Transport Ic measurement technique with non-soldered contacts for Ag-sheathed high Tc superconductors

A transport current measurement technique suitable for the technological development of hightemperature superconducting tapes has been designed. The main advantage of the technique presented is in the application of non-soldered current and voltage contacts which allows measurement of the same element of superconducting tape at different technological states (roll-sinter or press-sinter step). Voltage-current characteristics can be measured in self field as well as in external magnetic field at 77 K or 4.2 K and at different field orientations. The technique capabilities are demonstrated by presenting I_c data obtained from Bi(2223)/Ag tape.     

Tcenhancement in superconductor-semiconductor arrays

Subsequent to our observation that the Tl- and Bi-based cuprate high-T _c superconductors are built of superconductor-semiconductor arrays (P. C. W. Fung and W. Y. Kwok,J. Superconduct., this issue), we investigate in this paper the possibility ofT _c enhancement arising from the effect of change of phonon spectrum and the effect of size quantization when one or more semiconductor blocks is attached to the basic superconductor in the unit cell.     

Hysteresis in theIc(H) characteristics of high-temperature superconducting ceramics and thin films

The experimental hysteretic behavior of the transport critical current observed in ceramic Y-Ba-Cu-O and (Bi-Pb)-Sr-Ca-Cu-O, as well as thin film Y-Ba-Cu-O, are presented. The data are analyzed semiqualitatively. The results show certain similarities among the ceramic samples and the films.     

Investigations of chemical interaction between Bi-based 2212 and (RE)Ba2Cu3O7 high Tc superconducting materials

Composite materials have been synthesized by mixing 90% (or 95%) YBa₂Cu₃O₇ and 10% (or 5%) Bi₂Sr₂Ca₁Cu₂O₈ by weight, and firing at 900°C to promote grain growth by inducing a liquid phase (Bi₂Sr₂Ca₁Cu₂O₈) in the system. The influence of the amount of liquid phase on the X-ray diffraction data and electrical properties is reported. Energy dispersive X-ray (EDX) analyses are also reported. The YBiBa₂O₆ phase is formed during the heat treatment and introduces additional chemical heterogeneities at the grain boundaries. A previously reported 2212-related superconducting phase, Bi₂(Sr,Ba)₂(Ca,Y)Cu₂O_8+y, could also be formed during the synthesis process, and its effect on the electrical resistance versus temperature measurements is discussed. Attempts to substitute RE ions (Dy³⁺, Er³⁺, Ho³⁺) for Y³⁺ in YBiBa₂O₆ have been successful and are reported in an appendix section. X-ray diffraction data are also reported. EDX analyses have been performed specifically for a typical ErBiBa₂O₆ compound and reveal the presence of a new Er₂Ba₄O₇ phase.     

Current controlled high Tc superconducting switch

When a current is applied above the critical current l_c of a superconductor, the material is in its normal state and has a finite resistance. Below l_c the material becomes a superconductor with zero resistance. Switching between these two states can be achieved by modulating a current through the sample. Various high T_c superconducting (HTS) line structures have been made. In the normal state these structures are ordinary resistors with resistances ranging from 10 μ to 100 kμ. The critical currents are in the range 10 μA–100 mA. Switching behaviour has been observed in a simple divider circuit using the HTS lines at 77 K. Applications of the current controlled HTS switch to digital and logic circuits are discussed.     

On the characteristic voltage of high-Tc superconductors

The critical currents and normal resistances of the small bridges from yttrium-based high-T _c superconducting ceramics have been measured. The characteristic voltage of these bridges was found to be approximately 20 V. This effect can be explained if, between the ceramic grains, there are contacts of an order of one crystalline cell in size.The authors are grateful to V. N. Polushkin for his help in this investigation.     

Measurements of the surface resistance of high-Tc superconductors at high RF fields

We report measurements of the r.f. surface resistance of a wide variety of high-T _c superconductors in bulk form and as films on silver substrates. Several apparatuses have been constructed and used for measurements at frequencies from 0.15 to 40 GHz and r.f. surface magnetic fields as high as 640 G. In every case in which the field dependence of the surface resistance was measured, the surface resistance increased monotonically with field amplitude through a transition region characterized by a strong field dependence. It then saturated at high field at a value of a few percent of the normal-state surface resistance just aboveT _c . In the presence of this field dependence, the frequency dependence of the surface resistance changed from quadratic to less than linear.     

Superconducting transition temperatures in the Ru-1232 system, RuSr2(Gd1? x Ln x Ce1.8Sr0.2)Cu2O z (Ln = Sm, Dy, and Ho)

We have investigated effects of the lanthanide element Ln and the composition changes on the superconducting transition temperatureT _c in the Ru-1232 system, RuSr₂(Gd_1−x Ln _x Ce_1.8Sr_0.2)Cu₂O _z (Ln = Sm, Dy, and Ho). At first, in the case of the samples with Ln = Sm among almost the single 1232 phase samples, the values of the superconducting onset temperatureT _co are almost the same forx=0.00−0.15, and each of the lattice parametersa andc is almost constant. While, in each of the cases of the samples with Ln = Dy and Ho, the sample withx=0.05 shows the maximum values for both the superconducting onset temperatureT _co and the zero resistivity temperatureT _cz. Especially for the sample with Ln = Dy, the values ofT _co andT _cz are 18.5 and 6.5 K, respectively. These are higher than those of the mother sample of RuSr₂(GdCe_1.8Sr_0.2)Cu₂O _z . Moreover, from variations ofT _co, lattice parameters ofa andc in the RuSr₂(Gd_1−x Dy _x Ce_1.8Sr_0.2)Cu₂O _z system as a function of Dy contentx, the relationship between the superconducting transition temperature and the lattice parameters in the present system are investigated.     

Magnetic hysteresis of the zero-resistance critical temperature of high-Tc granular superconductors

We have found a notorious hysteretic behavior in the dependence of the zero-resistance critical temperature obtained through resistivity () versus temperature (T) measurements with applied field (H _e ) in High-T _c granular superconductors. This behavior is explained semi-quantitatively based on the analogy between the present observation and a similar hysteresis found in the field dependence of the transport critical current in these materials.     

Effect of Bi/Pb ratio and annealing temperature onTc and formation of high-Tc phase in Bi-Pb-Sr-Ca-Cu-O superconductor

We studied the effect of Bi/Pb ratio and annealing temperature onT _c and formation of the high-T _c ; phase in Bi-Pb-Sr-Ca-Cu-O superconductor by the three-step reaction process. The optimum Bi/Pb ratio is about 1.80.3 and the optimum annealing temperature is about 845–855°C. It is found that a variate high-T _c phase existed at the higher annealing temperature. The zero-resistance temperature of the variate high-T _c phase decreased when the annealing temperature increased, although the phase is isostructural with the 110 K phase.     

Specific heat of the high-Tc oxide superconductors

We review the specific heat measurements on La₂CuO₄, La_2–xM_xCuO₄ (M = Ca, Sr, and Ba), YBa₂Cu₃O₇, and the Bi-Ca-Sr-Cu-O and Tl-Ca-Ba-Cu-O systems. Tables of properties derived from the data are presented. Results on RBa₂Cu₃O₇ (R=rare earth elements other than Y) are summarized, as are results on YBa₂(Cu_3–xM_x)O₇ (M=Zn, Cr, Fe, or Ni). The difficulties of analyzing the specific heat data, and specifically the separation of the contributions associated with magnetic impurities, are discussed. It is tentatively concluded that the data nearT _c are consistent with BCS theory, although they show evidence of fluctuation effects. It is also concluded that the low-temperature zero-field data on a majority of the high-T _c oxide superconductors provide evidence of anintrinsic term that is proportional toT, a result that is inconsistent with a gap in the electronic density of states.     

High-pressure dc sputtering of High-Tc BPSCCO thin films withTc(0) above 100 K

High-T _c Bi(Pb)-Sr-Ca-Cu-O thin films have been made on single-crystal MgO substrates using high-pressure dc sputtering technique. X-ray studies confirm the crystallinity and highly oriented structure withc-axis perpendicular to the substrate. By optimizing the annealing schedule the formation of the high-T _c phase is stabilized. The best film exhibited superconducting transition temperature with zero-resistance temperature,T _c(0), as high as 101 K. Temperature dependence ofJ _c indicates the presence of Josephson-type weak links.     

Preparation of YBa2Cu3O7–x high-Tcceramic superconductors from melt

Fabrication of high-T _c ceramic superconductor in the system Y₂O₃-BaO-CuO by melting a mixture of component oxides has been investigated. The compositions of the resulting specimens and the effects of heat treatment have been investigated. It was determined that molten material was composed of phases including BaCuO₂, CuO, Y₂O₃, and Y₂BaCuO₅. A subsequent heat treatment in air produced a nominal amount of the high-T _c phase, while heat treatment in an O₂ atmosphere resulted in a significantly large percentage of the superconducting phase.     

Theab-plane optical conductivity of high-Tc superconductors

There is anisotropy in theab-plane optical properties of the high-temperature superconductors, both in the normal state and in the superconducting state. In both states, two components appear in the optical conductivity: a free carrier part and a midinfrared component. BelowT _c , the free carriers form the superconducting condensate. In YBa₂Cu₃O_7–, the anisotropy of the penetration depth shows that the chains contribute strongly to this superfluid. In Bi₂Sr₂CaCu₂O₈, where chains are absent, there is stillab plane anisotropy. BelowT _c a finite absorption parallelb remains at frequencies as small as 20 meV. This anisotropy could be due to anisotropy either of the superconducting gap or the midinfrared component.     

Superconductivity in epitaxial Bi2Sr2CuO6/Bi2Sr2CaCu2O8 superlattices: The superconducting behavior of ultrathin cuprate slabs

Utilizing atomic layer-by-layer molecular beam epitaxy (ALL-MBE), we have synthesized a series of high-quality superlattices in which ultrathin slabs (one-half unit cell thick) of the high-T _c superconductor Bi₂Sr₂CaCu₂O₈ alternate with up to five such layers of the low-T _c Bi₂Sr₂Cu₁O₆ phase. In all these superlattices we foundT _c to be essentially equal to that of the high-T _c Bi₂Sr₂CaCu₂O₈ phase itself, which indicates that this cuprate is a 2D superconductor insofar as the interslab coupling plays at best a secondary role. Furthermore, it is demonstrated thatT _c need not be reduced at heterostructure interfaces.     

Microwave absorption in high-Tc superconductors

We have investigated the 9- and 10-GHz microwave properties of bulk samples of strontium and barium substituted La₂CuO₄ and YBa₂Cu₃O₇ and one YBa₂Cu₃O₇ MBE film on SrTiO₃. Anomalous microwave absorption is seen especially for poorly compacted bulk ceramic samples. Transitions were generally broadened nearT _c and the residual losses were high. The real part of the surface impedance could be fit belowT _c to the empirical equation with an added term linear in temperature. The microwave response of the film was masked by paraelectric absorption and acoustic resonances in the substrate.     

Vortex motion in coupled DyBa2Cu3O7/(Y0.6Pr0.4)Ba2Cu3O7 heterostructures

Multilayer structures containing 24 Å thick DyBa₂Cu₃O₇ layers, separated by 96 Å of an (Y_0.6Pr_0.4)Ba₂Cu₃O₇ alloy, are studied to investigate the effect of coupling on vortex dynamics. With the magnetic field perpendicular to theab plane, and as a function of the number of superconducting layers in the structure, we find that the activation energy for flux motion increases, first linearly, and then saturates. This linear increase is taken as evidence that pancake vortices belonging to different DyBa₂Cu₃O₇ layers are stacked and have a coupled motion. Above a characteristic number of superconducting layers,N _c , shear of the vortex structures becomes important and the thermally activated process only displaces a stack ofN _c pancake vortices, meaning that the vortex lattice is turning three dimensional. In these structures we findN _c to be 2 to 3.     

Magnetization curves and Bean''s model in high-Tcsuperconductors

High-T _c superconductors have critical currents that decay sharply with increasing magnetic field. We solve Bean's model forJ _c decaying exponentially withH and obtain qualitative agreement with existing magnetization data. We show thatH _c1 cannot be obtained from the linear part of the magnetization curve; it can only be inferred from a low-field anomaly in the hysteresis curve. Presently quoted values ofH _c1 ,based on the linear part of the magnetization curve, are gross overestimates.     

On the limiting factors of the critical current density in high-Tc superconducting ceramics

The temperature dependence of the critical current density at high temperatures and in weak applied magnetic field for YBa₂Cu₃O_7–y ceramic samples with a pronounced granular character is analyzed. The experimental results can be explained in terms of thermally activated motion of the intergrain Josephson vortices at grain boundaries, which may be an indication that the actual limiting factor for the critical current density in ceramic samples results from a weak pinning force density for the intergrain vortices rather than from the weak-link quenching.     

The Gap-to- Tc Ratio of a van Hove Superconductor

We give an analytical expression for the gap-to-T _c ratio (R) of a superconductor with a van Hove singularity in the density of states. Our calculation yields R in very good agreement with the results obtained numerically by S. Ratanaburi et al. [J. Supercond. 9, 485 (1996)].