共查询到18条相似文献,搜索用时 281 毫秒
1.
可控旋转式离散杆战斗部工程设计方法探索 总被引:1,自引:0,他引:1
探索性提出了可控旋转式离散杆战斗部结构的一种工程设计方法,给出了有关设计依据和原理试验结构,对该结构类型战斗部设计是一个有益的尝试。 相似文献
2.
3.
4.
刘伯春 《化工自动化及仪表》1988,(2)
本文提出设计可控自回归滑动平均过程(CARMA)的离散时间模型参考自适应控制新方法.该方法提供模型参考自适应控制和极点配置自校正调节器之间的统一处理格式.证明模型参考自适应控制可应用自校正调节器的方法推导.以这种设计方法为基础,本文设计了一类自适应控制器.给出了应用实例和用微机实现的自适应算法. 相似文献
5.
采用可控升降温电炉测定Sn-Bi金属的步冷曲线,得出Sn-Bi金属的相变温度。对样品的质量,冷却风量、测试区温度、样品混合方式进行了研究,结果表明:增大样品的质量,提高测试区温度,搅拌样品能使步冷曲线的折点明显、平台水平。采用样品管盖上带的搅拌杆搅拌120 g的样品在室温下自然降温,样品混合均匀。 相似文献
6.
本实用新型涉及地震勘探领域所用装备,适用于石油地震勘探可控震源设备。防止可控震源在冬季使用过程中,平板底部产生雪疙瘩等堆积物,着重解决了雪疙瘩的存在影响可控震源"相位"、"出力"和"畸变"这三个主要参数,提高了可控震源地震资料采集质量和采集效率,减轻了震源车操作手的劳动强度,避免了对可控震源相关设备的损伤,该可控震源平板防沾罩安装方便、用料经济、应用效果明显,小改进大效益。 相似文献
7.
8.
为解决复合材料制品离散化生产过程中数据冗杂、生产计划变动大、文件流转效率低等实际生产问题,国内大多数制造企业引进了制造执行系统(Manufacturing Executive System, MES)。本文结合哈尔滨玻璃钢研究院有限公司车间生产现状,设计了适用于车间实际生产的MES系统管理架构,详细介绍了MES系统各个功能模块。最后通过产线验证,达到了生产管理数字化、生产过程透明化、计划管理实时可控等良好应用效果。MES系统的建立对哈尔滨玻璃钢研究院有限公司智能化生产管理具有一定指导意义,提升了企业生产管理效率,促进企业生产更加标准化、精益化、智能化。 相似文献
9.
10.
11.
《Journal of the European Ceramic Society》2005,25(8):1341-1350
The laser floating zone technique has been applied to the growth of Al2O3/ZrO2(Y2O3) rods in the eutectic composition to reveal the effect of forced convection induced by rotation on the rod microstructure. A systematic experimental study of this effect has been carried out combining different source rod and/or eutectic rod rotation (0–200 rpm) and travelling speeds (10–1500 mm/h) in an axial thermal gradient close to 6 × 105 C/m. The results indicate that the rotation is useful to achieve a more homogeneous temperature distribution, especially in thick rods but it has a limited effect in the change of the solidification front shape. The forced convection in the floating zone caused by rotation slightly flattens the solidification interface enhancing the homogeneity of the phase distribution across the sample. However, it introduces several new microstructural features like banding and phase coarsening that can deteriorate the mechanical behaviour of the rods. On the other hand, rods above 1.6 mm in diameter cannot be grown without cracks, even with fast eutectic rod rotation. Rotation does not change the pulling rate threshold (50 mm/h) at which the transition from coupled to dendritic and cellular growth morphology takes place. 相似文献
12.
Vascular structure is indispensable for nutrition supply of 3D bioprinted organs. Coaxial extrusion is a routine way to generate vascular structure, however, the tubular size is fixed in this case. This study presented a simple and flexible method to develop perfusable and permeable vascular structure with controllable tubular diameter and wall thickness. A 3D bioprinter was used to extrude a gelatin/sodium alginate rod into the CaCl2 solution. The polymerization occurred from outside to inside of the rod extruded. Then, the rod extruded was pulled out from the CaCl2 solution and ceased polymerization. After washed away the inner uncross-linked part, a tube was obtained. The tubular diameter and wall thickness can be controlled by adjusting polymerization time. Finally, a layer of endothelial cells (HUVECs) was attached on the surface of the inner wall of the extruded tube using a novel sacrificial method. 相似文献
13.
从注塑机肘杆合模机构弹性变形的运行特征进行分析研究,介绍了作者对弹性力学在注塑机肘杆合模机构中研究应用的一些成果。研究了拉杆和肘杆两者之间抗拉刚度的关系,提出了拉杆及肘杆根据拉伸刚度的设计方法及准则 研究了推力座导杆、销轴、模板支架、模板等抗弯挠度的特征及其相互之间的联系,提出了有关零件抗弯挠度的设计方法及准则 研究了有关零件的挠度和强度之间的内在联系,提出了根据挠度要求进行强度设计的准则。 相似文献
14.
从注塑机肘杆合模机构弹性变形的运行特征进行分析研究,介绍了作者对弹性力学在注塑机肘杆合模机构中研究应用的一些成果。研究了拉杆和肘杆两者之间抗拉刚度的关系,提出了拉杆及肘杆根据拉伸刚度的设计方法及准则;研究了推力座导杆、销轴、模板支架、模板等抗弯挠度的特征及其相互之间的联系,提出了有关零件抗弯挠度的设计方法及准则;研究了有关零件的挠度和强度之间的内在联系,提出了根据挠度要求进行强度设计的准则。 相似文献
15.
从注塑机肘杆合模机构弹性变形的运行特征进行分析研究,介绍了作者对弹性力学在注塑机肘杆合模机构中研究应用的一些成果。研究了拉杆和肘杆两者之间抗拉刚度的关系,提出了拉杆及肘杆根据拉伸刚度的设计方法及准则;研究了推力座导杆、销轴、模板支架、模板等抗弯挠度的特征及其相互之间的联系,提出了有关零件抗弯挠度的设计方法及准则;研究了有关零件的挠度和强度之间的内在联系,提出了根据挠度要求进行强度设计的准则。 相似文献
16.
针对大型棒磨机达不到设计产能、漏浆严重、出现乱棒、条筛断裂等问题,结合棒磨机的结构特点及技术特性等,探讨改进措施,实现了棒磨机的稳定、可靠运行。 相似文献
17.
18.
注塑机肘杆合模机构弹性力学性能的探讨(二) 总被引:2,自引:0,他引:2
从注塑机肘杆合模机构弹性变形的运行特征进行分析研究,介绍了作者对弹性力学在注塑机肘杆合模机构中研究应用的一些成果。研究了拉杆和肘杆两者之间抗拉刚度的关系,提出了拉杆及肘杆根据拉伸刚度的设计方法及准则;研究了推力座导杆、销轴、模板支架、模板等抗弯挠度的特征及其相互之间的联系,提出了有关零件抗弯挠度的设计方法及准则;研究了有关零件的挠度和强度之间的内在联系,提出了根据挠度要求进行强度设计的准则。 相似文献