Sorptive removal of Pb(II) ions from aqueous solution using sweetmeat waste: Batch and column study

This article deals with removal of Pb(II) ions from aqueous media using sweet industry byproduct, that is, sweetmeat waste (SMW). The SEM images revealed highly heterogeneous sorbent surface. XRD and FTIR studies were done. The sorption equilibrium time was found 45 min only, and the sorption followed pseudo-second-order reaction model, indicating chemisorption as the rate-limiting step. Pb(II) removal followed Langmuir isotherm model best, and the maximum sorption capacity was 11.38 mg/g. The fixed bed column study was performed and analyzed using Logit, Bohart-Adams and Wolborska models. The sorption rate and capacity constants were 0.143(±0.017) L/mg.h and 39(±7) mg/L, respectively.     

Kinetic and Equilibrium Modeling of Pb(II) and Co(II) Sorption onto Rose Waste Biomass

Abstract

An attempt was made to assess the biosorption potential of rose waste biomass for the removal of Pb(II) and Co(II) ions from synthetic effluents. Biosorption of heavy metal ions (>90%) reached equilibrium in 30 min. Maximum removal of Pb(II) and Co(II) occurred at pH 5 and 6 respectively. The biosorbent dose for efficient uptake of Pb(II) and Co(II) was 0.5 g/L for both metals. The biosorbent size affected the Pb(II) and Co(II) biosorption rate and capacity. Rose waste biomass was found effective for Pb(II) and Co(II) removal from synthetic effluents in the concentration range 10–640 mg/L. Equilibrium sorption studies showed that the extent of Pb(II) and Co(II) uptake by the rose waste biomass was better described by the Langmuir isotherm in comparison to the Freundlich model. The uptake capacities of the two metal ions were 156 and 27.15 mg/g for Pb(II) and Co(II) respectively.     

Efficient removal of Cr(VI) and Pb(II) from aqueous solution by magnetic nitrogen-doped carbon

The magnetic nitrogen-doped carbon (MNC) was prepared from polypyrrole by a simple high temperature calcination process in this paper. The structure and properties of MNC were analyzed by scanning electron microscope, Fourier transform infrared spectroscopy, X-ray diffraction, Brunner-Emmet-Teller, vibrating sample magnetometer, and X-ray photoelectron spectroscopy. The capacity of MNC to adsorb Cr(VI) and Pb(II) was evaluated. The effects of the initial pH, dosage, concentration and temperature on the adsorption capacity of MNC were measured. MNC had a large specific surface area and a special porous structure. Its nitrogen and carbon sources were rich, and the ratio of carbon to nitrogen was fixed. The maximum Cr(VI)-adsorption capacity and maximum Pb(II) adsorption capacity of MNC could reach 456.63 and 507.13 mg∙g⁻¹ at 318 K, respectively. The pseudo-second-order model was used to describe the adsorption kinetics of MNC, and the Freundlich model was employed to discuss its isotherms. The adsorption process was affected by the electrostatic force, the reducing reaction, pores and chelation. The results of this study suggest that MNC is a material with superior performance, and is very easily regenerated, reused, and separated in the adsorption process.     

Fast removal of Pb(II) and Cu(II) from contaminated water by groundwater treatment waste: impact of sorbent composition

ABSTRACT

A non-hazardous groundwater treatment waste (GWTW) was examined as a low-cost sorbent for Pb(II) and Cu(II) ions. The content of the dominant elements in GWTW was as follows: 78% Fe₂O₃, 7.4% P₂O₅, 7.4% CaO and 5.2% SiO₂. The removal of Pb(II) and Cu(II) was fast, and more than 67–95% of ions were accumulated by GWTW during the first 3 min. The sorption capacity of GWTW depends on solution pH, concentration and temperature. Equilibrium data fitted well with Langmuir–Freundlich and Langmuir-partition models. The inherently formed nano-adsorbent could be utilized for the treatment of water contaminated with Pb(II) and Cu(II) ions.     

Sorption of Pb(II), Cd(II) and Zn(II) by iminodiacetate chelating resins in non-competitive and competitive conditions

Two chelating resins (CRs) bearing iminodiacetate (IDA) groups derived from acrylonitrile - divinylbenzene (AN-DVB) copolymers having 10 and 15 wt.% nominal cross-linking degrees and a high mobility of the functional groups caused by the presence of a longer spacer between the matrix and the IDA groups were synthesized and tested as sorbents for heavy metal ions like: Pb(II), Cd(II) and Zn(II) from aqueous solutions by batch and column techniques. Experimental data obtained from batch equilibrium tests have been analyzed by two isotherm models: Freundlich and Langmuir. The overall adsorption tendency of CRs toward Pb(II), Cd(II) and Zn(II), under non-competitive conditions, followed the order: Cd(II) > Pb(II) > Zn(II). Selectivity studies were performed in ternary mixture of Pb(II), Cd(II) and Zn(II) to check if the synthesized CRs can be useful for selective separation of heavy metal cations. The results revealed that the CRs with IDA groups exhibited high selectivity toward Pb(II), both in batch and column techniques. Regeneration of the resins was achieved using 0.1 M HCl solution.     

Biosorption of Pb(II) ions from aqueous solution by pine bark (Pinus brutia Ten.)

The biosorption potential of pine (Pinus brutia Ten.) bark in a batch system for the removal of Pb(II) ions from aqueous solutions was investigated. The biosorption characteristics of Pb(II) ions on the pine bark was investigated with respect to well-established effective parameters including the effects of solution pH, initial Pb(II) concentration, mass of bark, temperature, and interfering ions present, reusability, and desorption. Initial solution pH and contact time were optimized to 4.0 and 4 h, respectively. The Langmuir and Freundlich equilibrium adsorption models were studied and observed to fit well. The maximum adsorption capacity of the bark for Pb(II) was found to be 76.8 mg g⁻¹ by Langmuir isotherms (mass of bark: 1.0 g L⁻¹). The kinetic data fitted the pseudo-second-order model with correlation coefficient greater than 0.99. The thermodynamic parameters Gibbs free energy (ΔG°), enthalpy (ΔH°), and entropy (ΔS°) changes were also calculated, and the values indicated that the biosorption process was spontaneous. Reutilization of the biosorbent was feasible with a 90.7% desorption efficiency using 0.5 M HCl. It was concluded that pine bark can be used as an effective, low cost, and environmentally friendly biosorbent for the removal of Pb(II) ions from aqueous solution.     

Sorption studies for Cd(II) sequestration from aqueous solution on chemically modified Albizia lebbeck

In the present work, a new sorbent was successfully prepared by chemically modifying pods of Albizia lebbeck (AL) by Fenton’s reagent, followed by sodium silicate. Sorption studies were carried out by batch process. The optimum pH was found to be 6. Equilibrium isotherm data were analysed by non-linear curve fitting analysis, to fit Langmuir, Freundlich and Temkin isotherm models. Based on the Langmuir isotherm model, maximum monolayer sorption capacity (qm) was found to be 21.22 mg.g^?1 at 50°C. Breakthrough and exhaustive capacities were found to be 10 and 50 mg.g^?1, respectively. Desorption study showed 95% recovery of Cd(II) ions.     

A novel agricultural waste based adsorbent for the removal of Pb(II) from aqueous solution: Kinetics,equilibrium and thermodynamic studies

Fig sawdust was used as a precursor for the production of activated carbon by chemical activation with H₃PO₄. The developed Fig sawdust activated carbon (FSAC) was used as a biosorbent for the removal of Pb(II) from aqueous solution. Highest adsorption of Pb(II) (95.8%) was found at pH 4. Equilibrium data fitted very well with the Langmuir isotherm model. Maximum adsorption capacity was determined 80.645 mg g⁻¹ at pH 4. Kinetic studies demonstrated that the adsorption followed a pseudo second order kinetics model. The negative value of ΔG° confirmed the feasibility and spontaneity of FSAC for Pb(II) adsorption.     

Removal of Zn(II) from aqueous solution with natural Chinese loess: Behaviors and affecting factors

The Chinese loess was proved a promising adsorbent for Zn(II) removal from aqueous solution with adsorption capacities at 70.2-83.2 mg g^− 1 at 15-45 °C. Batch tests were conducted to evaluate the factors affecting the removal efficiency, of which the pH, temperature and initial Zn concentration all found in positive relevance to the increase of Zn(II) removal efficiency except for the slurry concentration. The uptake of Zn(II) on Chinese loess was considered as ion-exchange adsorption based on the calculated adsorption energy at − 12.8 to − 16.18 kJ mol^− 1 by D-R isothermal adsorption model. The adsorption kinetics follows the pseudo-second-order kinetics and the equilibrating duration was found to be > 24 h. Thermodynamic investigation shows that the enthalpy and entropy changes during adsorption are in the range of 18.27-47.83 kJ mol^− 1 and 52.7-129.6 J mol^− 1 K^− 1, respectively. The predicted Gibb's free energies were in the range of − 5.97-3.09 kJ mol^− 1, indicating that the adsorption was in favor of higher temperature and lower initial Zn(II) concentration. The optimal Zn(II) removal efficiency could be obtained under the following conditions: low or intermediate Zn(II) concentration, long reaction time, high temperature and initial pH > 3.0.     

Zn(II) ions removal from aqueous solution by Karachi beach sand, a mixed crystal systems

The aim of this research work is to investigate sorption characteristic of beach sand for the removal of Zn(II) ions from aqueous solutions. The sorption of Zn(II) ions by batch dynamic method is carried out using dilute solutions (10⁻⁴ M) of nitric, hydrochloric and perchloric acids along with deionized water and from buffers of pH 2–10. Maximum sorption is noticed from deionized water (88.3%) using 30 min shaking time. Two equations, i.e. Morris–Weber and Lagergren have been tested to track the kinetics of removal process. The Langmuir, Freundlich and Dubinin–Radushkevich (D–R) model are subjected to sorption data to estimate sorption capacity, intensity and energy. The thermodynamic parameters ΔH, ΔS and ΔG are evaluated. The influence of common ions on the sorption of Zn(II) ions is also examined. Some ions reduce the sorption while most of the ions tested have very little effect. It can be concluded that beach sand has potential to remove Zn(II) ions from aqueous solutions at very low concentrations and for the treatment of industrial effluent carrying Zn(II) ions.     

Preparation and characterization of magnetic polymethylmethacrylate microbeads carrying ethylene diamine for removal of Cu(II), Cd(II), Pb(II), and Hg(II) from aqueous solutions

Magnetic polymethylmethacrylate (mPMMA) microbeads carrying ethylene diamine (EDA) were prepared for the removal of heavy metal ions (i.e., copper, lead, cadmium, and mercury) from aqueous solutions containing different amount of these ions (5–700 mg/L) and at different pH values (2.0–8.0). Adsorption of heavy metal ions on the unmodified mPMMA microbeads was very low (3.6 μmol/g for Cu(II), 4.2 μmol/g for Pb(II), 4.6 μmol/g for Cd(II), and 2.9 μmol/g for Hg(II)). EDA‐incorporation significantly increased the heavy metal adsorption (201 μmol/g for Cu(II), 186 μmol/g for Pb(II), 162 μmol/g for Cd(II), and 150 μmol/g for Hg(II)). Competitive adsorption capacities (in the case of adsorption from mixture) were determined to be 79.8 μmol/g for Cu(II), 58.7 μmol/g for Pb(II), 52.4 μmol/g for Cd(II), and 45.3 μmol/g for Hg(II). The observed affinity order in adsorption was found to be Cu(II) > Pb(II) > Cd(II) > Hg(II) for both under noncompetitive and competitive conditions. The adsorption of heavy metal ions increased with increasing pH and reached a plateau value at around pH 5.0. The optimal pH range for heavy‐metal removal was shown to be from 5.0 to 8.0. Desorption of heavy‐metal ions was achieved using 0.1 M HNO₃. The maximum elution value was as high as 98%. These microbeads are suitable for repeated use for more than five adsorption‐desorption cycles without considerable loss of adsorption capacity. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 78: 81–89, 2000     

Pb(II) biosorption using DAP/EDTA-modified biopolymer (Chitosan)

Abstract

In this study, chitosan was chemically modified with only diammonium phosphate (DAP) and DAP/EDTA (ethylenediaminetetraacetic acid) mixture for the removal of Pb(II) ions from aqueous solution. Modified chitosan forms were analyzed using thermo-gravimetric analyzer (TGA), Fourier transform infrared (FTIR) spectroscopy, and scanning electron microscopy (SEM) to investigate the thermal degradation behavior, structural modifications, and the surface texture of the cross-linked chitosan adsorbents, respectively. The adsorption results were analyzed by well-known kinetic and isotherm models. The kinetics of metal adsorption followed the pseudo-second-order model. The maximum sorption capacities obtained from the Langmuir isotherm model were 126?mg/g for diammonium phosphate-modified Chitosan (DMC) and 137?mg/g for DAP/EDTA-modified chitosan (EDMC). The thermodynamic analysis showed that the metal removal process was endothermic in nature.     

Preparation of Low-Cost Adsorbents from Paper Industry Wastes and their Pb(II) Removal Behavior in Water

In this study, we prepare low-cost adsorbents from paper industry waste (newspaper (NP) and white paper (WP) waste) through a simple drying process and used them for Pb(II) removal. Characteristics, maximum Pb(II) removal capacities of prepared adsorbents, and Pb(II) removal mechanisms are investigated. The maximum amounts of adsorbed Pb(II) on NP and WP derived from the Langmuir isotherm are 42.4 and 18.5 mg·g^?1, respectively. This value is similar or more effective than commercial and other low-cost Pb(II) sorbents. It indicates that low-cost adsorbents prepared from paper industry waste have high potential as inexpensive and effective heavy metal adsorbents.     

Adsorption of Pb(II) ions from aqueous solutions by carbon nanotubes oxidized different methods

This study investigated the heavy metal adsorption of the carbon nanotubes (CNTs) oxidized different methods. Besides the conventional ultrasonication method, the UV-light used as an oxidation agent. The two oxidation methods compared with each other by Pb(II) adsorption. The characterizations of oxidized CNTs were analyzed by FTIR, XRD, DTG, SEM and total acidity capacity analysis. The adsorption capacities of carbon nanotubes were compared with using Langmuir and Freundlich isotherms. Two different kinetic theories were applied to experimental data. These theories are pseudo-second order and intra-particle diffusion models. The adsorption results can be compared using non-linear Langmuir isotherm parameters. For single wall carbon nanotubes (SWCNTs), theoretical adsorption capacity value (Q_m) of UV-light method is 511.99 mg/g and ultrasonication method is 342.36 mg/g. The UV-light increased the surface acidity of the carbon nanotubes more than ultrasonication. After the adsorption experiments, it is apparently seen that the UV-light oxidation method is a useful method for heavy metal adsorption.     

Influence of natural pozzolan, colemanite ore waste, bottom ash, and fly ash on the properties of Portland cement

This study has examined the effect of natural pozzolan (NP), colemanite ore waste (CW), coal fly ash (FA), and coal bottom ash (BA) on the properties of cement and concrete. The parameters studied included compressive strength, bending strength, volume expansion, and setting time. A number of cements were prepared (in the presence of fixed quantity of 10% FA, 10% BA, and 4% CW) by the replacement of Portland cement (PC) with NP in range of 5-30%. The results showed that the final setting time of cement pastes were generally accelerated when the NP replaced part of the cement. However, NP exhibited a significant retarding effect when used in combination with CW. The results also showed that the inclusion of NP at replacement levels of 5% resulted in an increase in compressive strength of the specimens compared with that of the control concrete. The replacement of PC by 10-15% of NP in the presence of fixed quantity of CW improves the bending strength of the specimens compared with control specimens after 60 days of curing age.     

Investigation of Pb(II) adsorption onto natural and synthetic polymers

Adsorption of toxic metal ion Pb(II) onto two different insoluble humic acids (IHAs) obtained from Beysehir (BIHA) and Ermenek (EIHA) low grade lignites and two synthesized terpolymers: styrene-divinylbenzene-methacrylic acid (SDBM) and styrene-divinylbenzene allylmethacrylate (SDBAM) were investigated and compared with commercial activated carbon (AC). The synthesized polymers were characterized by FTIR. Effects of pH (in neutral and acidic range), time, and initial metal concentration on the effectiveness of IHAs and terpolymers were determined. All synthesized adsorbents could adsorb Pb(II) with much higher capacity at half of the retention of AC in acidic medium. The adsorption capacities varied in the range of 51–76 mg g⁻¹. The affinity order of polymers in acidic medium for Pb(II) ions was observed as: SDBAM>SDBM>BIHA≈EIHA>AC. IHAs fit Freundlich model while SDB polymers were fitting Langmuir isotherm. The maximum adsorption capacities in neutral medium were 48 mg g⁻¹ for SDBM and 15 mg g⁻¹ for BIHA. Desorption studies for the polymer of highest performance indicated that about 90% desorption was achieved at 5 h by using EDTA regenerant solution. The polymer can be used repeatedly in Pb(II) adsorption with close capacities to initial use. The higher selectivity of SDBAM to Pb(II) ions in multimetal solution was also indicated in the study. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Recent studies in adsorption of Pb(II), Zn(II) and Co(II) using conventional and modified materials:a review

ABSTRACT

Heavy metal contamination and its detrimental effects on human health and environment have been a worldwide concern. Over the years, various technologies have been adapted to tackle this problem. Adsorption is still considered to be one of the most feasible and cost-effective methods for treating wastewater contaminated with heavy metals. Adsorbents such as activated carbon, clay, zeolites and silica have been studied extensively in the past. Modification of these conventional adsorbents and the synthesis of nonconventional adsorbents such as nanocomposites and metal organic frameworks (MOF’s) have been the main focus of study in recent times. This review article attempts to present a detailed account of various adsorbents and their removal efficiencies for the treatment of wastewater contaminated with lead(II), zinc(II) and cobalt(II) in the current decade. Influence of various parameters, adsorption isotherms and kinetics best described for their removal have also been reviewed in detail. It is observed that most of the adsorbents followed pseudo second order kinetics suggestive of a chemisorption process. After conducting a thorough review of more than 120 recently published papers, it can be inferred that nanomaterials and nanocomposites have shown excellent adsorption capacity for removal of these heavy metals.     

改性膨润土对废水中Cd(II)的吸附特征及吸附动力学研究

为探讨改性膨润土对Cd(II)的吸附特征及吸附动力学机制,通过吸附实验探讨了pH值、初始浓度和吸附时间对改性膨润土吸附Cd(II)的影响。结果表明,盐酸改性膨润土对Cd(II)的去除率表现为随溶液pH值升高而升高,而氢氧化钠改性膨润土、膨润土与十二烷基磺酸钠改性膨润土的去除率分别在pH=6和7时达到最大值。膨润土及改性膨润土对Cd(II)的去除率随初始浓度的增加而降低,吸附量随平衡浓度增加而增大,并趋向平稳,吸附符合Langmuir方程,吸附为单分子层吸附。膨润土及改性膨润土的吸附反应在240 min内基本达到平衡,吸附动力学分析表明吸附过程更符合准二级动力学模型,吸附过程以化学吸附为主,膨润土及改性膨润土的吸附速率大小依次为K2HCl-B＞K2NaOH-B＞K2B＞K2SDS-B,液膜扩散与颗粒内扩散过程均为控速步骤。该研究可为改性膨润土处理含镉废水和修复镉污染土壤提供参考。