共查询到20条相似文献,搜索用时 62 毫秒
1.
不饱和聚酯树脂的新进展 总被引:1,自引:0,他引:1
综述了近年来不饱和聚酯树脂的发展及应用。纳米材料在不饱和聚酯树脂中的应用为不饱和聚酯树脂改性提供了新的发展方向。水性光引发不饱和聚酯树脂的研究使不饱和聚酯树脂向绿色环保迈进。 相似文献
2.
3.
不饱和聚酯树脂国外近十年研究进展 总被引:6,自引:1,他引:6
综述了不饱和聚酯树脂工业技术国外近十年来的研究进展,其中包括:低收缩性树脂、耐腐蚀树脂、强韧性树脂、低吸水型不饱和聚酯树脂、透明性不饱和聚酯树脂、低游离苯乙烯残量的不饱和聚酯树脂、PET型不饱和聚酯树脂、低挥发性树脂、胶衣树脂、发泡不饱和聚酯树脂、玻璃钢渔船专用树脂、耐热性UPR树脂和光固化UPR树脂。对不饱和聚酯树脂的改性及其阻燃技术国外研究进展也作了专门的论述。 相似文献
4.
综述了不同类型的生物质基不饱和聚酯树脂的研究进展,包括生物质二元酸、生物质二元醇、含生物质交联剂的不饱和聚酯树脂等。对上述生物质不饱和聚酯树脂的制备方法和合成条件等进行了概述,分析了生物质不饱和聚酯树脂的性能,并与石油基的不饱和聚酯树脂进行了比较。 相似文献
5.
采用丙烯酸树脂改性聚酯树脂,可制得综合性能好的装饰性漆,用于轻工产品、家用电器等,介绍了420~#丙烯酸改性聚酯树脂及其漆的生产工艺,比较了420~#丙烯酸改性聚酯树脂和未改性聚酯树脂的溶解性和混容性,并列举了420~#丙烯酸改性聚酯树脂及其漆的各项性能。 相似文献
6.
7.
8.
9.
10.
11.
12.
热灌装瓶用聚酯树脂开发研究 总被引:1,自引:0,他引:1
分析了热灌装瓶用聚酯树脂及制品瓶子,得到热灌装瓶用聚酯树脂应具备的特性、瓶口结晶和热定型工艺要求的结晶性能等参数,据此试合成了热灌装瓶用聚酯树脂。通过制瓶和对瓶子的检测,表明试合成的聚酯树脂能满足热灌装瓶用的要求。 相似文献
13.
20世纪60年代后期,国际上开始出现工业化生产的涂料用饱和聚酯与饱和聚酯涂料。中国从20世纪70年代开始发展饱和聚酯及其涂料,主要集中在生产溶剂型饱和聚酯树脂。油墨的基料是生产油墨的重要原料,它是合成树脂的一种。饱和聚酯树脂与醇酸树脂相似,用来作为油墨的连接料使用,其对颜料的润湿程度要好于其他类型树脂的连接料,并且对于生产色彩鲜艳的油墨大有好处。本研究采用熔融法与溶剂法相结合的工艺,合成出一类具有高Tg、快速干燥等特点,可应用于卷钢油墨的饱和聚酯。 相似文献
14.
以聚己内酯、新戊二醇与顺丁烯二酸酐合成了聚酯树脂,然后与六亚甲基二异氰酸酯(HDI)反应以提高支化度,引入有机硅后再同丙烯酸单体反应制得丙烯酸改性聚酯树脂。以此丙烯酸改性聚酯树脂和适量的颜填料为甲组分、拜耳3390固化剂为乙组分,开发了适用于海洋气候的钢结构表面防护涂层。研究了顺丁烯二酸酐含量、丙烯酸改性聚酯树脂羟基含量、n(─NCO)∶n(─OH)值和聚合条件对面漆性能的影响。当顺丁烯二酸酐的用量为聚酯树脂的5%,自制的丙烯酸改性聚酯树脂羟基含量为4.5%±0.3%,n(─NCO)∶n(─OH)=1.1~1.4时,所制备的丙烯酸改性聚酯树脂面漆配以环氧富锌底漆及环氧云母氧化铁中涂漆得到的涂层体系能够满足海上平台钢结构的防护要求。 相似文献
15.
16.
介绍了废PET醇解法制备聚酯/环氧混合型粉末涂料用聚酯树脂。讨论了聚酯树脂合成工艺的控制因素以及单体对涂膜性能的影响。试验结果表明:合成的聚酯树脂制备的粉末涂料的性能指标达到传统产品的性能指标要求,具有良好的经济和环保效益。 相似文献
17.
研究了利用聚酯下脚料生产对苯二甲酸型不饱和聚酯树脂的方法。分析了原料配比及工艺参数对产品性能的影响,将对苯二甲酸型不饱和聚酯的性能与邻苯二甲酸型不饱和聚酯及间苯二甲酸型聚酯的性能进行了比较。结论认为对苯二甲酸型不饱和聚酯树脂是一种性能良好的耐腐蚀树脂。 相似文献
18.
19.
Measurements were taken of the bulk rheological properties of concentrated suspensions of particulates in unsaturated polyester resins, using a cone-and-plate rheometer. The particulates used were clay, calcium carbonate, and milled glass fiber. With clay and milled glass fibers, shear-thinning behavior of suspensions was observed at low shear rates or low shear stresses as the concentration of particulates was increased, whereas concentrated suspensions of calcium carbonate exhibited Newtonian behavior over the range of shear stresses or shear rates investigated. The cone-and-plate rheometer was also used for measurements of the bulk rheological properties of various mixtures of polyester resin and low-profile additives. For low-profile additives, solutions, in styrene, of poly(vinyl acetate) (PVAc) and poly(methyl methacrylate) (PMMA) were used. It was found that the bulk viscosities of all mixtures of polyester resin and PVAc solution lie between those of the individual components, whereas the bulk viscosities of some mixtures of polyester resin and PMMA solution go through a minimum and a maximum, depending on the composition of the mixture. While all mixtures of polyester resin and PVAc solution exhibited negligible normal stress, some mixtures of polyester resin and PMMA solution exhibited noticeable normal stresses. It should be mentioned that polyester resin follows Newtonian behavior. It turned out that all mixtures of polyester resin and PVAc solution exhibited clear, homogeneous solutions, whereas mixtures of polyester resin and PMMA solution exhibited optical heterogeneity, i.e., turbidity. When polyethylene powders were used as low-profile additives, suspensions of polyester resin and polyethylene powders exhibited negative values of normal stress as the concentrations of suspension reached a critical value. When both filler and low-profile additive were put together in polyester resin, the rheological behavior became quite complex, indicating that some interactions exist between the filler and the low-profile additive. 相似文献
20.
新型耐腐蚀不饱和树脂的研制 总被引:3,自引:1,他引:2
介绍了用PET废料制备新型耐腐蚀不饱和树脂工艺,确定了配料及反应温度.对该不饱和树脂的热稳定性及耐腐蚀性进行了实验,其性能优于通用型不饱和树脂. 相似文献