The herpes simplex virus triplex protein, VP23, exists as a molten globule

Two proteins, VP19C (50,260 Da) and VP23 (34,268 Da), make up the triplexes which connect adjacent hexons and pentons in the herpes simplex virus type 1 capsid. VP23 was expressed in Escherichia coli and purified to homogeneity by Ni-agarose affinity chromatography. In vitro capsid assembly experiments demonstrated that the purified protein was functionally active. Its physical status was examined by differential scanning calorimetry, ultracentrifugation, size exclusion chromatography, circular dichroism, fluorescence spectroscopy, and 8-anilino-1-naphthalene sulfonate binding studies. These studies established that the bacterially expressed VP23 exhibits properties consistent with its being in a partially folded, molten globule state. We propose that the molten globule represents a functionally relevant intermediate which is necessary to allow VP23 to undergo interaction with VP19C in the process of capsid assembly.     

Molecular interactions between the HSV-1 capsid proteins as measured by the yeast two-hybrid system

HSV-1 B capsids are composed of seven major proteins, designated VP5, VP19C, 21, 22a, VP23, VP24, and VP26. VP indicates that the capsid protein is also a component of the infectious virion. Capsid proteins 21, 22a, and VP24 are specified by a single open reading frame (UL26) that encodes 635 amino acids. An objective of the work in our laboratory is to identify and map interactions among and between capsid proteins. In the present studies we employed the yeast GAL4 two-hybrid system developed by Fields and his colleagues (Nature 240, 245-246 (1989)) for this purpose. DNA corresponding to the capsid open reading frames was derived as a PCR product and fused to sequences of the GAL4 activation and DNA binding domains. Using this system each of the capsid proteins has been tested for interactions with all of the other capsid proteins. Three interactions have been identified: a relatively strong self-interaction between 22a molecules (residues 307-635 of UL26), bimolecular interactions between 22a and VP5, and another between VP19C and VP23. The interactions were detected by the expression of beta-galactosidase enzyme activity, and yielded 289, 86, and 63 units of enzyme activity, respectively. For the 22a self-interaction, elimination of residues 611-635 resulted in an approximately twofold decrease in enzyme activity. The C-terminal 25 amino acids of 22a were also essential for the bimolecular interaction between 22a and VP5.     

Virus-specific interaction between the human cytomegalovirus major capsid protein and the C terminus of the assembly protein precursor

We previously identified a minimal 12-amino-acid domain in the C terminus of the herpes simplex virus type 1 (HSV-1) scaffolding protein which is required for interaction with the HSV-1 major capsid protein. An alpha-helical structure which maximizes the hydropathicity of the minimal domain is required for the interaction. To address whether cytomegalovirus (CMV) utilizes the same strategy for capsid assembly, several glutathione S-transferase fusion proteins to the C terminus of the CMV assembly protein precursor were produced and purified from bacterial cells. The study showed that the glutathione S-transferase fusion containing 16 amino acids near the C-terminal end was sufficient to interact with the major capsid protein. Interestingly, no cross-interaction between HSV-1 and CMV could be detected. Mutation analysis revealed that a three-amino-acid region at the N-terminal side of the central Phe residue of the CMV interaction domain played a role in determining the viral specificity of the interaction. When this region was converted so as to correspond to that of HSV-1, the CMV assembly protein domain lost its ability to interact with the CMV major capsid protein but gained full interaction with the HSV-1 major capsid protein. To address whether the minimal interaction domain of the CMV assembly protein forms an alpha-helical structure similar to that in HSV-1, peptide competition experiments were carried out. The results showed that a cyclic peptide derived from the interaction domain with a constrained (alpha-helical structure competed for interaction with the major capsid protein much more efficiently than the unconstrained linear peptide. In contrast, a cyclic peptide containing an Ala substitution for the critical Phe residue did not compete for the interaction at all. The results of this study suggest that (i) CMV may have developed a strategy similar to that of HSV-1 for capsid assembly; (ii) the minimal interaction motif in the CMV assembly protein requires an alpha-helix for efficient interaction with the major capsid protein; and (iii) the Phe residue in the CMV minimal interaction domain is critical for interaction with the major capsid protein.     

Transinhibition of herpes simplex virus replication by an inducible cell-resident gene encoding a dysfunctional VP19c capsid protein

This study demonstrates that cells expressing a dysfunctional analog of a herpes simplex virus (HSV) capsid protein inhibits HSV replication. Vero cell lines expressing HSV-1 capsid protein VP19c/beta-galactosidase fusion proteins were constructed and tested for their kinetics of expression, intracellular location, and ability to interfere with HSV replication. Two chimeric genes were constructed for these studies. The larger chimeric gene encodes the amino terminal 327 amino acids (aa) of VP19c fused to the carboxy terminal 1026 aa of beta-galactosidase, and the shorter chimeric gene encodes VP19c aa 1-30 and 302-327 fused to the carboxy-terminal 1026 aa of beta-galactosidase. Cell lines V32G-1 and V32G-2 containing the larger and the shorter chimeric genes, respectively, were isolated after cotransfection with plasmid pSV2-neo DNA, cell selection, and limiting-dilution cloning. The chimeric VP19c/beta-galactosidase genes resident in V32G-1 and V32G-2 cell lines were induced by early gene products of superinfecting wild-type HSV-1 and HSV-2, but were not constitutively expressed. The hybrid proteins expressed in infected V32G-1 and V32G-2 cells both colocalized with infected cell protein 8 (ICP8) into virus-replicative compartments in the cell nuclei. HSV-1 and HSV-2 growth in V32G-1 cells (which express the larger chimeric gene) was significantly reduced compared to growth in V32G-2 and control Vero cells. The data suggest that the larger VP19c/beta-galactosidase hybrid protein interferes with virus capsid assembly or morphogenesis in a competitive manner. Results also demonstrate that a small portion of VP19c containing the predicted endoplasmic reticulum signal sequence for this capsid protein (aa 1-30) promotes incorporation of the VP19c/beta-galactosidase fusion proteins into nuclear viral replication compartments.     

Incorporation of the green fluorescent protein into the herpes simplex virus type 1 capsid

The herpes simplex virus type 1 (HSV-1) UL35 open reading frame (ORF) encodes a 12-kDa capsid protein designated VP26. VP26 is located on the outer surface of the capsid specifically on the tips of the hexons that constitute the capsid shell. The bioluminescent jellyfish (Aequorea victoria) green fluorescent protein (GFP) was fused in frame with the UL35 ORF to generate a VP26-GFP fusion protein. This fusion protein was fluorescent and localized to distinct regions within the nuclei of transfected cells following infection with wild-type virus. The VP26-GFP marker was introduced into the HSV-1 (KOS) genome resulting in recombinant plaques that were fluorescent. A virus, designated K26GFP, was isolated and purified and was shown to grow as well as the wild-type virus in cell culture. An analysis of the intranuclear capsids formed in K26GFP-infected cells revealed that the fusion protein was incorporated into A, B, and C capsids. Furthermore, the fusion protein incorporated into the virion particle was fluorescent as judged by fluorescence-activated cell sorter (FACS) analysis of infected cells in the absence of de novo protein synthesis. Cells infected with K26GFP exhibited a punctate nuclear fluorescence at early times in the replication cycle. At later times during infection a generalized cytoplasmic and nuclear fluorescence, including fluorescence at the cell membranes, was observed, confirming visually that the fusion protein was incorporated into intranuclear capsids and mature virions.     

Self-association of herpes simplex virus type 1 ICP35 is via coiled-coil interactions and promotes stable interaction with the major capsid protein

The ordered copolymerization of viral proteins to form the herpes simplex virus (HSV) capsid occurs within the nucleus of the infected cell and is a complex process involving the products of at least six viral genes. In common with capsid assembly in double-stranded DNA bacteriophages, HSV capsid assembly proceeds via the assembly of an outer capsid shell around an interior scaffold. This capsid intermediate matures through loss of the scaffold and packaging of the viral genomic DNA. The interior of the HSV capsid intermediate contains the viral protease and assembly protein which compose the scaffold. Proteolytic processing of these proteins is essential for and accompanies capsid maturation. The assembly protein (ICP35) is the primary component of the scaffold, and previous studies have demonstrated it to be capable of intermolecular association with itself and with the major capsid protein, VP5. We have defined structural elements within ICP35 which are responsible for intermolecular self-association and for interaction with VP5. Yeast (Saccharomyces cerevisiae) two-hybrid assays and far-Western studies with purified recombinant ICP35 mapped a core self-association domain between Ser165 and His219. Site-directed mutations in this domain implicate a putative coiled coil in ICP35 self-association. This coiled-coil motif is highly conserved within the assembly proteins of other alpha herpesviruses. In the two-hybrid assay the core self-association domain was sufficient to mediate stable self-association only in the presence of additional structural elements in either N- or C-terminal flanking regions. These regions also contain conserved sequences which exhibit a high propensity for alpha helicity and may contribute to self-association by forming additional short coiled coils. Our data supports a model in which ICP35 molecules have an extended conformation and associate in parallel orientation through homomeric coiled-coil interactions. In additional two-hybrid experiments we evaluated ICP35 mutants for association with VP5. We discovered that in addition to the C-terminal 25 amino acids of ICP35, previously shown to be required for VP5 binding, an additional upstream region was required. This region is between Ser165 and His234 and contains the core self-association domain. Site-directed mutations and construction of chimeric molecules in which the self-association domain of ICP35 was replaced by the GCN4 leucine zipper indicated that this region contributes to VP5 binding through mediating self-association of ICP35 and not through direct binding interactions. Our results suggest that self-association of ICP35 strongly promotes stable association with VP5 in vivo and are consistent with capsid formation proceeding via formation of stable subassemblies of ICP35 and VP5 which subsequently assemble into capsid intermediates in the nucleus.     

Increase of heat-shock protein and induction of gamma/delta T cells in peritoneal exudate of mice after injection of live Fusobacterium nucleatum

The herpes simplex virus-1 (HSV-1) capsid shell has 162 capsomers arranged on a T = 16 icosahedral lattice. The major capsid protein, VP5 MW = 149,075) is the structural component of the capsomers. VP5 is an unusually large viral capsid protein and has been shown to consist of multiple domains. To study the conformation of VP5 as it is folded into capsid promoters, we identified the sequence recognized by a VP5-specific monoclonal antibody and localized the epitope on the capsid surface by cryoelectron microscopy and image reconstruction. The epitope of mAb 6F10 was mapped to residues 862-880 by immunoblotting experiments performed with (1) proteolytic fragments of VP5, (2) GST-fusion proteins containing VP5 domains, and (3) synthetic VP5 peptides. As visualized in a three-dimensional density map of 6F10-precipitated capsids, the antibody was found to bind at sites on the outer surface of the capsid just inside the openings of the trans-capsomeric channels. We conclude that these sites are occupied by peptide 862-880 in the mature HSV-1 capsid.     

Improved fetal nucleated erythrocyte sorting purity using intracellular antifetal hemoglobin and Hoechst 33342

Three capsid proteins of SV40 (VP1, VP2, and VP3) were expressed in insect cells using recombinant baculoviruses. When the VP1 capsid protein was expressed alone or co-expressed with VP2 and VP3, virus-like particles (VLP) were produced. In the latter case, the minor capsid proteins, VP2 and VP3, were incorporated into the VLP. VLPs with and without VP2 and VP3, and the wild type SV40 virions were indistinguishable under electron microscope. The sedimentation coefficient, S20,w' obtained for the VLP consisting of VP1 alone (VP1-VLP) was 170 S, and that for the VLP consisting of all of the capsid proteins (VP1/2/3-VLP) was 174 S. Treatment of the VP1-VLP with a calcium ion chelating agent and a reducing agent caused dissociation of the VP1-VLP. The dissociated and purified VP1 proteins were identified as pentamers of VP1 based on the molecular weight determination by sedimentation equilibrium. The pentamers were shown to possess the ability to re-assemble into VLP which had the S20,w of 141S. The results are discussed in relation to the morphogenesis of SV40.     

Capsid structure of simian cytomegalovirus from cryoelectron microscopy: evidence for tegument attachment sites

We have used cryoelectron microscopy and image reconstruction to study B-capsids recovered from both the nuclear and the cytoplasmic fractions of cells infected with simian cytomegalovirus (SCMV). SCMV, a representative betaherpesvirus, could thus be compared with the previously described B-capsids of the alphaherpesviruses, herpes simplex virus type 1 (HSV-1) and equine herpesvirus 1 (EHV-1), and of channel catfish virus, an evolutionarily remote herpesvirus. Nuclear B-capsid architecture is generally conserved with SCMV, but it is 4% larger in inner radius than HSV-1, implying that its approximately 30% larger genome should be packed more tightly. Isolated SCMV B-capsids retain a relatively well preserved inner shell (or "small core") of scaffolding-assembly protein, whose radial-density profile indicates that this protein is approximately 16-nm long and consists of two domains connected by a low-density linker. As with HSV-1, the hexons but not the pentons of the major capsid protein (151 kDa) bind the smallest capsid protein (approximately 8 kDa). Sodium dodecyl sulfate-polyacrylamide gel electrophoresis showed cytoplasmic B-capsid preparations to contain proteins similar in molecular weight to the basic phosphoprotein (approximately 119 kDa) and the matrix proteins (65 to 70 kDa). Micrographs revealed that these particles had variable amounts of surface-adherent material not present on nuclear B-capsids that we take to be tegument proteins. Cytoplasmic B-capsids were classified accordingly as lightly, moderately, or heavily tegumented. By comparing the three corresponding density maps with each other and with the nuclear B-capsid, two interactions were identified between putative tegument proteins and the capsid surface. One is between the major capsid protein and a protein estimated by electron microscopy to be 50 to 60 kDa; the other involves an elongated molecule estimated to be 100 to 120 kDa that is anchored on the triplexes, most likely on its dimer subunits. Candidates for the proteins bound at these sites are discussed. This first visualization of such linkages makes a step towards understanding the organization and functional rationale of the herpesvirus tegument.     

Interaction of polyomavirus internal protein VP2 with the major capsid protein VP1 and implications for participation of VP2 in viral entry

A complex of the polyomavirus internal protein VP2/VP3 with the pentameric major capsid protein VP1 has been prepared by co-expression in Escherichia coli. A C-terminal segment of VP2/VP3 is required for tight association, and a crystal structure of this segment, complexed with a VP1 pentamer, has been determined at 2.2 A resolution. The structure shows specific contacts between a single copy of the internal protein and a pentamer of VP1. These interactions were not detected in the previously described structure of the virion, but the location of VP2 in the recombinant complex is consistent with features in the virion electron-density map. The C-terminus of VP2/VP3 inserts in an unusual, hairpin-like manner into the axial cavity of the VP1 pentamer, where it is anchored strongly by hydrophobic interactions. The remainder of the internal protein appears to have significant flexibility. This structure restricts possible models for exposure of the internal proteins during viral entry.     

Assaying for structural variation in the parvovirus capsid and its role in infection

The capsid of canine parvovirus (CPV) was assayed for susceptibility to proteases and for structural variation. The natural cleavage of VP2 to VP3 in CPV full (DNA containing) particles recovered from tissue culture occurred within the sequence Arg-Asn-Glu-Arg Ala-Thr. Trypsin, chymotrypsin, bromelain, and cathepsin B all cleaved >90% of the VP2 to VP3 in full but not in empty capsids and did not digest the capsid further. Digestion with proteinase K, Pronase, papain, or subtilisin cleaved the VP2 to VP3 and also cleaved at additional internal sites, causing particle disintegration and protein degradation. Several partial digestion products produced by proteinase K or subtilisin were approximately 31-32.5 kDa, indicating cleavage within loop 3 of the capsid protein as well as other sites. Protease treatment of capsids at pH 5.5 or 7.5 did not significantly alter their susceptibility to digestion. The isoelectric point of CPV empty capsids was pH 5.3, and full capsids were 0.3 pH more acidic, but after proteolysis of VP2 to VP3, the pI of the full capsids became the same as that of the empty capsids. Antibodies against various capsid protein sequences showed the amino termini of most VP2 molecules were on the outside of full but not empty particles, that the VP1-unique sequence was internal, and that the capsid could be disintegrated by heat or urea treatment to expose the internal sequences. Capsids added to cells were localized within the cell cytoplasm in vesicles that appeared to be lysosomes. Microinjected capsids remained primarily in the cytoplasm, although a small proportion was observed to be in the nucleus after 2 h. After CPV capsids labeled with [35S]methionine were bound to cells at 0 degrees C and the cells warmed, little cleavage of VP1 or VP2 was observed even after prolonged incubation. Inoculation of cells with virus in the presence of proteinase inhibitors did not significantly reduce the infection.     

Autoproteolysis of herpes simplex virus type 1 protease releases an active catalytic domain found in intermediate capsid particles

The UL26 gene of herpes simplex virus type 1 (HSV-1) encodes a 635-amino-acid protease that cleaves itself and the HSV-1 assembly protein ICP35cd (F. Liu and B. Roizman, J. Virol. 65:5149-5156, 1991). We previously examined the HSV protease by using an Escherichia coli expression system (I. C. Deckman, M. Hagen, and P. J. McCann III, J. Virol. 66:7362-7367, 1992) and identified two autoproteolytic cleavage sites between residues 247 and 248 and residues 610 and 611 of UL26 (C. L. DiIanni, D. A. Drier, I. C. Deckman, P. J. McCann III, F. Liu, B. Roizman, R. J. Colonno, and M. G. Cordingley, J. Biol. Chem. 268:2048-2051, 1993). In this study, a series of C-terminal truncations of the UL26 open reading frame was tested for cleavage activity in E. coli. Our results delimit the catalytic domain of the protease to the N-terminal 247 amino acids of UL26 corresponding to No, the amino-terminal product of protease autoprocessing. Autoprocessing of the full-length protease was found to be unnecessary for catalysis, since elimination of either or both cleavage sites by site-directed mutagenesis fails to prevent cleavage of ICP35cd or an unaltered protease autoprocessing site. Catalytic activity of the 247-amino-acid protease domain was confirmed in vitro by using a glutathione-S-transferase fusion protein. The fusion protease was induced to high levels of expression, affinity purified, and used to cleave purified ICP35cd in vitro, indicating that no other proteins are required. By using a set of domain-specific antisera, all of the HSV-1 protease cleavage products predicted from studies in E. coli were identified in HSV-1-infected cells. At least two protease autoprocessing products, in addition to fully processed ICP35cd (ICP35ef), were associated with intermediate B capsids in the nucleus of infected cells, suggesting a key role for proteolytic maturation of the protease and ICP35cd in HSV-1 capsid assembly.     

Hexon-only binding of VP26 reflects differences between the hexon and penton conformations of VP5, the major capsid protein of herpes simplex virus

VP26 is a 12-kDa capsid protein of herpes simplex virus 1. Although VP26 is dispensable for assembly, the native capsid (a T=16 icosahedron) contains 900 copies: six on each of the 150 hexons of VP5 (149 kDa) but none on the 12 VP5 pentons at its vertices. We have investigated this interaction by expressing VP26 in Escherichia coli and studying the properties of the purified protein in solution and its binding to capsids. Circular dichroism spectroscopy reveals that the conformation of purified VP26 consists mainly of beta-sheets (approximately 80%), with a small alpha-helical component (approximately 15%). Its state of association was determined by analytical ultracentrifugation to be a reversible monomer-dimer equilibrium, with a dissociation constant of approximately 2 x 10(-5) M. Bacterially expressed VP26 binds to capsids in the normal amount, as determined by quantitative sodium dodecyl sulfate-polyacrylamide gel electrophoresis. Cryoelectron microscopy shows that the protein occupies its usual sites on hexons but does not bind to pentons, even when available in 100-fold molar excess. Quasi-equivalence requires that penton VP5 must differ in conformation from hexon VP5: our data show that in mature capsids, this difference is sufficiently pronounced to abrogate its ability to bind VP26.     

Proteolytic refolding of the HIV-1 capsid protein amino-terminus facilitates viral core assembly

After budding, the human immunodeficiency virus (HIV) must 'mature' into an infectious viral particle. Viral maturation requires proteolytic processing of the Gag polyprotein at the matrix-capsid junction, which liberates the capsid (CA) domain to condense from the spherical protein coat of the immature virus into the conical core of the mature virus. We propose that upon proteolysis, the amino-terminal end of the capsid refolds into a beta-hairpin/helix structure that is stabilized by formation of a salt bridge between the processed amino-terminus (Pro1) and a highly conserved aspartate residue (Asp51). The refolded amino-terminus then creates a new CA-CA interface that is essential for assembling the condensed conical core. Consistent with this model, we found that recombinant capsid proteins with as few as four matrix residues fused to their amino-termini formed spheres in vitro, but that removing these residues refolded the capsid amino-terminus and redirected protein assembly from spheres to cylinders. Moreover, point mutations throughout the putative CA-CA interface blocked capsid assembly in vitro, core assembly in vivo and viral infectivity. Disruption of the conserved amino-terminal capsid salt bridge also abolished the infectivity of Moloney murine leukemia viral particles, suggesting that lenti- and oncoviruses mature via analogous pathways.     

Localization of human cytomegalovirus structural proteins to the nuclear matrix of infected human fibroblasts

The intranuclear assembly of herpesvirus subviral particles remains an incompletely understood process. Previous studies have described the nuclear localization of capsid and tegument proteins as well as intranuclear tegumentation of capsid-like particles. The temporally and spatially regulated replication of viral DNA suggests that assembly may also be regulated by compartmentalization of structural proteins. We have investigated the intranuclear location of several structural and nonstructural proteins of human cytomegalovirus (HCMV). Tegument components including pp65 (ppUL83) and ppUL69 and capsid components including the major capsid protein (pUL86) and the small capsid protein (pUL48/49) were retained within the nuclear matrix (NM), whereas the immediate-early regulatory proteins IE-1 and IE-2 were present in the soluble nuclear fraction. The association of pp65 with the NM resisted washes with 1 M guanidine hydrochloride, and direct binding to the NM could be demonstrated by far-Western blotting. Furthermore, pp65 exhibited accumulation along the nuclear periphery and in far-Western analysis bound to proteins which comigrated with proteins of the size of nuclear lamins. A direct interaction between pp65 and lamins was demonstrated by coprecipitation of lamins in immune complexes containing pp65. Together, our findings provide evidence that major virion structural proteins localized to a nuclear compartment, the NM, during permissive infection of human fibroblasts.     

Molecular characterization of mouse-virulent poliovirus type 1 Mahoney mutants: involvement of residues of polypeptides VP1 and VP2 located on the inner surface of the capsid protein shell

Most poliovirus (PV) strains, including PV PV-1/Mahoney, are unable to cause paralysis in mice. Determinants for restriction of PV-1/Mahoney in mice have been identified by manipulating PV-1 cDNA and located on the viral capsid protein VP1. These determinants consist of a highly exposed amino acid sequence on the capsid surface corresponding to the B-C loop (M. Murray, J. Bradley, X. Yang, E. Wimmer, E. Moss, and V. Racaniello, Science 241:213-215, 1988; A. Martin, C. Wychowski, T. Couderc, R. Crainic, J. Hogle, and M. Girard, EMBO J. 7:2839-2847, 1988) and of residues belonging to the N-terminal sequence located on the inner surface of the protein shell (E. Moss and V. Racaniello, EMBO J. 10:1067-1074, 1991). Using an in vivo approach, we isolated two mouse-neurovirulent PV-1 mutants in the mouse central nervous system after a single passage of PV-1/Mahoney inoculated by the intracerebral route. Both mutants were subjected to two additional passages in mice, plaque purified, and subsequently characterized. The two cloned mutants, Mah-NK13 and Mah-NL32, retained phenotypic characteristics of the parental PV-1/Mahoney, including epitope map, heat lability, and temperature sensitivity. Mah-NK13 exhibited slightly smaller plaques than did the parental virus. The nucleotide sequences of the mutant genomes were determined, and mutations were identified. Mutations were independently introduced into the parental PV-1/Mahoney genome by single-site mutagenesis. Mutated PV-1/Mahoney viruses were then tested for their neurovirulence in mice. A single amino acid substitution in the capsid proteins VP1 (Thr-22-->Ile) and VP2 (Ser-31-->Thr) identified in the Mah-NK13 and Mah-NL32 genomes, respectively, conferred the mouse-virulent phenotype to the mouse-avirulent PV-1/Mahoney. Ile-22 in VP1 was responsible for the small-plaque phenotype of Mah-NK13. Both mutations arose during the first passage in the mouse central nervous system. We thus identified a new mouse adaptation determinant on capsid protein VP1, and we showed that at least one other capsid protein, VP2, could also express a mouse adaptation determinant. Both determinants are located in the inside of the three-dimensional structure of the viral capsid. They may be involved in the early steps of mouse nerve cell infection subsequent to receptor attachment.     

Papillomavirus assembly requires trimerization of the major capsid protein by disulfides between two highly conserved cysteines

We have used viruslike particles (VLPs) of human papillomaviruses to study the structure and assembly of the viral capsid. We demonstrate that mutation of either of two highly conserved cysteines of the major capsid protein L1 to serine completely prevents the assembly of VLPs but not of capsomers, whereas mutation of all other cysteines leaves VLP assembly unaffected. These two cysteines form intercapsomeric disulfides yielding an L1 trimer. Trimerization comprises about half of the L1 molecules in VLPs but all L1 molecules in complete virions. We suggest that trimerization of L1 is indispensable for the stabilization of intercapsomeric contacts in papillomavirus capsids.     

Baculovirus expression of gene 6 of the IDIR strain of group B rotavirus (GBR): coding assignment of the major inner capsid protein

The polypeptide product of gene 6 of the IDIR strain of group B rotavirus was synthesized by means of a baculovirus expression system in order to confirm the coding assignment of the gene and to develop reagents broadly reactive with heterologous strains of Group B rotaviruses (GBR). Earlier experiments indicated that IDIR virus gene 6 encoded the group-specific, major inner capsid protein, but direct confirmation of this coding assignment was not previously reported. The expression of IDIR virus gene 6 from baculovirus recombinants resulted in production of a protein with an apparent molecular weight equivalent to that deduced from the gene sequence (44 kDa). In addition, larger recombinant proteins were also observed, and these appeared to be consistent in size with oligomers of the primary VP6 product. The expressed protein reacted with antibody directed against the IDIR agent and other strains of GBR, but no reaction was observed with antibody directed against group A rotavirus. Serologic reactivity was also observed between the gene 6 product and a monoclonal antibody directed against the GBR group-specific antigen. Antibody directed against the recombinant gene 6 product specifically reacted with the IDIR virus major inner capsid protein in an immunoblot format. These experiments conclusively demonstrated that IDIR virus gene 6 encoded the major inner capsid protein and confirmed the presence of group B-specific antigenic epitopes on the protein.     

Two dominant neutralizing antigenic determinants of canine parvovirus are found on the threefold spike of the virus capsid

The 25-nm diameter parvovirus capsid is assembled from 60 copies of a sequence common to the overlapping VP1 and VP2 proteins. Here we examine the epitope specificity's of 28 monoclonal antibodies (MAb) prepared against canine parvovirus (CPV), feline panleukopenia virus (FPV), and raccoon-dog parvovirus or blue (Arctic) fox parvovirus. Comparing the reactivity of those MAb with various MAb-selected escape mutants, or with natural variants of CPV or mink enteritis virus (MEV) which differ at known sequences, showed that the binding of 20 of those MAb was strongly affected by variations of two regions on the threefold spike of the CPV capsid. One region was adjacent to the tip of the threefold spike, and the second was around VP2 residue 300, on the shoulder of that structure. MAb recognizing both antigenic sites efficiently neutralized the virus infectivity and inhibited hemagglutination. Mutations leading to natural antigenic variation have also been observed in both those sites in naturally variant strains of CPV or MEV, suggesting that they are important antigenic structures on these parvoviruses. The bindings of several MAb were not affected by the mutations at those antigenic sites, indicating that they recognized other, and perhaps conserved, structures.