子体和改善其等离子体约束的重要手段之一.LHCD要求一台低相位噪声、高稳定度的频率源.使用锁相环技术,通过良好的方案设计和合理的电路布局,研制了一台4.6G频率源,作为该系统微波驱动电路的信号源.     

Sorption methods of separating barium and radium,aluminum and gallum,and zirconium and hafnium

Chromatographic methods of separating elements with very similar properties have now been developed. However, a number of these methods are difficult to use industrially as their throughput is low. The efficiency of chromatographic separation methods could be increased considerably by using appropriate complex formers, which decrease the effective concentration of the ions being separated, and,in the first approximation, this is equivalent to a decrease in the amount of elements being separated. The difference in the formation constants of the complex compounds increases the separation coefficient. By investigating chromatographic separation with the use of various complex formers, we found the optimal conditions for separating barium and radium, zirconium and hafnium, and aluminum and gallium. The throughput of these methods, with respect to the macroelement was 15–60 kg/hr per m² of column cross section.     

医源性电离辐射损伤及其生物医学防护

随着核与辐射技术在医学检查、诊断和治疗领域运用的增加,世界范围受照人群不断增多,医源性辐射已成为人类最主要的人工辐射来源之一。医疗机构和个人在选择利用放射手段获取诊断和治疗利益的同时,需要注意和防护伴随的辐射损伤效应。本文介绍了医源性辐射及其危害、机体组织的辐射损伤特性和类型、辐射生物效应分子及效应调节研究的进展,简要概述目前临床已经使用或最具应用潜力的辐射防护策略。     

Distribution and Fixation of Cesium and Strontium in Zeolite A and Chabazite

The selective removal and fixation of Cs and Sr have been studied in zeolite A and chabazite. Cesium ion was preferentially distributed into chabazite with a high distribution coefficient (K _Cs>10³ cm³·g^?1) in the presence of NaCl (10^?1 mol·dm^?3). The K _Sr values for zeolite A attained about 10³ cm³·g^?1 in the pH range of 8～10, and they gradually decreased with an decrease in pH.

The initial rate of Cs adsorption was fairly fast in chabazite, and the adsorption ratio reached almost 100% within a few hours. The adsorption ratio of Sr in binderless A zeolite reached almost 100% after 15 h. The adsorption of Cs and Sr on these zeolites was followed by Langmuir-type isotherm. Cesium forms of these zeolites recrystallized to pollucite (CsAlSi₂O₆) above 900°C for zeolite A and above 1,200°C for chabazite. As for Sr forms, these zeolites changed to SrAl₂Si₂O₆ above 900°C.

These recrystallized phases were suitable hosts for the immobilization of Cs and Sr in the nuclear waste solutions.     

清洁解控和退役若干动向与新发展

对国际辐射防护协会第 1 0届大会 ( IRPA-1 0 )涉及的清洁解控和退役问题作了论述 ,包括排除、豁免、清洁解控和废物最少化 ;退役工程技术的发展 ,包括去污技术、切割解体技术、探测技术 ;介绍了一个研究堆退役例子和加速器退役 ;最后 ,还论及了退役中受关注的一些问题 ,如 :石墨废物、混凝土废物、重水堆退役的氚防护、退役时间和退役废物量等。     

Plastic and dissipated work and stored energy

This paper depicts one theoretical and experimental method to take into account the energy phenomena, associated with the elasto—plastic deformation process, during the elaboration of behaviour laws. The energy balance definition is examined in order to relate the stored energy of cold work to the hardening state variables. Two experimental approaches are used to study the evolution of the energy balance. The first one uses microcalorimetric technique and the second infrared technique. Several industrial metallic materials are studied by both approaches. Energy data are used to control the validity domain of the classical behaviour laws and to elaborate new more appropriate ones. Therefore, the hardening parameters cannot be identified with the thermodynamical forces. The use of energy considerations allows the definition of new thermodynamical forces and state variables, in the case of isotropic or kinematical hardening.     

Development and diversity and defense-in-depth application of ABWR feedwater pump and controller model

This work developed an advanced boiling water reactor (ABWR) feedwater pump and controller model, which was incorporated into Personal Computer Transient Analyzer (PCTran)-ABWR, a nuclear power plant simulation code. The feedwater pump model includes three turbine-driven feedwater pumps and one motor-driven feedwater pump. The feedwater controller includes a one-element/three-element water level controller and a specific feedwater speed controller for each feedwater pump. The performance tests, including step change of dome pressure, feedwater pumps transfer, inadvertent closure of all turbine control valves, and one feedwater pump trip at 100% power, demonstrate the feasibility of dynamic response of stand-alone model and incorporated model. Furthermore, a diversity and defense-in-depth analysis is performed to demonstrate the feasibility for motor-driven feedwater pump as an emergency core cooling system (ECCS) automatic diverse back-up. In Lungmen nuclear power plant (NPP), a diverse manual initiation means for the high pressure core flooder (HPCF) loop C is designed as the back-up of digitalized engineered safety features actuation system (ESFAS). If the motor-driven feedwater pump (MDFWP) can be an automatic digital diverse back-up for ESFAS, Lungmen NPP would be more robust to defend against software common-cause failure (CCF).     

全国核与辐射安全监管信息系统的研究和建议

文章简要介绍了全国核与辐射安全监管信息系统的前期规划建设情况,包括基本建设内容、系统总体架构、以及工作中发现的影响和制约工作开展的主要问题,并提出了建议。     

Construction and operational experience with small and medium power reactors and expected improvements

Past experience with small and medium power reactors (SMPRs) in the areas of construction and operation is examined in this paper. Current development of SMPRs focuses on passive safety features; larger design and safety margins; reduction of construction periods through simplification, modularization and increased shop fabrication.