Spontaneous Magnetic Transitions and Corresponding Magnetoelastic Properties of Intermetallic Compounds <Emphasis Type="Italic">R</Emphasis>Mn<Subscript>2</Subscript>Ge<Subscript>2</Subscript> (<Emphasis Type="Italic">R</Emphasis>=Gd,Tb and Dy)

The spontaneous magnetic transitions and corresponding magnetoelastic properties of intermetallic compounds RMn₂Ge₂ (R=Gd, Tb and Dy) were investigated by using the X-ray diffraction method and magnetic measurement. The results showed that the compounds experience two magnetic transitions, namely the second-order paramagnetic to antiferromagnetic transition at temperature T_N (T_N=368, 423 and 443 K for GdMn₂Ge₂, TbMn₂Ge₂ and DyMn₂Ge₂, respectively) and the first-order antiferromagnetic - ferrimagnetic transition at temperature T_t (T_t=96, 80 and 40 K for GdMn₂Ge₂, TbMn₂Ge₂ and DyMn₂Ge₂, respectively) as the temperature decreases. The temperature dependence of the lattice constant a(T) displays a negative magnetoelastic anomaly at the second-order transition point T_N and, at the first-order transition T_t, a increases abruptly for GdMn₂Ge₂ and TbMn₂Ge₂, Δa/a about 10^-3. Nevertheless, the lattice constant c almost does not change at these transition points indicating that such magnetoelastic anomalies are mainly contributed by the Mn-sublattice. The transitions of the magnetoelastic properties are also evidenced on the temperature dependence of magnetic susceptibility χ. The first-order transition behavior at T_t is explained by the Kittel mode of exchange inversion.     

Effect of Cu-Ti-C reaction composition on reinforcing particles size of TiC<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>/Cu composites

TiC _x /Cu composites were fabricated by combustion synthesis and hot press technology. Using XRD, SEM, EDS, FESEM analysis methods, the effects of various carbon sources and different Cu contents on the microstructures of TiC _x /Cu composites and the size of TiC _x particles were investigated. Results showed that TiC _x reinforcing particles size increases with decreasing Cu content in Cu-Ti-C reaction system. With carbon nanotubes (carbon black) serving as carbon source, the generated TiC _x particles size transits from nanometer to submicron when Cu content corresponding to the reaction system is reduced to 60 vol% (70 vol%); while graphite serves as carbon source, there is no clear limiting concentration. C particles with smaller size, larger specific surface area and better distribution result in finer TiC _x particles, which is more beneficial to generating nano-sized TiC _x /Cu composites.     

Enhanced Ferroelectric Polarization in Laser-ablated Bi<Subscript>4</Subscript>Ti<Subscript>3</Subscript>O<Subscript>12</Subscript> Thin Films by Controlling Preferred Orientation

Polycrystalline Bi₄Ti₃O₁₂ thin films with various fractions of a-axis, c-axis and random orientations have been grown on Pt(111)/Ti/SiO₂/Si substrates by laser-ablation under different kinetic growth conditions. The relationship between the structure and ferroelectric property of the films was investigated, so as to explore the possibility of enhancing ferroelectric polarization by controlling the preferred orientation. The structural characterization indicated that the large growth rate and high oxygen background pressure were both favorable for the growth of non-c-axis oriented grains in the Bi₄Ti₃O₁₂ thin films. The films with high fractions of a-axis and random orientations, i e, f (a-sxis) = 28.3% and f (random) = 69.6%, could be obtained at the deposition temperature of 973 K, oxygen partial pressure of 15 Pa and laser fluence of 4.6 J/cm², respectively. It was also noted that the variation of ferroelectric polarization was in accordance with the evolution non-c-axis orientation. A large value of remanent polarization (2Pr = 35.5 μC/cm²) was obtained for the Bi₄Ti₃O₁₂ thin films with significant non-c-axis orientation, even higher than that of rare-earth-doped Bi₄Ti₃O₁₂ films.     

Reaction mechanism and microstructure evolution of reaction sintered <Emphasis Type="Italic">h</Emphasis>-BN

Hexagonal boron nitride ceramic (h-BN) based on the nitridation of B powders was obtained by reaction sintering method. The effects of sintering temperature on the mechanical properties and microstructure of the resultant products were investigated and the reaction mechanism was discussed. Results showed that the reaction between B and N₂ occurred vigorously at temperatures ranging from 1 000 °C to 1 300 °C, which resulted in the generation of t-BN. When the temperature exceeded 1 450 °C, transformation from t-BN to h-BN began to occur. As the sintering temperature increased, the spherical particles of t-BN gradually transformed into fine sheet particles of h-BN. These particles subsequently displayed a compact arrangement to achieve a more uniform microstructure, thereby increasing the strength.     

Effects of H<Subscript>2</Subscript>/CO/CH<Subscript>4</Subscript> syngas composition variation on the NO<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript> and CO emission characteristics in a partially-premixed gas turbine combustor

This paper reports the effects of variations in the fuel composition of H₂/CO/CH₄ syngas on the characteristics of NO _x and CO emissions in a partially-premixed gas turbine combustor. Combustion tests were conducted on a full range of fuel compositions by varying each component gas from 0% to 100% at heat inputs of 40 and 50 kW_th. Flame temperature, combustor liner temperature, ignition delay time, and flame structure were investigated computationally and experimentally to judge whether they are significant indicators of NO _x and CO formation. The characteristics of and reasons for NO _x and CO emissions were investigated by analyzing the emission mechanisms and relationships among fuel property, equivalence ratio, flame temperature, liner temperature, flame shape. The flame structures were investigated using the following flame visualization methods: (1) time-averaged OH* chemiluminescence and its Abel-deconvolution; (2) direct photography; and (3) instantaneous OH-PLIF. The flame structures were greatly changed by the fuel composition and heat input, and they were subjected to key affecting parameters of the temperatures of the flames and the liners. NO _x and CO emissions also largely varied according to fuel composition and heat input, showing neither linearly nor exponentially clear proportional trends toward the syngas compositions because of the singular conditions. For example, only the 100% CO flame at low load emitted lots of CO, whereas complete combustion was observed in other cases. However, the qualitative observations showed that the root causes of NO _x emission behaviors were flame temperature and flame structure, which were directly related to the residence time in the flame. Various sets of practical test results were obtained, and these results could contribute to the optimal selection of the fuel-feeding condition when fuel is changed from natural gas to syngas in order to minimize NO _x and CO emissions with stable combustion.     

Elimination of Voids at Interface of <Emphasis Type="Italic">β</Emphasis>-SiC Films and Si Substrate by Laser CVD

Void-free β-SiC films were deposited on Si(001) substrates by laser chemical vapor deposition using hexamethyldisilane (HMDS) as the precursor. The effect of the time of introducing HMDS, i e, the substrate temperature when HMDS introduced (T_in), on the preferred orientation, surface microstructure and void was investigated. The orientation of the deposited SiC films changed from <001> to random to <111> with increasing T_in. The surface showed a layer-by-layer microstructure with voids above T_in ? 773 K, and then transformed into mosaic structure without voids at T_in= 298 K. The mechanism of the elimination of voids was discussed. At T_in =298 K, Si surface can be covered by an ultrathin SiC film, which inhibits the out-diffusion of Si atoms from substrate and prohibites the formation of the voids.     

Effects of electrode on resistance switching properties of ZnMn<Subscript>2</Subscript>O<Subscript>4</Subscript> films deposited by magnetron sputtering

ZnMn₂O₄ films for resistance random access memory (RRAM) were fabricated with different device structures by magnetron sputtering. The effects of electrode on I-V characteristics, resistance switching behavior, endurance and retention characteristics of ZnMn₂O₄ films were investigated. The ZnMn₂O₄ films, using p-Si and Pt as bottom electrode, exhibit bipolar resistive switching (BRS) behavior dominated by the space-charge-limited conduction (SCLC) mechanism in the high resistance state (HRS) and the filament conduction mechanism in the low resistance state (LRS), but the ZnMn₂O₄ films using n-Si as bottom electrodes exhibit both bipolar and unipolar resistive switching behaviors controlled by the Poole-Frenkel (P-F) conduction mechanism in both HRS and LRS. Ag/ZnMn₂O₄/p-Si device possesses the best endurance and retention characteristics, in which the number of stable repetition switching cycle is over 1000 and the retention time is longer than 10⁶ seconds. However, the highest R _HRS/R _LRS ratio of 10⁴ and the lowest V _ON and V _OFF of 3.0 V have been observed in Ag/ZnMn₂O₄/Pt device. Though the Ag/ZnMn₂O₄/n-Si device also possesses the highest R _HRS/R _LRS ratio of 10⁴, but the highest values of V _ON,V _OFF, R _HRS and R _LRS, as well as the poor endurance and retention characteristics.     

Release of nestorone from biodegradable rods system <Emphasis Type="Italic">in vitro</Emphasis>

To study the controlled effect of poly (lactic acid) (PLA), poly lactic-co-glycolic (PLGA) and ethylenediamine (EDA)-maleic anhydride (MAH) modified PLA (EMPLA) for in vitro release of nestorone, rods were prepared using the solvent evaporation method. Amount of drug release in vitro was determined by UV spectrophotometry. Effects of rods diameter, the molecular weight of PLA, the drug percentage and the hydrophilicity of polymers on the release of biodegradable nestorone rods in vitro were investigated. It is indicated that the controlled effect of the biodegradable rods for the release of nestorone in vitro is good. The amount of drug released every week from rods in different diameter is similar to one another. The amount of drug released every week and the accumulative drug released during 12 week were almost in direct proportion with the drug percentage of the rods. The amount of drug released every week is increased as the decreasing of PLA molecular weight. As the hydrophlicity of polymer is improved, the rate of drug release every week is accelerated. The studies show that the plausibility of controlled release of nestorone from PLA, PLGA and EMPLA rods imply the possibility of their application as a controlled delivery system for nestorone. The results show that the greater the molecular weight of PLA is, the slower its degradation is and the slower the drug released; the greater the percentage of nestorone is, the more quickly the drug release. An increase of the hydrophilicity of the polymers will increase their degradation rate and leads to a fast drug release. Anyhow, these rods systems should be further evaluated in vivo.     

YIG thin film for RF integrated inductor

The yttrium iron garnet(YIG) thin films prepared by the sol-gel method and rapid thermal annealing(RTA) process for integrated inductor are investigated. The X-ray diffraction(XRD) results indicate that the YIG film annealed above 650 ℃ is poly-crystalline with single-phase garnet structure. Moreover, it can be found that the initial permeability μi, saturation magnetization M_S and coercivity H_c of these YIG films increase with increasing RTA temperature. Low temperature annealing after crystallization can further improve the magnetic properties of YIG film. Thereby, a planar integrated inductor in the presence of Si substrate/SiO_2 layer/Y_(2.8)Bi_(0.2)Fe_5O_(12) thin film/Cu spiral coil structure is fabricated successfully by the standard IC processes. Due to the magnetic enhancement originated from YIG film, the inductance L and quality factor Q of the inductor with YIG film are improved in a certain frequency range.     

Density function theory study of electronic,optical and thermodynamic properties of CaN<Subscript>2</Subscript>, SrN<Subscript>2</Subscript> and BaN<Subscript>2</Subscript>

We put forward a first-principles density-functional theory about the impact of pressure on the structural and elastic properties of bulk CaN₂, SrN₂ and BaN₂. The ground state properties of three alkaline earth diazenides were obtained, and these were in good agreement with previous experimental and theoretical data. By using the quasi-harmonic Debye model, the thermodynamic properties including the debye temperature Θ _D, thermal expansion coefficient α, and grüneisen parameter γ are successfully obtained in the temperature range from 0 to 100 K and pressure range from 0 to 100 GPa, respectively. The optical properties including dielectric function ε(?), absorption coefficient α(?), reflectivity coefficient R(?), and refractive index n(?) are also calculated and analyzed.     

Improved Breakdown Strength in (Ba<Subscript>0.6</Subscript>Sr<Subscript>0.4</Subscript>)<Subscript>0.85</Subscript>Bi<Subscript>0.1</Subscript>TiO<Subscript>3</Subscript> Ceramics with Addition of CaZrO<Subscript>3</Subscript> for Energy Storage Application

(Ba_0.6Sr_0.4)_0.85Bi_0.1TiO₃ ceramics doped with x wt%CaZrO₃ (x= 0-10) were synthesized by solid-state reaction method. The effects of CaZrO₃ amount on the dielectric properties and structure of (Ba_0.6Sr_0.4)_0.85Bi_0.1TiO₃ ceramics were investigated. X-ray diffraction results indicated a pure cubic perovskite structure for all samples and that the lattice parameter increased till x=5 and then slightly decreased. A homogenous microstructure was observed with the addition of CaZrO₃. Dielectric measurements revealed a relaxor-like characteristic for all samples and that the diffusivity γ reached the maximum value of 1.78 at x=5. With the addition of CaZrO₃, the dielectric constant dependence on electric field was weakened, insulation resistivity enhanced and dielectric breakdown strength improved obviously and reached 19.9 kV/mm at x=7.5. In virtue of low dielectric loss (tan δ<0.001 5), moderate dielectric constant (ε_r >1 500) and high breakdown strength (E_b >17.5 kV/mm), the CaZrO₃ doped (Ba_0.6Sr_0.4)_0.85Bi_0.1TiO₃ ceramic is a potential candidate material for high power electric applications.     

Preparation and piezoelectric properties of CuO-added (Ag<Subscript>0.75</Subscript>Li<Subscript>0.1</Subscript>Na<Subscript>0.1</Subscript>K<Subscript>0.05</Subscript>)NbO<Subscript>3</Subscript> lead-free ceramics

CuO-doped (Ag_0.75Li_0.1Na_0.1K_0.05)NbO₃ (ALNKN-xCuO, x = 0–2mol%) lead-free piezoelectric ceramics were prepared by the solid-state reaction method in air atmosphere. The effects of CuO addition on the phase structure, microstructure, and piezoelectric properties of the ceramics were investigated. The experimental results show that the ALNKN ceramics without doping CuO possess rhombohedral phase along with K2Nb6O16-type phase and metallic silver phase. For all of the CuO-doped ALNKN ceramics, a pure perovskite structure with the orthorhombic phase was obtained by enclosing the samples in a corundum tube. A homogeneous microstructure with the grain size of about 1 μm was formed for the ceramics with 0.5mol% CuO. The grain size increases with increasing amount of CuO. The temperature dependence of dielectric properties indicates that the ferroelectric phase of the ALNKN-xCuO ceramics becomes less stable with the addition of CuO. The ceramics with x = 1mol% exhibit relatively good electrical properties along with a high Curie temperature. These results will provide a helpful guidance to preparing other AN-based ceramics by solid-state reaction method in air atmosphere.     

Remarkable improvement of ferroelectric properties and leakage current in BiFeO<Subscript>3</Subscript> thin films by nd modification

Ferroelectric and leakage properties are important for ferroelectric applications. Pure and Nd-doped (x=0.05-0.20) BiFeO3 thin films were fabricated by sol-gel method on FTO substrates. The phase structure, surface morphology, leakage current, ferroelectric properties, and optical properties of BiFeO₃^- based thin films were investigated. The substitution of Nd³⁺ ions for the Bi3+ site converts the structure from rhombohedral to coexisting tetragonal and orthorhombic. Nd doping improves the crystallinity of BiFeO₃ thin films. The leakage current of Nd-doped BiFeO₃ decreases by two to three orders of magnitude compared with that of pure BiFeO₃. Among the samples, 15% Nd-doped BiFeO₃ exhibits the strongest ferroelectric polarization of 17.96 μC/cm². Furthermore, the absorption edges of Bi_1-xNd _x FeO₃ thin films show a slight red-shift after Nd doping.     

Crystal growth,structure and properties of bismuth triborate BiB<Subscript>3</Subscript>O<Subscript>6</Subscript> crystal

BiB₃O₆ (BIBO) single crystals with size of 46×23×10 mm³ and weight of 26.0 g have been successfully grown by top-seeded method. Problems encountered in the growth process of this crystal have been discussed in detail, and the methods of growing high-quality large crystals have been put forward. The relationship between their structure and properties is studied. The space group of monoclinic BiB₃O₆ is C2 and the cell parameters are a=7.1203(7) Å, b=4.9948(7) Å, c=6.5077(7) Å, β=105.586(8)″, and V=222.93(5) ų. The density of BIBO is 4.8965 g/cm³. The Mohs’s scale of hardness is 5.5–6. There is no cleavage face in the crystal. The transmittance of BIBO is about 80 percent in the range from visible coherent light to near-infrared light. The ultraviolet cutoff wavelength is at 276 nm. BiB₃O₆ is a biaxial crystal and has two sets of axes, and the relative orientation of (X, Y, Z) with regard to (a, b, c) is: X//b, (Y, c)=47.2°, (Z, a)=31.6°, determined by X-ray analysis combined with polarized microscopy. Second-harmonic-generation (SHG) experiments were carried out for the first time. In type I phase-matching (PM) directions (11.1°, 90°) and (168.9°, 90°), SHG conversion efficiencies of two directions for 1.064 μm light are up to 67.7% and 58%, respectively. We have also obtained the third-harmonic-generation (THG) of 1.064 μm. The comparative experiments between BIBO and KTP were carried out on conversion efficiency, transmittance and hardness. All the above results indicate that BiB₃O₆ is a kind of excellent nonlinear optical (NLO) crystal.     

Effect of Ga<Subscript>2</Subscript>O<Subscript>3</Subscript> on structure and properties of calcium aluminate glasses

The effect of Ga₂O₃ on the structure and properties of calcium aluminate glasses fabricated by vacuum melting process was investigated by Raman spectrum, differential scanning calorimeter (DSC), and infrared spectrum methods. The results show that calcium aluminate glass network only consists of [AlO₄] tetrahedral units. With the gradual addition of Ga₂O₃, the quantity of [GaO₄] tetrahedral units increases. Substitution of Ga₂O₃ for Al₂O₃ results in a decrease in T _g T _x, and T _p, and an increase in the thermal stable index ΔT. Similarly, the absorption band around 3.0 μm obviously reduces and the transparency in 4.0-6.0 μm rapidly increases with increasing Ga₂O₃ content. However, the chemical stability of calcium aluminate glasses decreases if Ga₂O₃ is introduced due to the increasing of [GaO₄] units in the glass network.     

Low temperature synthesis of amorphous La<Subscript>0.7</Subscript>Zn<Subscript>0.3</Subscript>MnO<Subscript>3</Subscript> films grown on p<Superscript>+</Superscript>-Si substrates and its resistive switching properties

Amorphous La_0.7Zn_0.3MnO₃ (LZMO) films were deposited on p⁺-Si substrates by sol-gel method at low temperature of 450 °C. The Ag/LZMO/p⁺-Si device exhibits invertible bipolar resistive switching and the R _HRS/R _LRS was about 10⁴-10⁶ at room temperature which can be kept over 10³ switching cycles. Better endurance characteristics were observed in the Ag/LZMO/p⁺-Si device, the V _Set and the V _Reset almost remained after 10³ endurance switching cycles. According to electrical analyses, the conductor mechanism was in low resistor state (LRS) governed by the filament conductor and in the high state (HRS) dominated by the traps-controlled space-charge-limited current (SCLC) conductor.     

Comparison of the influence factors on<Emphasis Type="Italic">NDVI</Emphasis> for CCD camera and WFI imager on CBERS-02

CCD and WFI are payloads in the visible light and near infrared bands on CBERS satellites and they have not been applied widely, especially WFI. This article mainly probes into the potential of these two sensors’ application in the vegetation monitoring and analyses the influences of radiometric calibration, atmosphere conditions and sun-observing geometry, etc. onNDVI obtained from these two sensors respectively. In addition it analyses the effect of the spectral response difference of red and near infrared spectral bands in CCD and WFI sensors onNDVI. Results indicate that radiometric calibration is the most important factor onNDVI, which cannot be applied to vegetation monitoring without radiometric calibration. Results also demonstrate that near surfaceNDVI is different greatly from that of TOA which change with atmosphere conditions. The study shows thatNDVI is also affected by the non-lambertian character of surface and the change of the atmospheric path with the observing geometry. AndNDVI of WFI is higher than that of CCD. They are very different because of their spectral diffirence, but they have a good linear relevant relationship.     

<Emphasis Type="Italic">In-situ</Emphasis> investigation on the fatigue crack propagation behavior in ferrite-pearlite and dual-phase ferrite-bainite low carbon steels

The purpose of this study was to describe the roles of microstructure types and grain boundary characteristics in fatigue crack propagation behavior in ferrite-pearlite steel and ferrite-bainite steel.The ferrite-bainite dual-phase steel was obtained by intermediate heat treatment conducted on ferrite-pearlite low carbon steel.This paper presents the results from investigation using constant stress-controlled fatigue tests with in-situ scanning electron microscopy(SEM),electron backscattering diffraction(EBSD) and fatigue fractography analysis.Microscopic images arrested by in-situ SEM showed that the second hard bainite phase distributed in the soft ferrite matrix had a significant effect on preventing the cracks opening compared with pearlite,and that the cracks in ferrite-bainite steel were "locked" in the second hard bainite phase while the crack propagation path in ferrite-pearlite steel was more tortuous.Moreover,the fatigue fracture surface analysis and the coincidence site lattice(CSL) obtained by EBSD indicated that low-CSL grain boundaries in ferrite-bainite steel distributed more uniformly,which has a more significant effect on the resistance of crack propagation.It was revealed that ferrite-bainite dual-phase microstructures could inhibit the fatigue crack propagation more effectively than ferrite-pearlite microstructures.     

Morphology study of oriented SmBCO film deposited by MOCVD

c-axis-oriented SmBa_2Cu_3O_7(SmBCO) films have been deposited on(100)- LaA1O_3(LAO)substrate by metal organic chemical vapor deposition(MOCVD) technique.The effects of deposition temperature(T_(dep)) and total pressure(P_(tot)) on the orientation and microstructure of SmBCO films were investigated.The orientation of SmBCO films transformed from α-axis to c-axis with increasing of T_(dep) from 900 to 1 100℃.At T_(dep)=1 050℃,SmBCO films had c-axis orientation and tetragon surface.At P_(tot)~(dep)=400-800 Pa and T_(dep)=1 050 ℃,totally c-axis-oriented SmBCO films were obtained.The R_(dep) of SmBCO films increased firstly and then decreased with increasing P_(tot).The surface of SmBCO films exhibited tetragon morphology at 1 050 ℃ and400 Pa.Maximum thickness of SmBCO film deposited was 1.2μm at P_(tot)= 600 Pa,and the corresponding R_(dep)was 7.2 μm·h~(-1).     

Straight SiO<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript> nanorod Y junctions

Novel straight silicon oxide [SiO _x (1<x<2)] nanorod Y junctions have been synthesized on Si plate by thermal evaporation of mixed powders of silica and carbon nanofibers at 1300°C and condensation on a Si substrate without assistance of any catalyst. The synthesized samples were characterized by means of scanning electron microscopy, transmission electron microscopy, high resolution transmission electron microscopy, and energy dispersive X-ray spectroscopy. The results suggested that the straight nanorod Y junctions are amorphous and consist only of elements Si and O, and these rods with diameters about 50–200 nm have a neat smooth surface. The growth of such silicon oxide nanorods may be a result of the second nucleation on the surface of rods causing a change in the growth direction of silicon oxide nanorods developed. Supported by the Academic Human Resources Development in Institutions of Higher Learning under the Jurisdiction of Beijing, and the Program of Science & Technology Activity for Chinese Homecoming Fellow Abroad and Research Program of Beijing Key Laboratory for Sensor (Grant No. KM200810772009)