The cover image, by Zongxue Yu et al., is based on the Research Article A novel antifouling and antibacterial surfacefunctionalized PVDF ultrafiltration membrane via binding Ag/SiO2 nanocomposites, DOI: 10.1002/jctb.5034 .
The cover image, by Ying Pei et al., is based on the Research Article Tannin‐immobilized cellulose microspheres as effective adsorbents for removing cationic dye (Methylene Blue) from aqueous solution, DOI: 10.1002/jctb.5121 .
The cover image, by Ela Eroglu and Colin L Raston, is based on the Mini‐review Nanomaterial processing strategies in functional hybrid materials for wastewater treatment using algal biomass, DOI: 10.1002/jctb.5188 .
The cover image, by Wenxiang Zhang et al., is based on the Review A short review on the research progress in alfalfa leaf protein separation technology, DOI: 10.1002/jctb.5364 .
The cover image, by Estefanía Sierra et al., is based on the Research Article Chemoenzymatic synthesis of poly(phenylene disulfides) with insulating properties and resistant to high temperatures, DOI: 10.1002/jctb.5290 .
The cover image, by Marco Rito‐Palomares et al., is based on the Perspective Monolithic chromatography: insights and practical perspectives, DOI: 10.1002/jctb.5040 .
The cover image, by Manal Ali et al., is based on the Research Article Potential of using non‐inoculated self‐aerated immobilized biomass reactor for post‐treatment of upflow anaerobic staged reactor treating high strength industrial wastewater, DOI: 10.1002/jctb.5082 .
The cover image, by Aravindan Rajendran et al., is based on the Research Article Nutrient recovery from ethanol co‐products by a novel mycoalgae biofilm: attached cultures of symbiotic fungi and algae, DOI: 10.1002/jctb.5177 .
The cover image, by José Antonio Díaz et al., is based on the Research Article Kinetic modelling of the glycerol oxidation in the liquid phase: comparison of Pt, Au and Ag AS active phases, DOI: 10.1002/jctb.5296 . Photo Credit: CNRS Photothèque / Cyril FRESILLON.
The cover image, Sandeep Ramesh Hadpe et al., is based on the Research Article ATF for cell culture harvest clarification: mechanistic modelling and comparison with TFF, DOI: 10.1002/jctb.5165 .
The cover image, by Weirui Chen et al., is based on the Research Article Effective catalytic ozonation for oxalic acid degradation with bimetallic Fe‐Cu‐MCM‐41: operation parameters and mechanism, DOI: 10.1002/jctb.5304 .
When irradiating glasses with ultrashort laser pulses, the high cooling rates trigger a change in network structure and fictive temperature which can be studied by Raman spectroscopy. Cover figure (a) shows the Raman signature (D2 peak height) and the corresponding increase in fictive temperature as a function of the cross section of the laser induced modification. The largest fictive temperature is measured in the center of the modification decreasing outwards (as seen in cover figure 2(b)). For higher repetition rate of the laser pulses the larger fictive temperature indicates stronger heat accumulation from pulse to pulse.
Microstructures obtained after sintering of 0.1 mol% TiO2 excess BaTiO3 at 1250 °C for 50 h at different oxygen partial pressures, showing stagnant, abnormal, and normal grain growth. See the Feature Article, “Solid‐State Conversion of Single Crystals: the Principle and the State‐of‐the‐Art,” by Suk‐Joong L. Kang et al.
