Improved Approaches for Cost-Effective Traffic Grooming in WDM Ring Networks: Uniform-Traffic Case*

To fully utilize the capabilities of a SONET/ADM network, traffic grooming is needed to multiplex a number of lower-rate traffic streams into a higher-rate stream, and vice versa. Although the capacity of a SONET ring network can be upgraded by operating it over multiple wavelengths, the corresponding network design may be costly if it employs a large number of ADMs. A cost-effective design attempts to minimize the total number of ADMs used in the network while carrying the offered traffic. We introduce and evaluate the performance characteristics of two new traffic-grooming approaches for WDM ring networks, called single-hop and multihop. Our single-hop implementation uses the simulated-annealing heuristic. After placing all the traffic on virtual circles, we group the circles in order to reduce the number of ADMs in the network. Our multihop implementation places an ADM at each node based on the requested traffic in the traffic-demand matrix; then, it tries to groom the wavelengths which can be groomed. We select one of the nodes to be the hub node which has an ADM for each wavelength. The hub node, therefore, can bridge traffic between all of the wavelengths. Each algorithm is specified and illustrated by a simple example. Our results demonstrate that it is beneficial to use a single-hop approach based on simulated annealing for a small grooming ratio, but for a large grooming ratio and node number, we advocate the use of the multihop approach.     

Economics of “design for test” to remain competitive in the 90s

This article emphasizes the criticality of maximizing value adders and minimizing the costs of design for test (DFT) in order to remain competitive in ASIC manufacturing in the 90s.     

Mobile ATM buffer capacity analysis

This paper extends a stochastic theory for buffer fill distribution for multiple on and off sources to a mobile environment. Queue fill distribution is described by a set of differential equations assuming sources alternate asynchronously between exponentially distributed periods in on and off states. This paper includes the probabilities that mobile sources have links to a given queue. The sources represent mobile user nodes, and the queue represents the capacity of a switch. This paper presents a method of analysis which uses mobile parameters such as speed, call rates per unit area, cell area, and call duration and determines queue fill distribution at the ATM cell level. The analytic results are compared with simulation results.This paper is partially funded by ARPA contract number J-FBI-94-223.The Mathematica code for this paper can be found on http://www.tisl.ukans.edu/sbush.     

A scalable wireless virtual LAN

This paper presents a Wireless Virtual Local Area Network (WVLAN) to support mobility in IPoverATM local area networks. Mobility is handled by a joint ATMlayer handoff for connection rerouting and MAClayer handoff for location tracking, such that the effects of mobility are localized and transparent to the higherlayer protocols. Different functions, such as Address Resolution Protocol (ARP), mobile location, and ATM connection admission are combined to reduce protocol overhead and frontend delay for connectionless packet transmission in connectionoriented ATM networks. The proposed WVLAN, through the use of ATM technology, provides a scalable wireless virtual LAN solution for IP mobile hosts.     

On the Capacity of IEEE 802.11 DCF with Capture in Multipath-Faded Channels

In this paper, we estimated the influence of capture effect over the capacity of IEEE 802.11b DCF within a single picocell. The channel utilization is examined analytically by introducing two capture models based on Rayleigh-distributed envelopes of the captured and the interfering frames divided into two local-mean power classes. Simulations in a pure Rician-faded channel depict the conditions under which both Rayleigh-faded capture models can be used to accurately predict the peak network capacity. Unlike the RTS/CTS handshake access mode, Basic access mode is significantly sensitive to the capture ratio, i.e., the receiver design. The packet size threshold over which it is convenient to switch from Basic to RTS/CTS handshake access scheme is also sensitive to the capture effect.     

On the design of feedback controllers to achieve prescribed initial value constraints

The problem of designing a stabilizing compensator for a control system to achieve prescribed initial value constraints ⁽ⁱ⁾(0⁺)=y_i is considered. Indeed, modulo certain technical conditions, such a compensator exists if and only if y_i=0;i= 0,1,...,rp +rt –2; whererp is the relative degree of the plant andrt is the relative degree of the system input. This theorem is derived and a complete parameterization of the set of compensators that achieve the prescribed design constraints is formulated.This research was supported in part by NSF Grant No. 921106.     

Dynamic capacity allocation and hybrid multiplexing techniques for ATM wireless LANs

We consider digital wireless multimedia LANs and timevarying traffic rates. To deal effectively with the dynamics of the timevarying traffic rates, a Traffic Monitoring Algorithm (TMA) is deployed to dynamically allocate channel capacities to the heterogeneous traffics. The TMA is implemented as a higher level protocol that dictates the capacity boundaries within two distinct framed transmission techniques: a Framed Time DomainBased (FTDB) technique and a Framed CDMA (FCDMA) technique. The performance of the TMA in the presence of the FTDB technique is compared to its performance in the presence of the FCDMA technique for some traffic scenarios. The performance metrics used for the TMAFTDB and TMAFCDMA combinations are channel capacity utilization factors, traffic rejection rates, and traffic delays. It is found that the TMAFTDB is superior to the TMAFCDMA when the speed of the transmission links is relatively low and the lengths of the transmitted messages are relatively short. As the speed of the transmission links and the length of the transmitted messages increase, the TMAFCDMA eventually outperforms the TMAFTDB.     

Predictive Caching Strategy for On-Demand Routing Protocols in Wireless Ad Hoc Networks

Route caching strategy is important in on-demand routing protocols in wireless ad hoc networks. While high routing overhead usually has a significant performance impact in low bandwidth wireless networks, a good route caching strategy can reduce routing overheads by making use of the available route information more efficiently. In this paper, we first study the effects of two cache schemes, link cache and path cache, on the performance of on-demand routing protocols through simulations based on the Dynamic Source Routing (DSR) protocol. Since the path cache DSR has been extensively studied, we focus in this paper on the link cache DSR in combination with timer-based stale link expiry mechanisms. The effects of different link lifetime values on the performance of routing protocol in terms of routing overhead, packet delivery ratio and packet latency are investigated. A caching strategy incorporating adaptive link timeout is then proposed, which aims at tracking the optimal link lifetime under various node mobility levels by adaptively adjusting the link lifetime based on the real link lifetime statistics. The performance of the proposed strategy is then compared with the conventional path cache DSR. The results show that without a timeout mechanism, a link cache scheme may suffer severe performance degradation due to the use of broken routes, while the proposed adaptive link cache strategy achieves significantly improved performance by reducing the routing overhead when the network traffic load is high.     

Testing for Function and Performance: Towards an Integrated Processor Validation Methodology

Microprocessor design teams use a combination of simulation-based and formal verification techniques to validate the pre-silicon models prior to tape-out and chip fabrication. Pseudo-random test case generation to cover the architectural space is still relied upon as the principal means to identify design bugs. However, such methods are limited to functional bugs only. Detection and diagnosis of timing (performance) bugs at the architectural level is largely an expert job. Architects guide the performance team to run manually generated test cases to validate the design from a performance viewpoint. In this paper, we will review some of the new approaches being tried out to automate the generation of performance test cases. We will show how this can be done within the basic framework of current functional validation and testing of pre-silicon processor models. Three categories of reference specifications are used in determining the defect-free pipeline timing behavior associated with generated test cases: (a) axiomatic specifications of intrinsic machine latencies and bandwidths; (b) proven analytical models for simple basic block and loop test cases; and, (c) a stable reference behavioral/functional (pre-RTL) model of the processor under development. We report experimental results obtained in performance validation studies applied to real PowerPC processor development projects.     

Tree multicast strategies in mobile,multihop wireless networks

Tree multicast is a well established concept in wired networks. Two versions, persource tree multicast (e.g., DVMRP) and shared tree multicast (e.g., Core Based Tree), account for the majority of the wireline implementations. In this paper, we extend the tree multicast concept to wireless, mobile, multihop networks for applications ranging from ad hoc networking to disaster recovery and battlefield. The main challenge in wireless, mobile networks is the rapidly changing environment. We address this issue in our design by: (a) using soft state (b) assigning different roles to nodes depending on their mobility (2level mobility model); (c) proposing an adaptive scheme which combines shared tree and persource tree benefits, and (d) dynamically relocating the shared tree Rendezvous Point (RP). A detailed wireless simulation model is used to evaluate various multicast schemes. The results show that persource trees perform better in heavy loads because of the more efficient traffic distribution; while shared trees are more robust to mobility and are more scalable to large network sizes. The adaptive tree multicast scheme, a hybrid between shared tree and persource tree, combines the advantages of both and performs consistently well across all load and mobility scenarios. The main contributions of this study are: the use of a 2level mobility model to improve the stability of the shared tree, the development of a hybrid, adaptive persource and shared tree scheme, and the dynamic relocation of the RP in the shared tree.     

Perspectives on Analytical Modeling of Small Geometry MOSFETs in SPICE for Low Voltage/Low Power CMOS Circuit Design

The present state of the art in analytical MOSFET modeling for SPICE circuit simulation is reviewed, with emphasis on the circuit design usage of these models. It is noted that the model formulation represents an upper limit of what is possible from any type of model, but that good parameter extraction is required to most closely approach that limit. The individual model types presently in common use are examined, with discussion of the behavior of each model, its strengths and weaknesses, its applicability to certain types of circuits, and criteria that a circuit design consumer can employ to judge a model before using it for circuit design. Some related issues, such as node charge and gate capacitance modeling, charge conservation, and statistical simulation of process variations, are also evaluated. Finally, new trends, directions, and requirements of MOSFET modeling for circuit simulation are considered.     

Optical-LSP Establishment and a QoS Maintenance Scheme Based on Differentiated Optical QoS Classes in OVPNs

A virtual private network (VPN) over Internet has the benefit of being cost-effective and flexible. However, it has difficulties providing sufficient QoS and adequate transmission capacity for high bandwidth services. Given the increasing demand for high bandwidth Internet and the demand for QoS assurances in a VPN over Internet, IP/generalized multi-protocol label switching (GMPLS) based on a control plane combined with a high-bandwidth, dense-wavelength division multiplexing (DWDM) optical network is seen as a very favorable approach for realizing the future optical VPN (OVPN) over IP/GMPLS over DWDM. Within this architecture, providing QoS guaranteed multimedia services with a differentiated QoS guaranteed protocol framework with QoS recovery is one of the key issues to implement. Therefore, we suggest in this paper optical-label switched path (O-LSP) establishment and its QoS maintenance scheme based on differentiated optical QoS-service (DOQoS) classes. They are the key components for this DOQoS framework in assuring end-to-end QoS in an OVPN over IP/GMPLS over DWDM architecture.     

Noise considerations for mixed‐signal RF IC transceivers

This paper discusses design tradeoffs for mixedsignal radio frequency integrated circuit (RF IC) transceivers for wireless applications in terms of noise, signal power, receiver linearity, and gain. During air wave transmission, the signal is corrupted by channel noise, adjacent interfering users, image signals, and multipath fading. Furthermore, the receiver corrupts the incoming signal due to RF circuit nonlinearity (intermodulation), electronic device noise, and digital switching noise. This tutorial paper gives an overview of the design tradeoffs needed to minimize RF noise in an integrated wireless transceiver. Fundamental device noise and the coupling of switching noise from digital circuits to sensitive analog sections and their impact on RF circuits such as frequency synthesizers are examined. Methods to minimize mixedsignal noise coupling and to model substrate noise effects are presented.     

Floor acquisition multiple access (FAMA) in single‐channel wireless networks

The FAMANCS protocol is introduced for wireless LANs and adhoc networks that are based on a single channel and asynchronous transmissions (i.e., no time slotting). FAMANCS (for floor acquisition multiple access with nonpersistent carrier sensing) guarantees that a single sender is able to send data packets free of collisions to a given receiver at any given time. FAMANCS is based on a threeway handshake between sender and receiver in which the sender uses nonpersistent carrier sensing to transmit a requesttosend (RTS) and the receiver sends a cleartosend (CTS) that lasts much longer than the RTS to serve as a busy tone that forces all hidden nodes to back off long enough to allow a collisionfree data packet to arrive at the receiver. It is shown that carrier sensing is needed to support collisionfree transmissions in the presence of hidden terminals when nodes transmit RTSs asynchronously. The throughput of FAMANCS is analyzed for singlechannel networks with and without hidden terminals; the analysis shows that FAMANCS performs better than ALOHA, CSMA, and all prior proposals based on collision avoidance dialogues (e.g., MACA, MACAW, and IEEE 802.11 DFWMAC) in the presence of hidden terminals. Simulation experiments are used to confirm the analytical results.     

Consistency management in Deno

We describe a new replicatedobject protocol designed for use in mobile and weaklyconnected environments. The protocol differs from previous protocols in combining epidemic information propagation with voting, and in using fixed perobject currencies for voting. The advantage of epidemic protocols is that data movement only requires pairwise communication. Hence, there is no need for a majority quorum to be available and simultaneously connected at any single time. The protocols increase availability by using voting, rather than primarycopy or primarycommit schemes. Finally, the use of perobject currencies allows voting to take place in an entirely decentralized fashion, without any server having complete knowledge of group membership. We show that currency allocation can be used to implement diverse policies. For example, uniform currency distributions emulate traditional voting schemes, while allocating all currency to a single server emulates a primarycopy scheme. We present simulation results showing both schemes, as well as the performance advantages of using currency proxies to temporarily reallocate currency during planned disconnections. Furthermore, we discuss an initial design of the underlying replicatedobject system and present a basic API.     

Building video‐on‐demand servers

We have designed and implemented a controllable software architecture for a VideoonDemand (VOD) server. With the proposed software architecture, many system design issues can be investigated. For example, we studied several disk striping schemes in the storage subsystem and examined the impact of the disk striping schemes on the utilization of system resources. In the processing component, we observed that additional concurrent video streams can be supported by using efficient memory interleaving. Buffering with a large memory space in the processing subsystem is a common technique to alleviate the latency variance of accessing different system components. By employing userlevel control and scheduling, the variance can be decreased thereby reducing the resulting buffer space needed for each video stream. In the network subsystem, we adopted a serverdriven approach for investigating MPEG2 video delivery over Asynchronous Transfer Mode (ATM) networks. The VOD server controls the pace of video transmission and reduces the complexity of the client. Since the client has limited buffer space (due to cost considerations), we have reduced the buffer requirement by regulating the transmission based on timing information embedded in the MPEG2 streams. Our research and experimental results are based on a VOD server which is currently under construction. The prototype server is based on an SGI sharedmemory multiprocessor with a mass storage system consisting of RAID3 disk arrays. Using 30 RAID3 disk arrays, preliminary experimental results show that the prototype server can potentially support more than 360 highquality video streams with careful design and coordination of the different system components.     

Simulation‐based performance evaluation of routing protocols for mobile ad hoc networks

In this paper we evaluate several routing protocols for mobile, wireless, ad hoc networks via packetlevel simulations. The ad hoc networks are multihop wireless networks with dynamically changing network connectivity owing to mobility. The protocol suite includes several routing protocols specifically designed for ad hoc routing, as well as more traditional protocols, such as link state and distance vector, used for dynamic networks. Performance is evaluated with respect to fraction of packets delivered, endtoend delay, and routing load for a given traffic and mobility model. Both small (30 nodes) and medium sized (60 nodes) networks are used. It is observed that the new generation of ondemand routing protocols use much lower routing load, especially with small number of peertopeer conversations. However, the traditional link state and distance vector protocols provide, in general, better packet delivery and endtoend delay performance.     

Assigning codes in wireless networks: bounds and scaling properties

In the Code Division Multiple Access (CDMA) framework, collisions that can occur in wireless networks are eliminated by assigning orthogonal codes to stations, a problem equivalent to that of coloring graphs associated to the physical network. In this paper we present new upper and lower bounds for two versions of the problem (hidden and primary collision avoidance – HPCA – or hidden collision avoidance only – HCA). In particular, optimal assignments for special topologies and heuristics for general topologies are proposed. The schemes show better average results with respect to existing alternatives. Furthermore, the gaps between the upper bound given by the heuristic solution, the lower bound obtained from the maximumclique problem, and the optimal solution obtained by branch and bound are investigated in the different settings. A scaling law is then proposed to explain the relations between the number of codes needed in Euclidean networks with different station densities and connection distances. The substantial difference between the two versions HPCA and HCA of the problem is investigated by studying the probabilistic distribution of connections as a function of the distance, and the asymptotic size of the maximum cliques.     

Traffic model for third generation cellular mobile telecommunication systems

Traffic analysis for third generation mobile telecommunication systems should take into account a variety of services (e.g., voice, data, video) and environments (private, public outdoor, public indoor) as well as the user mobility behavior. The analytical traffic model presented in this paper incorporates all the above mentioned features. The model utilizes a set of simplifying assumptions regarding the distribution of certain random time intervals (e.g., call duration and cell residence time) and the handover arrival process. The core of the model focuses on the estimation of the cell border crossing rate and the time it takes a busy mobile user to leave a cell area. This allows for the estimation of the handover rate and the call duration within a cell, which in turn, utilizing an iterative method, allows for the calculation of the offered traffic load per cell. The major advantages of the model are: (a) the simple closed form solutions, (b) its independence from the applied radio resource management scheme, and (c) its accuracy. The latter is validated via a simulation tool, which accommodates different cell-layout scenarios over a geographical area, representing a typical city center, modeled as a Manhattan grid.