H NMR study of thermotropic phase transitions in D2O solutions of poly(N-isopropylmethacrylamide)/poly(vinyl methyl ether) mixtures

¹H NMR spectroscopy was used to investigate thermotropic phase transitions in D₂O solutions of poly(N-isopropylmethacrylamide) (PIPMAm)/poly(vinyl methyl ether) (PVME) mixtures. In all studied solutions (polymer concentrations c=0.1-10 wt%) two phase transitions were detected at temperatures roughly corresponding to different lower critical solution temperatures of PIPMAm and PVME. While the phase transition of PVME component (located at lower temperatures) is not affected by the presence of PIPMAm in the mixture, the phase transition temperatures of PIPMAm component (located at higher temperatures) are affected by the phase separation of the PVME component. Measurements of ¹H spin-spin relaxation of residual water (HDO) molecules revealed that above the phase transition, a certain portion of water molecules is bound to polymer globular structures. A major part of bound water is present in globular structures of predominating polymer component in the mixture.     

Effect of time on the hydration and temperature-induced phase separation in aqueous polymer solutions. H NMR study

Dehydration during temperature-induced phase separation in D₂O solutions of poly(vinyl methyl ether) (PVME), poly(N-isopropylmethacrylamide) (PIPMAm) and poly(N-isopropylacrylamide) (PIPAAm) was followed from time dependences of NMR spin-spin relaxation times T₂ of HDO. Both the time characterizing the exclusion of the water from mesoglobules (manifested by the increase in T₂ values) and the induction period which precedes the increase in T₂ values, increased in the order PVME < PIPMAm < PIPAAm. For D₂O solutions of PIPMAm/PVME (or PIPMAm/PIPAAm) mixtures a direct connection between the state of the mesoglobules (hydrated or dehydrated) formed by the component with lower LCST (PVME, PIPAAm) and the temperatures of the phase transition of the PIPMAm component was established by NMR spectroscopy.     

1H NMR study of temperature-induced phase transitions in aqueous solutions of poly(N-isopropylmethacrylamide)/poly(N-vinylcaprolactam) mixtures

¹H NMR spectroscopy was used to investigate the temperature-induced phase transitions in aqueous solutions of poly(N-isopropylmethacrylamide)/poly(N-vinylcaprolactam) (PIPMAm/PVCL) mixtures to find out if the phase transition of the given component (PIPMAm or PVCL) is affected by the presence of the second component. Our results that PVCL and PIPMAm transitions are in polymer mixtures shifted by ~2 K towards higher temperatures in comparison with neat polymers and depend on polymer concentration show that such effect exists. Spin–spin relaxation times of water (HDO) indicate that in solutions with c ≥ 1 wt% a portion of water is predominantly bound in PVCL mesoglobules even at temperatures above the LCST transition of PIPMAm component. Water is with time released from these mesoglobules without any induction period so indicating that it is mostly indirectly bound water. We assume that there is a direct connection between character of the bound water and the transition temperatures.     

Control of the lower critical solution temperature—type cononsolvency properties of poly(N-isopropylacrylamide) in water—dioxane mixtures through copolymerisation with acrylamide

The behaviour of the homopolymers poly(N-isopropylacrylamide) (PNIPAM), polyacrylamide (PAM) and random copolymers of N-isopropylacrylamide (NIPAM) with acrylamide (AM) was studied by turbidimetry and viscometry in mixtures of water with dioxane. It was found that the well-known lower critical solution temperature-type cononsolvency properties of PNIPAM in water-dioxane mixtures, observed in the water-rich region, can be effectively controlled by copolymerisation of NIPAM with AM. Thus, the cononsolvency properties of the copolymers in water-dioxane mixtures are shifted to higher temperatures and restricted within a narrower solvent composition region as the acrylamide content of the copolymers increases. A significant decrease of the reduced viscosity of the systems exhibiting phase separation properties was observed upon heating, indicative of the collapse of the (co)polymer chains as temperature approaches the corresponding cloud point temperature. Furthermore, when temperature is fixed close to the cloud point temperature, the reduced viscosity decreases with increasing the volume fraction of dioxane, φ, as far as the solvent mixtures are rich in water. On the contrary, the reduced viscosity of PNIPAM in dioxane-rich mixtures is found significantly higher, indicative of an expansion of the polymer chain, as compared to the reduced viscosity of this polymer in the two pure solvents.     

Thermo-, and pH dual-responsive poly(N-vinylimidazole): Preparation,characterization and its switchable catalytic activity

A monomer, 2-(isobutyramido)-3-methylbutyl methacrylate (IMMA) was synthesized through a two-step reaction. When a few of IMMA (less than 4 mol%) was copolymerized with N-vinylimidazole (VIm) under free radical polymerization condition, water-soluble P(VIm-co-IMMA) copolymers were obtained. Their structural information was verified and interpreted from ¹H NMR, FTIR and GPC. Kinetic analyses from ¹H NMR demonstrated that one-batch addition of IMMA into the polymerization system led to an inhomogeneous distribution of IMMA units in the copolymers, whereas homogeneous distribution of IMMA units in the copolymers could be obtained through the portion-wise addition of IMMA monomer. The thermal properties of such copolymers were measured by DSC. Compared with PVIm homopolymer, the few IMMA units in the P(VIm-co-IMMA) copolymer had little influence on the T_g values. The obtained P(VIm-co-IMMA) copolymers were thermoresponsive in water, and their phase transition temperatures could be efficiently raised through reducing the IMMA content in the copolymers, raising the addition times of IMMA monomers or lowering the pH of media. Dynamic light scattering analysis showed that unlike the traditional thermoresponsive linear polymers, obvious size shrinkage around the phase transition temperature could not be observed in such P(VIm-co-IMMA) copolymers. Such copolymers could be used as smart organocatalysts in the hydrolysis of p-nitrophenyl acetate. Below the phase transition temperature the reaction rate followed the Arrhenius law, but above the phase transition temperature the reaction rate increased much slower than the prediction from the Arrhenius law. Moreover, the catalytic transition temperature could be tuned through utilizing the P(VIm-co-IMMA) copolymers with different phase transition temperature. The mechanism was discussed accordingly.     

Thermal transitions of poly(N-isopropylmethacrylamide) in aqueous solutions

Thermal transitions of poly(N-isopropylmethacrylamide) (PIPMAm) in aqueous solutions were studied in a wide temperature range from −100 to 60 °C. The solutions of different polymer weight fractions (c=0.03-1) were investigated in cooling and heating scans of differential scanning calorimetry; four qualitatively different kinds of thermograms were identified in dependence of the fraction, c. The transitions are explained in a thermodynamic framework based on the phase diagram of the system. This diagram provides a complete understanding of thermal transitions in aqueous PIPMAm solutions as a function of c, in particular the existence of non-crystallizable water and the temperature induced phase transition that is due to the hydrophobic interaction in PIPMAm solutions.     

Upper critical solution temperature—type cononsolvency of poly(N,N-dimethylacrylamide) in water—organic solvent mixtures

The behaviour of linear poly(N,N-dimethylacrylamide) (PDMAM) chains was studied by turbidimetry and viscometry in mixtures of water with the polar organic solvents methanol, dioxane and acetone. The swelling-deswelling behaviour of PDMAM gels in the same solvent mixtures was also investigated. Contrary to the behaviour in water-methanol mixtures, in water-dioxane and water-acetone mixtures a significant shrinkage of polymer chains and deswelling of polymer gels, followed by phase separation, was observed for high organic solvent fractions. Cononsolvency phenomena were found to be temperature-dependent, as demixing occurred upon decreasing temperature. This upper critical solution temperature (UCST) phase separation behaviour in mixed solvents was studied by turbidimetry and compared to the well-known lower critical solution temperature (LCST) behaviour of poly(N-isopropylacrylamide) (PNIPAM) in similar solvents mixtures.     

Copolymers of N-alkylacrylamides and styrene as new thermosensitive materials

New thermosensitive copolymers were obtained by copolymerization of styrene with N-methylacrylamide, N-ethylacrylamide or N,N-dimethylacrylamide. The turbidity measurements showed that these polymers can undergo a thermally induced phase transition at various temperatures, depending on their chemical composition, molecular weight and concentration in water. Fluorescence measurements indicated the occurrence of aggregation through hydrophobic interactions even below the lower critical solution temperature. The enthalpy and cooperativity of phase transition determined by microcalorimetry were strongly dependent on the chemical structure of the N-alkylacrylamide comonomer.     

Molecular thermodynamic analysis for phase transitions of linear and cross-linked poly(N-isopropylacrylamide) in water/2-propanol mixtures

Ternary liquid–liquid phase transitions of linear poly(N-isopropylacrylamide) (PNIPA) and the swelling behavior of cross-linked PNIPA gels in water/2-propanol mixtures were investigated using thermo-optical analysis (TOA) and a photon correlation spectroscopy (PCS) technique, respectively. Closed immiscibility gaps in ternary phase diagrams were obtained below 35 °C although all binary mixtures involved in this system were completely miscible. At a fixed concentration of PNIPA (1.0 wt%), a decrease in the lower critical solution temperature (LCST) occurred first, and with an increasing 2-propanol fraction of the solvent mixture, the upper critical solution temperature (UCST) subsequently developed. Corresponding to the linear PNIPA solution behavior, swollen PNIPA gels in pure water first shrank and then reswelled with increasing 2-propanol content in a typical reentrant transition. For theoretical treatment of the mixtures, a multi-component lattice theory of mixing and Flory–Rehner chain model for elasticity were employed for molecular thermodynamic analysis. A secondary lattice concept of specific interactions was used to model binary water/PNIPA solutions, and a temperature dependence of the intermolecular interactions for 2-propanol/PNIPA was used to describe island type ternary phase diagrams. The swelling transitions of cross-linked PNIPA gels were calculated using model parameters obtained from the ternary phase diagrams of linear PNIPA or from experimental conditions. The predicted results were in good agreement with experimental data without the need for further adjustable parameters.     

Controllable synthesis of poly(N-vinylpyrrolidone) and its block copolymers by atom transfer radical polymerization

At room temperature atom transfer radical polymerization (ATRP) of N-vinylpyrrolidone (NVP) was carried out using 5,5,7,12,12,14-hexamethyl-1,4,8,11-tetra-azacyclo-tetradecane (Me₆Cyclam) as ligand in 1,4-dioxane/isopropanol mixture. Methyl 2-chloropropionate (MCP) and copper(I) chloride were used as initiator and catalyst, respectively. The polymerization of NVP via ATRP could be mediated by the addition of CuCl₂. The resultant poly(N-vinylpyrrolidone) (PNVP) has high conversion of up to 65% in 3 h, a controlled molecular weight close to the theoretical values and narrow molecular weight distribution between 1.2 and 1.3. The living nature of the ATRP for NVP was confirmed by the experiments of PNVP chain extension. With PNVP-Cl as macroinitiator and N-methacryloyl-N′-(α-naphthyl)thiourea (MANTU) as a hydrophobic monomer, novel fluorescent amphiphilic copolymers poly(N-vinylpyrrolidone)-b-poly(N-methacryloyl-N′-(α-naphthyl)thiourea) (PNVP-b-PMANTU) were synthesized by ATRP. PNVP-b-PMANTU copolymers were characterized by ¹H NMR, GPC-MALLS and fluorescence measurements. The results revealed that PNVP-b-PMANTU presented a blocky architecture.     

On the water swelling behaviour of poly(N-isopropylacrylamide) [P(N-iPAAm)], poly(methacrylic acid) [P(MAA)], their random copolymers and sequential interpenetrating polymer networks (IPNs)

Thermo- and pH-responsive stimuli hydrogels based on N-isopropylacrylamide (N-iPAAm) and methacrylic acid (MAA) have been synthesized and their swelling behaviour studied as a function of composition, pH and temperature. Copolymers varying in composition have been obtained by copolymerizing these two monomers and interpenetrating polymer networks (IPNs) of P(MAA) and P(N-iPAAm) by the sequential method. Temperature and pH have been changed in the ranges from 25 to 40 °C and from 2 to 9, respectively. The swelling behaviour of the hydrogels depends on the nature of the polymer and the environmental conditions, namely pH and temperature. Copolymer gels under basic conditions exhibit higher degree of swelling than the homopolymer ones. The disruption of the complexes dominates the kinetic swelling of MAA enriched gels under basic conditions. The hydrogen bond formation between carboxyl and amide groups has been made clear through the dynamic swelling behaviour of copolymers under acidic conditions. IPNs reduce their ability to swell in water with increasing P(N-iPAAm) content because of the formation of hydrophobic interpolymer complexes through hydrogen bonding. Lower critical solution temperature occurs only in the enriched N-iPAAm copolymers under acidic conditions when the MAA carboxyl groups are unionized.     

Influence of the swelling history on the swelling kinetics of stimuli-responsive poly[(N-isopropylacrylamide)-co-(methacrylic acid)] hydrogels

The influence of the swelling history on the swelling behavior of poly[(N-isopropylacrylamide)-co-(methacrylic acid)] P[(N-iPAAm)-co-(MAA)] random copolymers hydrogels synthesized by free radical polymerization in solution of N-iPAAm and MAA comonomers crosslinked with tetraethylene glycol dimethyl acrylate (TEGDMA) has been studied. The swelling behavior under pH 7 at 18, 29, 39 and 49 °C of this series of copolymers, previously soaked either at pH 2 or 7 has been investigated. The swelling kinetics of these two series of samples displays different behavior as function of the composition and temperature. However, the equilibrium swelling values only show slight dependences on the previous soaking pH and temperature. When samples are soaked at pH 7, then the swelling at pH 7 follows a first order kinetics, irrespective of the copolymer composition or the temperature at which the experiment has been carried out. In this case, the swelling process is very fast and depends only slightly on temperature. The first order rate constant increases with the MAA content in the hydrogel. Furthermore, the swelling rate of copolymer hydrogels soaked at pH 2, show strong dependence on composition and temperature. They follow an autocatalytic swelling kinetics due to the disruption of hydrogen bond arrangements. An initial slow water uptake is followed by an acceleration process, in which water molecules inside the gel help the next water molecules to come in. Two rate constants, a first-order rate constant and an autocatalytic one have been obtained from the kinetics analysis. They have revealed different temperature dependence which may be due to a balance between hydrophobic and hydrogen bond interactions. The temperature dependence of the swelling kinetics is stronger and more complex for copolymers treated under pH 2 than for copolymers soaked under pH 7.     

Toward an understanding of thermoresponsive transition behavior of hydrophobically modified N-isopropylacrylamide copolymer solution

Poly(N-isopropylacrylamide-co-vinyl laurate)(PNIPAAm-co-VL) copolymers were prepared at various feed ratios via conventional radical random copolymerization. The formation, composition ratios and molecular weight of copolymers were examined. The thermoresponsive behaviors of PNIPAAm and PNIPAAm-co-VL solutions at low and high concentrations were intensively investigated by turbidity measurement, Micro-DSC, temperature-variable state fluorescence, ¹H NMR and dynamic light scattering (DLS). Several important results were obtained that (1) incorporation of PVL results in much lower and broader LCST regions of the copolymer solutions, and facilitates the formation of hydrophobic microdomains far below LCST, causing a pronounced aggregation in solutions (2) temperature-variable ¹H NMR spectra shows that during the phase transition, the ‘penetration’ of PNIPAAm into the hydrophobic core is a process accompanied with a transition of isopropyl from hydration to dehydration as well as a self-aggregation of hydrophobic chains at different temperature stages (3) according to the ¹H NMR spectra of polymer solutions obtained at varied temperatures, the microdomains from hydrophobic VL moieties have a different accessibility for isopropyl groups and the entire chains during phase transition (4) temperature-variable DLS demonstrates that the temperature-induced transition behavior of copolymers is supposedly divided into three stages: pre-LCST aggregation (<20 °C), coil-globule transition at LCST (20-25 °C) and post-LCST aggregation (>25 °C).     

Photo cross-linkable poly(N-isopropylacrylamide) copolymers III: micro-fabricated temperature responsive hydrogels

Micro-fabricated temperature responsive poly(N-isopropylacrylamide) (PNIPAAm) hydrogels were produced by photolithographic patterning of photo cross-linkable polymers. These polymers were synthesized by copolymerization of N-isopropylacrylamide (NIPAAm) and 2-(dimethyl maleimido)-N-ethyl-acrylamide (DMIAAm). The patterning process of polymers with 9.2 mol% DMIAAm and film thickness below 5 μm in the dry state was able to depict a lateral resolution of 4 μm with insignificant shape change. In order to increase the adhesion of the swollen hydrogels, and thus, the resolution of a particular pattern, a special adhesion promoter based on a monochlorosilane anchor group and a chromophore head group was synthesized. If a silicon wafer surface was pretreated with the adhesion promoter, the structures were stable and well adhered even at lower cross-linking densities. The hydrogels are suitable as working substances for micro-actuators because of their thermally induced volume changes. The swelling ratio of the pattern at low temperatures increased with a decreased cross-linking density. As expected from the chemical composition of the gels, the phase transition temperature (T_c) decreased with increasing DMIAAm content. The swelling of microstructures in water in comparison to macroscopic objects occured significantly faster. This behavior was attributed to the small gel dimension but it was even more pronounced because of the sponge-like nanostructure of the hydrogels characterized by high-resolution field emission scanning electron microscopy. Suitable applications of these hydrogels are adjusting limbs in fluid micro-systems such as micro-pumps and micro-valves.     

Synthesis and properties of thermosensitive, crown ether incorporated poly(N-isopropylacrylamide) hydrogel

A crown ether derivative (4′-allyldibenzo-18-crown-6, CE) was covalently incorporated into the network of temperature sensitive poly(N-isopropylacrylamide) (PNIPA) hydrogels by copolymerization in a mixed solvent of water and tetrahydrofuran (H₂O/THF). The poly(N-isopropylacrylamide-co-4′-allyldibenzo-18-crown-6) (poly(NIPA-co-CE)) hydrogels exhibited dramatically faster deswelling rates than normal PNIPA hydrogels at a temperature (50 °C) above their lower critical solution temperatures. The effect of the solvent component ratio in the mixed solvent during the copolymerization on the swelling properties of the poly(NIPA-co-CE) hydrogel was investigated. The thermosensitive poly(NIPA-co-CE) hydrogels have potential applications in the extraction of cations and separation of chiral drugs.     

Thermo- and pH-sensitivity of aqueous poly(N-vinylpyrrolidone) solutions in the presence of organic acids

The phase transition in poly(N-vinylpyrrolidone) (PVP) aqueous solutions is shown to occur at heating upon addition of organic acids such as isobutyric, isovaleric, and, especially, trichloroacetic (TCA) ones. The cloud point temperature (T_c) of PVP solutions drops from 70 to 6 °C when the TCA concentration rises from 0.2 to 0.3 mol/l. A decrease in T_c is even more drastic when HCl is also added though HCl addition to the system without TCA does not result in phase separation. These phenomena are explained by the reversible coordination between the non-ionized form of TCA and PVP units via hydrogen bonding. An increase in the medium acidity depresses TCA dissociation, resulting in an increase in PVP-TCA associate concentration. Calculations based on the pK_a values of TCA confirm this suggestion. The similar behavior is observed with poly(N-vinylcaprolactam) systems. The amount of TCA bound to PVP has been determined by means of separation of the precipitate by centrifugation at temperatures above T_c and subsequent titration of TCA in the polymer with NaOH. It is shown that the precipitate contains one TCA molecule per 3-6 VP units, this value decreasing down to 1.25-2 upon HCl addition to the system.     

Synthesis and thermo-responsive behavior of fluorescent labeled microgel particles based on poly(N-isopropylacrylamide) and its related polymers

Poly(N-isopropylacrylamide) (PNIPAM) microgel particles labeled with 3-(2-propenyl)-9-(4-N,N-dimethylaminophenyl)phenanthrene (VDP) as an intramolecular fluorescent probe were prepared by emulsion polymerization. The thermo-responsive behavior of the VDP-labeled PNIPAM microgel particles dispersed in water was studied by turbidimetric and fluorescence analyses. The transition temperature of the VDP-labeled PNIPAM microgel particles in water determined by turbidimetric analysis was ca. 32.5 °C. The wavelength at the maximum fluorescence intensity of the VDP units linked directly to the microgel particles dramatically blue-shifted around the transition temperature. In addition it gradually blue-shifted even below the transition temperature where there was no change observed in the turbidity. These findings suggest that the gradual shrinking of microgel particles occurs with increasing temperature and the subsequent dramatic shrinking results in the increasing in the turbidity. The transition temperatures of VDP-labeled poly(N-n-propylacrylamide) and poly(N-isopropylmethacrylamide) microgel particles determined by turbidimetric analysis were ca. 23 and ca. 42.5 °C, respectively, and their thermo-responsive behavior was similar to that for the VDP-labeled PNIPAM system. In these three systems the microenvironments around the fluorescent probes above the transition temperatures became more hydrophobic than those below the transition temperature, and the estimated values of microenvionmental polarity around the VDP units on their collapsed states were almost the same.     

Collapse kinetics for individual poly(N-isopropylmethacrylamide) chains

The kinetics for the coil-to-globule transition of linear poly(N-isopropylmethacrylamide) (PiPMA) chains has been studied by use of the fluorescence and Rayleigh scattering with a fast laser pulse infrared heating. We have observed the two-stage kinetics in the collapse transition with the characteristic relaxation times, τ_fast and τ_slow, which are attributed to the nucleation and growth of pearls on the chain and the merging and coarsening of pearls to a globule, respectively. The collapse kinetics of PiPMA is similar to that of poly(N-isopropylacrylamide) which has one less methyl in each monomeric unit, indicating that the additional methyl groups in PiPMA chains slightly influence the kinetics. In other words, the pearls are not completely coarsened to form compact globules within τ_slow.     

Aggregation of biodegradable amphiphilic poly(succinimide-co-N-propyl aspartamide) and poly(N-dodecyl aspartamide-co-N-propyl aspartamide) in aqueous medium and its preliminary drug-released properties

Two series of biodegradable amphiphilic copolymers, poly(succinimide-co-N-propyl aspartamide) (PSI-PA) and poly(N-dodecyl aspartamide-co-N-propyl aspartamide) (PDDA-PA) were synthesized by partial and total aminolysis of polysuccinimide (PSI), respectively. PSI-PA copolymers could self-aggregate in water directly under ultrasonication at room temperature. Differing from PSI-PA copolymers, the aggregates of PDDA-PA need to add PDDA-PA DMF solution into an excessive amount of water. The aggregative properties of PSI-PA and PDDA-PA copolymers have been investigated by dynamic light scattering (DLS) and surface tension measurements. Hydrophilicity of these two copolymers was attributed to the N-propyl aspartamide segments. Due to the stiff structure, succinimide segments preferred to form irregular hydrophobic microdomains, and some aggregates of PSI-PA are bimodal size distribution in water medium, while the more flexible PDDA-PA copolymer chains preferred to form monodispersed spherical aggregates. Elevated temperature could reduce the aggregate size of both PSI-PA and PDDA-PA copolymers due to the breaking of the hydrogen bonding and the releasing of the bonded water molecules. PSI-PA copolymers were surface active, while the surface tension of PDDA-PA copolymers was independent on concentration. The drug-loaded aggregates of PSI-PA also have been prepared and the preliminary release properties have been studied in vitro.     

Poly[N-(2-hydroxypropyl)methacrylamide-block-n-butyl acrylate] micelles in water/DMF mixed solvents

Three diblock copolymers of poly[N-(2-hydroxypropyl)methacrylamide] (poly(HPMA)) and poly(n-butyl acrylate) (poly(BA)) with varying lengths of blocks were prepared by atom transfer radical polymerization. All copolymers were found to be soluble in dimethylformamide (DMF) and poorly soluble or insoluble in water. In water and mixed DMF/H₂O solvents, the copolymers were dispersed in micellar form by controlled addition of water to DMF solutions of copolymers under continuous intensive stirring. The micellar solutions in water were prepared by dialysis of solutions in DMF/H₂O (95 vol% of H₂O) against water. Solution properties of diblock copolymers of poly(HPMA) and poly(BA) were studied using static and dynamic laser light scattering to characterize the behavior of the copolymers at the supramolecular level. The effects of preparation mode, organic solvent (DMF) and copolymer chemical composition on the formation of micelles were studied. While a slower mixing procedure was optimal for copolymers with short poly(HPMA) blocks, a faster mixing was more suitable for copolymers having longer poly(HPMA) blocks. Finally, the dimensions of micelles in water were evaluated. The most compact micelles were prepared from copolymers having short hydrophilic poly(HPMA) blocks. On the other hand, the copolymer with the longest poly(HPMA) block formed micelles with the smallest size and the lowest density.