Speciation of Cr(III) and Cr(VI) in environmental samples by solid phase extraction on Ambersorb 563 resin

A simple and sensitive method for the speciation, separation and preconcentration of Cr(VI) and Cr(III) in natural water, soil and sediment samples was developed. Cr(VI) has been separated from Cr(III) and preconcentrated as Cr(III)-diphenylcarbazone complex by using Ambersorb 563 resin and determined by spectrophotometric method at 540 nm. Effect of analytical parameters such as sulfuric acid concentration, ligand volume, type of elution solution, sample volume, amount of resin and foreign ions were investigated. The presented procedure was successfully applied for the chromium speciation in various environmental samples with successfully results.     

Sequential eluent injection technique as a new approach for the on-line enrichment and speciation of Cr(III) and Cr(VI) species on a single column with FAAS detection

This paper introduces a sequential eluent injection (SEI) technique combined with an on-line preconcentration/separation system for a fast and sensitive FAAS determination of trace amounts of Cr(III) and Cr(VI) species. The method is based on the simultaneous retention of Cr(III) and Cr(VI) on a single mini-column packed with a chloromethylated polystyrene functionalized with N,N-bis(naphthylideneimino)diethylenetriamine (PS-NAPdien) at pH 6.7. The retained chromium species was eluted by sequential injection of HCl for desorption of Cr(III), and NH₃ and NH₄NO₃ buffer solutions for desorption of Cr(VI). All the chemical and flow injection variables were optimized for the quantitative preconcentration and speciation of Cr(III) and Cr(VI). Under the optimum conditions, the calibration graph obtained is linear over the concentration range of 2.0-60.0 μg L⁻¹ for Cr(III), and 8.0-180.0 μg L⁻¹ for Cr(VI). The preconcentration factors for Cr(III) and Cr(VI) were 70 and 30, respectively. The 3σ detection limits were 0.6 μg L⁻¹ and 2.5 μg L⁻¹ for Cr(III) and Cr(VI), respectively. The relative standard deviations were 2.55% and 0.8%, respectively, for 6 replicate determinations of Cr(III) and Cr(VI) at the 40.0 μg L⁻¹ level. The proposed method was applied for determination of Cr(III) and Cr(VI) in different water samples with satisfactory results.     

Speciation determination of chromium(III) and (VI) using preconcentration cloud point extraction with flame atomic absorption spectrometry (FAAS)

bis-[2-Hydroxy-1-naphthaldehyde] thiourea was synthesized and preconcentration cloud point extraction (CPE) for speciation determination of chromium(III) and (VI) in various environmental samples with flame atomic absorption spectrometry (FAAS) has been developed. Chromium(III) complexes with bis-[2-hydroxynaphthaldehyde] thiourea is subsequently entrapped in the surfactant micelles. After complexation of chromium(III) with reagent, the analyte was quantitatively extracted to the surfactant-rich phase in the non-ionic surfactant Triton X-100 after centrifugation. The effect of pH, concentration of chelating agent, surfactant, equilibration temperature and time on CPE was studied. The relative standard deviation was 2.13% and the limits of detection were around 0.18 μg L⁻¹.     

Simultaneous separation and speciation of inorganic As(III)/As(V) and Cr(III)/Cr(VI) in natural waters utilizing capillary microextraction on ordered mesoporous Al2O3 prior to their on-line determination by ICP-MS

In this paper, a system of flow injection (FI) capillary microextraction (CME) on line coupled with inductively plasma mass spectrometry (ICP-MS) was proposed for simultaneous separation and speciation of inorganic As(III)/As(V) and Cr(III)/Cr(VI) in natural waters. Ordered mesoporous Al2O3 coating was prepared by sol-gel technology and used as CME coating material. Various experimental parameters affecting the capillary microextraction of inorganic arsenic and chromium species have been investigated and optimized. Under the optimized conditions, the limits of detection were 0.7 and 18 ng L(-1) for As(V) and Cr(VI), 3.4 and 74 ng L(-1) for As(III) and Cr(III), respectively, with an enrichment factor of 5 and a sampling frequency of 8h(-1). The relative standard deviations (R.S.D.) were 3.1, 4.0, 2.8 and 3.9% (C=1 ng mL(-1), n=7) for As(V), As(III), Cr(VI) and Cr(III), respectively. The proposed method was successfully applied for the analysis of inorganic arsenic and chromium species in mineral water, tap water and lake water with the recovery of 94-105%. In order to verify the accuracy of the method, two certified reference of GSBZ50027-94 and GSBZ50004-88 water samples were analyzed and the results obtained were in good agreement with the certified values. The ordered mesoporous Al2O3 coated capillary showed an excellent solvent and thermal stability and could be re-used for more than 30 times without decreasing extraction efficiency.     

3-Ethyl-4-(p-chlorobenzylidenamino-4,5-dihydro-1H-1,2,4-triazol-5-one (EPHBAT) as precipitant for carrier element free coprecipitation and speciation of chromium(III) and chromium(VI)

A method for the separation and speciative determination of Cr(VI) and Cr(III) has been developed. The procedure is based on coprecipitation of Cr(III) on 3-ethyl-4-(p-chlorobenzylidenamino-4,5-dihydro-1H-1,2,4-triazol-5-one (EPHBAT) without carrier element. The Cr(III) can be selectively precipitated on EPHBAT in the pH range of 8.0–9.0, while Cr(VI) cannot be retained. Total chromium was determined after the reduction of Cr(VI) to Cr(III) with 0.5 mL of concentrated H₂SO₄ and 0.5 mL of ethanol. Cr(VI) concentrations were obtained as the respective differences between total chromium and Cr(III). Experiments were performed to optimize conditions, such as pH, amounts of EPHBAT, sample volume, etc. A preconcentration factor of 50-fold was achieved for Cr(III). The detection limit of the method for Cr(III) was 1.0 μg L⁻¹. To validate the developed method, the certified reference materials (NIST SRM 1573a and GBW 0703) were analyzed. The method was applied for the speciation of chromium in spiked natural water samples with satisfactory results.     

Preparation and characterization of Ti/SnO(2)-Sb(2)O(3)-Nb(2)O(5)/PbO(2) thin film as electrode material for the degradation of phenol

In this work, a novel electrode of titanium substrate coated with mixed metal oxides of SnO(2), Sb(2)O(3), Nb(2)O(5) and PbO(2) was successfully prepared using thermal decomposition and electrodeposition. The surface morphology and the structure of the prepared thin film were characterized by scanning electronic microscopy (SEM) and X-ray diffraction (XRD), respectively. Experimental results showed that the structure of the prepared electrode might be described as a Ti/SnO(2)-Sb(2)O(3)-Nb(2)O(5)/PbO(2) thin film and its surface was mainly comprised pyramidal-shape beta-PbO(2) crystals. The modified electrode had higher oxygen evolution potential than that of other PbO(2) modified electrodes. Electrocatalytic oxidation of phenol in aqueous solution was studied to evaluate the potential applications of this electrode in environmental science. The phenol removal efficiency in an artificial wastewater containing 0.50g/L phenol could reach 78.6% at 20 degrees C and pH 7.0 with an applied electricity density of 20mA/cm(2) and treatment time of 120min. When 21.3g/L chloride was added to this wastewater, the removal efficiency could reach to 97.2%.     

Determination of trace lead in water samples by graphite furnace atomic absorption spectrometry after preconcentration with nanometer titanium dioxide immobilized on silica gel

Nanometer titanium dioxide immobilized on silica gel (immobilized nanometer TiO2) was prepared by sol-gel method and characterized using X-ray diffraction (XRD) and scanning electron microscope (SEM). The adsorptive capability of immobilized nanometer TiO2 for lead was assessed in this work using column method. It was found that lead can be quantitatively retained by immobilized nanometer TiO2 in the pH range 4-7, then eluted completely with 1.0molL(-1) HCl. The adsorption capacity of immobilized nanometer TiO2 for Pb was found to be 3.16mgg(-1). A new method has been developed for the determination of trace lead based on preconcentration with a microcolumn packed with immobilized nanometer TiO2 prior to its determination by graphite furnace atomic absorption spectrometry (GFAAS). The detection limit of this method for Pb was 9.5ngL(-1) with an enrichment factor of 50, and the relative standard deviations (R.S.D.s) was 3.2% at the 10ngmL(-1) Pb level. The method was validated using a certified reference material, and was applied for the determination of trace lead in water samples.     

Solid-phase extraction of Fe(III), Pb(II) and Cr(III) in environmental samples on amberlite XAD-7 and their determinations by flame atomic absorption spectrometry

This paper describes a simple and accurate procedure for preconcentration of trace amounts of Fe(III), Pb(II) and Cr(III) ions. The preconcentration procedure is based on retention of p-xylenol blue chelates on Amberlite XAD-7. The analytes retained were eluted from Amberlite XAD-7 by using 1 mol L(-1) HCl. The influences of the analytical parameters including amounts of reagents, pH and type of eluent were also investigated. The detection limits of Fe, Pb and Cr were found to be 3.07, 18.6 and 3.27 microg L(-1), respectively. The accuracy of the procedure was checked by the analysis of an electrolytic copper wire sample. The relative error was less than 5%. The presented method was applied to the determination of Fe(III), Pb(II) and Cr(III) in water samples from Denizli, Turkey with good results such as recoveries more than 95%, relative standard deviations below 10%.     

Simultaneous preconcentration of Co(II), Ni(II), Cu(II), and Cd(II) from environmental samples on Amberlite XAD-2000 column and determination by FAAS

A new method for the preconcentration of some trace metals (Co, Ni, Cu, and Cd) as complexed with ammonium pyrrolidynedithiocarbamate (APDC) was developed using a mini-column filled with Amberlite XAD-2000 resin. Metal contents were determined by flame atomic absorption spectrometry (FAAS) after the metal complexes accumulated on the resin were eluted with 1M HNO(3) in acetone. The effects of the analytical parameters such as sample pH, quantity of complexing agent, eluent type, resin quantity, sample volume, sample flow rate, and matrix ions were investigated on the recovery of the metals from aqueous solutions. The relative standard deviation (R.S.D.) of the method was <6%. The validation of the method was confirmed using two certified reference materials (CRM TMDW-500 Drinking Water and CRM SA-C Sandy Soil C). The method was successfully applied to some stream waters and mushroom samples from Eastern Black Sea Region (Trabzon city) of Turkey.     

Characterization of arsenic (V) and arsenic (III) in water samples using ammonium molybdate and estimation by graphite furnace atomic absorption spectroscopy

Arsenic (V) is known to form heteropolyacid with ammonium molybdate in acidic aqueous solutions, which can be quantitatively extracted into certain organic solvents. In the present work, 12-molybdoarsenic acid extracted in butan-1-ol is used for quantification of As (V). Total arsenic is estimated by converting arsenic (III) to arsenic (V) by digesting samples with concentrated nitric acid before extraction. Concentration of As (III) in the sample solutions could be calculated by the difference in total arsenic and arsenic (V). The characterization of arsenic was carried out by GFAAS using Pd as modifier. Optimization of the experimental conditions and instrumental parameters was investigated in detail. Recoveries of (90-110%) were obtained in the spiked samples. The detection limit was 0.2 microg l(-1). The proposed method was successfully applied for the determination of trace amount of arsenic (III) and arsenic (V) in process water samples.     

Study on solid-phase extraction and flame atomic absorption spectrometry for the selective determination of cadmium in water and plant samples with modified clinoptilolite

A sensitive, simple separation and solid-phase procedure, which is sorption and desorption of cadmium on modified clinoptilolite zeolite (with surfactant and neothorine), for preconcentration of cadmium prior to analysis by FAAS is described. The sorbent has exhibited good sorption potential for cadmium at pH 5. Cadmium was eluted from the column by nitric acid which resulted in preconcentration factor of 160. Thermodynamic behaviors for the process are investigated and adsorption process is interpreted in term of Freundlich equation. A detection limit of 0.015 ng mL⁻¹ was obtained and it is shown that calibration curve is linear from 0.01 to 4.0 μg mL⁻¹ in the final solution. Furthermore, the effects of various parameters such as pH, flow rate of the sample and eluent solution were studied. This method was successfully applied for determination of cadmium in various plant and real water samples.     

The effect of Sb2O5 additions on the dielectric properties of Ag(Nb0.8Ta0.2)O3 ceramics

The sintering behavior and dielectric properties for perovskite Ag(Nb_0.8Ta_0.2)O₃ ceramic with Sb₂O₅ doping was explored. A small amount of Sb₂O₅ (2.5 wt.%) led to high densification at temperatures < 1060 °C. The dielectric constant increased and the temperature coefficient decreased with increasing concentration of Sb₂O₅, and the dielectric constant reached 673, combined with a low temperature coefficient of 147 ppm/°C, and dielectric loss of 0.0044 (at 1 MHz) for the sample with 3.5 wt.% Sb₂O₅ sintered at 1080 °C.     

A novel solid phase extraction procedure on Amberlite XAD-1180 for speciation of Cr(III), Cr(VI) and total chromium in environmental and pharmaceutical samples

Due to the toxicity of chromium, species depend on their chemical properties and bioavailabilities, speciation of chromium is very important in environmental samples. A speciation procedure for chromium(III), chromium(VI) and total chromium in environmental samples is presented in this work, prior to flame atomic absorption spectrometric determination of chromium. The procedure is based on the adsorption of Cr(III)-diphenylcarbazone complex on Amberlite XAD-1180 resin. After oxidation of Cr(III), the developed solid phase extraction system was applied to determinate the total chromium. Cr(III) was calculated as the difference between the total Cr content and the Cr(VI) content. The analytical conditions for the quantitative recoveries of Cr(VI) on Amberlite XAD-1180 resin were investigated. The effects of some alkaline, earth alkaline, metal ions and also some anions were also examined. Preconcentration factor was found to be 75. The detection limits (LOD) based on three times sigma of the blank (N: 21) for Cr(VI) and total chromium were 7.7 and 8.6 microg/L, respectively. Satisfactory results for the analysis of total chromium in the stream sediment (GBW7310) certified reference material for the validation of the presented method was obtained. The procedure was applied to food, water and pharmaceutical samples successfully.     

Preparation, characterization and photocatalytic activity of manganese doped TiO(2) immobilized on silica gel

A series of Mn-TiO(2)/SiO(2) (silica gel loaded with manganese doped TiO(2)) photocatalysts have been prepared by sol-gel method, and characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS). Photocatalytic activities were enhanced in photocatalytic degradation of methyl orange over Mn-TiO(2)/SiO(2). XPS analysis shows that a Ti-O-Si or Ti-O-Mn bond is formed on the surface of photocatalyst. Mn is doped as a mixture of Mn(2+) and Mn(3+) on the surface of 1.0mol% Mn-TiO(2)/SiO(2). Mn(3+) appears to trap electrons and prohibit the electron-hole recombination. The electrons trapped in Mn(3+) site are subsequently transferred to the adsorbed O(2). As a result, the combination of the electron-hole pair was reduced.     

Surface modification of the (Y,Gd)BO3:Eu phosphor by dual-coating of oxide nano-particles

The surface of (Y,Gd)BO₃:Eu³⁺ phosphor, red-emitting source in the plasma display panel (PDP), was dual-coated with SiO₂ and Al₂O₃ nano-particles. The surface modification of the phosphor was performed by a modified sol-gel method using the colloidal alumina and silica as surface coating precursors. We observed the oxide nano-particles on the surface of the single coated and the dual-coated phosphors and it was found that the luminance intensity was increased in the photoluminescence (PL) by a suppression of the nonradiative recombination via surface defects. The experimental results suggest that the surface modification of phosphors with nano-particles of the oxides leads to an increase in the luminance intensity of phosphors in the PDP (plasma display panel) and the gas discharge lamps.     

Matrix effect on local structure surrounding Yb3+and spontaneous emission probability in oxide glasses

Extended X-ray absorption fine structure measurements have been performed on Yb³⁺ in silicate, borate, phosphate, and gallate glasses in order to investigate the local structures surrounding Yb³⁺. The local structures of Yb³⁺ ions in silicate, borate, and phosphate glasses were similar to those of Er³⁺ ions. Yb³⁺ ions do not occupy the network structural sites, but sit around the terminal region of the network or the region between the networks in these glasses. On the other hand, Yb³⁺ ions substitute the Ga³⁺ sites in complex anion structural units of the K₂O-Ga₂O₃-Nb₂O₅ glasses. We classified the local structures surrounding Yb³⁺ ions in oxide glasses into two types: the former and the latter are interstitial and substitutive types, respectively. The relationship between the spontaneous emission probability for ²F_5/2 – ²F_7/2 transition of Yb³⁺ and the local structure of Yb³⁺ in oxide glasses are discussed in terms of these two types.     

Preparation and characterization of NaSm9(SiO4)6O2 powders with infrared absorptive properties

NaSm₉(SiO₄)₆O₂ powders were synthesized by mild hydrothermal method at 180 °C for 24 h. The infrared optical properties and structure of the obtained powders were characterized. There existed two narrow and sharp absorptive bands near 943 cm^− 1 (10.6 μm). The band at 938 cm^− 1 was assigned to the stretching vibrations of SiOSm groups connecting to Q¹ species and the band at 989 cm^− 1 was attributed to the stretching vibrations of SiOSm groups linking with Q⁰ species. The reflectivity was lower than 1% from 900 to 1200 nm and reached the minimum of 0.46% at 1073 nm. The prepared powders exhibit potential to act as a new kind of absorptive material for the infrared light of 10.6 μm and 1.06 μm.     

Distribution of pyrochlore phase in Pb(Mg1/3Nb2/3)O3-PbTiO3 films and suppression with a Pb(Zr0.52Ti0.48)O3 interfacial layer

Thin films of the relaxor ferroelectric Pb(Mg_1/3Nb_2/3)O₃-PbTiO₃ (PMN-PT) on Pt/Ti/SiO₂/Si (Pt/Si) substrates both with and without a Pb(Zr_0.52Ti_0.48)O₃ (PZT) interfacial layer were investigated. Perovskite and pyrochlore coexistence was observed for PMN-PT thin films without a PZT interfacial layer. Interestingly, most of the pyrochlore phase was observed in single-coated films and in the first layer of multi-coated films. The pyrochlore phase exhibited grains with an average size of about 25 nm, which is smaller than those of the perovskite phase (about 90 nm). In contrast, for PMN-PT thin films grown on a PZT interfacial layer, the formation of a pyrochlore phase at the interface between PMN-PT layers and the substrate is completely suppressed. Moreover, small grains are not observed in the films with a PZT interfacial layer. The measured polarization-electric field (P-E) hysteresis loops of PMN-PT films with and without PZT layers indicate that enhanced electrical properties can be obtained when a PZT interfacial layer is used. These enhanced properties include an increase in the value of remanent polarization P_r from 2.7 to 5.8 μC/cm² and a decrease in the coercive field E_c from 60.5 to 28.0 kV/cm.     

Initial growth stage of InTaO4 films deposited on MgO(0 0 1) substrates together with assisting O2-ion-beam by Ar-ion-beam sputtering of Ta target partly covered with In sheets

Thin-film growth process of InTaO₄ on MgO substrates held at 700 °C is analyzed on the basis of the thickness dependence of the structure determined by X-ray diffraction analysis and the composition determined by X-ray photoemission spectroscopy. Monoclinic InTaO₄ thin film grows at thicknesses above a critical value, while the amorphous phase grows at thicknesses below the critical thickness because the amount of In becomes insufficient to form the respective monoclinic structure. The In atoms are re-evaporated from the MgO surface at the initial growth stage. The growing films possibly comprise amorphous TaO_x. The In atoms start to be incorporated into the growing films due to the reduction of re-evaporation of In atoms. This leads to the start of the interaction with Ta and O atoms resulting in the formation of InTaO₄. The critical thickness to form a crystalline InTaO₄ film is controlled by adjusting the incoming flux of In atoms.     

Application of accelerated carbonation with a combination of Na2CO3 and CO2 in cement-based solidification/stabilization of heavy metal-bearing sediment

The efficient remediation of heavy metal-bearing sediment has been one of top priorities of ecosystem protection. Cement-based solidification/stabilization (s/s) is an option for reducing the mobility of heavy metals in the sediment and the subsequent hazard for human beings and animals. This work uses sodium carbonate as an internal carbon source of accelerated carbonation and gaseous CO₂ as an external carbon source to overcome deleterious effects of heavy metals on strength development and improve the effectiveness of s/s of heavy metal-bearing sediment. In addition to the compressive strength and porosity measurements, leaching tests followed the Chinese solid waste extraction procedure for leaching toxicity – sulfuric acid and nitric acid method (HJ/T299-2007), German leaching procedure (DIN38414-S4) and US toxicity characteristic leaching procedures (TCLP) have been conducted. The experimental results indicated that the solidified sediment by accelerated carbonation was capable of reaching all performance criteria for the disposal at a Portland cement dosage of 10 wt.% and a solid/water ratio of 1:1. The concentrations of mercury and other heavy metals in the leachates were below 0.10 mg/L and 5 mg/L, respectively, complying with Chinese regulatory level (GB5085-2007). Compared to the hydration, accelerated carbonation improved the compressive strength of the solidified sediment by more than 100% and reduced leaching concentrations of heavy metals significantly. It is considered that accelerated carbonation technology with a combination of Na₂CO₃ and CO₂ may practically apply to cement-based s/s of heavy metal-bearing sediment.