冲模用楔的计算及简化

楔及楔传动机构是冲模中用来改变冲压施力方向，实现横向冲压及送出料动作的主要结构形式。当用楔传动机构进行横向冲压时，楔本身要承受较大的荷载并涉及其强度及稳定性。可以用简化图算法研究楔及楔传动机构的主要结构参数并简述楔－摆杆与楔－拉杆机构的计算。     

楔横轧多楔轧制铁路车轴可行性有限元分析

采用DEFORM有限元软件，建立楔横轧多楔轧制铁路RD2车轴有限元模型，进行多楔轧制过程有限元仿真，通过分析三楔同时楔入成形RD2轴的金属流动规律、轧件内部应力状态情况等，进一步阐明楔横轧多楔轧制铁路车轴的可行性。有限元分析结果为实现铁路车轴高效化、节能化、专业化生产提供了理论依据。     

一种楔键现场磨削装置的应用

目前，国内游梁式抽油机减速器的输出轴与曲柄大多采用楔键连接，在实际装配时，需要现场磨削楔键。为此文中结合实际生产情况，给出了一种楔键现场磨削装置，有效解决了楔键磨削时间长、效率低的问题。     

大直径圆筒楔环联接结构的研究与设计

以试验为基础，确定大直径圆筒楔环联接结构中楔环的受力状况，并以此为依据，设计出利用中小工厂的现有邓可加工的楔环联接结构，使它的广泛推广为可能。     

楔腔滚轧实践及其机理分析

本文通过对矿车齿钉的轧制，对比了其楔腔滚轧与辊锻、斜轧、横轧的区别，从而展示出楔腔滚轧的优点。同时分析了楔腔滚轧机理及轧制工艺中两个主要参数：加热温度与滚轧楔角。指出了温度选择范围及实践效果。通过受力的分析导出楔角的取值原则。     

使用方便的锥柄用可调锁紧楔

使用方便的锥柄用可调锁紧楔我厂在英国戴维斯（Ｄａｖｉｓ）可调锁紧楔的基础上，设计出适合我国工具锥柄使用的新型可调锁紧楔。这种锁紧楔的适用范围很大，调整范围在１～１０ｍｍ，使用方便，不用锤击。因此，有利于维护镗床主轴和工具锥柄的精度。现将其介绍如下：锁...     

楔横轧技术的应用及发展

介绍了楔横轧工艺的类型、应用、工艺参数及模具结构．当前楔横轧技术在理论和工艺方面的主要研究成果，以及目前楔横轧技术的应用情况和今后的发展方向，以期推动楔横轧技术在我国的发展。     

高速斜撑式超越离合器楔合性能影响因素分析

针对某型高速斜撑式超越离合器在使用过程中存在楔合失败、楔合响应慢等问题，基于ADAMS建立该离合器的动力学仿真模型，分析了斜撑块与内、外圈的摩擦因数、弹簧等效力矩、负载等效质量、阻尼、接触刚度对离合器楔合性能的影响，结果表明：负载、接触刚度对离合器楔合性能影响较大，摩擦因数、弹簧等效力矩、阻尼对离合器楔合性能影响较小。     

可调板式楔横轧机

现有的辊式楔横轧机刚度好，但模具加工复杂且成形精度差，而板式楔横轧机模具加工简单且成形精度好，但刚度差。针对板压滚动塑性精成形机（发明专利95109500．5）存在模板距离调整不方便以及氧化皮难以清除等问题，设计了可调板式楔横轧机，详细介绍了可调板式楔横轧机的结构、检测与控制系统。     

多楔楔横轧轧制力在线测试系统

针对目前多楔轧制规律比较复杂现状，设计了H630轧机轧制力在线测试系统，该系统可以在线准确测出单楔与多楔轧制过程中轧制力变化规律。同时采用Ansys／Ls—Dyna3D有限元软件对轴类零件楔横轧制过程进行模拟，并对轧制力变化规律进行较系统的分析，分析结果与实验测试结果基本一致。     

EXPERIMENTAL RESEARCH AND DESIGN ON HEAT TRANSFER OF EVAPORATOR USED IN THE LARGE QUICK FREEZE PLANT

The evaporator is the main part of a quick-freeze equipment. There are many factors influencing the heat transfer coefficient of an evaporator. The most important factors among them are the fin shape, tube diameter, distance of fin space, frost, and velocity of air flow etc. They mainly influence the thermal efficiency of an evaporator, and therefore its thermal efficiency has direct relationship with the whole efficiency of the quick freeze plant. Evaporators with different structural types have different heat transfer efficiency. In order to obtain high efficiency structure of evaporator, 8 evaporator models with different fin shape, tube diameter and tube arrangement are analyzed and compared. The calculation results show that the integral waved fins, equilateral-triangle arranged small diameter tubes and varying fin-spacing has the highest heat transfer coefficient. The experimental result also shows that the evaporator with this type of structure has better thermal efficiency. The experimental result is in good agreement with the calculation result. It can instruct engineering design for usual designer. A real quick-freeze equipment is designed and put into production. The result shows that, compared with traditional domestic quick-freeze equipments, this equipment decreases by 40% in size and by 20% in energy consumption.     

INTEGRAL EQUATION METHOD＇S APPLICATION IN HOLE-EDGE STRESS OF COMPOSITE MATERIAL PLATE WITH DIFFERENT SHAPED HOLES

The strength of composite plate with different hole-shapes is always one of the most important but complicated issues in the application of the composite material. The holes will lead to mutations and discontinuity to the structure. So the hole-edge stress concentration is always a serious phenomenon. And the phenomenon makes the structure strength decrease very quickly to form dangerous weak points. Most partial damage begins from these weak points. According to the complex variable functions theory, the accurate boundary condition of composite plate with different hole-shapes is founded by conformal mapping method to settle the boundary condition problem of complex hole-shapes. Composite plate with commonly hole-shapes in engineering is studied by several complex variable stress fimction. The boundary integral equations are founded based on exact boundary conditions. Then the exact hole-edge stress analytic solution of composite plate with rectangle holes and wing manholes is resolved. Both of offset axis loadings and its influences on the stress concentration coefficient of the hole-edge are discussed. And comparisons of different loads along various offset axis on the hole-edge stress distribution of orthotropic plate with rectangle hole or wing manhole are made. It can be concluded that hole-edge with continuous variable curvatures might help to decrease the stress concentration coefficient; and smaller angle of outer load and fiber can decrease the stress peak value.     

The use of chemiluminescence in determining the thermal and oxidative stability of motor oils

Chemiluminescence is reviewed as a method of characterising different behaviour of lubricating oils. This includes mineral oils containing additives such as zinc dialkyl-dithiophosphates, sulphonates, succinamides. alkylphenols and polymers. Using a chemiluminescence apparatus and manometric apparatus, various lubricant oil fractions blended with additives were examined. The basic emitters of chemiluminescence are excited carbonyl compounds, and results are presented showing the measurement of chemiluminescence at elevated temperatures.     

GENERATE ROUGH TOOL-PATHS FROM UNORGANIZED POINT-CLOUD DIRECTLY

An approach is presented to generate rough interference-free tool-paths directly from massive unorganized data in rough machining that is performed by machining volumes of material in a slice-by-slice manner. Unorganized point-cloud is firstly converted to cross-section data. Then a robust data-structure named tool-path net is constructed to save tool-path data. Optimal algorithms for partitioning sub-cut-areas and computing interference-free cutter-locations are put forward. Finally the tool-paths are linked in a zigzag milling mode, which can be transformed into a traveling sales man problem. The experiment indicates optimal tool paths can be acquired, and high computation efficiency can be obtained and interference can be avoided successfully.     

PHENOMENON OF CARVED DRIVING WHEELS

A newly found phenomenon of carved driving wheels of a rear-wheel-drive tractor used in an airport is discussed. The circum of every driving wheel is damaged at three regions,which distribute regularly and uniformly. Everyday,the tractor tows a trailer which are times heavier than the tractor,and moves on the same road in the airport. The phenomenon is explained by the torsional self-excited vibration system of the powertrain. The simplified torsional vibration system is discribed by a 2-order ordinary differential equation,which has a limit circle. Experiments and numerical simulations show the followings: Because of the heavy trailer,the slip ratio of the tractor’s driving wheels is very large. Therefore,there is severe torsional self-excited vibration in the tractor’s drivetrain,and the self-excited vibration results in severe and regular fluctuations of the rear wheel’s velocity. The severe fluctuations in velocity fastens the damage of the driving wheels. At the same time,the time interval in which an arbitrary point in the circum of the driving wheel contacts with the road twice is two times more than the period of the torsional self-excited vibration,and this times explained the existence of three damaged regions. At last,it points out that the phenomenon can be avoided when the torsional damping is large enough.     

Stromules and the dynamic nature of plastid morphology

Investigation of plastids via green fluorescent protein (GFP) has led to the rediscovery of tubular extensions of the plastid membrane, termed stromules, for stroma‐filled tubules. These unique structures are challenging our understanding of plastid structure and function. Stromules are highly dynamic, branching and elongating across the plant cell. Recent experiments indicate that cytoplasmic microtubules and microfilaments control the shape and motility of stromules. Whether stromule formation involves plastid‐specific structural systems, such as the plastid division machinery, remains open to debate. Fluorescence photobleaching experiments have revealed that GFP can traffic between plastids joined by stromules. As a result, interest has grown in whether other macromolecules can also travel through these connections. Although the function of stromules is unknown, several aspects of their biology suggest they play a role in molecular exchange between plastids and other organelles.     

A microscope diffusion chamber for the determination of the equilibrium and non-equilibrium osmotic response of individual cells

A microscope diffusion chamber has been developed which allows direct observation of the dynamic osmotic response of individual cells in micro-volume suspensions. Continuous observation of stationary cells is possible including short experimental times while the extracellular chemical composition is changed. Multiple changes of solute type or concentration are easily imposed upon a single sample volume. Response times are a function of chamber configuration but response times as low as 1–10 s are possible with negligible solute concentration gradients within the sample region. The chamber is simple and economical to construct and use. It is the size of an ordinary glass microslide and it can be adapted easily to any common laboratory microscope. All standard optical techniques may be used with the chamber. Construction details and operating characteristics including important limitations are discussed. Example photomicrographs and osmotic data are included.     

VOLUME DEFECT FATIGUE FAILURE OF CERAMIC BALLS UNDER ROLLING CONDITION

A newly developed pure rolling fatigue test rig with three contact points is used to test the rolling contact fatigue properties of silicon nitride ceramic balls. Ball surfaces are examined after failure with optical microscopy and scanning electron microscopy. The failure cause,fatigue phenomenon and mechanics are analyzed. The research shows that subsurface cracks play a dominant role in the formation of spalling failure. These cracks originated from volume defects of the material and propagate,to form elliptical fatigue spalls under the action of principal tensile stresses. The principal tensile stress increases with increasing contact load,causing spall formation and reduction of rolling contact life. The greater the principal tensile stress is,the more severe the peeling of near surface is. Under the same condition,the closer volume defects are to the surface,the more likely failure occurs,the shorter the rolling contact life is.     

气化炉三维扫描测量与数据处理

以德士古气化炉耐火砖的内壁蚀损检测设备为基础,对采集到的点云数据做了进一步处理.通过对数据的筛选和剔除,实现了数据点的平滑降噪细化和精简.然后利用点云对整、网格划分和分色显示等方法,最终完成了内壁腐蚀情况的三维建模.重点讨论了点云数据的预处理及后处理的方法,并根据内壁耐火砖的腐蚀阈值,提出了一种气化炉内壁腐蚀区域的识别与分割方法.对耐火砖的腐蚀分析、气化炉的生产与维修提供了可靠依据,并在工程应用中获得了一致认可.     

Multiple-tapped-delay-line hardware-linearisation technique based on wire load regulation

This article describes designing, implementation and tuning processes of multiple-tapped-delay-line (MTDL). Obtained MTDL can be implemented in various field-programmable-logic-devices (FPGA) devices and applied for time-to-digital-converters (TDC) construction. The task of tuning process is the tapped-delay-line (TDL) linearisation, and consists of two stages. The first stage depends on selecting an appropriate configurable-logic-block (CLB) for particular delay-segment realization and selecting proper connection between these blocks. The second tuning stage, that is essential from this article viewpoint, depends on inter CLBs connecting wires delay regulation realized directly by load regulation. The Load regulation depends on connecting an appropriate number of unused three-state-buffers or CLB inputs to the wire which delay is adjusted. Depending on the number of inputs connected to the wire its capacitance changes that influences its time-constant and finally changes its time-delay.The MTDL mathematical model, obtained characteristics and results of time-interval (TI) measurements are also presented. The derived TDL model provides information about how the particular wire delay should be changed and in which order the changes should be executed. This makes the designing process predictable and easy to carry out. Presented characteristics confirm the proper operation of presented linearisation technique. The proper operation of the whole measuring module is confirmed by obtained TIs histograms presentation.