Mesoporous Ag/ZnO hybrid cages derived from ZIF-8 for enhanced photocatalytic and antibacterial activities

Ag/ZnO hybrid cages with well-preserved polyhedron shape and rich mesoporous structures were prepared thorough in situ pyrolysis of AgNO₃ impregnated ZIF-8 precursor. Due to the bi-template function of ZIF-8, the as-prepared cages show well-defined hollow chamber inherited from the precursor and uniformly embedded Ag nanoparticles (NPs). The as-introduced Ag NPs could enhance the light absorption and promote charge separation, which finally improve the antibacterial performances. Therefore, compared with pure ZnO, the Ag/ZnO hybrid cages demonstrate prominent photocatalytic degradation of different organic dyes, such as Methylene Blue, Methylene Orange, Eosin and Rhodamine B under simulated sunlight. In addition, the hybrid Ag/ZnO cages exhibit outstanding inhibition performances against Escherichia coli, Staphylococcus aureus, and the highly infective Mycobacterium-tuberculosis. The photocatalytic and antibacterial mechanism of the hybrid Ag/ZnO cages were also studied in detail by means of optical/electrochemical dynamic tests and Ag⁺ and Zn²⁺ release measurements.     

Antibacterial,Antibiofilm, and Antiviral Farnesol-Containing Nanoparticles Prevent Staphylococcus aureus from Drug Resistance Development

Multidrug antimicrobial resistance is a constantly growing health care issue associated with increased mortality and morbidity, and huge financial burden. Bacteria frequently form biofilm communities responsible for numerous persistent infections resistant to conventional antibiotics. Herein, novel nanoparticles (NPs) loaded with the natural bactericide farnesol (FSL NPs) are generated using high-intensity ultrasound. The nanoformulation of farnesol improved its antibacterial properties and demonstrated complete eradication of Staphylococcus aureus within less than 3 h, without inducing resistance development, and was able to 100% inhibit the establishment of a drug-resistant S. aureus biofilm. These antibiotic-free nano-antimicrobials also reduced the mature biofilm at a very low concentration of the active agent. In addition to the outstanding antibacterial properties, the engineered nano-entities demonstrated strong antiviral properties and inhibited the spike proteins of SARS-CoV-2 by up to 83%. The novel FSL NPs did not cause skin tissue irritation and did not induce the secretion of anti-inflammatory cytokines in a 3D skin tissue model. These results support the potential of these bio-based nano-actives to replace the existing antibiotics and they may be used for the development of topical pharmaceutic products for controlling microbial skin infections, without inducing resistance development.     

Construction of Er-doped ZnO/SiO2 composites with enhanced antimicrobial properties and analysis of antibacterial mechanism

Herein, silica carrier was used as underlying structure to prepare composite material loaded with rare earth element Er and Zn. Rare earth elements can improve antimicrobial effects of ZnO due to their specific electronic structure. Er–ZnO/SiO₂ hybrid antibacterial material was prepared through sol-gel method and its structure and morphology were characterized by scanning electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, inductively coupled plasma emission spectroscopy and Brunauer-Emmett-Teller measurements. E. coli and S. aureus were selected as model bacteria to assess antibacterial activity of prepared hybrid material by plate coating method. Er–ZnO/SiO₂ exhibited good antibacterial activity towards E. coli and S. aureus. Increase in Er³⁺ concentration from 0.12% to 1.10% led to increase in antibacterial performance followed by subsequent decrease. Improving effect of Er relied on the molar ratio of Er doped in ZnO/SiO₂ hybrid material. The optimal sample was found to be 0.60%Er–ZnO/SiO₂, with antibacterial rates of 93.71% and 70.46% against E. coli and S. aureus, respectively. Antibacterial mechanism was assessed by fluorescence detection of reactive oxygen species. In addition, flame atomic absorption spectrometry was used to measure the amount of released Zn²⁺. Results also showed that 0.60%Er–ZnO/SiO₂ hybrid material generated more reactive oxygen species, released more Zn²⁺ ions, and had the largest surface area, which improved its antibacterial rate. Thus, Er enhanced antibacterial properties of ZnO/SiO₂, providing these composite materials with great potential as antibacterial products.     

Green synthesis,characterization and antimicrobial activity of carbon quantum dots-decorated ZnO nanoparticles

In this research, ZnO nanoparticles (ZnO NPs) and Carbon Quantum Dots-decorated ZnO nanoparticles (ZnO/CQDs NCs) were prepared via different procedures and precursors. Soya chunk was applied as a source of carbon for the preparation of CQDs. Crystalline structure, purity, size, and morphological properties of products were investigated via X-ray diffraction (XRD) analysis, energy dispersive spectroscopy (EDS), Transmission Electron Microscopy (TEM), FT-IR, and Scanning Electron Microscopy (SEM) respectively. Findings showed that homogeneity, size, and morphological properties of products can be intensively affected via different precursors and procedures. From the homogeneity, size, and morphological point of view, the hydrothermal route, ammonia, 5 h, and 180 °C were the optimum procedure, pH adjuster, temperature, and time respectively. Optimum product was applied for carrying out minimum inhibitory concentration (MIC) and Agar disk-diffusion tests against various microorganisms. Results demonstrated that prepared ZnO NPs have maximum antibacterial activity against Staphylococcus aureus (19.53 μg/ml) and ZnO/CQDs NCs have no inhibitory effect against tested microorganisms. For ZnO NPs, the disk diffusion test proved that the highest growth inhibition zone was related to Staphylococcus aureus (15 mm). The presence of CQDs in ZnO/CQDs NCs reduces the inhibitory effect of ZnO NPs intensively.     

Development of g-C3N4/ZnO nanocomposite as a novel,highly effective and durable photocatalytic antibacterial coating for cotton fabric

Photocatalytic antibacterial coats are considered among the best solutions to bacterial contamination of fabrics, with the drawback of reduced efficacy after continued use and washing. In the present study, the g-C₃N₄/ZnO (CNZ) nanocomposite has been introduced as a novel cotton fabric coating, with high durability, and CNZ nanopowders were synthesized using a two-step thermal synthesis process and directly coated onto cotton fabric using the sonication technique. The synthesized nanoparticles (NPs) were examined using X-ray diffraction (XRD), UV–visible spectroscopy, photoluminescence (PL), Brunauer-Emmett-Teller (BET), and Fourier transform infrared (FTIR) analyzes. Besides, the SEM analysis confirmed the successful deposition of NPs on cotton fabric. The photodegradation of methylene blue (MB) stain was assessed as a functional test for the photocatalytic effectiveness of the coated fabric, then its antibacterial properties were evaluated under visible light, by direct contact with bacterial suspensions and culturing. The results revealed that the CNZ-coated cotton fabric containing 30% ZnO (CNZ-30) has significant photocatalytic antibacterial activity against both Escherichia coli (gram-negative), and Staphylococcus aureus (gram-positive) bacteria. The bacterial reduction rate of CNZ-30 coated fabric for both E. coli and S. aureus was above 98%, even after 18 washing cycles. This excellent performance is attributed to the effective coupling of ZnO with g-C₃N₄, improved light absorption, and reduced e⁻/h⁺ pair recombination rates. This study novel coating method can offer an environmentally friendly, cost-effective, and simple process to manufacture hybrid CNZ antibacterial cotton in the textile industry.     

Preparation of 3D crimped ZnO/PAN hybrid nanofiber mats with photocatalytic activity and antibacterial properties by blow-spinning

Zinc oxide (ZnO) nanostructures have received widespread attention due to their unique structure and broad application possibilities, but high preparation costs and agglomeration limit their usage. In this article, low-cost and environmentally friendly cellulose and ZnCl₂ are used to synthesize ZnO nanoparticles (ZnO NPs). Subsequently, multifunctional ZnO/polyacrylonitrile hybrid nanofiber mats (ZnO/PAN@NFMs) with mechanical stability suitable for large-scale application are prepared via solution blow-spinning. The synthesized ZnO/PAN@NFMs exhibit higher photodegradation of organic dyes than earlier reported semiconductors and good recycling performance with an organic dye degradation above 94%–98% after five cycles, which is ascribed to fixation of the ZnO NPs in the nanofibers. In addition, the inhibition rate for Escherichia coli and Staphylococcus aureus is above 99.9% and the bacteriostatic rate against E. coli remains as high as 99% after 10 cycles. From these properties, the synthesized composite ZnO/PAN@NFMs are promising for wastewater cleaning and antibacterial fabrics.     

Hyaluronic Acid Derivative Molecular Weight-Dependent Synthesis and Antimicrobial Effect of Hybrid Silver Nanoparticles

Silver nanoparticles (Ag NPs) appeared as promising antimicrobial candidates to face the development of antibiotic resistance. Although reported as toxic towards mammalian cells, their combination with biomolecules have shown reduced toxicity, while maintaining the antimicrobial function. Herein, hyaluronic acid (HA) with low (40 kDa), medium (200 and 600 kDa) and high (2 MDa) molecular weight (Mw) was modified with adipic acid dihydrazide (ADH) and used as reducing and capping agents to synthesise antimicrobial hybrid Ag NPs. The Mw of the polymer played a crucial role in the morphology, size and antibacterial activity of the Ag NPs. The 600 and 200 kDa HA-ADH-Ag NPs were able to reduce the Escherichia coli and Staphylococcus aureus concentration by more than 3 logs, while the 40 kDa NPs reached ~2 logs reduction. The 2 MDa HA-ADH failed to form homogenous NPs with strong bactericidal activity. A mechanistic study of the interaction with a model bacterial membrane using Langmuir isotherms confirmed the greater interaction between bacteria and higher Mw polymers and the effect of the NP’s morphology. The nanocomposites low toxicity to human skin cells was demonstrated in vitro, showing more than 90% cell viability after incubation with the NPs.     

Development of pH-sensitive and antibacterial gelatin/citric acid/Ag nanocomposite hydrogels with potential for biomedical applications

This work aimed to prepare pH-sensitive and antibacterial drug releasing systems through a completely green route. To achieve this, the gelatin natural biopolymer was crosslinked with citric acid in the presence of Ag nanoparticles (NPs). Interestingly, Ag NPs formation and gelatin crosslinking were simultaneously occurred during annealing of samples without need for any toxic chemicals, which were confirmed by FTIR, UV-vis spectra, SEM and TEM observations. In addition, potential of the citric acid crosslinked-gelatin/Ag nanocomposite hydrogels was successfully explored for drug delivery applications using cefixime as a model drug. It was found that these hydrogels have pH-dependent swelling and drug release behavior with higher drug release at pH 7.4 compared to pH 1.2. Also, an antibacterial effect against the E. coli and S. aureus microorganisms was achieved by incorporation of Ag NPs into hydrogels. These hydrogels can be considered as stimuli responsive materials for oral drug delivery and wound dressing applications.     

Silver-zinc oxide nanocomposite: From synthesis to antimicrobial and anticancer properties

A green method by Verbascum speciosum was used to synthesize zinc oxide nanoparticles (ZnO NPs). ZnO NPs were coated with silver to synthesize Ag–ZnO nanocomposite (NCs). The physicochemical properties of Ag–ZnO NCs were analyzed by Fourier-transform infrared spectroscopy (FTIR), powder X-ray diffraction (PXRD), field emission scanning electron microscope (FESEM), transmission electron microscopy (TEM), dynamic light scattering (DLS), and zeta potential. The FTIR indicated the peak of Zn–O vibration and some hydroxyl and carboxyl groups. PXRD analyses confirmed the synthesis of ZnO NPs and Ag–ZnO NCs. Due to the size of the crystallite obtained from PXRD, solid-phase sizes (from FESEM and TEM images), and dynamic sizes from DLS, agglomeration was observed. The Ag–ZnO NCs showed a negative charge surface (?49.3 mV). Ag–ZnO NCs had a high antibacterial activity towards two most important infectious bacteria (i.e., Escherichia coli and Staphylococcus aureus) and anticancer activity against human liver-carcinoma cells (HepG2). Later, it depended on time and concentration of Ag–ZnO NCs. The cytotoxicity properties of Ag–ZnO NCs were also studied against NIH-3T3 as a normal cell, where the results verified the lower cell toxicities of nanocomposite than the HepG2.     

Fabrication of ZnO@Plant Polyphenols/Cellulose as Active Food Packaging and Its Enhanced Antibacterial Activity

To investigate the efficient use of bioresources and bioproducts, plant polyphenol (PPL) was extracted from larch bark and further applied to prepare ZnO@PPL/Cel with cellulose to examine its potential as an active package material. The structure and morphology were fully characterized by XRD, SEM, FTIR, XPS and Raman spectra. It was found that PPL is able to cover ZnO and form a coating layer. In addition, PPL cross-links with cellulose and makes ZnO distribute evenly on the cellulose fibers. Coating with PPL creates a pinecone-like morphology in ZnO, which is constructed by subunits of 50 nm ZnO slices. The interactions among ZnO, PPL and cellulose have been attributed to hydrogen bonding, which plays an important role in guiding the formation of composites. The antibacterial properties against Gram-negative Escherichia coli (E. coli) and Gram-positive Staphylococcus aureus (S. aureus) were tested by the inhibition zone method. Our composite ZnO@PPL/Cel has superior antibacterial activity compared to ZnO/Cel. The antibacterial mechanism has also been elaborated on. The low cost, simple preparation method and good performance of ZnO@PPL/Cel suggest the potential for it to be applied as active food packaging.     

A Study of Zn-Ca Nanocomposites and Their Antibacterial Properties

This study aimed to develop Ca²⁺ doped ZnO nanoparticles (NPs) and investigate their antibacterial properties against microorganisms of dental interest. Zn-Ca NPs were synthesized by the sol-gel method with different concentrations of Ca²⁺ (1, 3, and 5 wt. %) and subsequently characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), UV-vis spectroscopy and Fourier transform infrared spectroscopy (FT-IR). The Kirby–Bauer method was used to measure antibacterial effects. NPs showed the wurzite phase of ZnO and bandgap energies (Eg) from 2.99 to 3.04 eV. SEM analysis showed an average particle size of 80 to 160 nm. The treatments that presented the best antibacterial activity were Zn-Ca 3% and Zn-Ca 5%. ZnO NPs represent an alternative to generate and improve materials with antibacterial capacity for dental applications.     

Antibacterial responses of zinc oxide structures against Staphylococcus aureus, Pseudomonas aeruginosa and Streptococcus pyogenes

The antibacterial responses of zinc oxide (ZnO) structures against Staphylococcus aureus, Pseudomonas aeruginosa, and Streptococcus pyogenes were investigated. Two ZnO powder samples, one with rod-like (ZnO-1) and the other with plate-like (ZnO-2) structures, were characterized for their morphological, structural, and optical properties. The rods were 30–120 nm in diameter, and the plates were 40–100 nm thick. XRD results revealed the wurtzite crystallinity of ZnO with average crystallite sizes of 33.72 (ZnO-1) and 39.25 (ZnO-2) nm. ZnO-2 possessed a relatively higher green photoluminescence than that of ZnO-1, suggesting a relatively higher amount of oxygen vacancies in ZnO-2 structures. Optical density measurements showed that both ZnO samples inhibited the growth of S. aureus, P. aeruginosa, and S. pyogenes by 29–98% after 24 h of treatment. The most dramatic growth inhibition was observed in S. pyogenes with 96% and 98% inhibition for ZnO-1 and ZnO-2, respectively, leading to a probable bactericidal phenomenon. The toxicological effect on S. pyogenes was probably due to the absence of catalase, making the bacteria vulnerable to the harmful reactive oxygen species (ROS) released by ZnO. ZnO-1 induced higher inhibition toward S. aureus and P. aeruginosa than that of ZnO-2 because of the smaller particle size of rod structures compared to plate and slab structures. The adhesion of ZnO particles on the membrane of bacteria could be the underlying cause of zinc toxicity effect towards the bacteria. ZnO-1 possessed larger surface area and provided higher amount of zinc atom, thereby inducing higher level of toxicity toward the bacteria. Two possible mechanisms were proposed to explain the inhibition of bacteria, namely, ROS toxicity toward cellular constituents and interaction of zinc with bacteria membrane through adhesion of ZnO particle. Several ZnO morphological-antibacterial correlations were presented in this work.     

Sol–gel preparation and characterization of antibacterial and self-cleaning hybrid nanocomposite coatings

ZnO–TiO₂, SiO₂–TiO₂, and SiO₂–TiO₂–ZnO hybrid nanocomposite coatings were synthesized based on sol–gel precursors including tetramethoxysilane (TMOS), 3-glycidoxypropyl trimethoxysilane (GPTMS), tetra(n-butyl orthotitanate) (TBT), and zinc acetate dihydrate. The hybrid network was characterized by FTIR, FESEM, and EDAX techniques. Results indicated that inorganic particles’ size was of nanoorder (20–30 nm), with very uniform distribution and dispersion. Photocatalytic and self-cleaning activities of these coatings were further investigated by degradation of methylene blue in an aqueous solution (20 ppm) at visible light irradiation, indicating photocatalytic performance of the coatings containing ZnO and TiO₂ nanoparticles. The antibacterial effect of the coatings was investigated for inhibition and inactivation of cell growth, with the results showing the same antibacterial activity for ZnO–TiO₂ and SiO₂–TiO₂–ZnO coatings against Escherichia coli and Staphylococcus aureus; the activity was, however, higher than that of SiO₂–TiO₂ hybrid nanocomposite coatings.     

Study of antibacterial properties of polypropylene filled with surfactant‐coated silver nanoparticles

Medical applications require, in most cases, antibacterial protection. The use of silver (Ag) gives important antibacterial properties since silver is highly toxic for bacteria. In this research work, we have used silver nanoparticles (Ag NPs) with different surfactants, polyvinyl pyrrolidone (PVP) and oleic acid (OA) to facilitate dispersion. PP‐Ag NPs compounds were prepared by melt mixing, and the effects of the processing conditions on nanoparticles' dispersion were investigated by transmission electron microscopy (TEM). The antibacterial efficiency of PP‐Ag NPs compounds against Staphylococcus aureus ATCC 6538 and Escherichia coli ATCC 8379 was evaluated. Results show that good dispersion is obtained with rotating speeds in the 350–500 rpm range. TEM analysis reveals balanced dispersion and presence of some Ag NPs aggregates. Regarding antimicrobial properties, the use of PVP as surfactant leads to “significant” antimicrobial activity of 1.5 against Staphylococcus aureus and Escherichia coli; on other hand, the use of oleic acid (OA) as surfactant leads to strong protection against Staphylococcus aureus (antimicrobial activity between 2.5 and 3.3) but the overall protection against Escherichia coli is very low (lower than 1). Results show that the use of surfactants for Ag NPs has important effects on antibacterial properties of polypropylene filled with coated Ag NPs. POLYM. ENG. SCI., 2011. © 2011 Society of Plastics Engineers     

Enhanced the dispersibility and permeability of silver nanoparticles over rGO grafted by positively-charged polyethyleneimine toward broad-spectrum sterilization

Silver nanoparticles (Ag NPs) are used as antimicrobial agents due to their high-efficiency, broad-spectrum disinfection activity. However, the agglomeration and stability problems caused by excessive release of silver ions (Ag⁺) have severely restricted their developments. Herein, a novel silver/polyethyleneimine/reduced graphene oxide (Ag/PEI/rGO) antibacterial material featuring good dispersibility and permeability was rationally designed, thus benefiting for the capture of bacteria due to the introducing of highly-cationic PEI modifier and controllable release of biocidal agents (Ag⁺). Compared with Ag/rGO, the Ag/PEI/rGO has excellent stability and shows a more efficient sterilization efficacy against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) with 100% germicidal efficiency with low orders of dozens of ppm. In addition, the outstanding biocompatibility of this Ag/PEI/rGO antibacterial material endows it with promising potential in sterilization applications, which is expected to solve the infection problem caused by bacterial biofilm formation.     

Evaluation of the biocompatibility and growth inhibition of bacterial biofilms by ZnO,Fe3O4 and ZnO@Fe3O4 photocatalytic magnetic materials

Magnetic nanostructured materials have found numerous biomedical applications. However, the influence of a magnetic field on the inhibition of pathogenic microorganisms has been poorly explored. Zinc and Iron nano-structured oxides have been widely used due to their biocompatibility and their excellent optoelectronic and magnetic properties. Nevertheless, little effort has been devoted to demonstrate their antibacterial activity at doses that are not harmful to mammalians. In this work, ZnO, Fe₃O₄ (MNPs) and ZnO@Fe₃O₄ (NCs) were synthesized and fully characterized. The materials exhibit good antibacterial activity to inhibit the growth of Staphylococcus aureus (S. aureus) and Helicobacter pylori (H. pylori) both, as planktonic cells and as biofilms structures at low doses. The photocatalytic activity of the materials (NCs) was demonstrated when radiated suspensions of NCs and microorganisms (MOs) exhibited higher inhibition growth of MOs in comparison to non-radiated assays. The materials show better antibacterial activity for biofilm growth inhibition in comparison to commercially available antibiotics. Magnetic antimicrobial films were fabricated by in situ deposition of MNPs in Arabic gum (AG) solution. The films exert enhanced antibacterial activity against S. aureus growth due to Fe³⁺lixiviation and magnetic disruption. Regarding the biocompatibility of the materials, ZnO modifies significantly biochemical parameters in Wistar rats after acute administration. Our results show that the composite ZnO@Fe₃O₄ at low doses: (a) exerts an optimum inhibition on the biofilm formation of microorganisms due to its synergetic activity of lixiviation of ions and oxidative activity; (b) good biocompatibility of the composite with living cells. These properties suit ZnO@Fe₃O₄ as potential candidates for the development of new anti-biofilm formulation.     

Structural,optical, cytotoxicity,and antimicrobial properties of MgO,ZnO and MgO/ZnO nanocomposite for biomedical applications

In this study, MgO nanoparticles were successfully fabricated and incubated inside ZnO NPs to form MgO/ZnO nanocomposite for biomedical applications. The x-ray diffraction analysis of MgO, ZnO, and MgO/ZnO has shown the single-phase x-ray diffraction patterns through X'pert High score. The crystallite sizes were calculated as 18 nm, 42 nm, and 53 nm, respectively. The average particle size of MgO, ZnO, and MgO/ZnO nanopowders depicted from secondary electron images of field emission electron microscopy were 56 nm, 400 nm, and 450 nm, respectively. The presence of MgO NPs inside ZnO NPs was confirmed by transmission electron microscopy. The elemental dispersive spectroscopy of MgO, given the peaks of oxygen and magnesium, also showed only zinc and oxygen peaks in ZnO, which confirms no other impurities in MgO and ZnO powders. The elemental analysis of MgO/ZnO nanocomposite showed the peaks of Zinc and Oxygen, along with a tiny peak of Mg. The photoluminescence and UV–vis spectroscopy revealed the absorbance fluorescence limit of the nanomaterials. Fourier transform infrared spectroscopy confirmed the several groups present in the nanocomposite. The biocompatibility of MgO, ZnO, and MgO/ZnO was observed with human peripheral blood mononuclear cells. The cytotoxicity studies were also performed against human cancer (liver and breast) cell lines. The MgO, ZnO, and MgO/ZnO exhibited the antimicrobial properties against Escherichia coli and Staphylococcus aureus.     

Polydimethylsiloxane (PDMS)-based antibacterial organic–inorganic hybrid coatings

UV-curable antibacterial organic–inorganic hybrid coatings were prepared by sol–gel method. Triethoxysilane-terminated poly(dimethylsiloxane) (TESi-PDMS) as a new coupling agent to improve the compatibility between organic and inorganic phases was synthesized. PDMS-based urethane methacrylate oligomer was obtained by reacting isophorone diisocyanate with hydroxyethyl methacrylate and hydroxyl-terminated PDMS. The formulations were applied onto polycarbonate panels and then cured by UV radiation. Physical properties of UV-cured free films such as gel content, stress–strain, and conversion of acrylate double bond were examined. In addition, the antibacterial effects of the coatings were investigated. Nanosilver-containing formulations exhibited high antibacterial effect against Escherichia coli and Staphylococcus aureus. Thermogravimetric analysis indicated that thermal stability of the hybrids was significantly higher than the organic polymer. Contact angle measurement showed that addition of silane precursor increased the contact angle from 95° to 110°.     

The effect of Ag,ZnO, and CuO nanoparticles on the properties of the compatibilized polyethylene/thermoplastic starch blend films

In this study, the effects of Ag, ZnO, and CuO nanoparticles (NPs) on the mechanical, thermal, and biodegradability properties of the compatibilized polyethylene (PE)/thermoplastic starch (TPS) blends were investigated. Polyethylene-grafted maleic anhydride (PE-g-MA) was used as the compatibilizer. The compatibilized PE/TPS blends with different NPs were prepared by melt mixing method in a laboratory scale extruder and then pressurized in the press machine. The use of ZnO NP together with the compatibilizer in PE/TPS-based films significantly increased the tensile stress values. The use of different type NPs did not cause any significant change in the thermal stability of PE/TPS-based films. However, the effects of NPs were observed on the TPS degradation steps. The prepared films with different NPs showed an antibacterial activity between 60% and 70%. The highest crystallinity value was obtained in Ag NP containing films, among others. According to scanning electron microscopy analysis, better distribution was observed for ZnO and Ag NPs than CuO NP. In general, it can be said that the addition of NPs to PE/TPS-based blends significantly reduces the partial biodegradability of the resulting films.