Green synthesis of α-Fe2O3 nanoparticles for photocatalytic application

In this study, the preparation of α-Fe₂O₃ nanoparticles using curcuma and tea leaves extract are reported. The curcuma and tea leaves are acted as a reductant and stabilizer. The crystal structure and particle size of the as-synthesized materials were measured through X-ray diffraction. X-ray diffraction patterns revealed that the as-prepared samples were α-Fe₂O₃ nanoparticles with well-crystallized rhombohedral structure and the crystallite sizes of the α-Fe₂O₃ nanoparticles are 4 and 5 nm. Scanning electron microscopy images showed that the prepared samples have spherical shape. The purity and properties of the as-synthesized α-Fe₂O₃ nanoparticles were measured by Raman spectroscopy. The chemical compositions of the as-prepared α-Fe₂O₃ nanoparticles have been analyzed by Fourier transform infrared spectroscopy. The absorption edge of the α-Fe₂O₃ nanoparticles are 561 and 551 nm. The photocatalytic activity of the α-Fe₂O₃ nanoparticles was measured by degradation of methylene orange and the α-Fe₂O₃ nanoparticles showed the excellent photocatalytic performance.     

Synthesis of maghemite (γ-Fe2O3) nanoparticles by thermal-decomposition of magnetite (Fe3O4) nanoparticles

In this research work, we prepared γ-Fe₂O₃ nanoparticles by thermal-decomposition of Fe₃O₄. The Fe₃O₄ nanoparticles were synthesized via co-precipitation method at room temperature. This simple, soft and cheap method is suitable for preparation of iron oxide nanoparticles (γ-Fe₂O₃; Fe₃O₄). The samples were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), transmission electron microscopy (TEM), vibrating sample magnetometer and differential scanning calorimeter (DSC). The XRD and FT-IR results indicated the formation of γ-Fe₂O₃ and Fe₃O₄ nanoparticles. The TEM images showed that the γ-Fe₂O₃ and Fe₃O₄ were spherical, and their size was 18 and 22 nm respectively. Magnetic properties have been measured by VSM at room temperature. Hysteresis loops showed that the γ-Fe₂O₃ and Fe₃O₄ nanoparticles were super-paramagnetic.     

Chemical synthesis of faceted α-Fe2O3 single-crystalline nanoparticles and their photocatalytic activity

Faceted hematite nanocrystals have been synthesized via a hydrothermal route and their different morphologies can be tuned by appropriate stabilizer molecules. Detailed observation by high-resolution transmission electron microscopy and atomic force microscopy has revealed many terraces, steps, and kinks on the faceted surface of hematite nanoparticles, and thus, one growth mechanism of the terrace-step-kink model has been suggested to play a major role in determining the equilibrium morphology, together with effect of surface chemistry via the interaction between outer surfaces of iron and oxygen ions and functional groups. The photocatalytic activities were evaluated by decomposing rhodamine B dye. It has been shown that polyhedron hematite particles enclosed by high-index surface planes exhibited higher photoactivity. Density functional theory calculations revealed that the higher photoactivity originates from the more flat band edge in directions normal to the surface planes.     

Structure switch between α-Fe2O3, γ-Fe2O3 and Fe3O4 during the large scale and low temperature sol–gel synthesis of nearly monodispersed iron oxide nanoparticles

With same procedure and same starting materials, nearly monodispersed α-Fe₂O₃, γ-Fe₂O₃ and Fe₃O₄ nanoparticles were synthesized on an large scale of about 60 g in a single reaction through a low temperature sol–gel route. The simple preparation process includes the reactions between FeCl₂ and propylene oxide in ethanol solution at boiling point to form a sol and the following drying of the sol. The different iron oxide phases can be obtained just by changing of the drying conditions for the sol solution. The strategy developed in this study offers important advantages over the conventional routes for the synthesis of α-Fe₂O₃, γ-Fe₂O₃ and Fe₃O₄ nanoparticles, showing potential for its application in industrial production of iron oxides.     

Sonochemical fabrication and catalytic properties of α-Fe2O3 nanoparticles

In this study, α-Fe₂O₃ (hematite) nanoparticles were synthesised by a sonochemical method. The influence of different factors such as chemical composition of the precursors, atmosphere of the reactions and type of the sonicator on the chemical formula, crystallinity, morphology and size of the obtained products were investigated. Powder X-ray diffraction, scanning electron microscopy and IR spectroscopy, were used to characterise the nanostructures. The catalytic tests were performed in the reaction of methyl phenyl sulphide oxidation. The results exhibit the good catalytic performance of the as-prepared α-Fe₂O₃ nanoparticles.     

Green synthesis of mesoporous hematite (α-Fe2O3) nanoparticles and their photocatalytic activity

A green synthesis method for the preparation of mesoporous α-Fe₂O₃ nanoparticles has been developed using the extract of green tea (camellia sinensis) leaves. This simple and one-step method can suitably be scaled up for large-scale synthesis. The as-prepared mesoporous nanoparticles were characterized by SEM, TEM, XRD, XPS, Raman, UV–visible spectroscopy and N₂ adsorption analysis. The nanoparticles were highly pure and well crystallized with an average particle size of 60 nm. The photocatalytic activity of nanoparticles was evaluated by the amount of hydroxyl radical formation under visible light irradiation detected by fluorescence spectroscopy. The as-prepared α-Fe₂O₃ showed two times higher activity than commercial α-Fe₂O₃ in term of hydroxyl radical formation and enhanced performance in a photoelectrochemical cell. Also, a plausible mechanism for the formation of mesoporous α-Fe₂O₃ has been suggested.     

Hydrothermal synthesis of Fe3O4 and α-Fe2O3 nanocrystals as anode electrode materials for rechargeable Li-ion batteries

This paper describes a facile, economical and environment-friendly hydrothermal method of fabricating Fe₃O₄ and α-Fe₂O₃ nanoparticles at 180 °C for 12 h, respectively. The as-obtained products were characterized in detail. X-ray powder diffraction and transmission electron microscopy were used to investigate the products’ properties of crystal form, size, and morphology. The results showed the Fe₃O₄ and α-Fe₂O₃ nanocrystals’ diameter were about 5 and 20 nm, respectively. Moreover, the electrochemical performances of the Fe₃O₄ and α-Fe₂O₃ nanoparticles as anode materials for Li-ion batteries were also evaluated. The first-discharge capacities of Fe₃O₄ and α-Fe₂O₃ nanocrystals were 1,380 and 1,280 mAh g^?1, and stabled about 96 and 75 mAh g^?1 after 20 cycles, respectively. These materials offer substantial promise for developing alternative, high capacity negative electrodes for safer lithium batteries as energy storage and conversion materials.     

Facile synthesis of α-Fe2O3 nanodisk with superior photocatalytic performance and mechanism insight

Abstract

Intrinsic short hole diffusion length is a well-known problem for α-Fe₂O₃ as a visible-light photocatalytic material. In this paper, a nanodisk morphology was designed to remarkably enhance separation of electron-hole pairs of α-Fe₂O₃. As expected, α-Fe₂O₃ nanodisks presented superior photocatalytic activity toward methylene blue degradation: more than 90% of the dye could be photodegraded within 30 min in comparison with a degradation efficiency of 50% for conventional Fe₂O₃ powder. The unique multilayer structure is thought to play a key role in the remarkably improved photocatalytic performance. Further experiments involving mechanism investigations revealed that instead of high surface area, ·OH plays a crucial role in methylene blue degradation and that O^·2? may also contribute effectively to the degradation process. This paper demonstrates a facile and energy-saving route to fabricating homogenous α-Fe₂O₃ nanodisks with superior photocatalytic activity that is suitable for the treatment of contaminated water and that meets the requirement of mass production.     

Facile synthesis of α-Fe2O3 nanodisk with superior photocatalytic performance and mechanism insight

Intrinsic short hole diffusion length is a well-known problem for α-Fe₂O₃ as a visible-light photocatalytic material. In this paper, a nanodisk morphology was designed to remarkably enhance separation of electron-hole pairs of α-Fe₂O₃. As expected, α-Fe₂O₃ nanodisks presented superior photocatalytic activity toward methylene blue degradation: more than 90% of the dye could be photodegraded within 30 min in comparison with a degradation efficiency of 50% for conventional Fe₂O₃ powder. The unique multilayer structure is thought to play a key role in the remarkably improved photocatalytic performance. Further experiments involving mechanism investigations revealed that instead of high surface area, ·OH plays a crucial role in methylene blue degradation and that O^·2− may also contribute effectively to the degradation process. This paper demonstrates a facile and energy-saving route to fabricating homogenous α-Fe₂O₃ nanodisks with superior photocatalytic activity that is suitable for the treatment of contaminated water and that meets the requirement of mass production.     

Hydrazine method of synthesis of γ-Fe2O3 useful in ferrites preparation. Part IV – preparation and characterization of magnesium ferrite, MgFe2O4 from γ-Fe2O3 obtained from hydrazinated iron oxyhydroxides and iron (II) carboxylato-hydrazinates

Electro-magnetic properties and microstructural characterization of MgFe₂O₄ synthesized by a ceramic technique at 1000°C from iron oxides, consisting of mainly -Fe₂O₃ and traces of alpha-Fe₂O₃, prepared from iron ore rejects, are compared with the ferrite obtained from commercial alpha-Fe₂O₃. The sources of -Fe₂O₃ are hydrazinated iron (II) carboxylates and iron oxyhydroxides which autocatalytically decompose giving mainly -Fe₂O₃ of uniform particles of 10–30 nm (by scanning electron microscopy (SEM) studies) having high surface area. The ferrite synthesized from such nanoparticle size -Fe₂O₃ gave a porosity of 25% with grains ranging from 0–3 m. On the other hand, MgFe₂O₄ obtained from commercial alpha-Fe₂O₃ grains (of 1–2 m size) gave particles of 0–6 m with a porosity 42%. Saturation magnetization values 922–1168 G are found for MgFe₂O₄ from -Fe₂O₃ source while the alpha-Fe₂O₃ source gave the lowest value, 609. The Curie temperature, T_c, from magnetic susceptibility, initial permeability and resistivity measurements indicated a highest T_c of 737 K for MgFe₂O₄ from alpha-Fe₂O₃, while lower values are found for the ferrite prepared from -Fe₂O₃.     

Top-down synthesis of mesocrystalline α-Fe2O3 submillimeter-sized rhombohedrons

ABSTRACT

Here, we focus on the obtaining of mesocrystalline submillimeter-sized (150/50 µm) rhombohedral hematite (α-Fe₂O₃) by thermal treatment in air of single crystalline submillimeter-sized (150/50 µm) rhombohedrons of ferrous carbonate (FeCO₃). Mass spectrometer-coupled thermogravimetric analysis and TGA-MS revealed the chemical reactions occurring during the thermal treatment of ferrous carbonate sample. The X-ray Diffraction (XRD) data sustain that the final product is hematite. The XRD line-profile analysis indicates that the resulted hematite is built of individual ordered crystallites with 66 ± 5 nm average sizes, confirmed by scanning electron microscopy and transmission electron microscopy images. Small-angle x-ray scattering investigation of hematite sample was presented. The log-log plot of scattering intensity decay showed the same slope, α = ?3.76, corresponding to both high and low scattering vector regions; the fractal surface is D_s = 2.24. This fractality is extended over a range of sizes and can touch high molecular dimensionality. The internal morphology and the synthesis mechanism of the obtained hierarchical superstructure were described.     

Effect of mechanical activation on the synthesis of α-Fe2O3-Cr2O3 solid solutions

Continuous -Fe₂O₃-Cr₂O₃ solid solution series have been synthesized by two methods: (i) direct heating of coprecipitated hydroxides, and (ii) mechanical pre-treatment followed by heating. It is shown that mechanical treatment leads to a decrease in the preparation temperature of the solid solutions to 623 K. The formation of a continuous solid solution series by direct heating begins only at 773 K. The formation of the solid solutions was established by X-ray diffraction analysis, infrared and Mössbauer spectroscopy. The decrease in synthesis temperature of the -Fe₂O₃-Cr₂O₃ solid solutions is attributed to activation of the samples during their mechanical treatment. The samples obtained have large specific surface areas (up to 130 m² g^–1).     

Influence of different materials on the microstructure and optical band gap of α-Fe2O3 nanoparticles

Composites of hematite (α-Fe₂O₃) nanoparticles with different materials (NiO, TiO₂, MnO₂ and Bi₂O₃) were synthesized. Effects of different materials on the microstructure and optical band gap of α-Fe₂O₃ nanoparticles were studied. Crystallite size and strain analysis indicated that the pure α-Fe₂O₃ nanoparticles were influenced by the presence of different materials in the composite sample. Crystallite size and strain estimated for all the samples followed opposite trends. However, the value of direct band gap decreased from ～2.67 eV for the pure α-Fe₂O₃ nanoparticles to ～2.5 eV for α-Fe₂O₃ composites with different materials. The value of indirect band gap, on the other hand, increased for all composite samples except for α-Fe₂O₃/Bi₂O₃.     

Fe(OH)2微波快速热解制备γ-Fe2O3

用硫酸亚铁为原料加NH3·H2O得到的Fe(OH)2作前驱物,在有CO32-存在下进行微波快速热解可直接得到γ-Fe2O3.与常规的热处理方式相比发现,微波热解产物的分散性较好且粒径减小.而在无CO32-存在时进行微波热解,产物为α-Fe2O3.另外用xRD、TEM等方法对产物进行了表征.     

Simple and rapid synthesis of α-Fe2O3 nanowires under ambient conditions

We propose a simple method for the efficient and rapid synthesis of one-dimensional hematite (α-Fe₂O₃) nanostructures based on electrical resistive heating of iron wire under ambient conditions. Typically, 1–5 μm long α-Fe₂O₃ nanowires were synthesized on a time scale of seconds at temperatures of around 700 ° ⊂. The morphology, structure, and mechanism of formation of the nanowires were studied by scanning and transmission electron microscopies, energy dispersive X-ray spectroscopy, X-ray photoelectron spectroscopy, and Raman techniques. A nanowire growth mechanism based on diffusion of iron ions to the surface through grain boundaries and to the growing wire tip through stacking fault defects and due to surface diffusion is proposed. Electronic Supplementary Material  Supplementary material is available for this article at and is accessible for authorized users.     

Thermal decomposition synthesis of 3D urchin-like α-Fe2O3 superstructures

Urchin-like α-Fe₂O₃ superstructures have been deposited on Si substrate using thermal decomposition FeCl₃ solution at 200–600 °C in the oven. The morphologies and structures of the synthesized urchin-like superstructures have been characterized by transmission electron microscopy (TEM), scanning electron microscopy (SEM), and X-ray diffraction (XRD). The results show that urchin-like α-Fe₂O₃ superstructures were a polycrystal with the rhombohedral structure and typical diameters of 16–20 nm and lengths up to 1.0 μm. The as-prepared α-Fe₂O₃ superstructures have a high Brunauer–Emmett–Teller (BET) surface area of about 60.24 m²/g. The photoluminescence spectrum of the urchin-like α-Fe₂O₃ superstructures consists of one weak emission peak at 548 nm (2.26 eV). A possible new mechanism for the formation of the urchin-like superstructures was also preliminarily discussed.     

Hydrothermal synthesis of monodisperse dodecahedron α-Fe2O3 nanocrystals with high photocatalytic activity

Novel α-Fe₂O₃ dodecahedron nanocrystals were prepared by a facile one-step hydrothermal method without using any templates. The samples were analyzed by X-ray diffraction, scanning electron microscopy, and transmission electron microscopy, respectively. The results revealed that the as-prepared nanocrystals with the average diameters of 200 nm are well-shaped symmetric hexagonal bipyramidal structure. The homogeneous dodecahedron nanoparticles were obtained by optimizing the experimental conditions including reaction temperatures and time. A possible formation mechanism was also proposed. To demonstrate potential applications, the photocatalytic activity of the as-prepared samples was evaluated by photo-degradation of rhodamine B from aqueous solution at room temperature. Results show that the α-Fe₂O₃ dodecahedron with exposed (012) plane exhibits significantly improved photocatalytic activities for degradation of rhodamine B in aqueous solution under visible light irradiation.     

Low temperature synthesis of Co3O4 and (Co1−xMnx)3O4 spinels nanoparticles

The (Co_1?xMn_x)₃O₄ solid solution have been synthesized in water at 60 °C by soda addition to a cationic solution. XRD patterns show that spinel oxide has been obtained except for pure cobalt composition which exhibits also the presence of hydroxide and oxy-hydroxide. Therefore, to reach this composition, a different synthesis route has been developed: the cationic solution is added to the soda and for the first time Co₃O₄ nanoparticles have been synthesized by a direct precipitation in aqueous solution at low temperature. For each composition, the particles are well crystallized and exhibit a size close to 50 nm. Each particle is composed by several crystallographic domains of about 10 nm. The cubic to tetragonal transition reported in the literature for x = 0.46 is observed in between x = 0.33 and x = 0.50. Raman spectra show that substitution of Co by Mn, in the cubic phase, introduces a random high disorder. In the tetragonal phase, occupation of the octahedral site remains a random occupation, while the tetrahedral site seems to be preferentially occupied by Co ions. All these results show that the precipitation is a simple, fast and safe process to synthesize pure phase of (Co_1?xMn_x)₃O₄ spinel solid solution in aqueous media at low temperature.     

Controlled synthesis of mesoporous α-Fe2O3 nanorods and visible light photocatalytic property

Porous α-Fe₂O₃ nanorods with typical pore size of 2–4 nm were controlled prepared by a facile hydrothermal process of Fe(NO₃)₃·9H₂O aqueous solution in the presence of NaOH, followed by a calcination treatment. Contrast experiments indicate that the morphology and crystalline structure of the hydrothermal products depend greatly on the quantity of NaOH. Hematite nanoparticles and microplates were respectively obtained under conditions without or with excess NaOH. The porous α-Fe₂O₃ nanorods exhibit a high BET surface area of 105.1 m² g^?1 and a pore volume of 0.13 m³ g^?1. UV–vis measurement shows wide absorption to visible light and an obvious blue-shift of the adsorption edge due to the quantum size effect. The visible-light photocatalytic performances of the as-prepared samples were evaluated by photocatalytic decolorization of methylene blue at ambient temperature. The results indicate that the photocatalytic activity of the porous α-Fe₂O₃ nanorods is superior to hematite nanoparticles and platelets and exhibit good reusable feature. The photocatalytic process of porous structure is determined to be pseudo-first-order reaction with apparent reaction rate constant of 1.04 × 10^?2 min^?1. And the optimum photocatalyst dosage is 20 mg per 100 mL of dye solution. The porous α-Fe₂O₃ nanorods are considered potential photocatalyst for practical application due to the excellent photocatalytic behavior and good reusability.