MgNb2O6陶瓷粉末的共沉淀法制备

以Mg(NO3)2、K8Nb6O19·10H2O为前驱体,以H3BO3做助剂,采用共沉淀法在650℃制备单相的MgNb2O6陶瓷粉末。该方法将MgNb2O6陶瓷的合成温度降低约500℃。通过XRD结合ICP-MS定量分析其物相组成。加入硼酸有利于推动合成MgNb2O6单相晶体的热力学过程。加入硼酸的量不同,合成的陶瓷粉末形貌不同。硼酸与前驱体粉末中的金属离子形成低共熔化合物,易于在较低温度下使前驱物粉体形成液相从而促进反应进行。     

锆钛酸锶的烧结及其介电性能表征

以四氯化钛、氧氯化锆、硝酸锶和氢氧化钠为原料,采用共沉淀法在25℃反应90℃陈化2h制备了锆钛酸锶(SrTixZr1-xO3)粉体,用X射线衍射(XRD)表征了锆钛酸锶粉体的物相.用透射电子显微镜表征了锆钛酸锶粉体的粒径.并采用干压成型法压制素坯进行烧结;确定了烧结制度为:升温速率3℃/min,1 400℃保温4h.对烧结后的陶瓷坯体进行介电性能表征,在1 kHz下SrTio.7 Zr0 3 O3陶瓷坯体的相对介电常数为135.6,介电损耗tanδ为24.4×10-3;SrTi0 5 Zro.5 O3陶瓷坯体的相对介电常数为122.3,介电损耗tanδ为137.38×10-3.     

粉体粒度对BaTiO_3陶瓷结构与电性能的影响

以采用共沉淀法制备的钛酸钡(BaTiO3)粉体为原料制备陶瓷。并利用XRD、DSC、SEM等分析手段对陶瓷材料的物相、相转变、显微结构进行表征,和利用电容测量仪、粒度分析仪等对陶瓷材料的电性能及粉体的粒度进行测试。研究了粒度对BaTiO3陶瓷微观结构和介电性能的影响。结果表明:随着预烧温度的提高,粉体的粒度增大,其陶瓷烧成温度也相应提高,并获得了优良的介温性能,粉体粒径为360nm的BaTiO3粉体经1290℃烧结后居里峰介电常数达到8119。     

粉体合成工艺对TiB_2–TiC复相陶瓷微观组织及力学性能的影响

分别以直接法和间接法碳硼热还原工艺合成的TiB_2–TiC复合粉体为原料,采用热压烧结工艺制备了共晶成分的TiB_2–44%TiC(摩尔分数)复相陶瓷,研究了粉体合成工艺和烧结温度对TiB_2–TiC复相陶瓷显微组织和力学性能的影响。结果表明:以直接法合成粉末为原料烧结的TiB_2–TiC复相陶瓷中,TiB_2晶粒多呈棒状、组织细小均匀;而以间接法合成粉末为原料制备的复相陶瓷中TiB_2晶粒多呈等轴状。随着烧结温度的升高,复相陶瓷致密度提高,晶粒长大,但力学性能变化不明显。以直接法合成复合粉末为原料,在烧结温度为2 000℃、压力为30 MPa、保温时间为1 h工艺条件下制备的TiB_2–TiC复相陶瓷综合性能最佳,其致密度、弹性模量、Vickers硬度、抗弯强度和断裂韧性分别为99.9%、537 GPa、19.0 GPa、598 MPa、5.3 MPa·m~(1/2)(压痕法)和11.6 MPa·m1/2(单边切口梁法)。TiB_2–TiC复相陶瓷主要的增韧机制为裂纹偏转和分叉。     

不同方法合成掺杂ZnO粉体制备ZnO压敏电阻

分别采用低温固相化学法和共沉淀法合成掺杂ZnO粉体,并用这两种粉体在不同温度下烧结制备了ZnO压敏电阻。借助XRD、SEM、TEM、BET等检测手段对粉体产物的性能进行了表征,采用XRD、SEM等手段对ZnO压敏陶瓷的物相、结构进行了分析,并对两种方法制备的粉体及压敏电阻的性能进行了比较研究。结果表明:采用低温固相化学法合成的粉体平均粒径为23.95 nm,用其制备ZnO压敏电阻的最佳烧结温度是1 080℃,其电位梯度为791.64 V/mm,非线性系数是24.36;采用共沉淀法合成的粉体平均粒径为188 nm,用其制备ZnO压敏电阻的最佳烧结温度是1 130℃,其电位梯度为330.99 V/mm、非线性系数是19.70,低温固相化学法制备的ZnO压敏电阻性能优于共沉淀法制备的ZnO压敏电阻。     

均相法和共沉淀法制备Nd：YAG透明陶瓷的对比研究

以Al(NO3)3·9H2O、Y2O3、Nd2O3、尿素和NH4HCO3为主要原料,分别采用均相法和共沉淀法制备了Nd:YAG纳米粉体和透明陶瓷。对比研究了两种方法的粉体的制备工艺,物相,形貌和陶瓷的透过率、形貌。结果发现,均相法制备的前驱体疏松,1200℃煅烧时先形成YAP相,后形成纯相粉体。共沉淀法制备的前驱体较硬,1000℃锻烧直接形成纯相粉体。最后,两种方法制备的陶瓷素坯经真空烧结、处理后,在1064 nm的透过率达80%。共沉淀法条件温和,易于得到纯相YAG,更适合于工业化开发。     

BST-MT复相陶瓷的微观形貌和相组成分析

以硝酸钡、硝酸锶和钛酸丁酯为原料,采用草酸盐共沉淀法制备了钛酸锯钡(Ba0.6Sr0.4TiO3,BST)纳米粉体.用固相混合法制备了BST-钛酸镁(Ba0.6Sr0.4TiO3-MgTiO3,BST-MT)复相陶瓷.用扫描电镜观察BST纳米粉体和BST-MT复相陶瓷的形貌.通过X射线衍射分析BST纳米粉体和BST-MT复相陶瓷的相组成.结果表明:草酸盐共沉淀法合成了立方晶相的BST粉体,该纳米粉体具有较好的分散性且形貌规整.用BST粉体与MgTiO3复合所制备的BST-MT复相陶瓷由等轴状和长柱状2种晶粒组成.能谱分析结果表明:等轴状晶粒为BST,长柱状晶粒为MgTiO3;该BST-MT复相陶瓷具有良好的介电常数-温度特性.     

草酸盐共沉淀法制备高性能无铅PTC粉体

本实验采用草酸盐共沉淀法制备含掺杂物的高性能PTC粉体.在不同的烧结温度下,通过X射线衍射、扫描电镜、激光粒度仪等测试分析了其粉体的晶化程度、基体组成、晶粒尺寸,研究了草酸盐共沉淀法的工艺参数对PTC粉体微观结构的影响,得出以下一些数据：草酸氧钛络合物形成的pH值应控制在2.5-3;共沉淀反应的时间约为30分钟;共沉淀反应的温度约为60℃;沉淀洗涤4次;前驱体的煅烧温度约为800℃,时间为1小时.     

化学共沉淀法制备纳米铋掺杂氧化锡

以SnCl4.5H2O和Bi(NO3)3.5H2O为原料,氨水为沉淀剂,采用化学共沉淀法制备了铋掺杂氧化锡(BTO)纳米粉体,考察了反应温度、滴定终点pH、铋掺杂量、煅烧温度和分散剂PEG-600对所得的纳米BTO粉体物相、晶粒度和形貌的影响,对粉末的前驱体进行综合热分析(TG-DTA),用X射线衍射(XRD)、扫描电镜(SEM)对产物的结构和形貌进行表征,得到共沉淀法制备纳米BTO粉体的最佳条件:反应温度60℃,滴定终点pH=3,煅烧温度600℃;该条件下制得BTO粉体的电阻率最小为3.48Ω.cm。     

化学共沉淀法制备纳米铋掺杂氧化锡的影响因素研究

以SnCl4.5H2O和Bi(NO3)3.5H2O为原料,氨水为沉淀剂,采用化学共沉淀法制备了铋掺杂氧化锡（BTO）纳米粉体,研究了反应温度、滴定终点pH值、铋掺杂量,煅烧温度和分散剂PEG-600对所得的纳米BTO粉体物相、晶粒度和形貌的影响,对粉末的前驱体进行综合热分析（TG-DTA）,用X-射线衍射（XRD）,扫描电镜(SEM)对产物的结构和形貌进行表征,得到共沉淀法制备纳米BTO粉体的最佳条件：反应温度60℃,滴定终点pH值为3,煅烧温度600℃;该条件下制得BTO粉体的电阻率最小为3.48Ω•cm。     

Insect antifeedant properties of anthranoids from the genusVismia

Vismiones and ferruginins, representatives of a new class of lypophilic anthranoids from the genusVismia were found to inhibit feeding in larvae of species ofSpodoptera, Heliothis, and inLocusta migratoria.     

Methyl 2,4,6-decatrienoates Attract Stink Bugs and Tachinid Parasitoids

Halyomorpha halys (Stål) (Pentatomidae), called the brown marmorated stink bug (BMSB), is a newly invasive species in the eastern USA that is rapidly spreading from the original point of establishment in Allentown, PA. In its native range, the BMSB is reportedly attracted to methyl (E,E,Z)-2,4,6-decatrienoate, the male-produced pheromone of another pentatomid common in eastern Asia, Plautia stali Scott. In North America, Thyanta spp. are the only pentatomids known to produce methyl 2,4,6-decatrienoate [the (E,Z,Z)-isomer] as part of their pheromones. Methyl 2,4,6-decatrienoates were field-tested in Maryland to monitor the spread of the BMSB and to explore the possibility that Thyanta spp. are an alternate host for parasitic tachinid flies that use stink bug pheromones as host-finding kairomones. Here we report the first captures of adult and nymph BMSBs in traps baited with methyl (E,E,Z)-2,4,6-decatrienoate in central Maryland and present data verifying that the tachinid, Euclytia flava (Townsend), exploits methyl (E,Z,Z)-2,4,6-decatrienoate as a kairomone. We also report the unexpected finding that various isomers of methyl 2,4,6-decatrienoate attract Acrosternum hilare (Say), although this bug apparently does not produce methyl decatrienoates. Other stink bugs and tachinids native to North America were also attracted to methyl 2,4,6-decatrienoates. These data indicate there are Heteroptera in North America in addition to Thyanta spp. that probably use methyl 2,4,6-decatrienoates as pheromones. The evidence that some pentatomids exploit the pheromones of other true bugs as kairomones to find food or to congregate as a passive defense against tachinid parasitism is discussed.     

2005～2006年国外塑料工业进展

收集了2005年7月～2006年6月国外塑料工业的相关资料，介绍了2005—2006年国外塑料工业的发展情况。提供了世界塑料产量、消费量及全球各类树脂生产量以及各国塑料制品的进出口情况。作为对比，介绍了中国塑料的生产情况。按通用热塑性树脂（聚乙烯、聚丙烯、聚苯乙烯、聚氯乙烯、ABS树脂）、工程塑料（聚酰胺、聚碳酸酯、聚甲醛、热塑性聚酯、聚苯醚）、通用热固性树脂（酚醛、聚氨酯、不饱和树脂、环氧树脂）、特种工程塑料（聚苯硫醚、液晶聚合物、聚醚醚酮）的品种顺序，对树脂的产量、消费量、供需状况及合成工艺、产品开发、树脂品种的延伸及应用的扩展作了详细的介绍。     

2007～2008年世界塑料工业进展

收集了2007年7月～2008年6月世界塑料工业的相关资料,介绍了2007～2008年国外塑料工业的发展情况,提供了世界塑料产量、消费量及全球各类树脂的需求量及产能情况.按通用热塑性树脂(聚乙烯、聚丙烯、聚苯乙烯、聚氯乙烯、ABS树脂)、工程塑料(尼龙、聚碳酸酯、聚甲醛、热塑性聚酯、聚苯醚)、特种工程塑料(聚苯·硫醚、液晶聚合物、聚醚醚酮)、通用热固性树脂(酚醛、聚氨酯、不饱和聚酯树脂、环氧树脂)不同品种的顺序,对树脂的产量、消费量、供需状况及合成工艺、产品应用开发、树脂品种的延伸及应用的进一步扩展等技术作了详细介绍.     

Inorganic/organic nanocomposite coatings: The next step in coating performance

Inorganic/organic hybrid materials have considerable promise and are beginning to become a major area of research for many coating usages, including abrasion and corrosion resistance. Our primary approach is to prepare the inorganic phase in situ within the film formation process of the organic phase. The inorganic phase is introduced via sol-gel chemistry into a thermosetting organic phase. By this method, the size, periodicity, spatial positioning, and density of the inorganic phase can be controlled. An important aspect of the inorganic/organic hybrid materials is the coupling agent. The initial task of the coupling agent is to provide uniform mixing of the oligomeric organic phase with the sol-gel precursors, which are otherwise immiscible. UV-curable inorganic/organic hybrid systems have the advantages of a rapid cure and the ability to be used on heat sensitive substrates such as molded plastics. Also, it is possible to have better control of the growth of the inorganic phase using UV curing. It is our ultimate goal to completely separate the curing of inorganic and organic phases to gain complete control over the morphology, and hence optimization of “all” the coating properties. Thus far, it has been found that concomitant UV curing of the inorganic and organic phases using titanium sol-gel precursors afforded nanocomposite coatings which completely block the substrate from UV light while maintaining a transparent to visible light. Also, it has been found that the morphology of the inorganic phase is highly dependent on the concentration and reactivity of the coupling agent. Presented at the 82nd Annual Meeting of the Federation of Societies for Coatings Technology, October 27–29, 2004, in Chicago, IL.     

Ethanol and (−)-α-Pinene: Attractant Kairomones for Some Large Wood-Boring Beetles in Southeastern USA

Ethanol and α-pinene were tested as attractants for large wood-boring pine beetles in Alabama, Florida, Georgia, North Carolina, and South Carolina in 2002–2004. Multiple-funnel traps baited with (−)-α-pinene (released at about 2 g/d at 25–28°C) were attractive to the following Cerambycidae: Acanthocinus nodosus, A. obsoletus, Arhopalus rusticus nubilus, Asemum striatum, Monochamus titillator, Prionus pocularis, Xylotrechus integer, and X. sagittatus sagittatus. Buprestis lineata (Buprestidae), Alaus myops (Elateridae), and Hylobius pales and Pachylobius picivorus (Curculionidae) were also attracted to traps baited with (−)-α-pinene. In many locations, ethanol synergized attraction of the cerambycids Acanthocinus nodosus, A. obsoletus, Arhopalus r. nubilus, Monochamus titillator, and Xylotrechus s. sagittatus (but not Asemum striatum, Prionus pocularis, or Xylotrechus integer) to traps baited with (−)-α-pinene. Similarly, attraction of Alaus myops, Hylobius pales, and Pachylobius picivorus (but not Buprestis lineata) to traps baited with (−)-α-pinene was synergized by ethanol. These results provide support for the use of traps baited with ethanol and (−)-α-pinene to detect and monitor common large wood-boring beetles from the southeastern region of the USA at ports-of-entry in other countries, as well as forested areas in the USA.