Shearing interferometer with a Kitty self-pumped phase-conjugate mirror

A shearing interferometer with a Kitty-type self-pumped phase-conjugate mirror is developed. The measurement of the focal length of a lens is demonstrated with a standard deviation of 1.5%. In addition, we measured the microdisplacement in the range of tens of micrometers with an error less than 2% by using the interferometer.     

Optical scanning extrinsic Fabry-Perot interferometer for absolute microdisplacement measurement

We report an optical-scanning, dual-fiber, extrinsic Fabry-Perot interferometer system for absolute measurement of microdisplacement. The system involves two air-gapped Fabry-Perot cavities, formed by fiber end faces, functioning as sensing and reference elements. Taking the scanning wavelength as an interconverter to compare the gap length of the sensing head with the reference-cavity length yields the absolute measurement of the sensing-cavity length. The measurement is independent of the wavelength-scanning accuracy, and the reference-cavity length can be self-calibrated simply by one's changing the sensing-head length by an accurate value.     

大型平行光管像质实时监测的可行性论证

针对目前大型平行光管成像质量监测的现状,本文提出了一种对平行光管进行实时监测的新方法,验证了这种监测方法的可行性.该方法根据光管自准检测原理,采用小平面镜对光管像质进行实时监测,计算了在一个焦深范围内小平面镜转角误差大小.实验结果证明在一个焦深范围内用精度0.02"的自准直仪,可将小平面镜转角误差控制在0.2"以内,对大型平行光管起到了进行实时监测的作用.大型平行光管在空间遥感设备中运用广泛,此检测光管像质的方法在工程上将起到积极的作用.     

Frequency Modulated Continuous Wave System for Optical Fiber Intensity Sensors With Optical Amplification

We report on the use of erbium doped fiber (EDF) amplification to enhance a frequency modulated continuous wave (FMCW) technique for referencing optical intensity sensors located between two Bragg grating structures. The experiment combines the concept of FMCW with the spectrally selective mirror properties of Bragg gratings to interrogate with referencing properties intensity based sensors. The interrogation system without amplification yields a sensor resolution of around 0.078 dB. When the EDF amplifier is introduced into the experimental set up, the sensor sensitivity does not change, but the signal-to-noise ratio is improved, resulting into an enhanced resolution of 0.025 dB. We also obtain a remote sensing operation at a location of 50 km, showing the feasibility of this configuration to be used as a remote sensing application.     

Design of null lenses for testing of elliptical surfaces

Null lenses are designed for testing the oblate elliptical surface that is the third mirror of the off-axis three-mirror anastigmatic camera used for remote sensing. Modifying the conventional autostigmatic and autocollimation types of null lenses yields a mixed-type design that has a small annular flat mirror and high sensitivity. Detailed analyses of the sensitivity of the mixed-type null lens system with changes in each surface parameter are described.     

Accurate remote distance sensing by use of low-coherence interferometry: an industrial application

An apparatus for accurate remote distance sensing based on fiber-optic low-coherence light interferometry has been designed for molten glass level measurement. We demonstrate operation of the meter in an adverse industrial environment with <20-mum resolution (standard deviation) within a 20-mm range with the sensing head placed in an oven at ~800 degrees C. In laboratory conditions we were able to measure with 3-mum resolution, which could be improved to submicrometer level by optimization of a reference arm of the interferometer and detection electronics.     

Split-spectrum intensity-based optical fiber sensors for measurement of microdisplacement, strain, and pressure

A self-referencing technique compensating for fiber losses and source fluctuations in reflective air-gap intensity-based optical fiber sensors is described. A dielectric multilayer short-wave-pass filter is fabricated onto or attached to the output end face of the lead-in-lead-out multimode fiber. The incoming broadband light from a white light or a light-emitting diode is partially reflected at the filter. The transmitted light through the filter projects onto a mirror. The light returning from the reflecting mirror is recoupled into the lead-in-lead-out fiber. These two reflections from the filter and the reflecting mirror are spectrally separated at the detector end. The power ratio of these two reflections is insensitive to source fluctuations and fiber-bending loss. However, because the second optical signal depends on the air-gap separation between the end face of the lead-in-lead-out fiber and the reflecting mirror, the ratio provides the information on the air-gap length. A resolution of 0.13 μm has been obtained over a microdisplacement measurement range of 0-254 μm. The sensor is shown to be insensitive to both fiber-bending losses and variations in source power. Based on this approach, a fiber-strain sensor was fabricated with a multilayer interference filter directly fabricated on the end face of the fiber. A resolution of 13.4 microstrain was obtained over a measurement range of 0-20,000 microstrain with a gauge length of 10 mm. The split-spectrum method is also incorporated into a diaphragm displacement-based pressure sensor with a demonstrated resolution of 450 Pa over a measurement range of 0-0.8 MPa.     

International issues in remote sensing

Starting with the initial aim of reconnaissance technical developments in remote sensing have progressed sufficiently for the large-scale realisation of practical benefits. During the eighties a number of countries will have remote sensing satellite systems in operation. There are however a few technical, legal, political and economic issues that still remain unresolved. The resolution of these issues would facilitate practical applications especially in developing countries. Apart from the purely technical and economic issues such as the ability to compare data from two different satellites, the cost of the data etc one of the major hurdles in the application of this technology is the establishment of an international regime governing the activities of states in remote sensing. This is particularly important in view of the link between surveillance and remote sensing. Even though discussions have been going on for quite some time at the United Nations, the prospects of reaching agreement remain bleak. The main problems precluding agreement are national security, commercial and sovereignty concerns of the developed and developing countries. The key issues relate to the right of countries to conduct remote sensing over other countries, the right of countries collecting remote sensing data (over other countries) to distribute this data freely and the modalities of how the “sensitivity” aspects of remote sensing for surveillance and economic espionage can be reconciled with a legal regime that emphasises international cooperation. A critical analysis of existing international space law seems to indicate that there are two kinds of remote sensing—passive and active. In passive remote sensing the satellite sensor detects the sun-reflected or self-emitted radiation from objects on the ground. In active remote sensing a pulse of electromagnetic radiation is transmited from the satellite and its reflectance or scattering by objects on the earth’s surface is measured. A strict reading of existing legal principles on space seem to imply that passive sensing is legal while active sensing could be interpreted as violating the sovereignty of the sensed state. Agreement on remote sensing can be reached if a resolution or a range of resolutions can be defined to discriminate between “sensitive” and “non-sensitive” data. The only international agreement in this area between the USSR and a group of nine socialist countries uses a resolution limit of 50m. Available information on the subject seems to indicate that the range is from 25–50 m. One other aspect dealt with relates to the use of satellite data for verification of arms control measures, for crisis monitoring and the prospects of setting up an International Satellite Monitoring Agency (ISMA). It appears that the huge expense that this would entail would be justified only if theISMA can monitor the superpowers and the arms race between them.     

A novel experimental set-up for turbidity sensing based on plastic optical fibre

A novel set-up for remote sensing the turbidity of a solution using plastic optical fibres together with a mirror is proposed. The authors have estimated turbidity of a liquid in terms of the nephelometric turbidity unit – NTU, a standard unit that relates the solution appearance with its turbidity for two proposed set-ups. Its performance was also investigated using clay sample measurements over a concentration range of 0–10 g/L. The proposed set-ups are useful for detection of suspended particles in a solution even in small quantities due to its high sensitivity, simplicity and robustness.     

A phase-conjugate Twyman-Green interferometer with increased sensitivity for laser beam collimation

Abstract

A Twyman-Green interferometer having a phase-conjugate mirror in one arm and double mirror in another arm is described to measure divergence and to check the collimation of a laser beam. It uses an internally self-pumped phase conjugation in BaTiO₃ crystal as phase-conjugate mirror. The use of double mirror gives a dual interference field which results in improved sensitivity in collimation testing. The dual-field interferogram is also useful in easily distinguishing between the divergent and convergent nature of the test beam. Measurement results are presented.     

CCD测量微小位移的研究

介绍ＣＣＤ测量微小位移的一种新方法。这种方法测位移不受待测物体表面状况的影响，分辨率和测量范围可调，适宜测量象金属丝的受力伸长及受热膨胀之类的微小位移，比ＣＣＤ测位移的传统方法优越。     

Modeling the optimal parameters for a remote sensing device

We propose a computer model for a device for remote sensing of the underlying surface close to a gas pipeline, allowing us to calculate the ladar parameters so we can select their optimal design values and work up recommendations for remote sensing from on board an aircraft.     

Multiplexing Scheme for Self-Interfering Long-Period Fiber Gratings Using a Low-Coherence Reflectometry

A novel multiplexing scheme based on a low-coherence reflectometry (LCR) is proposed for a sensing array (in parallel) of self-interfering long-period fiber gratings (SI-LPGs). Each SI-LPG sensor consists of an LPG and a section of fiber with a highly reflective end (mirror). The spectral information of each LPG is sensitive to some parameters of the surrounding measurand and can be reconstructed from the corresponding subreflectograms (obtained by the LCR) through a fast Fourier transformation. The sensing signals of multiple SI-LPG sensors can be multiplexed if the length of the fiber section in each sensor is set to a different value. Experiments of measuring the surrounding temperature at different sensors are demonstrated to show the good performance of our multiplexing system.     

A Weighted Threshold Secret Sharing Scheme for Remote Sensing Images Based on Chinese Remainder Theorem

The recent advances in remote sensing and computer techniques give birth to the explosive growth of remote sensing images. The emergence of cloud storage has brought new opportunities for storage and management of massive remote sensing images with its large storage space, cost savings. However, the openness of cloud brings challenges for image data security. In this paper, we propose a weighted image sharing scheme to ensure the security of remote sensing in cloud environment, which takes the weights of participants (i.e., cloud service providers) into consideration. An extended Mignotte sequence is constructed according to the weights of participants, and we can generate image shadow shares based on the hash value which can be obtained from gray value of remote sensing images. Then we store the shadows in every cloud service provider, respectively. At last, we restore the remote sensing image based on the Chinese Remainder Theorem. Experimental results show the proposed scheme can effectively realize the secure storage of remote sensing images in the cloud. The experiment also shows that no matter weight values, each service providers only needs to save one share, which simplifies the management and usage, it also reduces the transmission of secret information, strengthens the security and practicality of this scheme.     

改善PZT微位移器线性的一种方法

根据锆钛酸铅压电陶瓷的逆压电效应。设计了以８０３１单片机为核心的压电陶瓷堆微位移器提高了ＰＺＴ的线性，从而满足了在天文自适应系统中所要求的精确微位的应用。     

Spherical-grating monochromator with a variable-line-spaced grating for synchrotron radiation

An optical design for spherical-grating monochromators for application to synchrotron radiation is presented. High spectral and spatial performance is obtained with a spherical variable-line-spaced grating coupled to a spherical mirror with its tangential plane coincident with the grating's equatorial plane. The monochromator works without an entrance slit in an off-Rowland configuration with a fixed entrance arm and demagnification on the exit slit. The law for groove-space variation of the grating compensates for the main spectral aberrations; spectral focusing in an extended energy range is ensured by a slight change in the exit arm with translations of the order of a few tens of millimeters. The inclusion of a spherical mirror ensures focusing on a plane perpendicular to the plane of spectral dispersion. The ultimate resolution is limited by the slope errors of a single spherical surface. The layout is applied to the design of a high-resolution monochromator for the 1000-250-eV region.     

Multipurpose spectral imager

A small spectral imaging system is presented that images static or moving objects simultaneously as a function of wavelength. The main physical principle is outlined and demonstrated. The instrument is capable of resolving both spectral and spatial information from targets throughout the entire visible region. The spectral domain has a bandpass of 12 A. One can achieve the spatial domain by rotating the system's front mirror with a high-resolution stepper motor. The spatial resolution range from millimeters to several meters depends mainly on the front optics used and whether the target is fixed (static) or movable relative to the instrument. Different applications and examples are explored, including outdoor landscapes, industrial fish-related targets, and ground-level objects observed in the more traditional way from an airborne carrier (remote sensing). Through the examples, we found that the instrument correctly classifies whether a shrimp is peeled and whether it can disclose the spectral and spatial microcharacteristics of targets such as a fish nematode (parasite). In the macroregime, we were able to distinguish a marine vessel from the surrounding sea and sky. A study of the directional spectral albedo from clouds, mountains, snow cover, and vegetation has also been included. With the airborne experiment, the imager successfully classified snow cover, leads, and new and rafted ice, as seen from 10.000 ft (3.048 m).     

太阳能收集和传输的研究

对高精度太阳能抛物面镜收集器和大孔径低损耗PMMA／Ag泄漏型空芯光纤进行了设计与研究，安装在收集器上的光电追踪器保证了入射光线聚焦在抛物面轴上，有利于聚焦光斑有效地传输到空芯光纤内。与传统的太阳能利用装置相比较，本装置不需要进行能量转换，因此效率高，结构简单，可以实现聚焦后太阳能的远距离高效传输。     

Parallel processing for multiplication modulo by means of phase modulation

We apply optical parallel processing to operations for multiplication modulo, which is one of the key components of a factorization algorithm. With this method, optical phase modulation provides the results of modulo operations. We construct a prototype system based on a Michelson interferometer with a photodetector array. Mirrors are set at both object and reference arms to generate interference fringes. A mirror in the object arm is tilted slightly, whereas the reference arm is set perpendicular to the optical axis. The tilt angle is determined by parameters for the target modulo operations. The presented system can achieve massive data processing in parallel with only simple implementation. We present our experimental results to verify the usefulness of our method.     

Information-processing method of ground-based atmospheric remote sensing: the effective instrument function method

A new method for atmospheric remote sensing from the ground is described. The nonlinear deconvolution method and the reference effective instrument function are used to increase the spectral resolution. The nonlinear least-squares method is used to retrieve the atmospheric parameter profile. This method can increase the measurable altitude of remote sensing and improve the precision of atmospheric inversion.