A CMOS 10-gb/s SONET transceiver

This paper presents a single-chip SONET OC-192 transceiver (transmitter and receiver) fabricated in a 90-nm mixed-signal CMOS process. The transmitter consists of a 10-GHz clock multiplier unit (CMU), 16:1 multiplexer, and 10-Gb/s output buffer. The receiver consists of a 10-Gb/s limiting input amplifier, clock and data recovery circuit (CDR), 1:16 demultiplexer, and drivers for low-voltage differential signal (LVDS) outputs. Both transmit and receive phase-locked loops employ a 10-GHz on-chip LC voltage-controlled oscillator (VCO). This transceiver exceeds all SONET OC-192 specifications with ample margin. Jitter generation at 10.66-Gb/s data rate is 18 mUI/sub pp/ (unit interval, peak-to-peak) and jitter tolerance is 0.6 UI/sub pp/ at 4-MHz jitter frequency. This transceiver requires 1.2V for the core logic and 1.8 V for input/output LVDS buffers. Multiple power supply domains are implemented here to mitigate crosstalk between receiver and transmitter. The overall power dissipation of this chip is 1.65 W.     

Low-power fully integrated 10-Gb/s SONET/SDH transceiver in 0.13-/spl mu/m CMOS

Here, we present a low-power fully integrated 10-Gb/s transceiver in 0.13-/spl mu/m CMOS. This transceiver comprises full transmit and receive functions, including 1:16 multiplex and demultiplex functions, high-sensitivity limiting amplifier, on-chip 10-GHz clock synthesizer, clock-data recovery, 10-GHz data and clock drivers, and an SFI-4 compliant 16-bit LVDS interface. The transceiver exceeds all SONET/SDH (OC-192/STM-64) jitter requirements with significant margin: receiver high-frequency jitter tolerance exceeds 0.3 UI/sub pp/ and transmitter jitter generation is 30 mUI/sub pp/. All functionality and specifications (core and I/O) are achieved with power dissipation of less than 1 W.     

A 40-Gb/s clock and data recovery circuit in 0.18-/spl mu/m CMOS technology

A phase-locked clock and data recovery circuit incorporates a multiphase LC oscillator and a quarter-rate bang-bang phase detector. The oscillator is based on differential excitation of a closed-loop transmission line at evenly spaced points, providing half-quadrature phases. The phase detector employs eight flip-flops to sample the input every 12.5 ps, detecting data transitions while retiming and demultiplexing the data into four 10-Gb/s outputs. Fabricated in 0.18-/spl mu/m CMOS technology, the circuit produces a clock jitter of 0.9 ps/sub rms/ and 9.67 ps/sub pp/ with a PRBS of 2/sup 31/-1 while consuming 144 mW from a 2-V supply.     

A 20-Gb/s 0.13-/spl mu/m CMOS serial link transmitter using an LC-PLL to directly drive the output multiplexer

A 20-Gb/s transmitter is implemented in 0.13-/spl mu/m CMOS technology. An on-die 10-GHz LC oscillator phase-locked loop (PLL) creates two sinusoidal 10-GHz complementary clock phases as well as eight 2.5-GHz interleaved feedback divider clock phases. After a 2/sup 20/-1 pseudorandom bit sequence generator (PRBS) creates eight 2.5-Gb/s data streams, the eight 2.5-GHz interleaved clocks 4:1 multiplex the eight 2.5-Gb/s data streams to two 10-Gb/s data streams. 10-GHz analog sample-and-hold circuits retime the two 10-Gb/s data streams to be in phase with the 10-GHz complementary clocks. Two-tap equalization of the 10-Gb/s data streams compensate for bandwidth rolloff of the 10-Gb/s data outputs at the 10-GHz analog latches. A final 20-Gb/s 2:1 output multiplexer, clocked by the complementary 10-GHz clock phases, creates 20-Gb/s data from the two retimed 10-Gb/s data streams. The LC-VCO is integrated with the output multiplexer and analog latches, resonating the load and eliminating the need for clock buffers, reducing power supply induced jitter and static phase mismatch. Power, active die area, and jitter (rms/pk-pk) are 165 mW, 650 /spl mu/m/spl times/350 /spl mu/m, and 2.37 ps/15 ps, respectively.     

A 10-GB/s SONET-compliant CMOS transceiver with low crosstalk and intrinsic jitter

A 4:1 SERDES IC suitable for SONET OC-192 and 10-Gb/s Ethernet is presented. The receiver, which consists of a limiting amplifier, a clock and data recovery unit, and a demultiplexer, locks automatically to all data rates in the range 9.95-10.7 Gb/s. At a bit error rate of less than 10/sup -12/, it has a sensitivity of 20 mV. The transmitter comprises a clock multiplying unit and a multiplexer. The jitter of the transmitted data signal is 0.2 ps RMS. This is facilitated by a novel notched inductor layout and a special power supply concept, which reduces cross-coupling between the transmitter and receiver. Integrated in a 0.13-/spl mu/m CMOS technology, the total power consumption from both 1.2- and 2.5-V supplies is less than 1 W.     

A 0.18-/spl mu/m SiGe BiCMOS receiver and transmitter chipset for SONET OC-768 transmission systems

A 43-Gb/s receiver (Rx) and transmitter (Tx) chip set for SONET OC-768 transmission systems is reported. Both ICs are implemented in a 0.18-/spl mu/m SiGe BiCMOS technology featuring 120-GHz f/sub T/ and 100 GHz f/sub max/. The Rx includes a limiting amplifier, a half-rate clock and data recovery unit, a 1:4 demultiplexer, a frequency acquisition aid, and a frequency lock detector. Input sensitivity for a bit-error rate less than 10/sup -9/ is 40 mV and jitter generation better than 230 fs rms. The IC dissipates 2.4 W from a -3.6-V supply voltage. The Tx integrates a half-rate clock multiplier unit with a 4:1 multiplexer. Measured clock jitter generation is better than 170 fs rms. The IC consumes 2.3 W from a -3.6-V supply voltage.     

A CMOS multichannel 10-Gb/s transceiver

We describe a CMOS multichannel transceiver that transmits and receives 10 Gb/s per channel over balanced copper media. The transceiver consists of two identical 10-Gb/s modules. Each module operates off a single 1.2-V supply and has a single 5-GHz phase-locked loop to supply a reference clock to two transmitter (Tx) channels and two receiver (Rx) channels. To track the input-signal phase, the Rx channel has a clock recovery unit (CRU), which uses a phase-interpolator-based timing generator and digital loop filter. The CRU can adjust the recovered clock phase with a resolution of 1.56 ps. Two sets of two-channel transceiver units were fabricated in 0.11-/spl mu/m CMOS on a single test chip. The transceiver unit size was 1.6 mm /spl times/ 2.6 mm. The Rx sensitivity was 120-mVp-p differential with a 70-ps phase margin for a common-mode voltage ranging from 0.6 to 1.0 V. The evaluated jitter tolerance curve met the OC-192 specification.     

A 10-Gb/s CDR/DEMUX with LC delay line VCO in 0.18-/spl mu/m CMOS

A monolithic 10-Gb/s clock/data recovery and 1:2 demultiplexer are implemented in 0.18-/spl mu/m CMOS. The quadrature LC delay line oscillator has a tuning range of 125 MHz and a 60-MHz/V sensitivity to power supply pulling. The circuit meets SONET OC-192 jitter specifications with a measured jitter of 8 ps p-p when performing error-free recovery of PRBS 2/sup 31/-1 data. Clock and data recovery (CDR) is achieved at 10 Gb/s, demonstrating the feasibility of a half-rate early/late PD (with tri-state) based CDR on 0.18-/spl mu/m CMOS. The 1.9/spl times/1.5 mm/sup 2/ IC (not including output buffers) consumes 285 mW from a 1.8-V supply.     

10 GHz full-rate clock and data recovery circuit in 0.18 /spl mu/m CMOS without external reference clock

The design of a fully monolithic integrated 10 GHz full-rate clock and data recovery (CDR) circuit in 0.18 /spl mu/m digital CMOS technology, which employs an injection phase-locked loop (PLL) technique is presented. The CDR operating without the external reference exhibits a capture range of 200 MHz while consuming 205 mA current from 1.8 V supply including the output buffer. The recovered clock signal with 250 mV/sub pp/ pseudorandom bit Sequence input data of length 2/sup 31/-1 exhibits 7.9 ps of peak-to-peak (p-p) and 1.1 ps of root-mean-square (RMS) jitter. The measured clock phase noise at 1 MHz offset is approximately -109 dBc/Hz.     

Fully electrical 40-Gb/s TDM system prototype based on InP HEMTdigital IC technologies

This paper presents a fully electrical 40-Gb/s time-division-multiplexing (TDM) system prototype transmitter and receiver. The input and output interface of the prototype are four-channel 10-Gb/s signals. The prototype can be mounted on a 300-mm-height rack and offers stable 40-Gb/s operation with a single power supply voltage. InP high-electron mobility transistor (HEMT) digital IC's perform 40-Gb/s multiplexing/demultiplexing and regeneration. In the receiver prototype, unitraveling-carrier photodiode (UTC-PD) generates 1 V_pp output and directly drives the InP HEMT decision circuit (DEC) without any need for an electronic amplifier. A clock recovery circuit recovers a 40-GHz clock with jitter of 220 fs_pp from a 40-Gb/s nonreturn-to-zero (NRZ) optical input. The tolerable dispersion range of the prototype within a 1-dB penalty from the receiver sensitivity at zero-dispersion is as wide as 95 ps/nm, and the clock phase margin is wider than 70° over almost all the tolerable dispersion range. A 100-km-long transmission experiment was performed using the prototype. A high receiver sensitivity [-25.1 dBm for NRZ (2⁷-1) pseudorandom binary sequence (PRBS)] was obtained after the transmission. The 40-Gb/s regeneration of the InP DEC suppressed the deviation in sensitivity among output channels to only 0.3 dB. In addition, four-channel 40-Gb/s wavelength-division-multiplexing (WDM) transmission was successfully performed     

A 10-Gb/s CMOS clock and data recovery circuit with a half-rate binary phase/frequency detector

A 10-Gb/s phase-locked clock and data recovery circuit incorporates a multiphase LC oscillator and a half-rate phase/frequency detector with automatic data retiming. Fabricated in 0.18-/spl mu/m CMOS technology in an area of 1.75/spl times/1.55 mm/sup 2/, the circuit exhibits a capture range of 1.43 GHz, an rms jitter of 0.8 ps, a peak-to-peak jitter of 9.9 ps, and a bit error rate of 10/sup -9/ with a pseudorandom bit sequence of 2/sup 23/-1. The power dissipation excluding the output buffers is 91 mW from a 1.8-V supply.     

A second-order semidigital clock recovery circuit based on injection locking

A compact (1 mm /spl times/ 160 /spl mu/m) and low-power (80-mW) 0.18-/spl mu/m CMOS 3.125-Gb/s clock and data recovery circuit is described. The circuit utilizes injection locking to filter out high-frequency reference clock jitter and multiplying delay-locked loop duty-cycle distortions. The injection-locked slave oscillator output can have its output clocks interpolated by current steering the injecting clocks. A second-order clock and data recovery is introduced to perform the interpolation and is capable of tracking frequency offsets while exhibiting low phase wander.     

A 43-Gb/s full-rate clock transmitter in 0.18-/spl mu/m SiGe BiCMOS technology

A 43-Gb/s full-rate clock transmitter chip for SONET OC-768 transmission systems is reported. The IC is implemented in a 0.18-/spl mu/m SiGe BiCMOS technology featuring 120 GHz f/sub T/ and 100 GHz f/sub max/ HBTs. It consists of a 4:1 multiplexer, a clock multiplier unit, and a frequency lock detector. The IC features clock jitter generation of 260 fs rms and dissipates 2.3 W from a -3.6-V supply voltage. Measurement results are compared to a previously reported half-rate clock transmitter designed using the same technology.     

A 3.125-Gb/s clock and data recovery circuit for the 10-Gbase-LX4 Ethernet

A 3.125-Gb/s clock and data recovery (CDR) circuit using a half-rate digital quadricorrelator frequency detector and a shifted-averaging voltage-controlled oscillator is presented for 10-Gbase-LX4 Ethernet. It can achieve low-jitter operation and improve pull-in range without a reference clock. This CDR circuit has been fabricated in a standard 0.18-/spl mu/m CMOS technology. It occupies an active area of 0.6 /spl times/ 0.8 mm/sup 2/ and consumes 83 mW from a single 1.8-V supply. The measured bit-error rate is less than 10/sup -12/ for 2/sup 7/ - 1 PRBS 3.125-Gb/s data. It can meet the jitter tolerance specifications for the 10-Gbase-LX4 Ethernet application.     

A 33-mW 8-Gb/s CMOS clock multiplier and CDR for highly integrated I/Os

A 0.622-8-Gb/s clock and data recovery (CDR) circuit using injection locking for jitter suppression and phase interpolation in high-bandwidth system-on-chip solutions is described. A slave injection locked oscillator (SILO) is locked to a tracking aperture-multiplying DLL (TA-MDLL) via a coarse phase selection multiplexer (MUX). For the fine timing vernier, an interpolator DAC controls the injection strength of the MUX output into the SILO. This 1.2-V 0.13-/spl mu/m CMOS CDR consumes 33 mW at 8Gb/s. Die area including voltage regulator is 0.08 mm/sup 2/. Recovered clock jitter is 49 ps pk-pk at a 200-ppm bit-rate offset.     

SiGe-HBT-based 54-gb/s 4:1 multiplexer IC with full-rate clock for serial communication systems

A 4:1 multiplexer (MUX) IC for 40 Gb/s and above operations in optical fiber link systems has been developed. The ICs are based on 122-GHz-f/sub T/ 0.2-/spl mu/m self-aligned selective-epitaxial-growth SiGe HBT technology. To reduce output jitter caused by clock duty distortion, a master-slave delayed flip-flop (MS-DFF) with full-rate clock for data retiming is used at the final stage of the MUX IC. In the timing design of the critical circuit for full-rate clocking, robust timing design that has a wide timing margin between data and clock at the MS-DFF was achieved. Measurements using on-wafer probes showed that the MUX attained 54-Gb/s operation with an output voltage-swing of 400 mVpp. The output rms jitter generated by the MUX was 0.91 ps and tr/tf (10%-90%) was 11.4/11.3 ps at a data rate of 50 Gb/s. Power consumption of the IC was 2.95 W at a power supply of -4.8 V. Error-free operation (<10/sup -12/) in back-to-back configuration of the MUX and a 1:4 DEMUX IC module at a data rate of 45 Gb/s was confirmed. We therefore concluded that the MUX IC can be applied for transmitter functions in optical-fiber-link systems at a data rate of 40 Gb/s and higher for forward error correction.     

High gain-bandwidth differential distributed InP D-HBT driver amplifiers with large (11.3 V/sub pp/) output swing at 40 Gb/s

High-performance and compact 40-Gb/s driver amplifiers were realized in 1.2-/spl mu/m emitter double-heterojunction InGaAs-InP HBT (D-HBT) technology with a maximum cut-off frequency (f/sub T/) of 150 GHz and a maximum oscillation frequency (f/sub max/) of 200 GHz. Two-stage differential drivers feature a lumped input and fully distributed output stage and deliver a maximum differential output swing of 11.3 V peak-to-peak (V/sub pp/) at 40 Gb/s with less then 350 fs of added rms jitter and rise and fall times of about 7 ps while consuming a total power of 3 W. When biased at a lower output swing of 6.3 V/sub pp/, excellent 40-Gb/s eyes with a 7-ps fall time, 6-ps rise time, and no observable jitter deterioration compared with the input source are obtained at a reduced power consumption of 1.7 W. On-wafer measured differential S-parameters show a differential gain of 25 dB, 50 GHz bandwidth, and input and output reflection below -20 dB from 2 to 45 GHz. The amplifiers' small die size (1.0/spl times/1.7 mm), relatively low power consumption, large output swing, and ability to have dc coupled inputs and outputs enable compact 40-Gb/s optical transmitters with good eye opening for both conventional transmission formats such as nonreturn-to-zero and return-to-zero and alternative formats such as duobinary and differential phase shift keying.     

A four-channel 3.125-Gb/s/ch CMOS serial-link transceiver with a mixed-mode adaptive equalizer

This work presents a quad-channel serial-link transceiver providing a maximum full duplex raw data rate of 12.5Gb/s for a single 10-Gbit eXtended Attachment Unit Interface (XAUI) in a standard 0.18-/spl mu/m CMOS technology. To achieve low bit-error rate (BER) and high-speed operation, a mixed-mode least-mean-square (LMS) adaptive equalizer and a low-jitter delay-immune clock data recovery (CDR) circuit are used. The transceiver achieves BER lower than <4.5/spl times/10/sup -15/ while its transmitted data and recovered clock have a low jitter of 46 and 64 ps in peak-to-peak, respectively. The chip consumes 178 mW per each channel at 3.125-Gb/s/ch full duplex (TX/RX simultaneous) data rate from 1.8-V power supply.     

A 10-Gb/s 16:1 multiplexer and 10-GHz clock synthesizer in0.25-μm SiGe BiCMOS

A 10-Gb/s 16:1 multiplexer, 10-GHz clock generator phase-locked loop (PLL), and 6 × 16 b input data buffer are integrated in a 0.25-μm SiGe BiCMOS technology. The chip multiplexes 16 parallel input data streams each at 622 Mb/s into a 9.953-Gb/s serial output stream. The device also produces a 9.953-GHz output clock from a 622- or 155-MHz reference frequency. The on-board 10-GHz voltage-controlled oscillator (VCO) has a 10% tuning range allowing the chip to accommodate both the SONET/SDH data rate of 9.953 Gb/s and a forward error correction coding rate of 10.664 Gb/s. The 6 × 16 b input data buffer accommodates ±2.4 ns of parallel input data phase drift at 622 Mb/s. A delay-locked loop (DLL) in the input data buffer allows the support of multiple input clocking modes. Using a clock generator PLL bandwidth of 6 MHz, the 9.953-GHz output clock exhibits a generated jitter of less than 0.05 UI_P-P over a 50-kHz to 80-MHz bandwidth and jitter peaking of less than 0.05 dB     

A 2.5-10-GHz clock multiplier unit with 0.22-ps RMS jitter in standard 0.18-/spl mu/m CMOS

This paper demonstrates a low-jitter clock multiplier unit that generates a 10-GHz output clock from a 2.5-GHz reference clock. An integrated 10-GHz LC oscillator is locked to the input clock, using a simple and fast phase detector circuit that overcomes the speed limitation of a conventional tri-state phase frequency detector due to the lack of an internal feedback loop. A frequency detector guarantees PLL locking without degenerating jitter performance. The clock multiplier is implemented in a standard 0.18-/spl mu/m CMOS process and achieves a jitter generation of 0.22 ps while consuming 100 mW power from a 1.8-V supply.