Solvothermal synthesis and photocatalytic performance of Bi<Subscript>2</Subscript>S<Subscript>3</Subscript> hierarchical nanostructure

The synthesis of Bi₂S₃ hierarchical nanostructure was reported by a solvothermal reaction using ethylene disulfhydrate as the sulfur source and chelating reagent. The as-synthesized samples were characterized by X-ray diffraction (XRD), Raman, X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM) and photoluminescence (PL). The XRD, Raman, and XPS data confirmed that the as-synthesized sample belongs to orthorhombic phase Bi₂S₃. The SEM observations displayed that Bi₂S₃ hierarchical nanostructure assembled from nanorods. A 410 nm ultraviolet photoluminescence (PL) emission of as-synthesized Bi₂S₃ was observed when the sample was excited with wavelength of 320-330 nm. The Bi₂S₃ hierarchical nanostructure also shows a significant enhancement of photocatalytic capability toward degrading methyl orange (MO) under UV light, the photodegradation of MO reaches 95% within 180 min.     

Hydrothermal synthesis ultralong single-crystal Sb<Subscript>2</Subscript>S<Subscript>3</Subscript> nanowires

This paper describes an ethylene glycol (EG)-assisted approach to the ultralong Sb₂S₃ nanowires, formed by a simple hydrothermal reaction between SbCl₃ and Na₂S in the presence of distilled water. Transmission electron microscopy and scanning electron microscopy studies indicate that these Sb₂S₃ nanowires possess a diameter around 200 nm and length up to 100 μm. High-resolution transmission electron microscopy and selected area electron diffraction studies reveal that each Sb₂S₃ nanowire is a single-crystal along the [001] direction. The possible formation mechanism of the nanowires was discussed. The effects of volume ratio of ethylene glycol/water on the morphology of Sb₂S₃ nanowires were also investigated. Diffuse reflectance spectrum result shows that the final products have an apparent blue shift by quantum size effect.     

Glass formation and optical band gap studies on Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>-B<Subscript>2</Subscript>O<Subscript>3</Subscript>-BaO ternary system

The glass forming region of Bi₂O₃-B₂O₃-BaO ternary system was investigated. A serial of glass samples with high Bi₂O₃ content in Bi₂O₃-B₂O₃-BaO system were prepared by using conventional melting and quenching meld, and the refractive indexes and absorption spectra of samples were measured. It is found that the refractive index of samples as well as the UV absorption increase with the increase of BaO content. According to the Tauc law, optical band gap E _opg which is assumed to be the effective energy band gap E _g is calculated and decreases with the increasing BaO content, and the ratio of E _g/E _opg is 1.3.     

Effect of pH values on photocatalytic properties of Bi<Subscript>2</Subscript>WO<Subscript>6</Subscript> synthesized by hydrothermal method

Highly crystalline orthorhombic Bi₂WO₆ powders were hydrothermally synthesized from aqueous solutions of Na₂WO₄ · 2H₂O and Bi (NO₃)₃ · 5H₂O over a wide range of pH. The effect of pH on morphologies, sizes and properties of the Bi₂WO₆ crystals was investigated. The band gaps of the as-prepared Bi₂WO₆ were determined from the onset of the absorption edge of UV-vis diffuse reflectance spectra. The methyl orange photodegradation was employed as a probe reaction to test the photocatalytic activity of the as-prepared samples under visible light irradiation. The photocatalytic activities of methyl orange degradation under visible light irradiation are strongly dependent on the pH used in the synthesis. The highest efficiency is observed at pH=7. Funded by the PCSIRT, the National Natural Science Foundation of China (Nos. 50532030 and 50625206) and the Zhejiang Provincial Natural Science Foundation of China (No. Z4080021)     

Fabrication and mechanical properties of Al<Subscript>2</Subscript>O<Subscript>3</Subscript>/TiAl composites

Al₂O₃/TiAl composites were successfully fabricated by hot-press-assisted exothermic dispersion method with elemental powder mixtures of Ti, Al TiO₂ and Nb₂O₅, and the microstructure and mechanical properties were investigated. The results indicate the fine Al₂O₃ particles tend to disperse on the grain boundaries. The grain size of TiAl matrix decreases and the hardness increases with increasing Nb₂O₅ content. The bending strength and fracture toughness reach to a maximum when Nb₂O₅ content is 6 wt%, under 642 MPa and 6.69 MPa·m^1/2, respectively. Based on the fractography and the observation of crack propagation path, it is concluded that the strengthening and toughening of such composites at room temperature can be attributed to the refinement of the TiAl matrix, the deflection behavior in the crack propagation and the dispersion of Al₂O₃ particles.     

Molten Salt Synthesis of Ba（ Mgl／3Nb2／3 ）O3 Powder

The single-phrase Ba(Mgl/3Nb2/3)O3(BMN) powder was saccessfully prepared by the KCImolten salt synthesis(MSS) method. The temperature for single-phase BMN powders by MSS was about 400℃ lower than that by the solid-phase method. The average particle size (APS) was about 0.91,u.m at 900℃ and increased with increasing synhesis temperature. Based on the APS, the activation energy for particle growth in theMSS, whose value was 64. 1kJmol^-1.was attained. The sinterability of the powder prepared by MSS method wasbetter than that pretared by solid-phase method.     

Microstructure and mechanical properties of TiB<Subscript>2</Subscript>-Al<Subscript>2</Subscript>O<Subscript>3</Subscript> composites

Effects of Al2O3 and Ni as the additives on the sinterability, microstructure and mechanical properties were systematic studied. The experimental results show that only a relative density about 96.2% of hot-pressing TiB2-30%Al2O3 can be attained due to the plate-like TiB2 particle and its random orientation and excessive Al2O3 grain growth. When sintering temperature is higher than 1 700 ℃, TiB2 grain growth can be found, which obvious improves flexural strength of TiB2 matrix but decreases toughness. It seems that mechanical properties of TiB2-Al2O3 composites are mainly depended on relative density besides grain growth. otherwise, they will be determined by relative density and TiB2 matrix strength together. Anyway, Al2O3 addition can weaken the grain boundary and thus improve the toughness of the materials. A flexural strength of 529 MPa, Vickers hardness of 24.8 GPa and indentation toughness of 4.56 MPa·m1/2 can be achieved inTiB2-30vol% Al2O3.     

Optical waveguide and nonlinear properties of Bi<Subscript>3</Subscript>NdTi<Subscript>3</Subscript>O<Subscript>12</Subscript> thin films

Neodymium-substituted bismuth titanate (Bi₃NdTi₃O₁₂, BNT) thin films were prepared on quartz substrates by a metal-organic solution deposition process. The crystalline structure was evaluated by X-ray diffraction. Waveguide property was investigated by using prism coupling technique and optical transmittance measurement. The optical nonlinearities of the film were measured by the top-hat Z-scan techniques and a large positive nonlinear refractive index, nonlinear refractive coefficient and two-photon absorption coefficient were determined to be 3.84 × 10⁻⁷ esu, 0.7523 cm²/GW and 4.81 × 10⁴ cm/GW, respectively. These results reveal that the BNT film may be a kind of new multifunctional materials.     

Fabrication of homogenous dispersion TiB<Subscript>2</Subscript>-Al<Subscript>2</Subscript>O<Subscript>3</Subscript> composites

In order to get a homogenous mixture and compact of TiB2-Al2O3, hybridization as a surface modification method was used to prepare nano-scale Al2O3 coated TiB2 particles. PE-wax particles were first coated onto TiB2 particles by hybridization, and then the nano-scale Al2O3 particles were coated onto the surface of TiB2 coated by PE-wax particles again. SEM, TEM and EDS were used to characterize the microstructure of as-received core/shell particles and its compacts. The experimental results show that a particle-scale homogenous dispersion of TiB2 and Al2O3 can be formed not only in mixed powder but also in dewaxed compacts. The compacts then were sintered by gas-pressing sintering (GPS). Finial products show improved mechanic properties comparing with reference samples fabricated by normal ways.     

Structural characteristics and photocatalytic activity of ambient pressure dried SiO<Subscript>2</Subscript>/TiO<Subscript>2</Subscript> aerogel composites by one-step solvent exchange/surface modification

An ambient pressure synthesis of SiO₂/TiO₂ binary aerogel was prepared through the low-cost precursors of titanium tetrachloride (TiCl₄) and sodium silicate (Na₂O·nSiO₂). After gelation, solvent exchange and surface modification were performed simultaneously and the modified gel was finally dried under ambient pressure. Microstructural analyses by transmission electron microscope (TEM) indicate that fabricated SiO₂/TiO₂ aerogel composite shows similar sponge-like nanostructure as silica aerogel, and the Brunauer–Emmett–Teller (BET) analysis shows that the specific surface area of the composite reaches 605 m²/g, and the average pore size is 9.7 nm. Such binary aerogel exhibits significant photocatalytic performance in this paper for treating model pollutant of methyl orange (MO), and the decolorizing efficiency of MO is detected as 84.9% after 210 mins exposure to UV light irradiation. Degraded gel suspends in the water so as to separate from solution for reuse, and after 4 times recycling, 70% degradation efficiency can be easily reached when composite catalyzed system is exposed for 210 mins under UV irradiation.     

Preparation of MWNTs/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> composites and their mechanical and electrical properties

Since their discovery by Iijima[1], carbon nanotubes (CNTs) have been the focus in novel materials research. Theoretical and experimental studies show[2-9] that CNTs have extraordinary mechanical and electrical properties. Krishnan et al.[2] have reported that the mean value of Young’s modulus of single-wall nanotubes (SWNTs) is 1.25 TPa. Yu et al.[3] measured Yang’s modulus of multi-wall nanotubes (MWNTs) between 270 and 950 GPa and breaking strength between 11 and 63 GPa. The ele…     

Electronic structure and transport coefficients of the thermoelectric materials Bi<Subscript>2</Subscript>Te<Subscript>3</Subscript> from first-principles calculations

The electronic structures of bulk Bi₂Te₃ crystals were investigated by the first-principles calculations. The transport coefficients including Seeback coefficient and power factor were then calculated by the Boltzmann theory, and further evaluated as a function of chemical potential assuming a rigid band picture. The results suggest that p-type doping in the Bi₂Te₃ compound may be more favorable than n-type doping. From this analysis results, doping effects on a material will exhibit high ZT. Furthermore, we can also find the right doping concentration to produce more efficient materials, and present the “advantage filling element map” in detail.     

Fabrication and photocatalytic activity of Ag<Subscript>3</Subscript>PO<Subscript>4</Subscript>-TiO<Subscript>2</Subscript> heterostructural nanotube arrays

To extend the absorption capability of TiO₂ into visible light region and inhibit the recombination of photogenerated electrons and holes, we put forward an effective strategy of the coupling of TiO₂ with a suitable semiconductor that possesses a narrow band gap. Meanwhile, Ag₃PO₄-TiO₂ heterostructural nanotube arrays were prepared by the two-step anodic oxidation to obtain the TiO₂ nanotube arrays and then by a deposition-precipitation method to load Ag₃PO₄. The samples were characterized by field emission scanning electron microscopy (FESEM), energy dispersive spectrometry (EDS), X-ray diffraction (XRD), and UV-vis diffuse reflectance spectroscopy (UV-vis DRS). The experimental results showed that Ag₃PO₄ nanoparticles were uniformly dispersed on the highly ordered TiO₂ nanotube arrays, which increased the visible-light absorption of TiO₂ photocatalyst. The photocurrent density and photocatalytic degradation of methyl orange indicated that the performance of Ag₃PO₄-TiO₂ heterostructural nanotube arrays was better than that of the TiO₂ nanotube arrays, which could be attributed to the effective electron-hole separation and the improved utilization of visible light.     

Sonochemical synthesis of core/Shell structured CdS/TiO<Subscript>2</Subscript> nanocrystals composites

A simple sonochemical route for the surface coating of titanium dioxide on cadmium sulfide nanocrystal was reported. After 2 h ultrasonic irradiation treatment, the mixture of CdS nanocrystals and tetrabutyl titanate in an aqueous medium yielded CdS/TiO₂ nanocrystals composites with core/shell structure. The thickness of TiO₂ layer with smooth interface could be easily controlled via changing the concentration of the precursors and the time of irradiation. The core/shell nanocrysrals were characterized by X-ray diffraction, transmission electron microscope and UV-vis spectrometry techniques. The prepared semiconductor composites with particular band structure present appealing properties especially in photochemical activity.     

Synthesis and photocatalytic property of the ZrO<Subscript>2</Subscript>/TiO<Subscript>2</Subscript> pillared laponite

The ZrO2/TiO2 pillared laponite (Ti-Zr-lap) photocatalysts were prepared with intercalation reaction by supercritical fluid drying (SCFD),and characterized by XRD,TEM,SEM and BET surface area analysis,and the photocatalytic properties of Ti-Zr-lap were investigated by degradation of azo dye acid red B (ARB).The results showed that the ZrO2/TiO2 pillared structures in laponite could be formed,with the mass fraction of (Zr4++Ti4+)/laponite (Xm) increasing,the basal spacing and the BET surface area of Ti-Zr-lap significantly increased.The Ti-Zr-lap used as photocatalyst had the advantages of stable and porous layered structure,large surface area with the anatase type TiO2.Compared with the Ti-Zr-lap dried by air drying,the Ti-Zr-lap dried by SCFD showed better photocatalytic property which was very close to that of P25 TiO2.Using the Ti-Zr-lap as photocatalyst with the optimum Xm of 0.16 and the calcination temperature of 500 ℃,under the conditions of the initial concentration of ARB 20 mg/L,photocatalyst concentration of 1.5 g/L and irradiation time 60 min,the decoloring rate of ARB could achieve 98.3%,indicating that the Ti-Zr-lap had excellent photocatalytic property.     

Domain structure and defects of highly ordered Bi<Subscript>4</Subscript>Si<Subscript>3</Subscript>O<Subscript>12</Subscript> micro-crystals

Highly ordered Bi₄Si₃O₁₂ micro-crystals were prepared at normal atmosphere. Phase identification of the prepared crystals was accomplished by X-ray diffractometer (XRD). Domain structure and defects were characterized by environmental scanning electron microscopy (ESEM). XRD shows that the obtained micro-crystals are of eulytite structure with chemical formulation of Bi₄Si₃O₁₂. A highly ordered growth pattern is confirmed due to the faster growth of the {124} faces than that of the {204} faces by ESEM. The growing process of the domain structure is of pollen parent and filial generation pattern. The filial generations of Bi₄Si₃O₁₂ crystals are generated from the pollen parent. Cracks generate from the defect areas and propagate along the {124} faces due to their lower binding energy under a proper temperature gradient, contributing to the total transcrystalline fracture. It is confirmed that the generation and development of the voids in the crystal grains can be developed when unmatched dimensions of the two opposite faces are formed. And the development of the voids is dependent on the dimensions and orientations of the two opposite faces. Supported by the Innovation Research Team Funds of Shaanxi University of Science & Technology (Grant No. SUST-A04)     

Preparation and properties of crystallizable Glass/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> composites for LTCC material

The investigated low temperature Co fired ceramics(LTCC) composite of 60wt% CaO-Al2O3-B2O3-SiO2 glass and 40wt% α-Al2O3 as a filler is a non-reactive system, which is a critical part of the low temperature Co fired ceramics process. Through a study on densification process, the phase transformation and microstructure can be revealed. Its composites typically consist of CaO-Al2O3-B2O3-SiO2 glass and α-Al2O3 powders of average particle size (D50=3.49 mm). The sintering behavior, phase evaluation, sintered morphology, and microwave dielectric properties were investigated. In the fire range of 800 to 900 ℃, the composites were crystallized after completion of densification. It is found that the composites start to densify at 825 ℃, simultaneously, the dielectric constant (εr) reaches its maximum. With increasing heat-treatment temperatures, due to the loose microstructure of the material, tanδ increases slightly. The last of the sintered samples were identified as partly Anorthite at 850 ℃. At that temperature it has εr of 7.9 and tanδ less than 1×10-3, and can be used as a promising LTCC material.     

Preparation and mechanical properties of Al<Subscript>2</Subscript>O<Subscript>3</Subscript>/Al laminated ceramic matrix composites

Three series of Al2O3/Al laminated ceramic matrix composites,named SPA,SPV and HP,were fabricated by different methods.SPA and SPV were prepared using Al2O3 slices and Al slurry via screen printing and subsequent heat treatment in air or vacuum.HP samples were made by hot pressing the layered stack of Al foils and Al2O3 slices.SEM and XRD were applied to analyze the microstructure and the interlayer crystal phase.The bending strength,fracture toughness and fracture work of the samples made by the three methods were measured and compared.The results show that the composites have much better toughness and higher fracture work than the Al2O3 slice.Among the samples made by the three methods,the samples made by hot pressing have the optimum mechanical performance.The displacement-load curves and fracture mechanism were analyzed.     

Self-Propagating High-Temperature Reduetive Synthesis of TiB2-Al2O3 Composite Powders

TiB2-Al2O3 composite powders were produced by self-propagating high-temperature synthesis（SHS） method with reductive process from B2O3-TiO2-AI system. X-ray diffraction（XRD） and scanning electron microscopy（SEM） analyses show the presence of TiB2 and Al2O3 only in the composite powders produced by SHS. The powders are uniform and free-agglomerate. Transmission electron microscopy （TEM） and high resolution electron microscopy （HREM） observation of microstructure of the composite powders indicate that the interfaces of the TiB2-Al2O3 bond well, without any interfacial reaction products. It is proposed that the good interfacial bonding of the composite powders can be resulted from the TiB2 particles crystallizing and growing on the Al2O3 particles surface with surface defects acting as nucleation centers.     

Dielectric properties of Bi<Subscript>4</Subscript>Ti<Subscript>3</Subscript>O<Subscript>12</Subscript> ceramics by impedance spectroscopic method

Various lead-free ceramics have been investigated in search for new high-temperature dielectrics. In particular, Bi₄Ti₃O₁₂ is a type of ferroelectric ceramics, which is supposed to replace leadcontaining ceramics for its outstanding dielectric properties in the near future. Ferroelectric ceramics of Bi₄Ti₃O₁₂ made by conventional mixed oxide route have been studied by impedance spectroscopy in a wide range of temperature. X-ray diffraction patterns show that Bi₄Ti₃O₁₂ ceramics are a single-phase of ferroelectric Bi-layered perovskite structure whether it is calcined at 800 °C or after sintering production. This study focused on the effect of the grain size on the electric properties of BIT ceramics. The BIT ceramics with different grain sizes were prepared at different sintering temperatures. Grain becomes coarser with the sintering temperature increasing by 50 °C, relative permittivity and dielectric loss also change a lot. When sintered at 1 100 °C, r values peak can reach 205.40 at a frequency of 100 kHz, the minimum dielectric losses of four different frequencies make no difference, all close to 0.027. The values of E _a range from 0.52 to 0.68 eV. The dielectric properties of the sample sintered at 1 100 °C are relatively better than those of the other samples by analyzing the relationship of the grain, the internal stresses, the homogeneity and the dielectric properties. SEM can better explain the results of the dielectric spectrum at different sintering temperatures. The results show that Bi₄Ti₃O₁₂ ceramics are a kind of dielectrics. Thus, Bi₄Ti₃O₁₂ can be used in high-temperature capacitors and microwave ceramics.