Emission reductions potential for energy from municipal solid waste incineration in Chongqing

Municipal solid waste (MSW) is a potential energy resource which can be incineration to energy. Furthermore, it can conserve more valuable fossil fuel and improve the environment by lessening Greenhouse Gas (GHG) emission and the amount of waste that must be landfilled. This paper highlights the MSW generation and characteristics for the city of Chongqing, the nation's fourth largest municipality after Beijing, Shanghai and Tianjin. At present the daily amount of MSW generated per person is about 0.85 kg; food waste accounts for about 53.7% of total MSW. MSW in Chongqing has higher moisture content and lower net caloric value, which is an obstruction for incineration. This paper examines the emission reductions potential for MSW incineration power plant in urban Chongqing. As a case study, emission reductions analysis and economic assessment was implemented for Tongxing MSW incineration power plant. The results show that with the power displacement potential at 235 060 MWh, Chongqing is expected to generate emission reductions as much as 815 862–827 969 tCO₂ and net profit US$7.72 million per annum.     

EUBIONET III—Solutions to biomass trade and market barriers

The EUBIONET III project has boosted (i) sustainable, transparent international biomass fuel trade, (ii) investments in best practice technologies and (iii) new services on biomass heat sector. Furthermore, it identified cost-efficient and value-adding use of biomass for energy and industry. The aims of this article are to provide a synthesis of the key results of this project. Estimated annual solid biomass potential in the EU-27 is almost 6600 PJ (157 Mtoe), of which 48% is currently utilised. The greatest potential for increased use lies in forest residues and herbaceous biomass. Trade barriers have been evaluated and some solutions suggested such as CN codes for wood pellets and price indexes for industrial wood pellets and wood chips. The analysis of wood pellet and wood chip prices revealed large difference amongst EU countries, but also that on the short term prices of woody and fossil fuels are barely correlated. Sustainable production and use of solid biomass are also deemed important by most European stakeholders, and many support the introduction of harmonised sustainability criteria, albeit under a number of preconditions. The study identified also that a number of woody and agro-industrial residue streams remain un- or underutilised. The estimated European total potential of agro-industrial sources is more than 250 PJ (7.2 Mtoe), the amount of unutilised woody biomass (the annual increment of growing stock) even amounts to 3150 PJ (75 Mtoe). Finally 35 case studies of biomass heating substituting fossil fuels were carried out, showing that the potential to reduce GHG emissions ranges between 90 and 98%, while costs are very similar to fossil fuel heating systems. Overall, we conclude that solid biomass is growing strongly, and is likely to heavily contribute to the EU renewable energy targets in the coming decade.     

Assessing the economic value of renewable distributed generation in the Northeastern American market

Incentive programs and tax rebates are commonly offered to offset the high initial costs of small-scale renewable energy systems (RES) and foster their implementation. However, the economic costs of RES grid integration must be fully known in order to determine whether such subsidies are justified. The objective of this paper is to assess the economic value of RES, including their environmental benefits, using hourly generation information in conjunction with hourly wholesale price data. Reaching the paper′s objective will provide a better estimate of the bias that could result from neglecting 1) the time pattern of the hourly wholesale price, 2) the impacts of carbon taxes on the hourly wholesale price and 3) the value of the marginal hourly GHG emissions. Selected RES include two types of grid-connected photovoltaic panels (3 kWp mono- and poly-crystalline) and three types of micro-wind turbines (1, 10 and 30 kW) modeled for different climatic conditions in the province of Quebec (Canada). The cost of electricity is based on the technical performance of these RES using a life cycle costing methodology. The economic value of RES electricity is estimated using the hourly wholesale electricity price in Northeastern American markets in 2006–2008. Results show that distributed generation (DG) has no economic benefits using the selected RES, even with a US$100/tonne of CO₂-equivalent carbon tax. This finding remains the same when the value of the avoided GHG emissions is fully internalized, except for one scenario (micro-wind 30 kW). Our results are key to understanding the extent to which subsidies for distributed RES can be economically sustainable when the latter are integrated into regional networks driven by centralized electricity production.     

The economic costs of reducing greenhouse gas emissions under a U.S. national renewable electricity mandate

The electricity sector is the largest source of greenhouse gas emissions (GHGs) in the U.S. Many states have passed and Congress has considered Renewable Portfolio Standards (RPS), mandates that specific percentages of electricity be generated from renewable resources. We perform a technical and economic assessment and estimate the economic costs and net GHG reductions from a national 25 percent RPS by 2025 relative to coal-based electricity. This policy would reduce GHG emissions by about 670 million metric tons per year, 11 percent of 2008 U.S. emissions. The first 100 million metric tons could be abated for less than $36/metric ton. However, marginal costs climb to $50 for 300 million metric tons and to as much as $70/metric ton to fulfill the RPS. The total economic costs of such a policy are about $35 billion annually. We also examine the cost sensitivity to favorable and unfavorable technology development assumptions. We find that a 25 percent RPS would likely be an economically efficient method for utilities to substantially reduce GHG emissions only under the favorable scenario. These estimates can be compared with other approaches, including increased R&D funding for renewables or deployment of efficiency and/or other low-carbon generation technologies.     

Modeling California policy impacts on greenhouse gas emissions

This paper examines policy and technology scenarios in California, emphasizing greenhouse gas (GHG) emissions in 2020 and 2030. Using CALGAPS, a new, validated model simulating GHG and criteria pollutant emissions in California from 2010 to 2050, four scenarios were developed: Committed Policies (S1), Uncommitted Policies (S2), Potential Policy and Technology Futures (S3), and Counterfactual (S0), which omits all GHG policies. Forty-nine individual policies were represented. For S1–S3, GHG emissions fall below the AB 32 policy 2020 target [427 million metric tons CO₂ equivalent (MtCO₂e) yr⁻¹], indicating that committed policies may be sufficient to meet mandated reductions. In 2030, emissions span 211–428 MtCO₂e yr⁻¹, suggesting that policy choices made today can strongly affect outcomes over the next two decades. Long-term (2050) emissions were all well above the target set by Executive Order S-3-05 (85 MtCO₂e yr⁻¹); additional policies or technology development (beyond the study scope) are likely needed to achieve this objective. Cumulative emissions suggest a different outcome, however: due to early emissions reductions, S3 achieves lower cumulative emissions in 2050 than a pathway that linearly reduces emissions between 2020 and 2050 policy targets. Sensitivity analysis provided quantification of individual policy GHG emissions reduction benefits.     

Environmental,technical and financial feasibility study of solar power plants by RETScreen,according to the targeting of energy subsidies in Iran

In this study, based on new electricity tariffs, three scenarios have been developed with The RETScreen International Photovoltaic Project Model, according to the targeting of energy subsidies in Iran. We have also dedicated one of our scenarios to the reduction of greenhouse gasses.In the first case the electricity price was set to 3.75 Cents/kWh (450 Rial/kWh) and no credit was assigned to the reduction of greenhouse gasses (GHG), therefore equity payback (Return positive cash flow) has been 12.1 year. In the second case the electricity price was set to 17.5 Cents/kWh, therefore equity payback (return positive cash flow) was 8 year. Finally in the last scenario by considering a credit to the reduction of greenhouse gasses and electricity price being 175 Cents/kWh and applying solar panels with high efficiency and suitable batteries (DOD = 60%), equity payback (return positive cash flow) reached within 6 years.     

Climate policy scenarios in Brazil: A multi-model comparison for energy

This paper assesses the effects of market-based mechanisms and carbon emission restrictions on the Brazilian energy system by comparing the results of six different energy-economic or integrated assessment models under different scenarios for carbon taxes and abatement targets up to 2050. Results show an increase over time in emissions in the baseline scenarios due, largely, to higher penetration of natural gas and coal. Climate policy scenarios, however, indicate that such a pathway can be avoided. While taxes up to 32 US$/tCO₂e do not significantly reduce emissions, higher taxes (from 50 US$/tCO₂e in 2020 to 16 2US$/tCO₂e in 2050) induce average emission reductions around 60% when compared to the baseline. Emission constraint scenarios yield even lower reductions in most models. Emission reductions are mostly due to lower energy consumption, increased penetration of renewable energy (especially biomass and wind) and of carbon capture and storage technologies for fossil and/or biomass fuels. This paper also provides a discussion of specific issues related to mitigation alternatives in Brazil. The range of mitigation options resulting from the model runs generally falls within the limits found for specific energy sources in the country, although infrastructure investments and technology improvements are needed for the projected mitigation scenarios to achieve actual feasibility.     

A comparative analysis of woody biomass and coal for electricity generation under various CO2 emission reductions and taxes

Mitigating global climate change via CO₂ emission control and taxation is likely to enhance the economic potential of bioenergy production and utilization. This study investigated the cost competitiveness of woody biomass for electricity production in the US under alternative CO₂ emission reductions and taxes. We first simulated changes in the price of coal for electricity production due to CO₂ emission reductions and taxation using a computable general equilibrium model. Then, the costs of electricity generation fueled by energy crops (hybrid poplar), logging residues, and coal were estimated using the capital budgeting method. Our results indicate that logging residues would be competitive with coal if emissions were taxed at about US$25 Mg⁻¹ CO₂, while an emission tax US$100 Mg⁻¹ CO₂ or higher would be needed for hybrid poplar plantations at a yield of 11.21 dry Mg ha⁻¹ yr⁻¹ (5 dry tons ac⁻¹ yr⁻¹) to compete with coal in electricity production. Reaching the CO₂ emission targets committed under the Kyoto Protocol would only slightly increase the price of fossil fuels, generating little impact on the competitiveness of woody biomass. However, the price of coal used for electricity production would significantly increase if global CO₂ emissions were curtailed by 20% or more. Logging residues would become a competitive fuel source for electricity production if current global CO₂ emissions were cut by 20–30%. Hybrid poplar plantations would not be able to compete with coal until emissions were reduced by 40% or more.     

Modern bioenergy from agricultural and forestry residues in Cameroon: Potential,challenges and the way forward

Environmentally benign modern bioenergy is widely acknowledged as a potential substitute for fossil fuels to offset the human dependence on fossil fuels for energy. We have profiled Cameroon, a country where modern bioenergy remains largely untapped due to a lack of availability of biomass data and gaps in existing policies. This study assessed the biomass resource potential in Cameroon from sustainably extracted agricultural and forest residues. We estimated that environmentally benign residues amount to 1.11 million bone dry tons per year. This has the potential to yield 0.12–0.32 billion liters of ethanol annually to displace 18–48% of the national consumption of gasoline. Alternatively, the residues could provide 0.08–0.22 billion liters of biomass to Fischer Tropsch diesel annually to offset 17–45% of diesel fuel use. For the generation of bioelectricity, the residues could supply 0.76–2.02 TW h, which is the equivalent of 15–38% of Cameroon's current electricity consumption. This could help spread electricity throughout the country, especially in farming communities where the residues are plentiful. The residues could, however, offset only 3% of the national consumption of traditional biomass (woodfuel and charcoal). Policy recommendations that promote the wider uptake of modern bioenergy applications from residues are provided.     

Biomass assessment and small scale biomass fired electricity generation in the Green Triangle, Australia

Coal fired electricity is a major factor in Australia’s greenhouse gas emissions (GHG) emissions. The country has adopted a mandatory renewable energy target (MRET) to ensure that 20% of electricity comes from renewable sources by 2020. In order to support the MRET, a market scheme of tradable Renewable Energy Certificates (RECs) has been implemented since 2001. Generators using biomass from eligible sources are able to contribute to GHG emission reduction through the substitution of coal for electricity production and are eligible to create and trade RECs. This paper quantifies the potential biomass resources available for energy generation from forestry and agriculture in the Green Triangle, one of the most promising Australian Regions for biomass production. We analyse the cost of electricity generation using direct firing of biomass, and estimate the required REC prices to make it competitive with coal fired electricity generation. Major findings suggest that more than 2.6 million tonnes of biomass are produced every year within 200 km of the regional hub of Mount Gambier and biomass fired electricity is viable using feedstock with a plant gate cost of 46 Australian Dollars (AUD) per tonne under the current REC price of 34 AUD per MWh. These findings are then discussed in the context of regional energy security and existing targets and incentives for renewable energies.     

Viability of solar photovoltaics as an electricity generation source for Jordan

Viability of solar photovoltaics as an electricity generation source for Jordan was assessed utilizing a proposed 5 MW grid-connected solar photovoltaic power plant. Long-term (1994–2003) monthly average daily global solar radiation and sunshine duration data for 24 locations – distributed all over the country – were studied and analyzed to assess the distribution of radiation and sunshine duration over Jordan, and formed an input data for evaluation and analysis of the proposed plant's electricity production and economic feasibility. It was found that – depending on the geographical location – the global solar radiation on horizontal surface varied between 1.51 and 2.46 MWh/m²/year with an overall mean value of 2.01 MWh/m²/year for Jordan. The sunshine duration was found to vary – according to the location – between 8.47 and 9.68 h/day, with a mean value of 9.07 h/day and about 3311 sunshine hours annually for Jordan. The annual electricity production of the proposed plant varied depending on the location between 6.886 and 11.919 GWh/year, with a mean value of 9.46 GWh/year. The specific yield varied between 340.9 and 196.9 kWh/m², while the mean value was 270.59 kWh/m². Analysis of the annual electricity production of the plant, the specific yield, besides the economic indicators i.e., internal rate of return, simple payback period, years– to- positive cash flow, net present value, annual life cycle saving, benefit–cost ratio, and cost of energy – for all sites – showed that Tafila and Karak are the most suitable sites for the solar photovoltaic power plant's development and Wadi Yabis is the worst. The results also showed that an average of 7414.9 tons of greenhouse gases can be avoided annually utilizing the proposed plant for electricity generation at any part of Jordan.     

Future demand for electricity in Nigeria

Availability and reliability of electricity supplies have always been vexed issue in Nigeria. With an estimated population of 130 million people in AD 2005, Nigeria is the most populous country in Africa and belongs to the group of countries with the lowest electricity consumption per capita in the continent. Nigeria is also ranked among the poorest countries in the world. This paper examines the likely trend in the demand for electricity over the next 25 years under the assumptions that (i) there is a rapid economic development such that Nigeria transforms from low- to middle-income economy during this period, (ii) Nigeria meets the millennium development goals (MDG) in AD 2015, and (iii) the country achieves the status of an industrializing nation. For these to happen, this paper projects that electric-power generation will have to rise from the current capacity of 6500 MW to over 160 GW in AD 2030. This level of supply will be significant enough to increase the per capita electricity consumption to about 5000 kWh per capita by the year 2030. Even then, this just compares with the AD 2003 per capital consumption of some industrializing countries. Analysis of the level of investment required to meet the projected power demand indicates that annual investment cost will rise from US$3.8 billion in AD 2006 to a peak of US$21 billion in AD 2028. The total investment stream over the 25 year period comes to US$262 billion or roughly US$10 billion per annum.     

CO2 emission and avoidance in mobile applications

The present paper analyzes the CO₂ emissions from mobile communications and portable wireless electronic devices in the Korea environment. The quantitative and qualitative contributions to CO₂ emission reduction of the substitution of renewable energy for traditional electricity as the power supply in these devices are also investigated.Firstly, the national CO₂ emission coefficient is temporarily estimated as 0.504 tCO₂/MWh, which can be regarded as the basis for calculating CO₂ emissions in mobile devices. The total annual CO₂ emissions from mobile devices is calculated as approximately 1.4 million tons, comprising 0.3 million tCO₂ for portable wireless electronic devices and 1.1 million tCO₂ for electric equipment required for mobile communication service.If renewable energy sources are substituted for traditional electricity sources in the supply for mobile devices, solar cell and wind turbine systems can reduce CO₂ emissions by about 87% and 97%, respectively. However, the use of fuel cell systems will only slightly reduce the CO₂ emissions. However, the use of the direct methanol fuel cell system can release 8% more CO₂ emissions than that emitted by using traditional electricity sources.     

Geothermal energy potential for power generation in Turkey: A case study in Simav,Kutahya

Geothermal energy and the other renewable energy sources are becoming attractive solutions for clean and sustainable energy needs of Turkey. Geothermal energy is being used for electricity production and it has direct usage in Turkey, which is among the first five countries in the world for the geothermal direct usage applications. Although, Turkey is the second country to have the highest geothermal energy potential in Europe, the electricity production from geothermal energy is quite low. The main purpose of this study is to investigate the status of the geothermal energy for the electricity generation in Turkey. Currently, there is one geothermal power plant with an installed capacity of 20.4 MWe already operating in the Denizli–Kizildere geothermal field and another is under the construction in the Aydin–Germencik field.This study examines the potential and utilization of the existing geothermal energy resources in Kutahya–Simav region. The temperature of the geothermal fluid in the Simav–Eynal field is too high for the district heating system. Therefore, the possibility of electrical energy generation by a binary-cycle has been researched and the preliminary feasibility studies have been conducted in the field. For the environmental reasons, the working fluid used in this binary power plant has been chosen as HCFC-124. It has been concluded that the Kutahya–Simav geothermal power plant has the potential to produce an installed capacity of 2.9 MWe energy, and a minimum of 17,020 MWh/year electrical energy can be produced from this plant. As a conclusion, the pre-feasibility study indicates that the project is economically feasible and applicable.     

Measures of the environmental footprint of the front end of the nuclear fuel cycle

Previous estimates of environmental impacts associated with the front end of the nuclear fuel cycle (FEFC) have focused primarily on energy consumption and CO₂ emissions. Results have varied widely. This work builds upon reports from operating facilities and other primary data sources to build a database of front end environmental impacts. This work also addresses land transformation and water withdrawals associated with the processes of the FEFC. These processes include uranium extraction, conversion, enrichment, fuel fabrication, depleted uranium disposition, and transportation.To allow summing the impacts across processes, all impacts were normalized per tonne of natural uranium mined as well as per MWh(e) of electricity produced, a more conventional unit for measuring environmental impacts that facilitates comparison with other studies. This conversion was based on mass balances and process efficiencies associated with the current once-through LWR fuel cycle.Total energy input is calculated at 8.7 × 10^− 3 GJ(e)/MWh(e) of electricity and 5.9 × 10^− 3 GJ(t)/MWh(e) of thermal energy. It is dominated by the energy required for uranium extraction, conversion to fluoride compound for subsequent enrichment, and enrichment. An estimate of the carbon footprint is made from the direct energy consumption at 1.7 kg CO₂/MWh(e). Water use is likewise dominated by requirements of uranium extraction, totaling 154 L/MWh(e). Land use is calculated at 8 × 10^− 3 m²/MWh(e), over 90% of which is due to uranium extraction. Quantified impacts are limited to those resulting from activities performed within the FEFC process facilities (i.e. within the plant gates). Energy embodied in material inputs such as process chemicals and fuel cladding is identified but not explicitly quantified in this study. Inclusion of indirect energy associated with embodied energy as well as construction and decommissioning of facilities could increase the FEFC energy intensity estimate by a factor of up to 2.     

Biomass and central receiver system (CRS) hybridization: Volumetric air CRS and integration of a biomass waste direct burning boiler on steam cycle

Concentrated solar power (CSP) plants generate an almost continuous flow of fully dispatchable “renewable” electricity and can replace the present fossil fuel power plants for base load electricity generation. Nevertheless, actual CSP plants have moderate electricity costs, in most cases quite low capacity factors and transient problems due to high inertia. Hybridization can help solve these problems and, if done with the integration of forest waste biomass, the “renewable” goal can be maintained, with positive impact on forest fire reduction. Local conditions, resources and feed in tariffs have great impact on the economical and technical evaluation of hybrid solutions; one of the premium European locations for this type of power plants is the Portuguese Algarve region.Due to the concept innovation level, conservative approaches were considered to be the best solutions. In this perspective, for a lower capital investment 4 MWe power plant scale, the best technical/economical solution is the hybrid CRS/biomass power plant HVIB3S4s with CS3 control strategy. It results in a levelized electricity cost (LEC) of 0.146 €/kWh, with higher efficiency and capacity factor than a conventional 4 MWe CRS. A larger 10 MWe hybrid power plant HVIB3S10s could generate electricity with positive economical indicators (LEC of 0.108 €/kWh and IRR of 11.0%), with twice the annual efficiency (feedstock to electricity) and lower costs than a conventional 4 MWe CRS. It would also lead to a 17% reduction in biomass consumption (approximately 12,000 tons less per year) when compared with a typical 10 MWe biomass power plant – FRB10; this would be significant in the case of continuous biomass price increase.     

An ex-post analysis of the effect of renewables and cogeneration on Spanish electricity prices

Growing concerns about climate change and energy dependence are driving specific policies to support renewable or more efficient energy sources such as cogeneration in many regions, particularly in the production of electricity. These policies have a non-negligible cost, and therefore a careful assessment of their impacts seems necessary. In particular, one of the most-debated impacts is their effect on electricity prices, for which there have been some ex-ante studies, but few ex-post studies. This article presents a full ex-post empirical analysis, by looking at use of technologies and hourly electricity prices for 2005–2009 in Spain, to study the effects that the introduction of renewable electricity and cogeneration has had on wholesale electricity prices. It is particularly interesting to perform this study in Spain where an active system of public support to renewables and cogeneration has led to a considerable expansion of these energy sources and electricity pricing is at the center of intense debate. The paper reports that a marginal increase of 1 GWh of electricity production using renewables and cogeneration is associated with a reduction of almost 2 € per MWh in electricity prices (around 4% of the average price for the analyzed period).     

Optimum utilization of renewable energy sources in a remote area

Energy is supplied in the form of electricity, heat or fuels and an energy supply system must guarantee sustainable energy supplies, production and distribution of energy. Such system based on renewable energy can be utilized as integrated renewable energy system (IRES), which can satisfy the energy needs of an area in appropriate and sustainable manner. For renewable energy based rural electrification of remote areas, the IRES can be modeled and optimized for meeting the energy needs. For the purpose, the Jaunpur block of Uttaranchal state of India has been selected as remote area. On the basis of field data, the resource potential and energy demand has been estimated. The total load is 808 MWh/yr and total available resources are 807 MWh/yr, whereas %age contribution of each resources are MHP 15.88% (128166), solar 2.77% (22363), wind 1.89% (15251) and biomass energy 79.46% (641384) kWh/yr. The model has been optimized using LINDO software 6.10 version. The results indicated that the optimized model has been found to the best choice for meeting the energy needs of the area. Renewable energy sources can contribute to the total energy demands as 16.81% (115465), solar 2.27% (15588), wind 1.78% (12201) and biomass energy 79.14% (543546) kWh/yr for the fulfillment of 687 MWh/yr at the 15% reduced level of 808 MWh/yr load. The results further indicated that optimized IRES can provide a feasible solution in terms of energy fulfillments in the range of EPDF from 1.0 to 0.75 because below 0.75 EPDF (0.50–0.25) the deficit start and so that model becomes non-feasible solution. The EPDF is electric power delivery factor and also called optimizing power factor and is maximum equal to 1. The paper reports the results of optimization of IRES models of the study area of Zone 4 of Jaunpur block of Uttaranchal state.     

An agro-economic analysis of willow cultivation in Poland

Bioenergy is recognized as the most important renewable energy source in Poland in several national policy documents. This has spurred an in increasing interest in energy crops, particularly willow, due to the large areas of arable land in Poland. However, in order for willow to be adopted by farmers, this crop must be perceived to be at least as profitable as cereal crops, such as wheat and barley, which compete for the same land. The objective of this study was to calculate the economics of growing willow on relatively large farms from a farmer's perspective in Poland. An additional objective was to relate the viability of growing willow to that of growing wheat and barley. Our calculations show that growing willow can indeed be an economically viable alternative to wheat and barley. At the current Polish price of wood chips (about 33 PLN/MWh or 7.5 €/MWh), the viability of willow is similar to that of barley given our assumptions on yields, etc. Wheat is the most viable crop of the three crops studied. Willow, however, is more profitable than both wheat and barley assuming a wood chip price of 50 PLN/MWh (11 €/MWh), which better represents the price in Europe as a whole. Despite good viability, willow is unlikely to be adopted by a great number of farmers without active support mechanisms and long-term stability of the status of energy crops in the Polish and the EU common agricultural policy.     

Techno-economic evaluation of off-grid hybrid photovoltaic–diesel–battery power systems for rural electrification in Saudi Arabia—A way forward for sustainable development

The burning of depleting fossil fuels for power generation has detrimental impact on human life and climate. In view of this, renewable solar energy sources are being increasingly exploited to meet the energy needs. Moreover, solar photovoltaic (PV)–diesel hybrid system technology promises lot of opportunities in remote areas which are far from utility grid and are driven by diesel generators. Integration of PV systems with the diesel plants is being disseminated worldwide to reduce diesel fuel consumption and to minimize atmospheric pollution. The Kingdom of Saudi Arabia (K.S.A.) being endowed with high intensity of solar radiation, is a prospective candidate for deployment of PV systems. Also, K.S.A. has large number of remote scattered villages. The aim of this study is to analyze solar radiation data of Rafha, K.S.A., to assess the techno-economic feasibility of hybrid PV–diesel–battery power systems to meet the load requirements of a typical remote village Rawdhat Bin Habbas (RBH) with annual electrical energy demand of 15,943 MWh. Rafha is located near RBH. The monthly average daily global solar radiation ranges from 3.04 to 7.3 kWh/m². NREL's HOMER software has been used to perform the techno-economic evaluation. The simulation results indicate that for a hybrid system composed of 2.5 MWp capacity PV system together with 4.5 MW diesel system (three 1.5 MW units) and a battery storage of 1 h of autonomy (equivalent to 1 h of average load), the PV penetration is 27%. The cost of generating energy (COE, US$/kWh) from the above hybrid system has been found to be 0.170$/kWh (assuming diesel fuel price of 0.1$/l). The study exhibits that the operational hours of diesel generators decrease with increase in PV capacity. The investigation also examines the effect of PV/battery penetration on COE, operational hours of diesel gensets. Concurrently, emphasis has been placed on: un-met load, excess electricity generation, percentage fuel savings and reduction in carbon emissions (for different scenarios such as: PV–diesel without storage, PV–diesel with storage, as compared to diesel-only situation), COE of different hybrid systems, etc. The decrease in carbon emissions by using the above hybrid system is about 24% as compared to the diesel-only scenario.