Characterization of aqueous micellar solutions of amphiphilic block copolymers of poly(acrylic acid) and polystyrene prepared via ATRP. Toward the control of the number of particles in emulsion polymerization

A series of diblock, triblock and star-block copolymers composed of polystyrene and poly(acrylic acid) were synthesized by ATRP. The structure of the copolymers, the size of the blocks and the composition were varied, keeping however a short polystyrene block and a poly(acrylic acid) content larger than 60 mol% to allow solubility in alkaline water. Their micellization was studied by static and dynamic light scattering and the influence of their structural characteristics on the aggregation number, N_agg, was examined at low salt concentration and alkaline pH. It was shown that micelles were in thermodynamic equilibrium and that N_agg followed the power law N_agg∼N_A^−0.9N_S² (with N_A, the total number of acrylic acid units in the copolymer and N_S, the total number of styrene units), that is characteristic of amphiphile micelles formed from strongly segregated block copolymers. Moreover, N_agg was independent of salt concentration in the investigated range. The same copolymers were previously used as stabilizers in emulsion polymerization [Macromolecules 34 (2001) 4439]. The final latex particle concentration, N_p, was compared with N_m, the initial micelle concentration. This enabled us to conclude that among the block copolymers studied, those with high acid content behaved like low molar mass surfactants. In contrast, those with low acid content formed stable micelles that could be directly nucleated to create latex particles, allowing a good control over N_p.     

Synthesis and characterization of pH/temperature-sensitive block copolymers via atom transfer radical polymerization

In order to prepare well-defined pH-sensitive block copolymers with a narrow molecular weight distribution (MWD), we synthesized a pH-sensitive block copolymer via atom transfer radical polymerization (ATRP) of sulfamethazine methacrylate monomer (SM) and amphiphilic diblock copolymers by the ring-opening polymerization of d,l-lactide/?-caprolactone (LA/CL), and their sol-gel phase transition was investigated. SM, which is a derivative of sulfonamide, was used as a pH responsive moiety, while PCLA-PEG-PCLA was used as a biodegradable, as well as a temperature sensitive one, amphiphilic triblock copolymer. The pentablock copolymer, OSM-PCLA-PEG-PCLA-OSM, was synthesized using Br-PCLA-PEG-PCLA-Br as an ATRP macroinitiator. The number average molecular weights of SM were controlled by adjusting the monomer/initiator feed ratio. The macroinitiator was synthesized by the coupling of 2-bromoisobutyryl bromide with PCLA-PEG-PCLA in the presence of triethyl amine catalyst in dichloromethane. The resultant block copolymer shows a narrow polydispersity. The block copolymer solution shows a sol-gel transition in response to a slight pH change in the range of 7.2-8.0. Gel permeation chromatography (GPC) and NMR were used for the characterization of the polymers that were synthesized.     

pH- and temperature-responsive amphiphilic diblock copolymers of 4-vinylpyridine and oligoethyleneglycol methacrylate synthesized by RAFT polymerization

Diblock copolymers of 4-vinylpyridine (4VP) and oligoethyleneglycol methyl ether methacrylate (OEGMA) were synthesized for the first time using RAFT polymerization technique as potential drug delivery systems. Effects of the number of ethylene glycol units in OEGMA, chain length of hydrophobic P4VP block, pH, concentration and temperature on the solution behavior of the copolymers were investigated comprehensively. Copolymer chains formed micelles at pH values higher than 5 whereas unimeric polymers were observed to exist below pH 5, owing to the repulsion between positively charged P4VP blocks. The size of the micelles was dependent on the relative length of blocks, P4VP and POEGMA. Thermo-responsive properties of copolymers were investigated depending on the pH and length of P4VP block. The increase in the length of P4VP block decreased the LCST substantially at pH 7. At pH 3, LCST of copolymers shifted to higher temperatures due to the increased interaction of copolymers with water through positively charged P4VP block.     

Synthesis and self-association in aqueous media of poly(ethylene oxide)/poly(ethyl glycidyl carbamate) amphiphilic block copolymers

New temperature sensitive AB, ABA, and BAB amphiphilic block copolymers consisting of hydrophilic poly(ethylene oxide) and hydrophobic poly(ethyl glycidyl carbamate) blocks were synthesized by anionic polymerization followed by chemical modification reactions. The self-association of the block copolymers in aqueous media was studied by UV-vis spectroscopy and dynamic and static light scattering. The obtained block copolymers spontaneously form micelles in aqueous media. The critical micellization concentration varied from 0.5 to 4 g/L depending on the copolymer architecture and composition. The influence of the temperature upon the self-association of the block copolymers was investigated. The increase of temperature did not affect the value of the critical micellization concentration, but led to the formation of better defined micelles with narrow size distribution.     

Amphiphilic block copolymers bearing strong push-pull azo chromophores: Synthesis, micelle formation and photoinduced shape deformation

In this work, a series of amphiphilic diblock copolymers bearing strong push-pull type azo chromophores was synthesized through post-polymerization azo-coupling reaction scheme. The copolymers (P(CNAZO_m-b-MAA_n)), composed of 2-(N-ethyl-N-(4-(4′-cyanophenylazo)-phenyl)amino)ethyl methacrylate (CNAZO) and methacrylic acid (MAA) blocks, were obtained through four-step reactions. Firstly, precursor diblock copolymers (P(EMA_m-b-tBMA_n)) were obtained through sequential two-stage ATRP reactions of 2-(N-ethyl-N-phenylamino)ethyl methacrylate (EMA) and tert-butyl methacrylate (tBMA). Then, 4-amino-4′-cyanoazobenzene chromophores were introduced by azo-coupling reaction of P(EMA_m-b-tBMA_n) with diazonium salt of 4-aminobenzonitrile. Finally, P(CNAZO_m-b-MAA_n) was obtained through selective hydrolysis of the tert-butyl ester linkages in the tBMA blocks. Three block copolymers with the same CNAZO block length (m = 100) and different MAA block lengths (n = 5, 13, 23) were prepared by this method. The polymer and copolymers prepared in the process were characterized by GPC, ¹H NMR, UV-vis, DSC and TGA measurements. Results show that P(CNAZO_m-b-MAA_n) forms spherical micellar aggregates by gradually increasing the water content in THF/H₂O mixtures. The diameters of the spherical aggregates are related to the composition of the block copolymers and the water-adding rate. The block copolymer with larger molecular weight of the hydrophilic MAA block forms the aggregates with the smaller average size. The increase of the water-adding rate also shows an effect to reduce the diameters. Upon irradiation with a linearly polarized Ar⁺ laser beam, the spherical aggregates can be elongated in the light polarization direction. The deformation degree shows an almost linear dependence on the light irradiation time in the testing period. The deformed aggregates can recover the original spherical shape after thermal annealing at a temperature above T_g of the block copolymer.     

One-step synthesis of poly(2-oxazoline)-based amphiphilic block copolymers using a dual initiator for RAFT polymerization and CROP

A range of poly(2-oxazoline) (POx)-based amphiphilic block copolymers were synthesized using 4-cyano-4-(dodecylthiocarbonothioylthio)pentyl-4-methylbenzenesulfonate (CDPS) as a dual initiator for reversible addition-fragmentation chain transfer (RAFT) polymerization and cationic ring-opening polymerization (CROP) in a one-step procedure. Methyl (meth)acrylate, butyl (meth)acrylate, tert-butyl (meth)acrylate, and N-isopropylacrylamide were polymerized for the hydrophobic block, and 2-methyl-2-oxazoline and 2-ethyl-2-oxazoline were used as the hydrophilic block. RAFT polymerization and CROP proceeded independently in a controlled manner and resulted in amphiphilic block copolymers with a narrow molecular weight distribution. CDPS was found to be a useful dual initiator for the one-step synthesis of POx-based amphiphilic block copolymers via a combination of RAFT polymerization and CROP.     

New self-assembling biocompatible-biodegradable amphiphilic block copolymers

New biodegradable-biocompatible amphiphilic block copolymers were prepared in good yields by SnOct₂ catalyzed ring opening polymerization of ε-caprolactone initiated by monomethoxy-terminated poly(ethylene glycol) (MPEG). Coupling of the AB copolymers with hexamethylene diisocyanate afforded ABA (formally ABBA) block copolymers. Both AB and ABA copolymers were thoroughly characterized by IR and NMR spectroscopy, size exclusion chromatography, TGA and DSC thermal analysis. In particular, DSC measurements evidenced that the copolymer hydrophilic-lipophilic balance appreciably affected the state of adsorbed water. Polarized optical microscopy of bulk materials and pyrene fluorescence emission of polymer water solutions highlighted the copolymer tendency to phase separation and self-organization, respectively. Most of the prepared materials formed micelles in water and the copolymer structure appreciably affected their critical micellar concentration. In vitro cytocompatibility tests confirmed the low toxicity of the prepared polymeric materials which enhances their potential for biomedical applications.     

Synthesis of block copolymers via redox polymerization

Polymerization and copolymerization of vinyl monomers such as acrylamide, acrylonitrile, vinyl acetate, and acrylic acid with a redox system of Ce(IV) and organic reducing agents containing hydroxy groups were studied. The reducing compounds were poly(ethylene glycol)s, halogen‐containing polyols, and depolymerization products of poly(ethylene terephthalate). Copolymers of poly(ethylene glycol)s‐b‐polyacrylonitrile, poly(ethylene glycol)s‐b‐poly(acrylonitrile‐co‐vinyl acetate), poly(ethylene glycol)s‐b‐polyacrylamide, poly(ethylene glycol)s‐b‐poly(acrylamide‐co‐vinyl acetate), poly(1‐chloromethyl ethylene glycol)‐bpoly(acrylonitrile‐co‐vinyl acetate), and bis[poly(ethylene glycol terephthalate)]‐b‐poly(acrylonitrile‐co‐vinyl acetate) were produced. The yield of acrylamide polymerization and the molecular weight of the copolymer increased considerably if about 4% vinyl acetate was added into the acrylamide monomer. However, the molecular weight of the copolymer was decreased when 4% vinyl acetate was added into the acrylonitrile monomer. Physical properties such as solubility, water absorption, resistance to UV light, and viscosities of the copolymers were studied and their possible uses are discussed. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 71: 1385–1395, 1999     

乳液聚合中乳化剂对聚合物乳液稳定性的影响

简要叙述了聚合物乳液稳定性的测定方法，详细地讨论了乳化剂的类型、用量及加入方式等对丙烯酸酯类聚合物乳液的化学稳定性、机械稳定性及贮存稳定性的影响。     

Self-assembly of amphiphilic liquid crystal block copolymers containing a cholesteryl mesogen: Effects of block ratio and solvent

We report on the self-assembly, in water and in bulk, of amphiphilic liquid crystal block copolymers consisting of a cholesterol-based smectic LC polymer block (PAChol) and poly(ethylene glycol) (PEG) block. Two series of block copolymers, PEG₄₅-b-PAChol and PEG₁₁₄-b-PAChol (45 and 114 are the degree of polymerization of PEG blocks) with different hydrophilic/hydrophobic weight ratios were synthesized and characterized in detail. Depending on the diblock composition, smectic polymer vesicles and/or nanofibers were formed by adding water into a dilute solution of copolymers in dioxane. If THF is used instead of dioxane as solvent, solid spherical aggregates were obtained upon water addition for PEG₄₅-b-PAChol series, while macroscopic precipitation occurred for PEG₁₁₄-b-PAChol series. The mesomorphic and microphase segregation structures of the block copolymers in bulk were studied by X-ray scattering, DSC and POM. The interdigital smectic A (SmA_d) phase with a lamellar period of 4.25 nm was detected in all block copolymers. For PEG₁₁₄-b-PAChol₅ (PEG/PAChol weight ratio = 66/34) and PEG₁₁₄-b-PAChol₁₂ (45/55), lamellar type of microphase segregation was observed.     

Self-assembling of star-like amphiphilic block copolymers with polyelectrolyte blocks. Effect of pH

The self-assembling behaviour of a four-arm amphiphilic star block copolymer, (PMMA₇₃-b-PAA₁₄₃)₄, with poly(methyl methacrylate) inner blocks and poly(acrylic acid) outer blocks in ratio 1:2 (PMMA:PAA) has been investigated in aqueous solutions as a function of pH by dynamic light scattering and cryo-transmission electron microscopy. At low pH (pH ≤ 5) the amphiphile forms in the presence of salt both spherical and worm-like micellar aggregates that coexist in solution. At high pH (pH > 12) the solution contains mainly spherical micelles and a small number of larger aggregates that have ‘pearl-necklace’ structure, indicating the disintegration of the worm-like species. In addition to the experiments, computer simulations of the four-arm amphiphilic star block copolymer with the same ratio of the blocks as above were conducted using a coarse-grained model. The simulations predict the formation of the worm-like micellar aggregates at low pH and the spherical ones at high pH. The changes in the morphology of the aggregates are related to the higher degree of ionization of poly(acrylic acid) blocks at high pH and to the swelling of the corona of the micelles by the higher osmotic pressure due to trapped counterions.     

Nanostructured latex particles synthesized by nitroxide-mediated controlled/living free-radical polymerization in emulsion

Suspensions of diblock and triblock copolymer particles comprising a poly(n-butyl acrylate) first/central block and polystyrene or poly(methyl methacrylate) second/outer blocks were synthesized by nitroxide-mediated controlled/living free-radical emulsion polymerization. Monofunctional and difunctional alkoxyamines based on the nitroxide SG1 were used as initiators. For the sake of simplicity, sequential monomer additions were performed without any removal of unreacted monomer. Self-assembly of the obtained block copolymers was investigated both under the latex form as well as after different thermal treatments. AFM and TEM analyses revealed the occurrence of “onion-like” lamellar microphases directly inside latex particles for high enough copolymer molar masses and irrespective of molar mass distribution. This particular organization evolved towards more classical block copolymer morphologies upon solvent casting and/or thermal annealing of latex films.     

Amphiphilic star block copolymers: Influence of branching on lyotropic/interfacial properties

How can the degree of branching influence the lyotropic properties of amphiphilic block copolymers? In order to provide a qualitative answer to this question, we have prepared a library of poly(propylene sulfide)-bl-poly(ethylene glycol) (PPS-PEG) block copolymers, varying the hydrophobic block (PPS) length and its branching degree and thus producing diblock, triblock (that can be seen as two-armed star), tri-armed star and tetra-armed star structures. The PEG block, on the contrary, was kept constant (linear PEG2000).Although all the polymers exhibited a qualitatively similar lyotropic behaviour, an increased degree of branching of the hydrophobic block caused clear differences in the rheology of lyotropic phases, with an increasingly softer character, and in the organisation of the PEG chains, which appeared to adopt possibly more extended and dehydrated conformations.     

Behavior of free radical transfer between aqueous phase and latex particles in emulsion polymerization

The free radical transfer between aqueous phase and latex particles was investigated in the seeded emulsion polymerization using potassium persulfate (KPS) as an initiator. The effects of seed particle size, initiator concentration and polymerization temperature on the radical entry into and/or exit from the particles were emphatically examined. The results suggest that the aqueous-phase radical entry into the particles should be a competitive process, i.e. the competition between radical diffusion from the bulk aqueous phase to the interface of particles and its reactions in the aqueous phase determines whether it may be adsorbed into the particles or not. This implies that the reactions and properties of radicals in the aqueous phase play an essential role in particle nucleation in the emulsion polymerization.     

基于RAFT聚合策略合成功能化聚烯烃嵌段聚合物的研究进展

首先介绍了可逆加成-断裂链转移聚合（RAFT）的聚合机理及其常用的RAFT试剂,并与其它两种活性可控自由基聚合[氮氧化合物媒介的自由基聚合（NMP）和原子转移自由基聚合（ATRP）]进行了简单的优缺点对比。其次,介绍了近些年在基于RAFT聚合制备功能化聚烯烃嵌段聚合物研究中取得的进展,重点综述了制备功能化聚烯烃嵌段聚合物时所采用的6种方法,包括①烯烃配位聚合与RAFT聚合相结合;②阴离子聚合与RAFT聚合相结合;③阳离子聚合与RAFT聚合相结合;④Click反应与RAFT聚合相结合;⑤开环聚合与RAFT聚合相结合;⑥叶立德活性聚合与RAFT聚合相结合。最后,对基于RAFT聚合策略设计合成功能化聚烯烃嵌段聚合物的研究前景与实际应用进行了展望。     

Poly(N-tert-butyl acrylamide-b-N-acryloylmorpholine) amphiphilic block copolymers via RAFT polymerization: Synthesis, purification and characterization

Amphiphilic block copolymers consisting of two poly(acrylamide) derivative blocks have been synthesized via the reversible addition fragmentation chain transfer (RAFT) polymerization process with a hydrophobic block, poly(N-tert-butyl acrylamide), poly(TBAm), and a non-ionic hydrophilic one, poly(N-acryloylmorpholine), poly(NAM). Both polymerization orders, poly(TBAm-b-NAM) and poly(NAM-b-TBAm), were compared in terms of conversion and control over molecular weights (MW). Purification of the block copolymers was carried out via several methods in order to optimize their subsequent characterization. ¹H NMR analysis resulted in an accurate determination of the second block MW whereas determination of the CMC by the pendant drop method confirmed the ability of the poly(TBAm-b-NAM) block copolymers to self-assemble into micelles in aqueous phase.     

The amphiphilic block copolymers of 2-(dimethylamino)ethyl methacrylate and methyl methacrylate: Synthesis by atom transfer radical polymerization and solution properties

Amphiphilic di- and tri-block copolymers of poly(methyl methacrylate) (PMMA) and poly(2-dimethylamino)ethyl methacrylate (PDMAEMA) have been synthesized by atom transfer radical polymerization (ATRP) at ambient temperature (35 °C) in the environment-friendly solvent, aqueous ethanol (water 16 vol%) using CuCl/o-phenanthroline as the catalyst. The PDMAEMA blocks are contaminated with ethyl methacrylate (EMA) residues to the extent of 1-2 mol% of DMAEMA depending on the length of the PDMAEMA block. The EMA forms through the autocatalyzed ethanolysis of the DMAEMA monomer and undergoes random copolymerization with the latter. The rate of ethanolysis is unexpectedly greater in the aqueous ethanol than in neat ethanol, which has been attributed to the higher polarity of the former than of the latter. In contrast to the ethanolysis no hydrolysis of DMAEMA in the aqueous ethanol medium could be detected for 133 h. The block copolymers form micelles in water. Their solubility and CMC in neutral water have been studied. Dynamic light scattering (DLS) studies reveal that for a fixed degree of polymerization (DP) of the PMMA block the hydrodynamic diameter of the micelles in methanolic water (water 95 vol%) increases at a faster rate with the DP of the PDMAEMA block when it is much greater than that of the PMMA block compared to when it is less than or close to that of the latter.     

Honeycomb structured porous films from amphiphilic block copolymers prepared via RAFT polymerization

The synthesis of polystyrene-block-poly(N,N-dimethylacrylamide) (PS-b-PDMA) via RAFT polymerization was investigated in detail. Two different RAFT agents - benzyl dithiobenzoate and 3-(benzylsulfanylthiocarbonylsufanyl) propionic acid, were employed to prepare polystyrene macroRAFT agents with molecular weights varying between 3000 g mol⁻¹ and 62,000 g mol⁻¹ and polydispersities between 1.1 and 1.4. Chain extensions with N,N-dimethylacrylamide (DMA) were carried out using a constant monomer to RAFT agent concentration ([DMA]/[RAFT] = 500), to compare the rate of polymerization in dependency of the polystyrene chain length. A decreasing rate of polymerization with increasing block length was observed. Depending on the sizes of the first block and type of RAFT agents used, chain extension polymerization with DMA was found to be incomplete, leading to significant low molecular weight tailing in the GPC analyses. Block copolymers prepared using 3-(benzylsulfanylthiocarbonylsufanyl) propionic acid, followed the expected molecular weight evolutions with polydispersity indices of 1.2-1.4. In contrast, block copolymers using benzyl dithiobenzoate clearly showed bimodal molecular weight distributions, especially when the longest PS macroRAFT agent with a molecular weight of 38,000 g mol⁻¹ was employed. These amphiphilic block copolymers were used to fabricate honeycomb structured porous films using the breath figure technique. The regularity of the film was considerably influenced by the humidity of the environment, which could be controlled by the rate of the airflow or the humidity in the casting chamber. The interaction between the hydrophilic block copolymer and the humidity was found responsible for the delicate equilibrium during the casting process, which prevented high pores regularity at very low (below 50%) and at elevated (above 80%) humidity. The interactions of the hydrophilic block with the humidity were observed to superimpose an additional nano-scaled order onto the hexagonal micron-sized porous array. Pores, which are created by encapsulation of water droplets, were found to be more hydrophilic than the surface. Confocal microscopy studies were employed to locate hydrophilic blocks within the film using a fluorescence labeled PDMA polymer.     

乳液聚合中乳胶粒粒径大小及分布的影响因素

在乳液聚合中,乳胶粒的大小及分布对乳液的性能及其应用有很大的影响,同时也反映了乳液聚合反应进行的过程。本文综述了影响乳胶粒粒径大小及分布的各种因素,如聚合工艺、乳化剂、单体种类、聚合温度、引发剂等,并介绍了不同粒径乳液的性能及其应用。     

Tailored surface properties of semi-fluorinated block copolymers by electrospinning

Diblock copolymers based on polystyrene (PS) macroinitiators and four different fluorinated monomers (perfluorooctyl ethyl methacrylate (FMA), pentafluorostyrene (FS), perfluorooctyl-ethylene oxymethyl styrene (EMS), 2,3,5,6-tetrafluoro-4-(3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10,10-heptadecafluorodecaoxy)styrene (FSF)) were synthesized via atom transfer radical polymerization (ATRP). The lengths of the PS and fluorinated blocks were altered and the surface and self-assembling properties of the polymers were compared with respect to the fluorinated monomer used and the fluorine content. The surface properties, contact angles and surface tension, were enhanced by the existence of the CF₃ groups at the end of the alkyl chains compared with poly(pentafluorostyrene). Hydrophobicity of the surfaces was further enhanced by electrospinning the polymer solutions, which yielded superhydrophobic surfaces with water contact angles >150° for polymers having CF₃ groups.