高钛渣直流电弧炉无功补偿装置

通过分析云南新立有色金属有限公司80 kt/a高钛渣工程大功率直流电弧炉产生大量的谐波和冲击负荷对电网的危害性,阐述了静止型动态无功补偿装置的工作原理及在该工程项目中的应用.     

云南某密闭直流电弧炉冶炼酸溶渣可行性分析

以钛渣代替钛铁矿为硫酸法钛白粉生产的原料,可以减少硫酸消耗量,有效克服硫酸法废副产物多、环境污染大以及硫酸消耗量大等缺点。以生产数据为基础,分析云南某公司密闭直流电弧炉熔炼钛渣杂质成分及含量、钛渣粒度。在不同的渣酸比、酸解反应温度、酸解反应时间试验条件下,产品钛渣酸解率最低为89.443%。对比中华人民共和国黑色冶金行业标准指标,产品钛渣各项指标均符合标准要求。根据当地硫酸法钛白粉生产厂家实际生产经验,产品钛渣中SiO2含量偏高。从密闭直流电弧炉生产实际出发,提出控制入炉物料成分、调整配料比、增加渣包风冷时间、减少筛分分级四项措施来优化产品酸溶渣的品质。     

直流电弧炉炼钢过程的冶金反应特点

讨论了直流电弧炉炼钢过程中直流供电带来的熔池内流体流动和渣／金界面反应的变化和特点,并与交流电弧炉炼钢进行了比较。     

大功率密闭直流电弧炉冶炼钛渣烟气净化工艺研究

根据国内引进的第一台30MW密闭直流电弧炉钛渣生产线的工艺流程,对采用云南省钛铁矿冶炼钛渣过程中产生的烟气进行了气体及烟尘的流量、含量、化学成分等分析。由于产生的烟气具有温度高、含尘量大(1.75%~9.60%)、SO2含量低、CO含量高的特点,选择烟气净化设备时,除了处理能力要符合生产要求,还需要考虑粉尘粒径和烟气温度这两个因素,以实现烟气回收利用的目的。经过研究,烟气净化工艺首先对烟气进行直接水冷使烟气降温,然后选用德国进口涤气机对烟气进行精处理,除尘效率可以达到99.983%。处理净化后的烟气,热值高,气体性质稳定,净化后可安全用于无烟煤/钛渣干燥及渣包/铁包的烘烤,实现节能减排的目标;烟尘可以回收利用。     

高钛渣直流电炉煤气干法冷却及净化系统设计要点

根据高钛渣直流电炉煤气特性,研发、选择适宜的煤气冷却、净化工艺,并设置煤气显热回收系统,以实现高效、高精度连续净化高钛渣直流电炉煤气的目标。     

再析直流-空心电极电炉熔炼钛渣的特性

以对照原有钛渣工艺为切入点，从直流一空心电极电炉熔炼所产生的熔池流动特性可以抑制碳热还原过程的碳(氮)化钛生成，和能够气化除杂等几个方面做了简要论述。并着重指出，这些熔炼特性对提高我国钛渣生产技术水平的重要意义。     

密闭直流电弧炉冶炼钛渣热量平衡研究

密闭直流电弧炉冶炼生产钛渣利用输入电能进行加热,在高温情况下,钛精矿中的FeO和TiO2发生还原反应.反应进行程度影响熔池内渣的粘度,进而影响炉壁挂渣层的厚度和排渣排铁的难易程度,故还原反应过程必须控制输入能量使DC炉系统达到热量平衡；输入能量过高会使熔池内的渣过热,挂渣层变薄,造成炉壁腐蚀；输入能量过低,会导致渣的粘度明显增大,造成排渣困难,并产生泡沫渣.根据理论计算,每冶炼1t钛精矿需要消耗约911.55kWh的能量,云南某公司加料速率为5t钛精矿/h,钛精矿碳热还原,理论上需要消耗约4557.734kWh的电耗.能量支出方面有物料带走的物理热、炉壁和炉顶冷却水热损失、炉底风冷热损失、电力设备热损失以及少量未预见热损失,钛精矿冶炼过程中,能量的输出和输入是基本相等的,热量处于平衡状态.     

新立公司8万t/a高钛渣项目

正新立公司8万t/a高钛渣项目是云南省级重点项目。项目引进具有当今世界先进水平的南非Bteman公司密闭式直流电炉熔炼高钛渣技术、德国德马格(Demag )大型密闭式直流电炉设备、ABB公司大功率整流电气设备、Theisen公司电炉烟气净化设备和Loesceh公司高钛渣碾磨分级设备,该项目由昆明有色冶金设计研究院股份公司承担设计工作,我公司在吸收     

低频冶炼技术在6300kVA半密闭式钛渣电炉上的应用

介绍了钛渣冶炼生产的特性及技术现状,针对工频及直流冶炼存在的缺点,引入低频冶炼技术的原理,并在6300kVA半密闭式钛渣电炉上应用。实践证明,低频冶炼技术特别适应于钛渣生产过程的冶炼特性,是钛冶炼行业的一项重大技术创新。     

硫酸氢铵焙烧高钛渣反应动力学

研究了硫酸氢铵焙烧高钛渣的反应动力学过程,考察钛渣粒度、硫酸氢铵与钛渣质量比和焙烧温度对反应速率的影响,并对反应机理进行分析,建立了反应动力学模型。结果表明:硫酸氢铵焙烧高钛渣提取二氧化钛的动力学过程符合收缩未反应核模型,反应速率受化学反应控制,并由阿罗尼乌斯方程得到焙烧反应的表观活化能为87.95 kJ/mol。     

Effects of Post-weld Heat Treatment on Microstructure,Mechanical Properties and the Role of Weld Reinforcement in 2219 Aluminum Alloy TIG-Welded Joints

In as-welded state, each region of 2219 aluminum alloy TIG-welded joint shows diff erent microstructure and microhardness due to the diff erent welding heat cycles and the resulting evolution of second phases. After the post-weld heat treatment, both the amount and the size of the eutectic structure or θ phases decreased. Correspondingly, both the Cu content in α-Al matrix and the microhardness increased to a similar level in each region of the joint, and the tensile strength of the entire joint was greatly improved. Post-weld heat treatment played the role of solid solution strengthening and aging strengthening. After the post-weld heat treatment, the weld performance became similar to other regions, but weld reinforcements lost their reinforcing eff ect on the weld and their existence was more of an adverse eff ect. The joint without weld reinforcements after the post-weld heat treatment had the optimal tensile properties, and the specimens randomly crack in the weld zone.     

The First Phase of the SRIF Industrialized Base in ＂West Area＂ Has Been Put into Operation

After nearly two years＇ tense construction, the first phase of industrialized base of Shenyang Research Institute of Foundry （SRIF）, located at the Tiexi Casting and Forging Industrial Park in the west of Tiexi District, has now been completed and formally put into operation.     

Thermodynamics Study on the Decomposition of Chromite with KOH

Institute of Process Engineering, Chinese Academy of Sciences, China, has proposed a method for oxidative leaching of chromite with potassium hydroxide. Understanding the mechanism of chromite decomposition, especially in the potassium hydroxide fusion, is important for the optimization of the operating parameters of the oxidative leaching process. A traditional thermodynamic method is proposed and the thermal decomposition and the reaction decomposition during the oxidative leaching of chromite with KOH and oxygen is discussed, which suggests that chromite is mainly destroyed by reactions with KOH and oxygen. Meanwhile, equilibrium of the main reactions of the above process was calculated at different temperatures and oxygen partial pressures. The stable zones of productions, namely, K2CrO4 and Fe2O3, increase with the decrease of temperature, which indicates that higher temperature is not beneficial to thermodynamic reactions. In addition, a comparison of the general alkali methods is carried out, and it is concluded that the KOH leaching process is thermodynamically superior to the conventional chromate production process.     

Influence of Heat Treatment on Damping Behaviour of the Magnesium Wrought Alloy AZ61

The effect of isochronal heat treatments for 1h on variation of damping, hardness and microstructural change of the magnesium wrought alloy AZ61 was investigated. Damping and hardness behaviour could be attributed to the evolution of precipitation process. The influence of precipitation on damping behaviour was explained in the framework of the dislocation string model of Granato and Lücke.     

Effect of Rare Earth Doping on Impedance,Modulus and Conductivity Properties of Multiferroic Composites:0.5(BiLa_xFe_(1-x)O_3)–0.5(PbTiO_3)

The Lanthanum-doped bismuth ferrite–lead titanate compositions of 0.5(Bi LaxFe1-xO3)–0.5(Pb Ti O3)(x = 0.05,0.10,0.15,0.20)(BLxF1-x-PT) were prepared by mixed oxide method.Structural characterization was performed by X-ray diffraction and shows a tetragonal structure at room temperature.The lattice parameter c/a ratio decreases with increasing of La(x = 0.05–0.20) concentration of the composites.The effect of charge carrier/ion hopping mechanism,conductivity,relaxation process and impedance parameters was studied using an impedance analyzer in a wide frequency range(102–106Hz) at different temperatures.The nature of Nyquist plot confirms the presence of bulk effects only,and non-Debye type of relaxation processes occurs in the composites.The electrical modulus exhibits an important role of the hopping mechanism in the electrical transport process of the materials.The ac conductivity and dc conductivity of the materials were studied,and the activation energy found to be 0.81,0.77,0.76 and 0.74 e V for all compositions of x = 0.05–0.20 at different temperatures(200–300 °C).     

Quantitative Analysis of the Crystallographic Orientation Relationship Between the Martensite and Austenite in Quenching–Partitioning–Tempering Steels

The orientation relationships(ORs)between the martensite and the retained austenite in low-and medium-carbon steels after quenching–partitioning–tempering process were studied in this work.The ORs in the studied steels are identified by selected-area electron diffraction(SAED)as either K–S or N–W ORs.Meanwhile,the ORs were also studied based on numerical fitting of electron backscatter diffraction data method suggested by Miyamoto.The simulated K–S and N–W ORs in the low-index directions generally do not well coincide with the experimental pole figure,which may be attributed to both the orientation spread from the ideal variant orientations and high symmetry of the low-index directions.However,the simulated results coincide well with experimental pole figures in the high-index directions{123}_(bcc).A modified method with simplicity based on Miyamoto’s work was proposed.The results indicate that the ORs determined by modified method are similar to those determined by Miyamoto’method,that is,the OR is near K–S OR for the low-carbon Q–P–T steel,and with the increase of carbon content,the OR is closer to N–W OR in medium-carbon Q–P–T steel.     

Using Finite Element and Contour Method to Evaluate Residual Stress in Thick Ti-6Al-4V Alloy Welded by Electron Beam Welding

This work was to reveal the residual stress profile in electron beam welded Ti-6Al-4V alloy plates(50 mm thick) by using finite element and contour measurement methods.A three-dimensional finite element model of 50-mmthick titanium component was proposed,in which a column–cone combined heat source model was used to simulate the temperature field and a thermo-elastic–plastic model to analyze residual stress in a weld joint based on ABAQUS software.Considering the uncertainty of welding simulation,the computation was calibrated by experimental data of contour measurement method.Both test and simulated results show that residual stresses on the surface and inside the weld zone are significantly different and present a narrow and large gradient feature in the weld joint.The peak tensile stress exceeds the yield strength of base materials inside weld,which are distinctly different from residual stress of the thin Ti-6Al-4V alloy plates presented in references before.     

Microstructures and Tensile Properties of Ultrafine-Grained Ni–(1–3.5) wt% SiC_(NP) Composites Prepared by a Powder Metallurgy Route

Silicon carbide nanoparticle-reinforced nickel-based composites(Ni–Si CNP),with a Si CNPcontent ranged from1 to 3.5 wt%,were prepared using mechanical alloying and spark plasma sintering.In addition,unreinforced pure nickel samples were also prepared for comparative purposes.To characterize the microstructural properties of both the unreinforced pure nickel and the Ni–Si CNPcomposites transmission electron microscopy(TEM) was used,while their mechanical behavior was investigated using the Vickers pyramid method for hardness measurements and a universal tensile testing machine for tensile tests.TEM results showed an array of dislocation lines decorated in the sintered pure nickel sample,whereas,for the Ni–Si CNPcomposites,the presence of nano-dispersed Si CNPand twinning crystals was observed.These homogeneously distributed Si CNPwere found located either within the matrix,between twins or on grain boundaries.For the Ni–Si CNPcomposites,coerced coarsening of the Si CNPassembly occurred with increasing Si CNPcontent.Furthermore,the grain sizes of the Ni–Si CNPcomposites were much finer than that of the unreinforced pure nickel,which was considered to be due to the composite ball milling process.In all cases,the Ni–Si CNPcomposites showed higher strengths and hardness values than the unreinforced pure nickel,likely due to a combination of dispersion strengthening(Orowan effects) and particle strengthening(Hall–Petch effects).For the Ni–Si CNPcomposites,the strength increased initially and then decreased as a function of Si CNPcontent,whereas their elongation percentages decreased linearly.Compared to all materials tested,the Ni–Si CNPcomposite containing 1.5% Si C was found more superior considering both their strength and plastic properties.     

Directional Growth of Tin Crystals Controlled by Combined Solute Concentration Gradient Field and Static Magnetic Field

A new method was introduced to achieve directional growth of Sn crystals. Microstructures in liquid(Pb)/liquid(Sn) diffusion couples were investigated under various static magnetic fields. Results show that the β-Sn crystals mainly reveal an irregular dendritic morphology without or with a relatively low static magnetic field(B0.3 T). When the magnetic field is increased to 0.5 T, the β-Sn dendrites close to the final stage of growth begin to show some directional character. With a further increase in the magnetic field to a higher level(0.8–5 T), the β-Sn dendrites have an enhanced directional growth character, but the dendrites show a certain deflection. As the magnetic field is increased to 12 T, the directional growth of the β-Sn dendrites in the center of the couple is severely destroyed. The mechanism of the directional growth of the β-Sn crystals and the deflection of the β-Sn crystals with the application of static magnetic field was tentatively discussed.     

电化学噪声数据处理方法概述

综述了常见的电化学噪声数据处理方法,介绍了直流趋势剔除、统计分析、快速傅立叶变换(FFT)法计算功率谱密度(PSD)以及小波变换处理电化学噪声信号的基本过程,并阐释了各种数学处理及所得参数的物理意义。