Dendrimer‐encapsulated Pt nanoparticles/polyaniline nanofibers for glucose detection

A novel amperometric glucose biosensor based on self‐assembling glucose oxidase (GOx) and dendrimer‐encapsulated Pt nanoparticles (Pt‐DENs) on nanofibrous polyaniline (PANI) was described. PANI nanofibers were synthesized via an interfacial polymerization method. A sulfonated polyelectrolytes‐poly(sodium 4‐styrenesulfonate) (PSS) was used to form the negative PANI/sulfonated polyelectrolyte complex, which had good disperse in aqueous solution. GOx was immobilized on the PANI/PSS surface by alternatively assembling a cationic Pt‐DENs layer and an anionic GOx layer. The unique sandwich‐like layer structure (Pt‐DENs/GOx/Pt‐DENs/PANI/PSS) formed by self‐assembling provides a favorable microenvironment to keep the bioactivity of GOx and to prevent enzyme molecule leakage. The fabricated Pt‐DENs/GOx/Pt‐DENs/PANI/PSS electrode exhibited excellent response performance to glucose with a detection limit of 0.5 μM, wide linear range from 10 μM to 4.5 mM, short response time within 5 s, improved sensitivity of 39.63 μA/(mM cm²), and good stability (85% remains after 20 days). © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Poly(2,5‐dimethoxyaniline) films on mild steel for application to glucose biosensor

Poly(2,5‐dimethoxyaniline) (PDMA) films were electrochemically synthesized on mild steel from an aqueous oxalic acid solution using galvanostatic mode. These films were characterized by potential–time curve, UV‐visible absorption spectroscopy, Fourier transform infrared (FTIR) spectroscopy and scanning electron microscopy (SEM). The enzyme glucose oxidase (GOx) was entrapped into the PDMA film by a physical adsorption method. The resulting PDMA–GOx films were characterized by UV‐visible absorption spectroscopy, FTIR, and SEM. The amperometric response of the PDMA–GOx films was measured as a function of glucose concentration in phosphate buffer solution (pH 7.3). The PDMA–GOx films exhibit a fast and linear amperometric response in the range of 2–20 mM glucose. The maximum current density and Michaelis–Menten constant of PDMA/GOx films are found to be ～483 μA/cm² and 1.12 mM, respectively. The shelf stability and thermal stability of these films were also investigated. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

Electrochemical synthesis and optimization of poly(4-methoxyphenol) film as a sensor material

This article describes that electrochemical polymerization of 4-methoxyphenol in the presence of enzyme glucose oxidase produces adherent polymeric films containing the active enzyme onto the surface of platinum electrodes. Polymeric electrodes prepared in this one-step procedure can be operated for the glucose determination. The effects of the electrochemical polymerization parameters (for example, concentrations of monomer, electrolyte, and enzyme; film thickness; and polymerization potential) on the electrode preparation and the effects of amperometric measurement parameters (for example, pH, temperature) on the amperometric responses to the glucose of the prepared electrodes were systematically investigated, and optimal values were determined. Furthermore, glucose specificity and storage stability of the enzyme electrode were investigated. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 68: 1941–1947, 1998     

Direct electrochemistry of catalase at amine-functionalized graphene/gold nanoparticles composite film for hydrogen peroxide sensor

Direct electrochemistry and electrocatalysis of catalase (Cat) was studied based on a nano-composite film consisting of amine functionalized graphene and gold nanoparticles (AuNPs) modified glassy carbon electrode. Graphene was synthesized chemically by Hummers and Offeman method and then was functionalized with amino groups via chemical modification of carboxyl groups introduced on the graphene surface. The nano-composite film showed an obvious promotion of the direct electron transfer between Cat and the underlying electrode, which attributed to the synergistic effect of graphene-NH₂ and AuNPs. The resultant bioelectrode retained its biocatalytic activity and offered fast and sensitive H₂O₂ quantification. Under the optimized experimental conditions, hydrogen peroxide was detected in the concentration range from 0.3 to 600 μM with a detection limit of 50 nM at S/N = 3. The biosensor exhibited some advantages, such as short time respond (2 s), high sensitivity (13.4 μA/mM) and good reproducibility (RSD = 5.8%).     

Nonenzymatic glucose sensor based on flower-shaped Au@Pd core-shell nanoparticles-ionic liquids composite film modified glassy carbon electrodes

A novel nonenzymatic glucose sensor based on flower-shaped (FS) Au@Pd core-shell nanoparticles-ionic liquids (ILs i.e., trihexyltetradecylphosphonium bis(trifluoromethylsulfonyl) imide, [P(C₆)₃C₁₄][Tf₂N]) composite film modified glassy carbon electrodes (GCE) was reported. The Au@Pd nanocatalysts were prepared by seed-mediated growth method, forming the three-dimensional FS nanoparticles, where tens of small Pd nanoparticles (∼3 nm) aggregated on gold seeds (∼20 nm). The FS Au@Pd nanoparticle was a good candidate for the catalytic efficiency of nanometallic surfaces because of its flower-shaped nature, which has greater adsorption capacity. XPS analysis and zeta potential indicated that the surface of Pd atoms is positively charged, profiting the oxidation process of glucose. And ILs acted as bridge connecting Au@Pd one another and bucky gel as platform within the whole nanocomposite. So the modified electrode has higher sensitivity and selectivity owing to intrinsic synergistic effects of this nanocomposite. Amperometric measurements allow observation of the electrochemical oxidation of glucose at 0.0 V (vs. Ag/AgCl), the glucose oxidation current is linear to its concentration in the range of 5 nM-0.5 μM, and the detection limit was found to be 1.0 nM (S/N = 3). The as-prepared nonenzyme glucose sensor exhibited excellent stability, repeatability, and selectivity.     

Amperometric biosensor for nitrite and hydrogen peroxide based on hemoglobin immobilized on gold nanoparticles/polythionine/platinum nanoparticles modified glassy carbon electrode

BACKGROUND: This paper describes a convenient and effective strategy to construct a highly sensitive amperometric biosensor for nitrite (NO₂^?) and hydrogen peroxide (H₂O₂). First, Pt nanoparticles (PtNPs) were electrodeposited on a glassy carbon electrode (GCE) surface, which promoted electron transfer and enhanced the loading of poly‐thionine (PTH). Subsequently, thionine (TH) was electropolymerized on the PtNPs/GCE, and gold nanoparticles (AuNPs) were assembled onto the PTH film to improve the absorption capacity of hemoglobin (Hb) and further facilitate electron transfer. Finally, Hb was immobilized onto the electrode through the AuNPs. RESULTS: Cyclic voltammetry (CV) and scanning electron microscopy (SEM) were used to characterize the fabrication process of the sensing surface. Under optimum conditions, the biosensors can be used for the determination of NO₂^? in the concentration range 70 nmol L^?1 to 1.2 mmo L^?1 and of H₂O₂ in the range 4.9 µmol L^?1 to 6.8 mmol L^?1. The detection limits (S/N = 3) were 20 nmol L^?1 and 1.4 µmol L^?1, respectively. CONCLUSION: The biosensor exhibits good analytical performance, acceptable stability and good selectivity. Copyright © 2011 Society of Chemical Industry     

Supramolecular domains in mixed peptide self-assembled monolayers on gold nanoparticles

Self-organization in mixed self-assembled monolayers of small molecules provides a route towards nanoparticles with complex molecular structures. Inspired by structural biology, a strategy based on chemical cross-linking is introduced to probe proximity between functional peptides embedded in a mixed self-assembled monolayer at the surface of a nanoparticle. The physical basis of the proximity measurement is a transition from intramolecular to intermolecular cross-linking as the functional peptides get closer. Experimental investigations of a binary peptide self-assembled monolayer show that this transition happens at an extremely low molar ratio of the functional versus matrix peptide. Molecular dynamics simulations of the peptide self-assembled monolayer are used to calculate the volume explored by the reactive groups. Comparison of the experimental results with a probabilistic model demonstrates that the peptides are not randomly distributed at the surface of the nanoparticle, but rather self-organize into supramolecular domains.     

Functional gold nanorod particles on conducting polymer poly(3-octylthiophene) as non-enzymatic glucose sensor

The immobilization of surface-functionalized self-assembled monolayer (SAM) gold nanoparticles onto poly(3-octylthiophene) (POT) was achieved by the cooperation of hydrophobic forces. SAMs were prepared by 11-mercaptoundecanoicacid (MUA), 4-mercaptophenyl boronic acid (MPB), and 1-decanethiol (DT) hydrophobic substrates. Nanoparticles-SAM-POT system was characterized by cyclic voltammetry, SEM, EDAX and contact angle measurements. SAMs (MUA) is closely packed providing effective blocking of the underlying platinum electrode and preventing a ferrocyanide molecule from penetrating. However, potential scanning was applied at SAMs (MUA) modified electrode on which electron penetrating holes or defects were occured. Since SAMs (MPB) is poorly packed according to SAMs (MUA), ferrocyanide molecules could penetrate to SAMs (MPB) modified electrode surface. POT-Au-SAM (MPB) electrode was used for glucose determination as potentiometric non-enzymatic glucose sensor. The analytical performance was evaluated and linear calibration graphs were obtained in the concentration range of 5-30 mM glucose including the level of human blood glucose.     

Immobilization of glucose oxidase and platinum on mesoporous silica nanoparticles for the fabrication of glucose biosensor

In this study, amino group modified mesoporous silica nanoparticles (MSN) were prepared and used to immobilize both platinum nanoparticles (PtNP) and glucose oxidase (GOx). The prepared MSN–PtNP demonstrated high stability and reactivity for catalyzing H₂O₂ electro-reduction, mainly due to the large amount of PtNP immobilized, the high surface area of these catalysts and the unique nanostructures formed through the synthetic route. Working at −0.2 V, the linear range in response to H₂O₂ by the prepared MSN–PtNP can be 5 × 10⁻⁷ to 6 × 10⁻² mol L⁻¹. After immobilizing GOx onto MSN–PtNP, the resulting MSN–PtNP–GOx was capable of interference-free determination of glucose with the linear range as wide as 1 × 10⁻⁶ to 2.6 × 10⁻² mol L⁻¹. Furthermore, the fabricated glucose biosensor can offer significant advantages compared with its conventional counterparts, typically like the high sensitivity, good reproducibility and stability, and rapid response ability as well. The fabricated glucose biosensor demonstrated its potential in clinical applications, so as to enable the determination of glucose in real serum samples.     

Encapsulation of docetaxel into PEGylated gold nanoparticles for vectorization to cancer cells

Encapsulation of docetaxel and its solubilization in water was carried out in PEGylated gold nanoparticles (AuNPs) as shown by ¹H NMR (600 MHz ) and UV/Vis spectroscopy and dynamic light scattering. Vectorization of PEGylated AuNP‐encapsulated docetaxel was probed in vitro toward human colon carcinoma (HCT15) and human breast cancer (MCF7) cells. AuNPs alone presented no cytotoxicity toward either MCF7 or HCT15 adenocarcinoma cells. AuNP–docetaxel was found to be 2.5‐fold more efficient than docetaxel alone against MCF7 cells, and the IC₅₀ value of AuNP–docetaxel against HCT15 cells was lower than that of free docetaxel; the increased efficiency brought about by AuNP drug encapsulation was ～1.5‐fold.     

Covalent immobilization of glucose oxidase to poly(O‐amino benzoic acid) for application to glucose biosensor

A biosensor for glucose utilizing glucose oxidase (GOX) covalently coupled to poly(o‐amino benzoic acid) (PAB; a carboxy‐group‐functionalized polyaniline) is described. Amperometric response measurements conducted via unmediated and mediated (with ferrocene carboxylic acid and tetrathiafulvalene) reoxidation of GOX show that glucose can be detected over a wide range of concentrations. An enzyme‐conducting polymer‐mediator model provides for better charge transport in a biosensor. The optimal response, obtained at pH 5.5 and 300 K, lies in the 1–40 mM range. A kinetic plot yields the value of the apparent Michaelis–Menten constant, K_m^app. The operational stability of the PAB‐based glucose biosensor was experimentally determined to be about 6 days. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 78: 662–667, 2000     

Electrochemical tolazoline sensor based on gold nanoparticles and imprinted poly-o-aminothiophenol film

Amperometric detection of tolazoline (TL) was carried out on a gold nanoparticles (AuNPs)/poly-o-aminothiophenol (PoAT)-modified electrode by a molecular imprinting technique and electropolymerization method. The modification procedure was characterized via electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). The recognition between the imprinted sensor and target molecule was observed by measuring the variation of amperometric response of the oxidation-reduction probe, K₃Fe(CN)₆ on electrode. Under the optimal experimental conditions, the peak currents were proportional to the concentrations of tolazoline in two ranges of 0.05-5.0 μg mL⁻¹ and 5.0-240 μg mL⁻¹ with the detection limit of 0.016 μg mL⁻¹. Meanwhile the prepared sensor showed sensitive and selective binding sites for tolazoline. The enhancement of sensitivity was attributed to the presence of AuNPs which decreased the electron-transfer impedance.     

Fabrication of conducting polymer-gold nanoparticles film on electrodes using monolayer protected gold nanoparticles and its electrocatalytic application

We wish to report a simple and new strategy for the fabrication of gold nanoparticles-conducting polymer film on glassy carbon (GC) and indium tin oxide (ITO) surfaces using 5-amino-2-mercapto-1,3,4-thiadiazole capped gold nanoparticles (AMT-AuNPs) in 0.01 M H₂SO₄ by electropolymerization. The presence of amine groups on the surface of the AuNPs was responsible for the deposition of the AMT-AuNPs film on the electrode surface. The atomic force microscopy (AFM) studies reveal that the fabricated p-AMT-AuNPs film showed homogeneously distributed AuNPs with a spherical shape of ∼8 nm diameter. The XPS spectrum shows the binding energies at 83.8 and 87.5 eV in the Au 4f region corresponding to 4f_7/2 and 4f_5/2, respectively. The position and difference between these two peaks (3.7 eV) exactly match the value reported for Au⁰. The N1s XPS showed three binding energies at 396.7, 399.6 and 403.3 eV, corresponding to the NH, –NH– and –N⁺H–, respectively, confirming that the electropolymerization proceeded through the oxidation of –NH₂ groups present on the periphery of the AMT-AuNPs. The application of the present p-AMT-AuNPs modified electrode was demonstrated by studying the electro reduction of oxygen at pH 7.2. The p-AMT-AuNPs film enhanced the oxygen reduction current more than three times than that of p-AMT film prepared under identical conditions.     

葡萄糖加氢制山梨醇纳米镍催化剂前驱体的研究

采用不同前驱体,硝酸镍、醋酸镍、氯化镍和草酸镍,十二烷基磺酸钠作为有机改性剂,浸渍法制备一系列纳米镍催化剂,并用XRD和TEM等技术对四组催化剂的物相、比表面积进行了表征。以葡萄糖加氢制山梨醇反应考察催化剂的活性,结果表明,纳米镍催化剂的活性与镍前驱体的性质,以及纳米镍的尺寸有着紧密关系。其中以氯化镍为前驱体制备的催化剂颗粒尺寸小且散度更高,在温度120℃,压力3.5 MPa下葡萄糖转化率可达93.9%,山梨醇的选择性可达90.1%,同时可循环使用3~4次。     

Controlled multilayer films of sulfonate-capped gold nanoparticles/thionine used for construction of a reagentless bienzymatic glucose biosensor

A novel reagentless bienzymatic sensor for the determination of glucose in the low working potentials without interference is proposed. The bienzymatic sensor was fabricated by covalently attachment of periodate-oxidized glucose oxidase (IO₄⁻-GOx) and horseradish peroxidase (HRP) on controlled multilayer films of sulfonate-capped gold nanoparticles/thionine (SCGNPs/TH). Using the layer-by-layer method (LBL), SCGNPs and TH were deposited alternately on the gold electrode through the electrostatic and covalent interactions. SCGNPs could greatly enhance the amount of immobilized TH and ensure the good conductivity of the whole structure. UV-vis absorption spectroscopy and electrochemical methods showed that the resulting multilayer films were tridimensional conductive and porous, and TH incorporated in LBL configuration had well electroactive performance. Such superstructures can thus provide an ideal matrix for the construction of bienzymatic sensor, where TH molecules acted as a mediator for electron transfer. After IO₄⁻-GOx and HRP were covalently attached to the multilayer precursor film, the resulting biosensor exhibited good electrocatalytical response toward glucose and that the electrocatalytical response increased with the number of TH layers. This suggested that the analytical performance such as sensitivity and detection limit of the bienzymatic sensors could be tuned to the desired level by adjusting the number of deposited SCGNPs/TH bilayers. Furthermore, because of the low working potentials, the interference from other electro-oxidizable compounds (such as uric acid, ascorbic acid and acetaminophen) was avoided, which improved the selectivity of the biosensors. The biosensor constructed with six bilayers of SCGNPs/TH showed a good performance of glucose detection with a fast response less than 20 s, acceptable sensitivity of 3.8 μA mM⁻¹ cm⁻² and the detection limit of 3.5 × 10⁻⁵ M.     

Layer‐by‐layer films based on charge transfer interaction of ϕ‐conjugated poly(dithiafulvene) and incorporation of gold nanoparticles into the films

Layer‐by‐layer (LBL) self‐assembled ultrathin films were prepared via consecutively alternating immersion of substrates into solutions of electron donor, poly(dithiafulvene) (PDF), and electron acceptor, poly(hexanyl viologen) (6‐VP). The charge transfer (CT) interaction formed at solid–liquid interfaces between the backbones of the electron acceptor and donor polymers was the driving force of the alternative deposition. The sandwich heterostructure of the LBL film led to electrical anisotropy in the directions parallel and perpendicular to the film surfaces. Incorporation of gold nanoparticles into the LBL films was investigated by reducing gold ions with the PDF layers already deposited on the film surfaces, or depositing PDF‐protected gold colloidal solution as the electron donor layers directly. The influence of the gold nanoparticles on the electrical anisotropy of the LBL films was also illustrated in this research. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 1608–1615, 2007     

Chemical,biological, and antibacterial characterization of silica glass containing silver and gold nanoparticles

The aim of this study has been the preparation of sol‐gel glasses with potential antibacterial properties. Bioactive glasses containing different percentages of silver and gold nanoparticles have been synthesized via the sol‐gel method. The obtained glasses have 0.5, 1, 1.5, and 2 wt% silver as well as a constant amount of gold nanoparticles (AuNP) added as colloidal solution (15 wt%). Fourier Transform Infrared (FTIR) spectroscopy was used to characterize the materials. Scanning electron microscopy (SEM) has been used to investigate the surface of each sample. Moreover, the materials have been characterized in order to verify their antibacterial activities as well as their bioactivity and cytocompatibility as a function of Ag and Au content. SEM/EDX analysis has shown that the samples are bioactive because they are able to stimulate hydroxyapatite nucleation on their surface when soaked in a simulated body fluid (SBF). WST‐8 assay of 3T3 cells, placed in contact with the material extracts, has showed that the glass does not induce cytotoxicity. Staphylococcus epidermidis and Pseudomonas aeruginosa strains have been used for the evaluation of the antibacterial properties of each sample. The experimental data have shown that all synthesized materials have antibacterial activity. However, the two bacterial strains respond differently to the materials. The data show that the presence of AuNP causes a decrease in the antibacterial activity of Ag⁺ ions.