Synthesis and characterization of microcrystalline cellulose‐graft‐poly(methyl methacrylate) copolymers and their application as rubber reinforcements

In this study, redox‐initiated free radical graft copolymerization of microcrystalline cellulose (MCC) and methyl methacrylate (MMA) has been carried out in aqueous media to develop a novel cellulose‐based copolymer. Cerium ammonium nitrate was used as the initiator in the presence of nitric acid. Effects of monomer concentration, initiator concentration, polymerization time, and polymerization temperature on the graft parameters of copolymers were studied. The successful grafting copolymerization between MCC and MMA was validated through attenuated total reflection, wide‐angle X‐ray diffraction, field‐emission scanning electron microscopy, and thermal gravimetric analysis. In comparison to native MCC, the resultant copolymers exhibited enhanced thermal stability and better compatibility with natural rubber, suggesting its potential application as reinforcement material in rubber industry. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42666.     

Biodegradation of starch and acrylic‐grafted starch by Aspergillus niger

The biodegradation of starch and grafted starch by Aspergillus niger was examined. The grafted polymers were poly(methyl methacrylate) (PMMA) and poly(butyl acrylate) (PBA). Thermogravimetric analysis, Fourier transform infrared, and scanning electron microscopy were used to determine the morphology and degradation degree of each material. The temperature of maximum decomposition for starch decreased as enzymatic degradation proceeded, and it was completed on the 8th day of culturing in a liquid medium. Grafted samples with PMMA and PBA achieved degradation of their starch moiety. PBA in starch‐g‐PBA samples hindered the accessibility of the enzymes to the degradable material, and this resulted in a longer degradation time. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 2764–2770, 2003     

Synthesis and characterization of dextrin‐grafted polypropylene

We carried out the graft copolymerization of the water‐soluble natural polymer dextrin onto preirradiated polypropylene (PP) in an aqueous medium using benzoyl peroxide (BPO) as the radical initiator. PP was irradiated by γ rays from a Co⁶⁰ source at a constant dose rate of 3.40 kGy/h to introduce hydroperoxide linkages, which served as the sites for grafting. The graft copolymerization was studied as a function of different reaction parameters, and the maximum percentage grafting (P_g; 55%) of dextrin onto PP was obtained at optimum conditions of [BPO] = 5.165 × 10⁻² mol/L, temperature = 60°C in 120 min with 15 mL of water. Different grafting parameters, such as the percentage apparent grafting, percentage grafting, and percentage true grafting have been evaluated. The graft copolymers were characterized by Fourier transform infrared spectroscopy, thermogravimetric analysis, and scanning electron microscopy. Swelling studies were carried out in pure, binary, ternary, and quaternary solvent systems composed of water, ethanol (EtOH), dimethyl sulfoxide (DMSO), and N,N‐dimethylformamide (DMF) at different ratios. The maximum swelling percentage PP‐g‐dextrin (both composite and true graft) was observed in pure DMSO and DMF followed by EtOH and water. Water‐retention studies of PP and PP‐g‐dextrin (both composite and true graft) were investigated at different time periods, temperatures, and pH values. The maximum percentage water retention of PP‐g‐dextrin (composite, 124%) was observed at 8 h and 50°C in a neutral medium (pH 7). © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Swelling and thermal behaviors of a starch‐based superabsorbent hydrogel with quaternary ammonium and carboxyl groups

A starch‐based superabsorbent hydrogel with quaternary ammonium and carboxyl groups is synthesized in aqueous solution. Various factors, including the initiator dose, the crosslinker dose, and the dose and the concentration of the acrylate monomer, as well as the polymerization temperature, are investigated in terms of the swelling in distilled water and in a 0.9% NaCl solution. Furthermore, the thermal degradation of the modified starch graft copolymer is studied under an air atmosphere. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 2392–2398, 2005     

Thermal behavior of some homogeneously polymethyl methacrylate (PMMA)‐grafted high α‐cellulose products

The graft copolymerization of methyl methacrylate (MMA) onto high α‐cellulose was carried out homogeneously in an N,N‐dimethyl acetamide/lithium chloride solvent system by using benzoyl peroxide as radical initiator. The rate of grafting was evaluated as a function of concentrations of initiator and monomer, reaction time, and temperature. The grafted products were characterized with the help of infrared spectroscopy, whereas the thermal decomposition of optimum PMMA‐grafted high α‐cellulose was studied using TGA, DTG, and DTA techniques at two heating rates, 10 and 20°C/min, in nitrogen atmosphere in the range of room temperature to 650°C. Three major decomposition steps were identified and the relative thermal stabilities of the PMMA‐grafted high α‐cellulose products were assessed. The kinetic parameters for the three decomposition steps were estimated with the help of two well‐known methods. The thermal stability of the grafted products decreased with the increase of graft yield (GY). Crystallinity or peak intensity of wide‐angle X‐ray diffraction patterns decreased with the increase of GY. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 3471–3478, 2004     

Synthesis,characterization, and thermal degradation kinetics of the copolymer poly(4‐methoxybenzyl methacrylate‐co‐isobornyl methacrylate)

A copolymer of 4‐methoxybenzyl methacrylate and isobornyl methacrylate was synthesized by atom transfer radical polymerization. The structure of poly(4‐methoxybenzyl methacrylate‐co‐isobornyl methacrylate) was confirmed by means of Fourier transform infrared, ¹H‐NMR, and ¹³C‐NMR techniques. The molecular weight distribution values of the copolymer were determined with gel permeation chromatography. The number‐average molecular weight and polydispersity index values of poly(4‐methoxybenzyl methacrylate‐co‐isobornyl methacrylate) were found to be 12,500 and 1.5, respectively. The kinetics of the thermal degradation of the copolymer was investigated with thermogravimetric analysis at different heating rates. The activation energy values obtained with the Kissinger, Flynn–Wall–Ozawa, and Tang methods were determined to be 166.38, 167.54, and 167.47 kJ/mol, respectively. Different integral and differential methods were used, and the results were compared with these values. Doyle approximation was also used for comparing the experimental results to master plots. An analysis of the experimental results suggested that the reaction mechanism was an R₁ deceleration type in the conversion range studied. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis,spectral, thermal,and chelation potentials of polymeric hydrazone based on 2,4‐dihydroxy benzophenone

A chelating polymer, poly(2,4‐dihydroxy benzophenone hydrazone–formaldehyde) [poly(DHBPH–F)], was synthesized by the polycondensation of 2,4‐dihydroxy benzophenone hydrazone with formaldehyde in the presence of oxalic acid as a catalyst. Poly(DHBPH–F) was characterized by Fourier transform infrared and ¹H‐NMR spectral data. The molecular weight of the polymer was determined by gel permeation chromatography. Polychelates were obtained when the dimethylformamide solution of the polymer containing a few drops of ammonia was treated with an aqueous solution of metal ions. Elemental analysis of the polychelates indicated that the metal–ligand ratio was 1 : 2. The IR spectra of the polymer–metal complexes suggested that the metals were coordinated through the oxygen of the phenolic? OH group and the nitrogen of the azomethine group. The electron paramagnetic resonance and magnetic moment data indicated a square planar configuration for Cu(II) chelate and an octahedral structure for Ni(II) chelate. The thermogravimetric analysis, differential scanning calorimetry, and X‐ray diffraction data indicated that the incorporation of the metal ions significantly enhanced the degree of crystallinity. The polymerization initiation, electrical conductivity, and catalytic activity of the polychelates are discussed. Heavy‐metal ions [viz., Cu(II) and Ni(II)] were removed with this formaldehyde resin, and the metal‐ion uptake efficiency at different pH's, the nature and concentration of the electrolyte, and the reusability of the resin were also studied. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis and physicochemical study of polyester polyols of epoxy resin of 2,4,6‐tris(4‐hydroxyphenyl)‐1,3,5‐triazine and their polyurethanes

Polyester polyols of ricinoleic acid (ETPRA), oleic acid, linoleic acid (ETPLA), and rosin (ETPR) and epoxy resin of 2,4,6‐tris(4‐hydroxyphenyl)‐1‐3‐5‐triazine (ETP) and their polyurethanes (PUs) were synthesized and characterized by Fourier transform infrared spectroscopy, NMR, differential scanning calorimetry, and thermogravimetric analysis techniques. The PU films showed the following density order: ETPRPU600 > ETPRAPU600 > ETPLAPU600. ETPLAPU600 showed good tensile strength and volume resistivity values compared to ETPRAPU600 and ETPRPU600. All three PUs showed good electric strength. ETPLAPU600 showed almost double the electric strength of ETPRAPU600 and ETPRPU600. The incorporation of soft‐segment poly(ethylene glycol) 600 into PU chains resulted in the flexibility of the films. The PU films showed a high water absorption tendency in water, acidic, and saline environments, and they degraded in an alkaline environment. The weight gain tendency of the films was due to surface solvolysis and was also probably due to microcrack formation. The polyester polyols and PUs were thermally stable up to about 167–221 and 184–214°C, respectively, and followed multistep degradation reactions with either fractional or integral order (0.43–2.71) degradation kinetics. Thus, the structure of the PUs affected the studied physicochemical properties of the films. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40203.     

Synthesis of a novel curing agent containing organophosphorus and its application in flame‐retarded epoxy resins

A novel amine‐terminated and organophosphorus‐containing compound m‐aminophenylene phenyl phosphine oxide oligomer (APPPOO) was synthesized and used as curing and flame‐retarding agent for epoxy resins. Its chemical structure was characterized by Fourier transform infrared (FTIR) spectroscopy, ¹H nuclear magnetic resonance (¹H NMR), ¹³C nuclear magnetic resonance, and ³¹P nuclear magnetic resonance. The flame‐retardant properties, combusting performances, and thermal degradation behaviors of the cured epoxy resins were investigated by limiting oxygen index (LOI), vertical burning test (UL‐94), cone calorimeter test, and thermogravimetric analysis. The EPO/APPPOO thermosets passed V‐1 rating with the thickness of 3.0 mm and the LOI value reached 34.8%. The thermosets could pass V‐2 rating when the thickness of the samples was 1.6 mm. The cone calorimeter test demonstrated that the parameters of EPO/APPPOO thermosets including heat release rate and total heat release significantly decreased compared with EPO/PDA thermosets. Scanning electron microscopy revealed that the incorporation of APPPOO into epoxy resins obviously accelerated the formation of the compact and stronger char layer to improve flame‐retardant properties of the cured epoxy resins during combustion. The mechanical properties and water resistance of the cured epoxy resins were also measured. After the water‐resistance test, EPO/APPPOO thermosets still remained excellent flame retardant and the water uptake was only 0.4%. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41159.     

Synthesis and characterization of conducting poly(aniline‐co‐diaminodiphenylsulfone) copolymers

Polyaniline, poly(aniline‐co‐4,4′‐diaminodiphenylsulfone), and poly(4,4′‐diaminodiphenylsulfone) were synthesized by ammonium peroxydisulfate oxidation and characterized by a number of techniques, including infrared spectroscopy, ultraviolet–visible absorption spectroscopy, ¹H‐NMR, thermogravimetric analysis, and differential scanning calorimetry. These copolymers had enhanced solubility in common organic solvents in comparison with polyaniline. The conductivities of the HCl‐doped polymers ranged from 1 S cm^?1 for polyaniline to 10^?8 S cm^?1 for poly(4,4′‐diaminodiphenylsulfone). The copolymer compositions showed that block copolymers of 4,4′‐diaminodiphenylsulfone (r₁ > 1) and aniline (r₂ < 1) formed and that the reactivity of 4,4′‐diaminodiphenylsulfone was greater than that of aniline. The results were explained by the effect of the ? SO₂? group present in the polymer structure. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 2337–2347, 2003     

Synthesis of poly[N′‐(2‐cyanoacetyl)acrylohydrazide] and its copolymers with styrene and N‐phenylacrylamide: Characterization,complexation, thermal stability,swelling, and morphology

N′‐(2‐cyanoacetyl)acrylohydrazide (CAH) was obtained with the treatment of 2‐cyanoacetohydrazide with acryloyl chloride in acetonitrile. The obtained acrlyoyl derivative was transferred to the corresponding polymer, poly[N′‐(2‐cyanoacetyl)acrylohydrazide] (PCAH), through treatment with 2,2′‐azobisisobutyronitrile at 75°C. Copolymers with styrene or N‐phenyl acrylamide monomers were synthesized with different ratios. The structures of these polymers were characterized with elemental analysis and spectral data. The morphology, metal uptake, and ion selectivity of the polymers were studied. In addition, the swelling behavior of the polymer and metallopoymer complexes at different times of drying was also investigated. Thermogravimetric analysis of the polymer and polymer complexes under air reflected that PCAH–Pb was the most stable, followed by PCAH, PCAH–Hg, PCAH–Cu, PCAH–Ni, and PCAH–Co. A similar stability with little difference was reported under nitrogen. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Nonionic water‐soluble polymer: Preparation,characterization, and application of poly(1‐vinyl‐2‐pyrrolidone‐co‐hydroxyethylmethacrylate) as a polychelatogen

The free‐radical copolymerization of water‐soluble poly(1‐vinyl‐2‐pyrrolidone‐co‐hydroxyethylmethacrylate) was carried out with a feed monomer ratio of 75:25 mol %, and the total monomer concentration was 2.67M. The synthesis of the copolymer was carried out in dioxane at 70°C with benzoyl peroxide as the initiator. The copolymer composition was obtained with elemental analysis and ¹H‐NMR spectroscopy. The water‐soluble polymer was characterized with elemental analysis, Fourier transform infrared, ¹H‐ and ¹³C‐NMR spectroscopy, and thermal analysis. Additionally, viscosimetric measurements of the copolymer were performed. The thermal behavior of the copolymer and its complexes were investigated with differential scanning calorimetry (DSC) and thermogravimetry techniques under a nitrogen atmosphere. The copolymer showed high thermal stability and a glass transition in the DSC curves. The separation of various metal ions by the water‐soluble poly(1‐vinyl‐2‐pyrrolidone‐co‐hydroxyethylmethacrylate) reagent in the aqueous phase with liquid‐phase polymer‐based retention was investigated. The method was based on the retention of inorganic ions by this polymer in a membrane filtration cell and subsequent separation of low‐molar‐mass species from the polymer/metal‐ion complex formed. Poly(1‐vinyl‐2‐pyrrolidone‐co‐hydroxyethylmethacrylate) could bind metal ions such as Cr(III), Co(II), Zn(II), Ni(II), Cu(II), Cd(II), and Fe(III) in aqueous solutions at pHs 3, 5, and 7. The retention percentage for all the metal ions in the polymer was increased at pH 7, at which the maximum retention capacity could be observed. The interaction of inorganic ions with the hydrophilic polymer was determined as a function of the pH and filtration factor. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 178–185, 2006     

N,N‐diethyl dithiocarbamato group induced photografting of methyl methacrylate onto polyurethane

The N,N‐diethyl dithiocarbamato group present in a variety of compounds acts as an initiator in the photopolymerization processes. The photolability of this group is due to the cleavage of the C S bond by UV irradiation. N,N‐Diethyl dithiocarbamato‐(1,2)‐propane diol with a pendent N,N‐diethyl dithiocarbamato group was prepared from 3‐chloro‐(1,2)‐propane diol and sodium diethyl dithiocarbamate. A polyurethane macrophotoinitiator was then synthesized by a two‐step process, where N,N‐diethyl dithiocarbamato‐(1,2)‐propane diol was used as the chain extender. Other components used included 4,4′‐diphenylmethane diisocyanate and poly(propylene glycol) (molecular weight = 1000). The polyurethane thus synthesized had pendent N,N‐diethyl dithiocarbamato groups. This polyurethane macrophotoinitiator was then used to polymerize methyl methacrylate in a photochemical reactor (Compact‐LP‐MP 88) at 254 nm. The resulting graft copolymer, polyurethane‐g‐poly(methyl methacrylate), was freed from the homopolymer by a standard procedure. The graft copolymer was characterized by Fourier transform infrared spectroscopy, ¹H‐NMR spectroscopy, thermogravimetric analysis, differential scanning calorimetry, solution viscometry, and scanning electron microscopy. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Polyethylene‐supported N‐bromosuccinimide polymeric reagent for use in some oxidation reactions

We report a three‐step preparation of a polymer‐supported oxidizing reagent, polyethylene‐g‐N‐bromosuccinimide (PE‐g‐NBS), through the graft copolymerization of maleic anhydride (MAn) onto polyethylene (PE) by a photochemical method with 1% benzophenone as a photosensitizer. The postgrafting treatment of polyethylene‐g‐maleic anhydride (PE‐g‐MAn) with urea on fusion gives polyethylene‐g‐succinimide (PE‐g‐succinimide), which, on further treatment with an aqueous solution of sodium hydroxide and bromine, gives the required reagent, PE‐g‐NBS. The maximum percentage grafting (25%) was obtained with 3.57 mol of MAn and 0.5 mL of 1% benzophenone in 120 min. Fourier transform infrared spectroscopy and thermogravimetric analysis methods were used to characterize the graft copolymer PE‐g‐MAn, PE‐g‐succinimide, and the polymeric support, that is, PE‐g‐NBS. The grafted PE and the polymeric support were found to be thermally stable. The polymer‐supported N‐bromosuccinimide was used successfully for the efficient oxidation of a series of alcohols, including 2‐propanol, n‐butanol, ethylene glycol, cyclohexanol, poly(vinyl alcohol), benzoin, benzyl alcohol, and chloromycetin, to their corresponding aldehydes and ketones. The selectivity of PE‐g‐NBS toward the oxidation of secondary alcoholic groups without the disturbance of the primary alcoholic groups was reflected during the oxidation of chloromycetin. The oxidized products were characterized by Fourier transform infrared and ¹H‐NMR spectral methods. The reagent was reused for the oxidation of fresh alcohols, and it was found to oxidize them successfully, although with a little lower product yield. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Synthesis and characterization of new polyureas based on 4‐(4′‐aminophenyl)urazole and various diisocyanates

4‐(4′‐Aminophenyl)urazole (AmPU) was prepared from 4‐nitrobenzoic acid in six steps. The reaction of monomer AmPU with n‐isopropylisocyanate was performed in N,N‐dimethylacetamide solutions at different ratios, and the resulting disubstituted and trisubstituted urea derivatives were obtained in high yields and were finally used as models for polymerization reactions. The step‐growth polymerization reactions of AmPU with hexamethylene diisocyanate, isophorone diisocyanate, and toluene‐2,4‐diisocyanate were performed in N‐methylpyrrolidone solutions in the presence of pyridine as a catalyst. The resulting novel polyureas had inherent viscosities of 0.11–0.18 dL/g in dimethylformamide at 25°C. These polyureas were characterized with IR, ¹H‐NMR, elemental analysis, and thermogravimetric analysis. Some physical properties and structural characterization of these novel polyureas are reported. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 2692–2700, 2003     

Synthesis of polypropylene graft copolymers from a hydroxyl‐groups‐containing polypropylene precursor via atom‐transfer radical polymerization

Isotactic polypropylene graft copolymers, isotactic[polypropylene‐graft‐poly(methyl methacrylate)] (i‐PP‐g‐PMMA) and isotactic[polypropylene‐graft‐polystyrene] (i‐PP‐g‐PS), were prepared by atom‐transfer radical polymerization (ATRP) using a 2‐bromopropionic ester macro‐initiator from functional polypropylene‐containing hydroxyl groups. This kind of functionalized propylene can be obtained by copolymerization of propylene and borane monomer using isospecific MgCl₂‐supported TiCl₄ as catalyst. Both the graft density and the molecular weights of i‐PP‐based graft copolymers were controlled by changing the hydroxyl group contents of functionalized polypropylene and the amount of monomer used in the grafting reaction. The effect of i‐PP‐g‐PS graft copolymer on PP‐PS blends and that of i‐PP‐g‐PMMA graft copolymer on PP‐PMMA blends were studied by scanning electron microscopy. Copyright © 2006 Society of Chemical Industry     

Synthesis,characterization and application of novel polyacrylamide‐grafted barley

Polyacrylamide‐grafted barley (BAR‐g‐PAM) was synthesized by ceric ion‐based conventional method. The grafting of polyacrylamide chains on the polysaccharide backbone was confirmed through various physicochemical techniques such as intrinsic viscosity measurement, ¹³C‐NMR spectra, FTIR spectroscopy, elemental analysis, scanning electron microscopy morphology, thermogravimetric analysis study, number‐average molecular weight, and aqueous solubility. Furthermore, flocculation efficacy of the graft copolymers was studied in coal fine suspension through “jar test” procedure, toward its possible application as a novel flocculant for treatment of coal washery effluent. BAR‐g‐PAM is reported as a novel flocculant that can be used for bulk treatment of coal washery effluents. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41046.     

Synthesis and characterization of new polyureas derived from 4‐(4′‐Methoxyphenyl)urazole

4‐(4′‐Methoxyphenyl)urazole (MPU) was prepared from 4‐methoxybenzoic acid in five steps. The reaction of monomer MPU with n‐isopropylisocyanate was performed at room temperature in N,N‐dimethylformamide solution, and the resulting bis‐urea derivative was obtained in high yield and was finally used as a model for polymerization reaction. The step‐growth polymerization reactions of monomer MPU with hexamethylene diioscyanate, isophorone diioscyanate, and toluene‐2,4‐diioscyanate were performed in N,N‐dimethylacetamide solution in the presence of pyridine as a catalyst. The resulting novel polyureas have an inherent viscosity (η_inh) in a range of 0.07–0.21 dL/g in DMF and sulfuric acid at 25°C. These polyureas were characterized by IR, ¹H‐NMR, elemental analysis, and TGA. Some physical properties and structural characterization of these novel polyureas are reported. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 1141–1146, 2002     

Synthesis of phospholipidated β‐cyclodextrin and its application for flame‐retardant poly(lactic acid) with ammonium polyphosphate

In this study, phospholipidated β‐cyclodextrin (PCD) was obtained by the condensation between β‐cyclodextrin and phenyl phosphonic acid dichloride, which was characterized by Fourier transform infrared (FTIR) spectra, ¹H‐NMR, and thermogravimetric analysis (TGA). The thermal stability and flame retardancy of the poly(lactic acid) (PLA) blends [PLA–ammonium polyphosphate (APP)–PCD] were measured by TGA coupled to FTIR spectroscopy, vertical burning test (UL‐94), limiting oxygen index (LOI), and cone calorimetry tests. The results show that the mass ratio and loading amount of APP and PCD affected the properties of PLA. When the loading of APP and PCD was 30 wt % and the mass ratio of APP to PCD was 5:1, the highest LOI value of 42.6% (that of neat PLA was 19.7%) and a UL‐94 V0 rating were achieved, and the reduction of the total heat release was greater than 80%. Even when the total amount of APP and PCD was decreased to 20 wt % with the same mass ratio, the flame‐retardant PLA still can achieved a UL‐94 V0 rating. The improved performance was explained by the formation of an intumescent, continuous, contact char layer. Moreover, the reaction between APP and PCD contributed to the improvement of the thermal stability of the char residue. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46054.