A biodegradable triblock copolymer poly(ethylene glycol)-b-poly(l-lactide)-b-poly(l-lysine): Synthesis,self-assembly,and RGD peptide modification

A novel biodegradable triblock copolymer poly(ethylene glycol)-b-poly(l-lactide)-b-poly(l-lysine) (PEG–PLA–PLL) was synthesized by acidolysis of poly(ethylene glycol)-b-poly(l-lactide)-b-poly(ɛ-benzyloxycarbonyl-l-lysine) (PEG–PLA–PZLL) obtained by the ring-opening polymerization (ROP) of ɛ-benzyloxycarbonyl-l-lysine N-carboxyanhydride (ZLys NCA) with amino-terminated PEG–PLA–NH₂ as a macroinitiator, and the pendant amino groups of the lysine residues were modified with a peptide known to modulate cellular functions, Gly-Arg-Gly-Asp-Ser-Tyr (GRGDSY, abbreviated as RGD) in the presence of 1,1′-carbonyldiimidazole (CDI). The structures of PEG–PLA–PLL/RGD and its precursors were confirmed by ¹H NMR, FT-IR, amino acid analysis and XPS analysis. The cell adhesion and cell spread on the PEG–PLA–PLL/RGD film were enhanced compared to those on pure PLA film. Therefore, the novel RGD-grafted triblock copolymer is promising for cell or tissue engineering applications. Both copolymers PEG–PLA–PZLL and PEG–PLA–PLL showed an amphiphilic nature and could self-assemble into micelles of homogeneous spherical morphology. The micelles were determined by fluorescence technique, dynamic light scattering (DLS), and field emission scanning electron microscopy (ESEM) and could be expected to find application in drug and gene delivery systems.     

Synthesis and characterization of A-B-A triblock copolymers derived from chloro-telechelic poly(l-lactide): combining ring-opening polymerization (ROP) and atom transfer radical polymerization (ATRP)

Ring-opening polymerization (ROP) of l-lactide was combined with atom transfer radical polymerization (ATRP) to produce well-defined linear block copolymers. Poly(l-lactide) (PLLA) was synthesized via ROP using ethylene glycol as an initiator and stannous octoate as a catalyst. The isolated hydroxy-telechelic PLLA was reacted with thionyl chloride and pyridine in toluene to afford chloro-telechelic PLLA (Cl-PLLA-Cl). The latter was employed as a macroinitiator in the synthesis of A-B-A triblock copolymers having either tert-butyl acrylate or benzyl acrylate outer blocks. Outer-block molecular weight was targeted by the mole ratio of monomer (acrylate) to the PLLA chloride initiating sites. The actual incorporation of acrylate into the triblock copolymer was lower than the molar feed ratio as the copolymer became increasingly less soluble upon conversion of acrylate in all cases.     

Thermoresponsive core-shell-corona micelles of poly(ethyleneglycol)-b-poly(N-isopropylacrylamide)-b-polystyrene

Core-shell-corona micelles with a thermoresponsive shell self-assembled by triblock copolymer of poly(ethyleneglycol)-b-poly(N-isopropylacrylamide)-b-polystyrene (PEG₄₅-b-PNIPAM₁₆₈-b-PS₄₆) are studied by ¹H NMR, light scattering and atomic force microscopy. The thermoresponsive triblock copolymer, which has a relatively short hydrophobic PS block, can disperse in water at room temperature to form core-shell-corona micelles with the hydrophobic PS block as core, the thermoresponsive PNIPAM block as shell and the hydrophilic PEG block as corona. At temperature above lower critical solution temperature (LCST) of the PNIPAM block, the PNIPAM chains gradually collapse on the PS core to shrink the size and change the structure of the resultant core-shell-corona micelles with temperature increasing. It is found that there possibly exists an interface between the PNIPAM shell and PEG corona of the core-shell-corona micelles at temperature above LCST of the PNIPAM block.     

Synthesis and characterization of poly(l-glutamic acid)-block-poly(l-phenylalanine)

Poly(γ-benzyl l-glutamate)-block-poly(l-phenylalanine) was prepared via the ring opening polymerization of γ-benzyl l-glutamate N-carboxyanhydride and l-phenylalanine N-carboxyanhydride using n-butylamine·HCl as an initiator for the living polymerization. Polymerization was confirmed by ¹H-nuclear magnetic resonance spectroscopy and matrix assisted laser desorption ionization time of flight mass spectroscopy. After deprotection, the vesicular nanostructure of poly(l-glutamic acid)-block-poly(l-phenylalanine) particles was examined by transmission electron microscopy and dynamic light scattering. The pH-dependent properties of the nanoparticles were evaluated by means of ζ-potential and transmittance measurements. The results showed that the block copolypeptide could be prepared using simple techniques. Moreover, the easily prepared PGA-PPA block copolypeptide showed pH-dependent properties due to changes in the PGA ionization state as a function of pH; this characteristic could potentially be exploited for drug delivery applications.     

Study on crystalline morphology of poly(l-lactide)-poly(ethylene glycol) diblock copolymer

Crystallization behavior, structural development and morphology evolution in a series of diblock copolymers of poly(l-lactide)-block-poly(ethylene glycol) (PLLA-b-PEG) were investigated via differential scanning calorimetry, wide-angle X-ray diffraction, polarized optical microscopy and atomic force microscopy. In these copolymers, both blocks are crystallizable and biocompatible. It was interesting that these PLLA-b-PEG diblock copolymers could form spherulites with banded textures, which was undercooling dependent. Single crystals with an abundance of screw dislocations were also observed via AFM. Such results indicated that these ringed spherulites and single crystals were formed during the crystallization of the PLLA blocks.     

Functionalization of amphiphilic coil-rod-coil triblock copolymer poly(2-vinylpyridine)-b-poly(n-hexyl isocyanate)-b-poly(2-vinylpyridine) with florescence moiety and C60

We recently achieved quantitative synthesis of an amphiphilic coil-rod-coil triblock copolymer, poly(2-vinylpyridine)-b-poly(n-hexyl isocyanate)-b-poly(2-vinylpyridine), by coupling in situ living diblock copolymer poly(2-vinylpyridine)-b-poly(n-hexyl isocyanate) (P2VP-b-PHIC) using malonyl chloride in the presence of pyridine. This led to the introduction of an active methylene group that is a site for further functionalization in the rod block. The Michael addition reaction of the triblock copolymer with 7-(4-trifluoromethyl) coumarin acrylamide led to copolymer bearing a fluorescent pendent in the rod block. The fluorescent labeled copolymers were isolated in ∼94% yields. Similarly C₆₀ pendent was introduced to the rod block by the Bingel reaction. The yields of C₆₀ functionalized copolymers were ∼54%. The precursor and functionalized amphiphilic coil-rod-coil copolymer show diverse morphologies, such as micelles and vesicles by simply changing the solvent. For the C₆₀ functionalized block copolymer, structural constraints in micelles and vesicles prevented C₆₀ pendents to aggregate.     

Synthesis of novel temperature responsive PEG-b-[PCL-g-P(MEO2MA-co-OEGMA)]-b-PEG (tBG) triblock-graft copolymers and preparation of tBG/graphene oxide composite hydrogels via click chemistry

Novel triblock-graft copolymers, poly ethylene glycol-b-[poly(ε-caprolactone)-g-poly(2-(2-methoxyethoxy) ethyl methacrylate-co-oligo (ethylene glycol) methacrylate)]-b-poly ethylene glycol (PEG-b-[PCL-g-P(MEO₂MA-co-OEGMA)]-b-PEG) (tBG), were synthesized via ring-opening polymerization (ROP) and atom transfer radical polymerization (ATRP). In the synthesis process, temperature responsive P(MEO₂MA-co-OEGMA) chains were grafted onto the PCL block of triblock copolymer PEG-b-PCL-b-PEG to improve its hydrophilicity. This method succeeded in increasing the solubility of PEG-b-PCL-b-PEG in water, and more importantly, endowing PEG-b-PCL-b-PEG with temperature sensitivity. By adjusting the feed ratio of 2-(2-methoxy ethoxy) ethyl methacrylate (MEO₂MA) and oligo (ethylene glycol) methacrylate (OEGMA) monomers, the lower critical solution temperature (LCST) of the tBG can be realized at about 37 °C. Taking advantage of the excellent mechanical property of graphene sheets, alkyne-functionalized graphene oxide (alkyne-GO) was introduced to cross-link tBGs and prepare tBG/GO composite hydrogel through click reaction between tBG-N₃ and alkyne-GO. Different from traditional cross-linkers, alkyne-GO acts as reinforcing filler in the composite hydrogel. Benefiting from superior properties of PCL, PEG, P(MEO₂MA-co-OEGMA) and GO, the as-prepared temperature responsive tBG/GO hydrogel exhibits excellent mechanical strength and toughness, demonstrating future potential applications in tissue engineering and biotechnology fields.     

Synthesis of poly(ethylene glycol)-<Emphasis Type="Italic">b</Emphasis>-poly(mercapto ethylacrylamide) diblock copolymer via atom transfer radical polymerization

Atom transfer radical polymerization was used to synthesize a well-defined poly(ethylene glycol)-b-poly(mercapto ethylacrylamide) (PEG-b-PMEAAm) diblock copolymer. Poly(ethylene glycol)-b-poly[N-(acryloxysuccinimide)](PEG-b-PNAS) was synthesized at 80 °C using methoxy-poly(ethylene glycol)-2-bromo propanoate (PEG-Br) and CuBr/2,2′-bipyridine as a macroinitiator and catalyst, respectively. The monomer conversion was determined by ¹H nuclear magnetic resonance (NMR) spectroscopy. The resulting PEG-b-PNAS diblock copolymer was characterized by gel permeation chromatography, Fourier transform infrared (FT-IR), and ¹H NMR spectroscopy. Disulfide groups were introduced by a simple reaction through the N-acryloxysuccinimide (NAS) moieties of the PEG-b-PNAS diblock copolymer with cystamine dihydrochloride in the presence of triethylamine. FT-IR spectroscopy was used to confirm the introduction of disulfide moieties into the polymer repeating units. Subsequently, a thiol-functionalized block copolymer was prepared using DL-dithiothreitol (DTT) as the reducing agent and the reduction step was monitored by ¹H NMR spectroscopy. This thiol group was transformed easily to a disulfide bond using FeCl₃ as an oxidizing agent. The transformation into disulfide could be visualized easily as insoluble polymeric particles formed from a clear solution of PEG-b-PMEAAm after oxidation.     

Synthesis of amphiphilic triblock copolymers and application for morphology control of calcium carbonate crystals

A series of amphiphilic triblock copolymers poly(ethylene glycol)-block-poly(acrylic acid)-block-poly(n-butyl acrylate) (PEG-b-PAA-b-PnBA) differing only in the relative block lengths were synthesized by the acid-catalyzed elimination of the tert-butyl groups from poly(ethylene glycol)-block-poly(tert-butyl acrylate)-block-poly(n-butyl acrylate) (PEG-b-PtBA-b-PnBA), which was synthesized by atom-transfer radical polymerization (ATRP). The degree of polymerization, molecular weight and percentage of hydrolysis of the product PEG-b-PAA-b-PnBA were studied by gel permeation chromatography (GPC), NMR and matrix-assisted laser desorption/ionization time-of-flight mass spectroscopy (MALDI-TOF-MS). Dynamic light scattering (DLS) and transmission electron microscopy (TEM) were used to study the aggregation states of copolymers in water solution. The radii of the copolymer micelles shrink as Ca²⁺ is introduced into the solutions. The crystallization behaviors of calcium carbonate controlled by copolymer 1 (PEG₁₁₂-b-PAA₈₆-b-PnBA₆₀) and copolymer 2 (PEG₁₁₂-b-PAA₄₀-b-PnBA₇₂) differing mainly in the length of PAA block were systematically studied. It was found that the crystallization products are composed of calcite and vaterite, and the ratio of vaterite to calcite increases with increasing the concentration of copolymer 1. For copolymer 2, however, only calcite is obtained at all the concentration range investigated in this work.     

Synthesis of poly(ethylene oxide)-block-poly(methyl methacrylate)-block-polystyrene triblock copolymers by two-step atom transfer radical polymerization

The synthesis of ABC triblock copolymer poly(ethylene oxide)-block-poly(methyl methacrylate)-block-polystyrene (PEO-b-PMMA-b-PS) via atom transfer radical polymerization (ATRP) is reported. First, a PEO-Br macroinitiator was synthesized by esterification of PEO with 2-bromoisobutyryl bromide, which was subsequently used in the preparation of halo-terminated poly(ethylene oxide)-block-poly(methyl methacrylate) (PEO-b-PMMA) diblock copolymers under ATRP conditions. Then PEO-b-PMMA-b-PS triblock copolymer was synthesized by ATRP of styrene using PEO-b-PMMA as a macroinitiator. The structures and molecular characteristics of the PEO-b-PMMA-b-PS triblock copolymers were studied by FT-IR, GPC and ¹H NMR.     

Syntheses of well-defined poly(siloxane)-b-poly(styrene) and poly(norbornene)-b-poly(styrene) block copolymers using functional alkoxyamines

Functional alkoxyamines, 1-[4-(4-lithiobutoxy)phenyl]-1-(2,2,6,6-tetramethylpiperidinyl-N-oxyl)ethane (2) and 1-[4-(2-vinyloxyethoxy)phenyl]-1-(2,2,6,6-tetramethylpiperidinyl-N-oxyl)ethane (3) were prepared, and well-defined poly(hexamethylcyclotrisiloxane)-b-poly(styrene)[poly(D₃)-b-poly(St)] and poly(norbornene)-b-poly(St) [poly(NBE)-b-poly(St)] were prepared using the alkoxyamines. The first step was preparation of poly(D₃) and poly(NBE) macroinitiators, which were obtained by the ring-opening anionic polymerization of D₃ using 2 as an initiator and the ring-opening metathesis polymerization of NBE using 3 as a chain transfer. The radical polymerization of St by the poly(D₃) and poly(NBE) macroinitiators proceeded in the ‘living’ fashion to give well-defined poly(D₃)-b-poly(St) and poly(NBE)-b-poly(St) block copolymers.     

The influence of hydrophobic substitution on self-association of poly(ethylene oxide)-b-poly(n-alkyl glycidyl carbamate)s-b-poly(ethylene oxide) triblock copolymers in aqueous media

A series of amphiphilic poly(ethylene oxide)-b-poly(n-alkyl glycidyl carbamate)s-b-poly(ethylene oxide) triblock copolymers were synthesized by reaction between poly(ethylene oxide)-b-polyglycidol-b-poly(ethylene oxide) precursor copolymer and four n-alkyl isocyanates: ethyl, propyl, butyl and pentyl. After dissolution in water at room temperature the copolymers spontaneously form micelles. The critical micellization concentrations were determined by UV-VIS spectroscopy. The dimensions of the micelles, the aggregation numbers, and in some cases the micellar shape were determined by dynamic and static light scattering in a relatively broad temperature range. Special attention has been paid to the influence of the number of the carbon atoms in the alkyl chains, and respectively, the relative hydrophobicity of the middle block upon the self-association process. Clouding transition was observed for all of the copolymers, the clouding point being dependent upon the length of the alkyl chain.     

Impacts of stereoregularity and stereocomplex formation on physicochemical, protein adsorption and cell adhesion behaviors of star-shaped 8-arms poly(ethylene glycol)-poly(lactide) block copolymer films

Biodegradable stereocomplex film exhibiting soft and stretchy character was prepared by simply blending between enantiomeric 8-arms poly(ethylene glycol)-block-poly(l-lactide) (8-arms PEG-b-PLLA) and 8-arms PEG-b-PDLA copolymers with star-shaped structure. The stereocomplex film exhibited higher T_g and PLA crystallinity than those of original copolymer films. Effects of stereoregularity and stereocomplexation on protein adsorption and L929 cells attachment/proliferation behaviors onto the films were analyzed from the viewpoint to design a new class of implantable soft biomaterial. The stereocomplex film was found to exhibit large amount of protein adsorption than original films. Furthermore, cell attachment efficiency and proliferation rate on the film were significantly enhanced by stereocomplexation. This stereocomplex material is expected to be applicable as degradable temporary scaffold for soft tissue regeneration. Consequently, it was indicated that the stereocomplex formation could be proposed to be a novel method to control the protein- and cell-adhesive properties of biodegradable matrix composed of PEG-PLA copolymer.     

Physical properties of poly(cyclohexyl methacrylate)-b-poly(iso-butyl acrylate)-b-poly(cyclohexyl methacrylate) triblock copolymers synthesized by controlled radical polymerization

The microphase segregation of different poly(cyclohexyl methacrylate)-b-poly(iso-butyl acrylate)-b-poly(cyclohexyl methacrylate), PCH-b-PiBA-b-PCH, triblock copolymers obtained by atom transfer radical polymerization has been evaluated by dynamic mechanical thermal analysis through location of the two relaxations ascribed to cooperative motions of each block. Additionally, other secondary relaxations have been found, whose characteristics are also dependent on molecular weight of outer and rigid segments. The length of these hard blocks influences significantly the stiffness and microhardness found in these triblock copolymers. These two mechanical parameters increase as molecular weight of poly(cyclohexyl methacrylate) does. The morphological aspects have been examined by small angle X-ray scattering and atomic force microscopy.     

Crystallization of poly(l-lactide-dimethyl siloxane-l-lactide) triblock copolymers and its effect on morphology of microphase separation

This investigation characterizes the molten morphologies following isothermal crystallization of poly(l-lactide-block-dimethyl siloxane-block-l-lactide) triblock copolymers, which were synthesized by ring-opening polymerization of l-lactide using hydroxyl-telechelic PDMS as macroinitiators, via small-angle X-ray scattering (SAXS) and transmission electron microscopy (TEM). The break-out and preservation of the nanostructure of the triblock copolymer depended on the segregation strength, which was manipulated by varying the degree of polymerization. The crystallization kinetics of these semicrystalline copolymers and the effect of isothermal crystallization on their melting behaviors were also studied using DSC, FT-IR and WAXS. The exclusive presence of α-phase PLLA crystallite was verified by identifying the absence of the WAXS diffraction signal at 2θ = 24.5° and the presence of IR absorption at 1749 cm⁻¹ when the PLLA segment of the block copolymers was present as a minor component. The dependence of the crystallization rate (Rc) on the chemical composition of the triblock copolymers reveals that the Rc of the triblock copolymers was lower than that of PLLA homopolymer and the Rc were substantially reduced when the minor component of the crystallizable PLLA domains was dispersed in the PDMS matrix.     

Crystallization, structure and properties of plasticized poly(l-lactide)

Poly(l-lactide) (PLA) was plasticized with poly(ethylene glycol)s having M_w of 400 and 600 g/mol. In addition to poly(ethyne glycol)s with hydroxyl end groups, monomethyl ethers of poly(ethylene glycol) having M_w of 550 and 750 g/mol, with chains terminated with hydroxyl groups and methyl groups, were used. The effect of different end groups on the plasticization of both amorphous and semicrystalline PLA was studied. The crystallization, structure, thermal and tensile properties of PLA and PLA with 5 and 10 wt% of plasticizers were explored. No marked effect induced by different end groups of plasticizers was found. All the plasticizers used decreased T_g and increased the ability of PLA to cold crystallization. While an amorphous plasticized PLA could be deformed to about 550%, a semicrystalline PLA with the same total plasticizer content exhibited nonuniform plasticization of the amorphous phase and less ability to the plastic deformation. Nevertheless, a 20% elongation at break was achieved for a semicrystalline PLA with 10 wt% of the plasticizer. The plastic deformation of both neat and plasticized PLA was associated with crazing.     

PBT-b-PEO-b-PBT triblock copolymers: Synthesis,characterization and double-crystalline properties

We demonstrated here a facile method to synthesize novel double crystalline poly(butylene terephthalate)-block-poly(ethylene oxide)-block-poly(butylene terephthalate) (PBT-b-PEO-b-PBT) triblock copolymers by solution ring-opening polymerization (ROP) of cyclic oligo(butylene terephthalate)s (COBTs) using poly(ethylene glycol) (PEG) as macroinitiator and titanium isopropyloxide as catalyst. The structure of copolymers was well characterized by ¹H NMR and GPC. TGA results revealed that the decomposition temperature of PEO in triblock copolymers increased about 30 °C to the same as PBT copolymers, after being end-capped with PBT polymers. These triblock copolymers showed double crystalline properties from PBT and PEO blocks, observed from DSC and WAXD measurements. The melting and crystallization peak temperatures corresponding to PBT blocks increased with PBT content. The crystallization of PBT blocks showed the strong confinement effects on PEO blocks due to covalent linking of PBT blocks with PEO blocks, where the melting and crystallization temperatures and crystallinity corresponding to PEO blocks decreased significantly with increment of PBT content. The confinement effect was also observed by SAXS experiments, where the long distance order between lamella crystals decreases with increasing PBT length. For the triblock copolymer with highest PBT content (PBT₅₄-b-PEO₂₂₇-b-PBT₅₄), this effect shows a 30 °C depression on PEO crystals' melting temperature and 77% on enthalpy, respectively, compared to corresponding PEO homopolymer. The crystal morphology was observed by POM, and amorphous-like spherulites were observed during PBT crystallization.     

Preparation of block-brush PEG-b-P(NIPAM-g-DMAEMA) and its dual stimulus-response

Well-defined dually responsive block-brush copolymer of poly(ethylene glycol)-b-[poly(N-isopropylacrylamide)-g-poly(N,N-dimethylamino-ethylmethacrylate)], [PEG-b-P(NIPAM-g-PDMAEMA)] was successfully prepared by the combination of atom transfer radical polymerization (ATRP) and click chemistry based on azide-capped PDMAEMA and alkyne-pending PEG-b-PNIPAM copolymer. Azide-capped PDMAEMA was synthesized through ATRP of DMAEMA monomer using an azide-functionalized initiator of β-azidoethyl-2-bromoisobutyrate. Alkyne-pending PEG-b-PNIPAM copolymer was obtained through ATRP copolymerization of NIPAM with propargyl acrylate. The final block-brush copolymer was synthesized by the click reaction between these two polymer precursors. Because of characteristics of three different blocks, the copolymer exhibited dually thermo- and pH-responsive behavior. The responsive behaviors of block-brush copolymer were studied by laser light scattering, temperature-dependent turbidity measurement and micro differential scanning calorimetry. The phase transition temperature of block-brush copolymer increased with the decrease of pH value. At pH = 5.0, the copolymer displayed weak thermo-responsive behavior and might form uni-molecular micelles upon heating. At higher pH values, the block-brush copolymer aggregated intermolecularly into the micelles during the phase transition.     

Synthesis of amphiphilic polyethylene-b-poly(l-glutamate) block copolymers with vastly different solubilities and their stimuli-responsive polymeric micelles in aqueous solution

This paper describes the synthesis, characterization, and self-assembly behavior of amphiphilic polyethylene-block-poly(l-glutamate) (PE-b-PGA) diblock copolymers. PE-b-PGA diblock copolymers were obtained by ring-opening polymerization (ROP) of γ-benzyl-l-glutamate-N-carboxyanhydride (BLG-NCA) using PE–COOCH(ⁱPr)NH₂ as a macroinitiator and subsequent deprotection of the benzylester groups. The self-assembly behaviors of the PE-b-PGA copolymers in water were studied as a function of pH and ionic strength by means of fluorescence spectroscopy, laser light scattering, UV-circular dichroism, and transmission electron microscopy. The size of the polymeric micelles decreases with a decreasing pH value even at high salt concentrations because the solvating PGA units can perform a coil-to-helix transition.     

Aqueous lubricating properties of charged (ABC) and neutral (ABA) triblock copolymer chains

Application of charged polymer chains as additives for lubricating neutral surfaces in aqueous environment, especially via polymer physisorption, is generally impeded by the electrostatic repulsion between adjacent polymers on the surface. In this study, we have investigated the adsorption and aqueous lubricating properties of an amphiphilic triblock copolymer, comprised of a neutral poly(ethylene glycol) (PEG) block, a hydrophobic poly(2-methoxyethyl acrylate) (PMEA) block, and a charged poly(methacrylic acid) (PMAA) block, namely PEG-b-PMEA-b-PMAA. After adsorption onto a nonpolar hydrophobic surface from aqueous solution, an equal and homogeneous mixture of neutral PEG and charged PMAA chains is formed on the surface, with an adsorbed polymer mass comparable to its fully neutral counterpart, PEG-b-PMEA-b-PEG. The lubricity of PEG-b-PMEA-b-PMAA showed significant improvement compared to fully charged polymer chains, e.g. poly(acrylic acid)-block-poly(2-methoxyethyl acrylate) (PAA-b-PMEA), which is attributed to dilution of charged moieties on the surface and subsequent improvement of the lubricating film stability.