Mechanical properties of poly(ether ether ketone)/poly(ether ketone) blends: Use of simple models relating normalized tensile parameters

In this study, mechanical properties such as tensile properties, flexural properties, and Izod impact strength of poly(ether ether ketone) (PEEK) and poly(ether ketone) (PEK) blends at PEK concentration from 0 to 0.42 volume fraction were studied. The blends of PEEK and PEK of different compositions were prepared by extrusion in a single‐screw extruder. With increase in the PEK concentrations, the tensile strength, flexural strength, and modulus increased whereas the tensile modulus and the impact strength decreased. Homogeneous dispersion and adhesion of PEK in PEEK was shown by the morphological studies. Crystallinity of blends influenced the tensile modulus and the impact strength. Using simple models to relate normalized tensile parameters where the data were divided by the crystallinity of the blends and of the PEEK matrix, respectively, supported the experimental results. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Intermolecular interaction and conformation in poly(ether ether ketone)/poly(ether imide) blends — An infrared spectroscopic investigation

The intermolecular interaction and the conformation in miscible blends of poly(ether ether ketone) (PEEK) and poly(ether imide) (PEI) have been investigated by Fourier-transform infrared (FTIR) spectroscopy. The intensity of the C=O out-of-phase stretching (1725 cm^–1) of PEI shows a minimum at 70 wt% PEI, whereas that of the C=O in-phase stretching (1778 cm^–1) is not perturbed by blending. These intensity variations have been attributed to the effect of blending on the coplanarity of the two imide rings bridged by the phenylene group. Change in coplanarity of these two imide rings alters the intensity of the C=O out-of-phase stretching, but it can not affect the intensity of the C=O in-phase stretching. When the two imide rings are perpendicular to each other, the intensity of the C=O out-of-phase stretching is shown to reach the minimum, corresponding to the observation at 70 wt% PEI. The difference spectra (blend - PEEK - PEI) reveal that the bands associated with the diphenyl ether groups in PEEK are modified by blending with PEI. It is proposed that the favorable interaction takes place between the oxygen lone-pair electrons of the ether group in PEEK and the electron-deficient imide rings in PEI.     

Hybrid fiber fabric composites from poly ether ether ketone and glass fiber

Poly ether ether ketone (PEEK) polymer was extruded into filaments and cowoven into unidirectional hybrid fabric with glass as reinforcement fiber. The hybrid fabrics were then converted into laminates and their properties with special reference to crystallization behavior has been studied. The composite laminates have been evaluated for mechanical properties, such as tensile strength, interlaminar shear strength (ILSS), and flexural strength. The thermal behavior of the composite laminates were analyzed using differential scanning calorimeter, thermogravimetric analyzer, dynamic mechanical analyzer (DMA), and thermomechanical analyzer (TMA). The exposure of the fabricated composite laminates to high temperature (400 and 500°C) using radiant heat source resulted in an improvement in the crystallanity. The morphological behavior and PEEK resin distribution in the composite laminates were confirmed using scanning electron microscope (SEM) and nondestructive testing (NDT). Although DMA results showed a loss in modulus above glass transition temperature (T_g), a fair retention in properties was noticed up to 300°C. The ability of the composite laminates to undergo positive thermal expansion as confirmed through TMA suggests the potential application of glass–PEEK composites in aerospace sector. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci 117:1446–1459, 2010     

Isothermal crystallization and melting behavior of short carbon fiber reinforced poly(ether ether ketone) composites

Films of short carbon fiber reinforced poly(ether ether ketone) (PEEK) composite were formed by compression molding pellets for 10 min at 380 °C under air. A heating stage was used to prepare isothermally treated PEEK composites before DSC scan. The dependence of degree of crystallinity on the heating rate (10–80 °C/min) was investigated for specimens crystallized at different temperatures. The results indicated that 50 °C/min was an optimum heating rate to suppress the reorganization and to avoid the superheating of high crystallinity specimens with the sample weight of 10 mg. The upper peak temperature of double-melting peaks continued to increase with crystallization temperature. This peak temperature was related to the transition from regime II to III. The phenomenon of lower crystallinity and higher melting temperature supports the interpretation that the upper melting peak corresponded to crystals growing during the earlier stage of isothermal crystallization.     

Synthesis and characterization of poly(ether amide ether ketone)/poly(ether ketone ketone) copolymers

A new monomer, N,N′‐bis(4‐phenoxybenzoyl)‐m‐phenylenediamine (BPPD), was prepared by condensation of m‐phenylenediamine with 4‐phenoxybenzoyl chloride in N,N‐dimethylacetamide (DMAc). A series of novel poly(ether amide ether ketone) (PEAEK)/poly(ether ketone ketone) (PEKK) copolymers were synthesized by the electrophilic Friedel‐Crafts solution copolycondensation of terephthaloyl chloride (TPC) with a mixture of diphenyl ether (DPE) and BPPD, over a wide range of DPE/BPPD molar ratios, in the presence of anhydrous AlCl₃ and N‐methylpyrrolidone (NMP) in 1,2‐dichloroethane (DCE). The influence of reaction conditions on the preparation of copolymers was examined. The copolymers obtained were characterized by different physicochemical techniques. The copolymers with 10–25 mol % BPPD were semicrystalline and had remarkably increased T_gs over commercially available PEEK and PEKK due to the incorporation of amide linkages in the main chains. The copolymers III and IV with 20–25 mol % BPPD had not only high T_gs of 184–188°C, but also moderate T_ms of 323–344°C, having good potential for the melt processing. The copolymers III and IV had tensile strengths of 103.7–105.3 MPa, Young's moduli of 3.04–3.11 GPa, and elongations at break of 8–9% and exhibited outstanding thermal stability and good resistance to organic solvents. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Influence of edge-distance ratio and hole-size ratio on bearing strength of poly(ether ether ketone) and its composites

The influence of edge-distance ratio (E/D) and hole-size ratio (S/D) on the bearing strength and failure modes of three kinds of poly(ether ether ketone) were investigated using the pin-type test method (ASTM E238). The results showed that bearing strength increased with increasing E/D and with increasing S/D. In addition, the bearing strength and failure mode depended on the polymer molecular weight and carbon fiber content. The study also showed that there is a transition region for S/D or E/D between 2 and 3 where the tension and a combination failure mode are mutually changed. © 1997 John Wiley & Sons, Inc. J Appl Polym Sci 66: 1847–1853, 1997     

Crystallization behavior and morphological characterization of poly(ether ether ketone)

The crystal structure and morphology of poly(ether ether ketone) (PEEK) was investigated using standard differential scanning calorimetry (DSC), flash DSC, optical microscopy, atomic force microscopy, and small angle X-ray scattering tools. The flash DSC results suggested that the double melting peaks phenomenon observed in conventional DSC work originated from the reorganization of PEEK crystals, which was due to the much faster recrystallization rate of PEEK than the DSC heating and cooling rate. A refined crystallization model to describe PEEK crystal structure formation was proposed. The refined crystallization model could help reconcile the discrepancy found between the bulk crystallinity measured by DSC and the linear crystallinity obtained from SAXS experiments by taking into account possible variation in crystal perfection within the lamellar structure. Simplified molecular dynamic modeling was carried out to support this model. Implications of the above findings to the fundamental understanding of structure–property relationships in PEEK were discussed.     

Rheology and properties of melt-processed poly(ether ether ketone)/multi-wall carbon nanotube composites

Poly(ether ether ketone) (PEEK)/multi-wall carbon nanotube (MWNT) composites containing up to 17 wt% filler were prepared using a twin screw extruder. Transmission electron microscopy (TEM) images reveal that the MWNTs were homogeneously dispersed in the PEEK matrix. Linear viscoelastic measurements show that both complex viscosity and moduli increase with increasing MWNT concentration. The storage modulus, G^′ exhibits a dramatic seven order increase in magnitude around 1 wt%, leading to a solid-like low-frequency behaviour at higher loadings; the effect can be attributed to network formation at a rheological percolation threshold. Rheotens measurements show that the melt strength also increases significantly on addition of nanotubes, however, the drawability decreases. An analytical Wagner model was used to calculate the apparent elongational viscosity over a wide range of elongational rates, and to reveal significant increases on addition of MWNTs, with a similar threshold behaviour. The electrical response is also dominated by percolation effects, increasing by nearly 10 orders of magnitude from 10⁻¹¹ to 10⁻¹ S/cm, on the addition of only 2 wt% MWNTs. In contrast, the thermal conductivity and tensile elastic modulus of the composites increased linearly with nanotube content, rising by 130% and 50%, at 17 wt% MWNTs, respectively.     

Miscibility and crystallization behavior of poly(ether ether ketone ketone)/poly(ether imide) blends

The miscibility and crystallization behavior of poly(ether ether ketone ketone) (PEEKK)/poly(ether imide) (PEI) blends prepared by melt‐mixing were investigated by differential scanning calorimetry. The blends showed a single glass transition temperature, which increased with increasing PEI content, indicating that PEEKK and PEI are completely miscible in the amorphous phase over the studied composition range (weight ratio: 90/10–60/40). The cold crystallization of PEEKK blended with PEI was retarded by the presence of PEI, as is apparent from the increase of the cold crystallization temperature and decrease of the normalized crystallinity for the samples anealed at 300°C with increasing PEI content. Although the depression of the apparent melting temperature of PEEKK blended with PEI was observed, there was no evidence of depression in the equilibrium melting temperature. The analysis of the isothermal crystallization at 313–321°C from the melt of PEEKK/PEI (100/0, 90/10, and 80/20) blends suggested that the retardation of crystallization of PEEKK is caused by the increase of the crystal surface free energy in addition to the decrease of the mobility by blending PEI with a high glass transition temperature. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 769–775, 2001     

Synthesis and characterization of poly(ether ketone ether ketone ketone)/poly(ether ether ketone ketone) copolymers containing naphthalene and pendant cyano groups

2,6‐Bis(β‐naphthoxy)benzonitrile (BNOBN) was synthesized by reaction of β‐naphthol with 2,6‐difluorobenzonitrile in N‐methyl‐2‐pyrrolidone (NMP) in the presence of KOH and K₂CO₃. Poly(ether ketone ether ketone ketone)(PEKEKK) /poly(ether ether ketone ketone) (PEEKK) copolymers containing naphthalene and pendant cyano groups were obtained by electrophilic Friedel‐Crafts polycondensation of terephthaloyl chloride (TPC) with varying mole proportions of 4,4′‐diphenoxybenzophenone (DPOBP) and 2,6‐bis(β‐naphthoxy)benzonitrile (BNOBN) using 1,2‐dichloroethane (DCE) as solvent and NMP as Lewis base in the presence of anhydrous AlCl₃. The resulting polymers were characterized by various analytical techniques, such as FTIR, DSC, TG, and WAXD. The results indicated that the crystallinity and melting temperature of the polymers decreased with increase in concentration of the BNOBN units in the polymer, the glass transition temperature of the polymers increased with increase in concentration of the BNOBN units in the polymer. Thermogravimetric studies showed that all the polymers were stable up to 536°C in N₂ atmosphere. The copolymers have good resistance to acidity, alkali, and organic solvents. Because of the melting temperature (T_m) depression with increase in the BNOBN content in the reaction system, the processability of the resultant coplymers could be effectively improved. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Isothermal degradation of poly(3‐hydroxybutyrate)/organically modified montmorillonite nanocomposites

Polymer nanocomposites consisted of biodegradable poly(3‐hydroxybutyrate) (PHB) and organically modified montmorillonite Cloisite25A (OMMT), prepared by the solution‐casting method, were isothermally degraded for 120 min at 230, 235, 240, and 245°C in the nitrogen atmosphere. The addition of OMMT increases the thermal stability of PHB, and the most pronounced effect has the addition of 7 wt% of OMMT. Kinetic analysis was performed using reduced time plots and model‐free isoconversional methods. The empirical kinetic triplets (E, A, and g(α)) for the isothermal degradation of pure PHB and PHB/OMMT nanocomposites were determined. POLYM. COMPOS., 2010. © 2009 Society of Plastics Engineers     

Preparation and properties of poly(ether ether ketone) composites reinforced by modified wollastonite grafting with silaneterminated poly(ether ether ketone) oligomers

Silane-terminated poly(ether ether ketone) oligomers were synthesized and grafted onto wollastonite (W) particles. The prepared grafted-wollastonite particles (g-W) were then incorporated into PEEK matrix via melt processing. Properties of the PEEK composites were investigated using differential scanning calorimetry (DSC), universal tester and rheometer. The researchers found the mechanical properties of the PEEK/g-W composites were markedly enhanced, complex viscosity of the PEEK/g-W composites increased, and both the peak crystallization temperature (T _c ) and crystalline fraction (χ _c ) of the PEEK composites with g-W were significant higher compared with those of the PEEK composites with W. It is our belief that these results are due to the strong interaction between the grafted-wollastonite particles and the PEEK matrix.     

Functionalization of multi‐walled carbon nanotubes and their effect on the tribological properties of poly(ether ether ketone) composites

A series of copolymers containing conjugated fluorene groups as a compatibilizer to improve the dispersion of multi‐walled carbon nanotubes (MWCNTs) were prepared and used to improve the wear resistance of poly(ether ether ketone)/graphite (PEEK/GP) composites. The solubility of MWCNTs had a maximum at a concentration ratio of 2:1 polymer:MWCNTs. Transmission electron microscopy indicated that polymer ? MWCNT interactions were capable of partially debundling the nanotubes in chloroform, with individual nanotubes or small bundles clearly observed. The tribological properties of PEEK composites incorporating the modified MWCNTs were investigated using a pin‐on‐disc apparatus and a block‐on‐ring apparatus. The PEEK composites had a lower frictional coefficient under the block‐on‐ring testing condition, but a lower wear rate was achieved in the pin‐on‐disc test. © 2017 Society of Chemical Industry     

Compatibility in immiscible poly(ether ether ketone)/poly(ether sulfone) blends

Both as-molded and annealed poly(ether ether ketone) (PEEK)/poly(ether sulfone) (PES) blends have been prepared by direct injection molding. The system has been found to be immiscible at all compositions; however, as a result mainly of the produced morphology, it surprisingly maintains to a very great extent the excellent mechanical performance of both of the pure components. This mechanical response is compared with that of the compression molded blends. The ductility of these blends when quenched appears close to the linear between that of the two components. Leaving aside possible morphological and excess free volume of mixing effects, it is in part attributed to the nature of the blend itself. © 1995 John Wiley & Sons, Inc.     

Synthesis and properties of poly(aryl ether ketone ketone)/poly(aryl ether ether ketone ketone) copolymers with pendant cyano groups

2,6‐Diphenoxybenzonitrile (DPOBN) was synthesized by reaction of phenol with 2,6‐difluorobenzonitrile in N‐methyl‐2‐pyrrolidone in the presence of KOH and K₂CO₃. Poly(aryl ether ketone ketone)/poly(aryl ether ether ketone ketone) copolymers with pendant cyano groups were prepared by the Friedel–Crafts electrophilic substitution reaction of terephthaloyl chloride with varying mole proportions of diphenyl ether and DPOBN using 1,2‐dichloroethane as solvent and N‐methyl‐2‐pyrrolidone as Lewis base in the presence of anhydrous AlCl₃. The resulting polymers were characterized by various analytical techniques, such as FT‐IR, differential scanning calorimeter, thermal gravimetric analysis, and wide‐angle X‐ray diffraction. The crystallinity and melting temperature of the polymers were found to decrease with increase in concentration of the DPOBN units in the polymer. Thermogravimetric studies showed that all the polymers were stable up to 514°C in N₂ atmosphere. The glass transition temperature was found to increase with increase in concentration of the DPOBN units in the polymer when the molar ratios of DPOBN to DPE ranged from 10/90 to 30/70. The copolymers containing 30–40 mol % of the DPOBN units exhibit excellent thermostability at (350 ± 10)°C and have good resistance to acidity, alkali, and organic solvents. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 3601–3606, 2007     

PPS/PEEK共混物的超临界CO_2微孔发泡研究

以超临界CO2为物理发泡剂通过固态间歇发泡法制备了不同共混比例的聚苯硫醚/聚醚醚酮(PPS/PEEK)微孔材料。采用差示扫描量热法探讨了PPS/PEEK共混物的热性能,通过扫描电子显微镜观察分析了共混组成和饱和压力对微孔材料泡孔结构与分布的影响规律,并对微孔材料的冲击强度、介电常数和动态力学性能进行了研究。结果表明,共混使PPS相和PEEK相的结晶度增大,共混物中的气体饱和浓度随着PEEK组分含量的增加而增大。与纯PPS和PEEK相比,共混物中形成致密的多级泡孔结构。饱和压力越大则微孔材料的泡孔密度越大,且泡孔尺寸越小。微孔发泡使PPS/PEEK共混物的冲击强度增大,介电常数和储能模量降低。     

Hollow fiber microfiltration membranes from poly(ether ether ketone) (PEEK)

A procedure for obtaining high performance large internal diameter (ID; >1 mm) hollow fiber microfiltration membranes from poly(ether ether ketone) (PEEK) is presented. A simple mixture of isomers of diphenylphthalate is a good solvent for employing the thermal‐phase inversion process to obtain PEEK membranes. Obtaining large ID hollow fibers with substantial transmembrane flux requires sufficient melt strength during spinning to prevent excessive draw of the extruding fiber. The use of a second leachable polymer to the blend satisfies the conditions, and polysulphone (PS) is found to provide superior membranes relative to either poly(etherimide) (PEI) or poly(ether sulphone) (PES) as a second polymer. PEEK membranes obtained by this process yield better chemical resistance to a concentrated warm surfactant/oil solution. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 72: 175–181, 1999     

Differential scanning calorimetry and infra-red crystallinity determinations of poly(aryl ether ether ketone)

The differential scanning calorimetry (d.s.c.) heating thermograms of 12 poly(aryl ether ether ketone) (PEEK) samples of varying degrees of crystallinity have been recorded. The relation found between the degree of crystallinity as determined by specific gravity measurements, and the melting enthalpy of the polymer, shows that recrystallization is occurring during a heating scan rate of 10°C min⁻¹. This implies that d.s.c. is not a convenient technique to assess PEEK crystallinity. The infra-red absorbance spectra of the same samples have also been examined in the range from 1030 to 880 cm⁻¹. The 965 cm⁻¹ band, up to now considered as indicative of the PEEK crystallinity, is shown to be practically independent of the degree of crystallinity above 15%. However, there is evidence to support the existence of a true i.r. crystalline band located at 947 cm⁻¹. It is also suggested that the 965 cm⁻¹ band is due to a normal vibration mode of a short segmental conformation, whose presence is favoured in the crystalline phase, but also in the amorphous zones nearest to the crystallite surface.     

Thermal behavior of poly(ether ketone ketone)/thermoplastic polyimide blends

The phase behavior and crystallization of poly(ether ketone ketone)/polyimide blends was investigated by differential scanning calorimetry and dynamic mechanical analysis, and chemical interactions in the blends were probed by Fourier‐transform infrared spectroscopy. Amorphous blends were miscible over the entire range of composition, although mixing was most favorable at higher thermoplastic polyimide concentrations. Blending suppressed crystallization, especially of the minor component, but crystallization of both components, however, did occur in most of the blends. While blends quenched from the melt exhibited only a single amorphous phase, melt crystallized blends appeared to possess two amorphous phases with different compositions. Shifts in the vibration frequencies of the carbonyl and imide bonds were inconsistent with the development of strong, specific intermolecular interactions, but may be explained by a disruption of the packing of the two homopolymers by nature of the mixing. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 1227–1235, 2004     

Synthesis of poly(ether ether ketone)-block-polyimide copolymer and its compatibilization for poly(ether ether ketone)/thermoplastic polyimide blends

Novel poly(ether ether ketone)-block-polyimide copolymers (PEEK-b-PI) with different block length were prepared by the polycondensation of amino-terminated poly(ether ether ketone) oligomer and anhydride-terminated polyamic acid oligomer. As the compatibility agent, PEEK-b-PI was added to the poly(ether ether ketone)/thermoplastic polyimide (PEEK/TPI) blend, and blends of PEEK/TPI/PEEK-b-PI were prepared by melt extrusion. Morphology observation showed the domain size of the dispersed phase was significantly reduced with the addition of PEEK-b-PI having optimized block length, which suggested reduced interfacial tension and enhanced interfacial adhesion. The compatibilizing effect was further proven by the change of the glass transition temperature of PEEK and TPI, which shifted closer to each other. As a result, the mechanical properties of PEEK/TPI blends were significantly improved with the addition of the PEEK-b-PI. In particular, 5 wt% content of PEEK-b-PI can increase the elongation at break of the blend by about 200%.