Lateral Stiffness of Steel Bridge I-Girders Braced by Metal Deck Forms

The lateral-torsional buckling capacity of steel bridge girders is often increased by incorporating bracing along the girder length. Permanent metal deck forms (PMDF) that are used to support the wet concrete deck during bridge construction are a likely source of stability bracing; however, their bracing performance is greatly limited by flexibility in the connections currently used with the formwork. This paper outlines results from a research study that assessed and improved the bracing potential of metal deck forms used in bridge applications. The research study included shear tests of PMDF panels, and also lateral displacement and buckling tests of twin girder systems braced with PMDF. This paper will provide key results from the shear panel tests and then focus on the lateral displacement tests. Parametric investigations of PMDF bracing behavior were conducted using finite-element analyses and the results from the lateral displacement tests served a critical role in calibrating the finite element models. This paper documents key results from lateral load tests of 17 girder–PMDF systems using a variety of bracing details and PMDF thickness values.     

Experimental Study on Prefabricated Concrete Bridge Girder-to-Girder Intermittent Bolted Connections System

This paper reports on a new bridge deck slab flange-to-flange connection system for precast deck bulb tee (DBT) girders. In prefabricated bridge system made of DBT girders, the concrete deck slab is cast with the prestressed girder in a controlled environment at the fabrication facility and then shipped to the bridge site. This system requires that the individual prefabricated girders be connected through their flanges to make it continuous for live load distribution. The objectives of this study are to develop an intermittent bolted connection for DBT bridge girders and to provide experimental data on the ultimate strength of the connection system. This includes identifying the crack formation and propagation, failure mode, and ultimate load carrying capacity. In this study, three different types of intermittent bolted connection were developed. Four actual-size bridge panels were fabricated and then tested to collapse. The effects of the size and the level of the fixity of the connecting steel plates, as well as the location of the wheel load were examined. The developed joint was considered successful if the experimental wheel load satisfied the requirements specified in North American bridge codes. It was concluded that location of the wheel load at the deck slab joint affected the ultimate load carrying capacity of the connections developed. Failure of the joint was observed to be due to either excessive deformation and yielding of the connecting steel plates or debonding of the embedded studs in concrete.     

Stability Bracing Requirements for Steel Bridge Girders with Skewed Supports

Cross frames and diaphragms are critical elements for the stability of I-shaped steel bridge girders during construction. The AASHTO specifications are relatively vague with regards to the stability design requirements of the braces. Spacing limits that have been used in past AASHTO specifications have been removed from the Load and Resistance Factor Design Specification, which instead requires the bracing to be designed by a rational analysis. Whereas the AASHTO specification does not define what constitutes a rational analysis, stability bracing systems must possess adequate stiffness and strength. The commercially available software packages that are typically used in bridge design generally do not have the capabilities to determine the adequacy of the bracing from a stability perspective. This paper outlines the stability bracing requirements for bridges with normal and skewed supports. The effects of support skew on the stiffness and strength requirements for stability bracing are addressed. Solutions that are available for systems with normal supports were modified to account for the effects of the support skew angle. Two orientations of the intermediate bracing were considered: parallel to the skew angles and perpendicular to the longitudinal girder axis. The solutions are presented and compared with finite-element results. The design solutions have good agreement with the finite-element solutions.     

Effect of Intermediate Diaphragms on Decked Bulb-Tee Bridge System for Accelerated Construction

One of the promising systems for accelerated bridge construction is the use of the decked precast prestressed concrete girders or decked bulb-tee girders for the bridge superstructure. Using the calibrated three-dimensional finite-element models through field tests, a parametric study was conducted to determine the effect of intermediate diaphragms on the deflections and flexural strains of girders at the midspan as well as the live load forces in the longitudinal joint. The following diaphragm details were considered: different diaphragm types (steel and concrete), different diaphragm numbers between two adjacent girders, and different cross-sectional areas for steel diaphragms. Five bridge models with different diaphragm details were developed, and the short span length effect on the bridge behavior was also studied. It was found that as long as one intermediate diaphragm was provided between two adjacent girders at midspan, changing the diaphragm details did not affect the girder deflection, the girder strain, and the live load forces in the longitudinal joint significantly. The effect of diaphragms on the midspan deflection was more prominent in the short span bridge; however, the reduction in the maximum bending moment by the diaphragms was more significant in the long span bridge than in the short span bridge. Specific design recommendation is provided in this paper.     

Effect of Edge Stiffening and Diaphragms on the Reliability of Bridge Girders

Secondary elements such as barriers, sidewalks, and diaphragms may affect the distribution of live load to bridge girders. The objective of this study is to evaluate their effect on girder reliability if these elements are designed to be sufficiently attached to the bridge so as not to detach under traffic live loads. Simple-span, two-lane structures are considered, with composite steel girders supporting a reinforced concrete deck. Several representative structures are selected, with various configurations of barriers, sidewalks, and diaphragms. Bridge analysis is performed using a finite-element procedure. Load and resistance parameters are treated as random variables. Random variables considered are composite girder flexural strength, secondary element stiffness, load magnitude (dead load and truck traffic live load), and live load position. It was found that typical combinations of secondary elements have a varying influence on girder reliability, depending on secondary element stiffness and bridge geometry. Suggestions are presented that can account for secondary elements and that provide a uniform level of reliability to bridge girders.     

Construction and Testing of an Innovative Concrete Bridge Deck Totally Reinforced with Glass FRP Bars: Val-Alain Bridge on Highway 20 East

The Val-Alain Bridge, located in the Municipality of Val-Alain on Highway 20 East, crosses over Henri River in Québec, Canada. The bridge is a slab-on-girder type with a skew angle of 20° over a single span of 49.89?m and a total width of 12.57?m. The bridge has four simply supported steel girders spaced at 3,145?mm. The deck slab is a 225-mm-thick concrete slab, with semi-integral abutments, continuous over the steel girders with an overhang of 1,570?mm on each side. The concrete deck slab and the bridge barriers were reinforced with glass fiber reinforced polymer (GFRP) reinforcing bars utilizing high-performance concrete. The Val-Alain Bridge is the Canada’s first concrete bridge deck totally reinforced with GFRP reinforcing bars. Using such nonmetallic reinforcement in combination with high-performance concrete leads to an expected service life of more than 75?years. The bridge is well instrumented with electrical resistance strain gauges and fiber-optic sensors at critical locations to record internal strain data. Also, the bridge was tested for service performance using calibrated truckloads. Design concepts, construction details, and results of the first series of live load field tests are presented.     

Experimental Behavior of Bridge Beams Retrofitted with Postinstalled Shear Connectors

A number of older bridges were constructed with floor systems consisting of a noncomposite concrete slab over steel girders. A potentially economical means of strengthening these floor systems is to connect the existing concrete slab and steel girders with postinstalled shear connectors to permit the development of composite action. This paper presents the results of an experimental investigation of this concept. Five large-scale noncomposite beams were constructed, and four of these were retrofitted with postinstalled shear connectors and tested under static load. The retrofitted composite beams were designed as partially composite with a 30% shear connection ratio. A noncomposite beam was also tested as a baseline specimen. Test results showed that the strength and stiffness of existing noncomposite bridge girders can be increased significantly. Further, excellent ductility of the strengthened partially composite girders was achieved by placing the postinstalled shear connectors near zero-moment regions to reduce slip demand on the connectors. The test results also showed that current simplified design approaches commonly used for partially composite beams in buildings provide good predictions of the strength and stiffness of partially composite bridge girders strengthened using postinstalled shear connectors.     

Sustained-Load and Fatigue Performance of a Hybrid FRP-Concrete Bridge Deck System

The design and construction of bridge systems with long-term durability and low maintenance requirements is a significant challenge for bridge engineers. One possible solution to this challenge could be through the use of new materials, e.g., fiber-reinforced polymer (FRP) composites, with traditional materials that are arranged as an innovative hybrid structural system where the FRP serves as a load-carrying constituent and a protective cover for the concrete. This paper presents the results of an experimental investigation designed to evaluate the performance of a 3/4 scale hybrid FRP-concrete (HFRPC) bridge deck and composite connection under sustained and repeated (fatigue) loading. In addition, following the sustained-load and fatigue portions of the experimental study, destructive testing was performed to determine the first strength-based limit state of the hybrid deck. Results from the sustained-load and fatigue testing suggest that the HFRPC deck system might be a viable alternative to traditional cast-in-place reinforced concrete decks showing no global creep behavior and no degradation in stiffness or composite action between the deck and steel girders after 2 million cycles of dynamic loading with a peak load of 1.26 times the scaled tandem load (TL). Furthermore, the ultimate strength test showed that the deck failed prior to the global superstructure at a load approximately six times the scaled TL.     

Designing and Testing of Concrete Bridge Decks Reinforced with Glass FRP Bars

In addition to their high strength and light weight, fiber-reinforced polymer (FRP) composite reinforcing bars offer corrosion resistance, making them a promising alternative to traditional steel reinforcing bars in concrete bridge decks. FRP reinforcement has been used in several bridge decks recently constructed in North America. The Morristown Bridge, which is located in Vermont, United States, is a single span steel girder bridge with integral abutments spanning 43.90 m. The deck is a 230 mm thick concrete continuous slab over girders spaced at 2.36 m. The entire concrete deck slab was reinforced with glass FRP (GFRP) bars in two identical layers at the top and the bottom. The bridge is well instrumented at critical locations for internal temperature and strain data collection with fiber-optic sensors. The bridge was tested for service performance using standard truck loads. The construction procedure and field test results under actual service conditions revealed that GFRP rebar provides very good and promising performance.     

Improved Longitudinal Joint Details in Decked Bulb Tees for Accelerated Bridge Construction: Fatigue Evaluation

This companion paper focuses on an investigation of improved continuous longitudinal joint details for decked precast prestressed concrete girder bridge systems. Precast concrete girders with an integral deck, which are cast and prestressed with the girder, provide benefits of rapid construction along with improved structural performance and durability. Despite these advantages, the use of this type of construction has been limited to isolated regions of the United States. One of the issues limiting more widespread use is the perceived problem with durability of longitudinal joints used to connect adjacent girders. Four full-scale slabs connected by No. 16 (#5) headed reinforcement detail using a 152 mm (6 in.) lap length were fabricated and tested. An analytical parametric study was conducted to provide a database of maximum forces in the longitudinal joint. These maximum forces are then used to determine the loading demand necessary in the slab testing due to the service live load. Static and fatigue tests under four-point pure-flexural loading, as well as three-point flexural-shear loading, were conducted. Test results were evaluated based on flexural capacity, curvature behavior, cracking, deflection, and steel strain. Based on these test results, the improved longitudinal joint detail is a viable connection system that transfers the forces between the adjacent decked bulb tee girders.     

Behavior of Transverse Confining Systems for Steel-Free Deck Slabs

Extensive research conducted over the past eight years in Canada has led to a concrete deck slab of girder bridges that can be entirely free of any tensile reinforcement. This slab, known as the steel-free deck slab, derives its strength from its internal arching action, which is harnessed longitudinally by making the slab composite with the girders, and transversely by restraining the relative transverse movement of the top flanges of adjacent girders. Two steel-free deck slabs have already been built, in which the transverse confinement is provided by welding steel straps to the girders. This paper presents test results on two other kinds of transverse confining systems, which are applicable to both steel and concrete girders. It is shown that the steel-free deck slab, in addition to being more durable than slabs with steel reinforcement, can also prove to be more economical.     

Girder Differential Deflection and Distortion-Induced Fatigue in Skewed Steel Bridges

The prevalence of fatigue cracking in steel bridge girders due to out-of-plane web distortion motivates development of procedures to evaluate the effects of distortional fatigue. In a previous study sponsored by the Minnesota Department of Transportation (Mn/DOT) the frequency and magnitude of distortional stresses on a typical skewed, steel bridge with staggered, bent-plate diaphragms were assessed. The results revealed a diaphragm deformation mechanism that causes distortional fatigue in the girder web gap, leading to simple, accurate estimates of fatigue stress if bridge properties and differential vertical deflection between girders are known. In the present study, linear finite element models are used to represent composite steel bridges and identify bridge parameters that influence relative deflection of adjacent girders. Parameters found to have a significant effect on differential deflection include girder spacing, angle of skew, span length, and deck thickness. These results are incorporated in a simple procedure that is intended for use in management schemes for skewed, steel-girder bridges, with staggered, bent-plate diaphragms, susceptible to web gap distortional fatigue.     

Analysis of an Orthotropic Deck Stiffened with a Cement-Based Overlay

Over the past years, with increasing traffic volumes and higher wheel loads, fatigue damage in steel parts of typical orthotropic steel bridge decks has been experienced on heavily trafficked routes. A demand exists to find a durable system to increase the fatigue safety of orthotropic steel bridge decks. A solution might be to enhance the stiffness of the traditional orthotropic bridge deck by using a cement-based overlay. In this paper, an orthotropic steel bridge deck stiffened with a cement-based overlay is analyzed. The analysis is based on nonlinear fracture mechanics, and utilizes the finite-element method. The stiffness of the steel deck reinforced with an overlay depends highly on the composite action. The composite action is closely related to cracking of the overlay and interfacial cracking between the overlay and underlying steel plate (debonding). As an example, a real size structure, the Far? bridges located in Denmark, are analyzed. The steel box girders of the Far? bridges spans 80?m, and have a depth of 3.5?m, and a width of 19.5?m. The focus of the present study is the top part of the steel box girders, which is constructed as an orthotropic deck plate. Numerous factors can influence the cracking behavior of the cement-based overlay system. Both mechanical and environmental loading have to be considered, and effects such as shrinkage, temperature gradients, and traffic loading are taken into account. The performance of four overlay materials are investigated in terms of crack widths. Furthermore, the analysis shows that debonding is initiated for a certain crack width in the overlay. The load level where cracking and debonding is initiated depends on the stress-crack opening relationship of the material.     

Modified Yield Line Theory for Full-Depth Precast Concrete Bridge Deck Overhang Panels

Full-depth precast deck slab cantilevers also referred to as full-depth precast concrete bridge deck overhang panels are becoming increasingly popular in concrete bridge deck construction. To date, no simple theory is able to estimate the overhang capacity of full-depth concrete bridge deck slabs accurately. Observations suggest that interaction between flexure and shear is likely to occur as neither alone provides an accurate estimate of the load-carrying capacity. Therefore, modified yield line theory is presented in this paper, which accounts for the development length of the mild steel reinforcing to reach yield strength. Failure of the full-depth panels is influenced by the presence of the partial-depth transverse panel-to-panel seam. When applying a load on the edge of the seam, the loaded panel fails under flexure while the seam fails in shear. Through the use of the modified yield line theory coupled with a panel-to-panel shear interaction, analytical predictions are accurate within 1–6% of experimental results for critical cases.     

Behavior of Field Splice Details in Precast Concrete-Filled Steel Grid Bridge Deck

Redecking operations executed on urban bridges that experience large traffic volumes frequently require carefully orchestrated construction sequences carried out during times of nonpeak traffic. In such a construction environment, only bridge deck options that exhibit a high degree of modularity in conjunction with ease of installation are considered as viable options for a given redecking operation. As a further requirement, the deck installation must also be expected to perform essentially trouble free, with minimal maintenance, for very long periods of time in extremely harsh environments. The present research investigates the behavior of two new deck splice details for use in bridge applications involving precast concrete-filled steel grid deck panels. The research is primarily experimental in nature and is carried out using full-scale deck panel specimens. However, in an effort to better understand the experimental results, 3D finite-element models of the deck specimens are also constructed and studied. This paper summarizes the results from this experimental and analytical program of study.     

Development of an Efficient Connector System for Fiber Reinforced Polymer Bridge Decks to Steel Girders

This paper discusses the development of an innovative and efficient connector to be used with fiber reinforced polymer (FRP) decks supported by steel girders. A summary is provided detailing various proprietary connectors currently employed by FRP deck manufacturers. The paper then describes the development and experimental testing of a clamped shear stud-type connector. Experimental testing was conducted in two phases. The first phase consisted of individual connector testing. In this phase, several variations of the connector are tested and evaluated for strength, damage development, and overall performance. Results of this phase of testing are used to select a final connection design to be used in the second phase of testing, which consisted of testing a scale model bridge that incorporates several of the proposed connectors. The bridge is subjected to static load tests and the resulting reactions and deflections from these tests are compared with comprehensive finite element models of the system.     

Field Investigation on the First Bridge Deck Slab Reinforced with Glass FRP Bars Constructed in Canada

Recently, there has been a rapid increase in using noncorrosive fiber-reinforced polymers (FRP) reinforcing bars as alternative reinforcement for bridge deck slabs, especially those in harsh environments. A new two-span girder type bridge, Cookshire-Eaton Bridge (located in the municipality of Cookshire, Quebec, Canada), was constructed with a total length of 52.08 m over two equal spans. The deck was a 200-mm-thick concrete slab continuous over four spans of 2.70 m between girders with an overhang of 1.40 m on each side. One full span of the bridge was totally reinforced using glass fiber-reinforced polymer (GFRP) bars, while the other span was reinforced with galvanized steel bars. The bridge deck was well instrumented at critical locations for internal temperature and strain data collection using fiber optic sensors. The bridge was tested for service performance using calibrated truckloads as specified by the Canadian Highway Bridge Design Code. The construction procedure and field test results under actual service conditions revealed that GFRP rebar provides very competitive performance in comparison to steel.     

Experimental Evaluation of Compressive Behavior of Orthotropic Steel Plates for the New San Francisco–Oakland Bay Bridge

Compression tests were conducted on two reduced-scale orthotropic plates to verify the design strength of steel box girders for the new San Francisco–Oakland Bay Bridge. The first specimen was composed of three longitudinal closed ribs and a top deck plate. It failed in global buckling, followed by local buckling in the deck plate and ribs. The second specimen, which was composed of four longitudinal T-shaped ribs and a bottom deck plate, experienced global buckling as well as local buckling in the ribs and the deck plate. The ultimate strength and failure mode of both specimens were evaluated by two bridge design specifications: the 1998 AASHTO load and resistance factor design specification and the 2002 Japanese JRA specification. Findings from code comparisons showed that: (1) Sufficient flexural rigidity of ribs were provided for both specimens; (2) the JRA specification slightly overestimated the ultimate strength of both specimens; and (3) neither specifications predicted the observed buckling sequence in Specimen 2. A general-purpose nonlinear finite element analysis program (ABAQUS) was used to perform correlation study. The analysis showed that the ultimate strength and postbuckling behavior of the specimens could be reliably predicted when both the effects of residual stresses and initial geometric imperfections were considered in the model.     

Northern Red Oak Glued-Laminated Timber Bridge

A 5-year program to monitor the performance of a red oak longitudinal girder, transverse deck glued-laminated (glulam) highway bridge is presented. The bridge design details, including preservative treatment results, are described. The live loading results indicate that the predicted and observed live load beam deflections agree to within 7% when the stiffness of the individual beam laminations is used as a predictor and a 10% increase in beam stiffness due to composite action between the deck panel and logitudinal girders is incorporated into the design. The dimensional stability of the deck panels over 3 years has been monitored and analyzed. Significant reflexive cracking of the asphaltic wearing surface has been observed at the interface between each red oak deck panel. This has been attributed to the gap provided between each panel during construction, to the placement of the waterproof membrane directly over the creosote-treated deck panels, and to improper mating of the deck panels to the beams during installation of the lag bolts. Long-term (3-year) dead load deflection measurements indicate that after approximately 1 year, dead load deflections remain nearly constant for the interior beams. Elevations of the lower surface of the two exterior beams fluctuate considerably and vary seasonally. There is no evidence of delamination of the girders or deck panels after 4 years. However, there is some evidence of delamination of the curbs and the tops of rail posts.