共查询到17条相似文献,搜索用时 125 毫秒
1.
2.
3.
4.
5.
巴西 CVRD矿具有含铁品位高、有害杂质少、烧结性能良好的特点。采用 CVRD矿作为烧结配矿的主矿 ,经合理配比和优化工艺参数 ,烧结生产率提高 ,烧结矿质量改善 ,冶金性能提高 相似文献
6.
7.
8.
9.
10.
为提高烧结矿品位,在首钢拟定烧结原料结构条件下,采用烧结杯制备烧结试样,进行配加巴西精粉的烧结杯实验,应用转鼓测试强度、光学显微镜和X射线衍射分析显微结构和矿相组成,研究了巴西精粉配比的增加对烧结矿技术指标的影响,重点探讨其与烧结质量的相关性。试验结果表明,提高巴西精粉的配比可以提高烧结矿的品位,使烧结矿品位保持在一个较高的水平(达55%以上);选取巴西精粉和印度粉配比的合理范围对提高烧结质量是非常必要的。 相似文献
11.
首先测定巴西、澳洲及中国的10种铁矿粉的高温特性,将其与实际生产统计所得的高温特性适宜区间比较可知:巴西矿的同化性偏低,澳洲矿偏高,中国精粉则相对接近适宜区间;有两种巴西矿、一种澳洲矿以及一种中国精粉的液相流动性适宜,一种巴西矿、一种澳洲矿以及两种中国精粉则偏低,一种澳洲矿和一种中国精粉的液相流动性稍高;澳洲矿的黏结相自身强度偏低,巴西矿和中国精粉则较为适宜,且中国精粉相对更高.在实验研究的基础上,提出基于铁矿粉高温特性互补而使混合矿高温特性指标适宜的烧结配矿新思路,并设计优化配矿方案,烧结杯实验结果显示均获得优良的烧结指标,证实了基于铁矿粉高温特性进行配矿的优越性. 相似文献
12.
CAO Yong-guo WU Sheng-li HAN Hong-liang WANG Hong-wei XUE Fang LIU Xiao-qin 《钢铁研究学报(英文版)》2011,18(9):1-5
Pilbara blending iron ore powder (PB powder) is blending ores with good and poor quality iron ores, so how to use PB power effectively is a problem. The self-characteristics of PB powder and its single-components were studied respectively, such as the macroscopic properties, microscopic properties, and high-temperature properties; the behavior and effect in the sintering were mastered. Then based on the new ore-proportioning idea of iron ores sintering characteristics complementary, the principles on the effective use of PB powder were discussed, and was further validated through the sintering pot test and industrial production. The results show that: PB powder is composed of three kinds of iron ore, and the sintering characteristics of different iron ores are obviously discrepant. With the ore-proportioning optimization based on the iron ores sintering characteristics complementary, the proportion of PB iron ore powder can be increased to more than 45%. 相似文献
13.
为了研究某钢铁企业常用铁矿粉基础特性之间的关系,优化烧结配矿,采用微型烧结法对其常用铁矿粉的烧结基础性能进行了试验研究,包括铁矿石的同化性、液相流动性、黏结相强度及铁酸钙生成能力。结果表明,澳金布巴粉同化温度最低,其同化性最强;巴西1SSFT同化温度最高,其同化性最弱。南非库伯粉液相流动性最好,澳纽曼粉流动性最差。澳金布巴粉黏结相强度最高,加拿大粉最低,澳纽曼粉铁酸钙生成能力最强,巴西2BRBF铁酸钙生成能力最弱。通过对某钢铁企业常用8种铁矿粉的基础特性研究,进行基础特性优化互补的配矿烧结杯试验,为烧结厂优化配矿提供依据。 相似文献
14.
In order to obtain good sintering performance, it is important to understand sintering properties of iron ores. Sintering properties including chemical composition, granulation and high-temperature behaviors of ores from China, Brazil and Australia. Furthermore, several indices were defined to evaluate sintering properties of iron ores. The results show that: for chemical composition, Brazilian ores present high TFe, low SiO2, and low Al2O3 content. For granulation, particle diameter ratio of Brazilian ores are high; particle intermediate fraction of Chinese concentrates are low; and average particle size and clay type index of Australian ores are high. For high-temperature properties, ores from China, Brazil and Australia present different characteristics. Ores from different origins should be mixed together to obtain good high-temperature properties. According to the analysis of each ore′s sintering properties, an ore blending scheme (Chinese concentrates 20%+Brazilian ores 40%+Australian ores 40%) was suggested. Moreover, sinter pot test using blending mix was performed, and the results indicated that the ore blending scheme led to good sintering performance and sinter quality. 相似文献
15.
随着鞍钢自产铁精矿供应量逐年减少,扩大进口矿用量成为必然。本文根据鞍钢炼铁总厂烧结车间和西区烧结车间的原料条件,在实验室进行了配加巴西南部粉矿的烧结杯试验研究。结果表明:(1)配加巴西粉矿后超过20%后,烧结矿的转鼓强度下降幅度明显。随着巴西南部粉矿配比增加,垂直烧结速度增大,利用系数提高,燃耗略有提高。(2)相同配比条件下,配矿C方案时烧结矿转鼓要高于A、B方案,但烧结速度较慢、烧结机利用系数低,烧结燃耗增加。(3)配加巴西粉矿后超过20%后,烧结矿的低温还原粉化趋于严重。相同配比条件下,配矿C方案时烧结矿低温还原粉化最优。据此认为:采用巴西南部粉矿配比不超过20%时,可获得较好的烧结指标。工业应用中应避免采用B配矿方案。 相似文献
16.
17.
Bu-xin SU Jian-liang ZHANG Da WANG Jiu-gang SHAO Shan REN Guang-wei WANG 《钢铁研究学报(英文版)》2013,20(9):8-15
Assimilation behaviors of 7 kinds of iron ores from Australia, Brazil, India, South Africa and China were evaluated and analyzed. On the basis of that, four ore blending principles were proposed, and seven groups of iron ore powder blending schemes were designed. The ores of different types or from different places are shown apparently different in assimilation. The assimilation of hematite in Australia, Brazil and India is relatively high, but the assimilation of magnetite in South Africa and China and specularite in China is relatively low. The assimilation of the ores has negative correlation with MgO content and binary basicity, while the assimilation of the ores has positive correlation with porosity, SiO2 and Al2O3 contents, and crystal water. The iron ores with smaller crystal size and microstructure looseness have relatively higher assimilation. Assimilation of mixed ores has relationship of linear, arch and “S” types to the ratio of single iron ore powder. When the charge ratio of ore is less than 25%, it possesses additivity, providing theoretical basis for optimization of ore matching. 相似文献