Determination of polycyclic aromatic sulfur heterocycles in fossil fuel-related samples

An analytical method is described for the separation, identification, and quantification of a number of polycyclic aromatic sulfur heterocycles (PASHs) in three fossil fuel-related samples including two Standard Reference Materials (SRMs), SRM 1597 (coal tar) and SRM 1582 (petroleum crude oil), and a decant oil. The compounds measured include the 3 possible naphtho[b]thiophenes; dibenzothiophene and selected methyl-, ethyl-, dimethyl-, and trimethyl-substituted isomers; the 3 possible benzo[b]naphthothiophenes; and the 30 methylbenzo[b]naphthothiophenes isomers. Because of the occurrence of polycyclic aromatic hydrocarbons and PASHs together with their large number of possible alkyl-substituted isomers, the analytical method described requires a number of prerequisites: effective sample cleanup, selective stationary phases, and selective methods of detection. The sample cleanup involves solid-phase extraction using aminopropylsilane cartridges with different solvent mixtures followed by normal-phase liquid chromatographic isolation of the PASHs based on the number of aromatic carbons. These aromatic ring fractions are then separated by capillary gas chromatography using two stationary phases with different selectivities, 5% phenyl-substituted methylpolysiloxane stationary phase and 50% phenyl-substituted methylpolysiloxane stationary phase, and analyzed with mass-selective detection and atomic emission detection. A liquid crystalline stationary phase was also used to separate the methylbenzo[b]naphthothiophene isomers in the crude oil sample. Advantages and limitations of each chromatographic and detection technique are discussed.     

Picogram quantitation of polycyclic aromatic hydrocarbons adsorbed on aerosol particles by two-step laser mass spectrometry

Polycyclic aromatic hydrocarbons (PAHs) are emitted into the atmosphere mostly by anthropogenic combustion sources. Because of their carcinogenic and mutagenic properties, PAHs are often analyzed in air quality measurements. Atmospheric concentrations of PAHs, typically in the nanograms-per-cubic-meter range, require significant effort for sample collection and processing when conventional methods such as gas chromatography/mass spectrometry (GC/MS) or liquid chromatography/mass spectrometry are used. In contrast, two-step laser mass spectrometry (L2MS) is highly sensitive and selective for PAHs and requires almost no sample preparation. Here, we present for the first time a method based on L2MS to quantify PAHs adsorbed on aerosol particles collected on a filter. Linear ranges for quantitation were determined for five different PAHs in the mass range of 178-276 Da (i.e., phenanthrene, pyrene, chrysene, benzo[e]pyrene, benzo[ghi]perylene) covering more than 2 orders of magnitude with detection limits between 50 and 300 pg of a single PAH on a whole filter sample. A quantitative comparison with GC/MS was performed using model aerosols consisting of benzo[e]pyrene adsorbed on inorganic salt aerosol particles. On average, 25% less benzo[e]pyrene was determined with GC/MS than with L2MS, with a variability between the two methods of +/-68%. The general lower amount measured with GC/MS is attributed to losses during the sample preparation for the GC/MS measurements.     

Comparison of isotope dilution mass spectrometry methods for the determination of total homocysteine in plasma and serum

Two independent methods have been critically evaluated and applied to the measurement of total homocysteine in serum and plasma: solid-phase anion extraction (SPAE) gas chromatography/mass spectrometry (GC/MS) and protein precipitation liquid chromatography/tandem mass spectrometry (LC/MS/MS). In addition, analysis of samples prepared by SPAE was accomplished by liquid chromatography/mass spectrometry (LC/MS) and LC/MS/MS. These methods have been used to determine total homocysteine levels in several existing serum-based Standard Reference Materials (SRMs) from the National Institute of Standards and Technology and in patient plasma samples provided by the Centers for Disease Control and Prevention. The precision of the homocysteine measurements in serum and plasma was critically evaluated, and method comparisons were carried out using Bland-Altman plots and bias analysis. On the basis of the excellent precision and close agreement of the mass spectrometric (MS) methods, the MS-based methods will be used for certification of a serum-based SRM for homocysteine and folates.     

Summarizing the effectiveness of supercritical fluid extraction of polycyclic aromatic hydrocarbons from natural matrix environmental samples

A summary of the supercritical fluid extraction (SFE) of polycyclic aromatic hydrocarbons (PAHs) from four natural matrix Standard Reference Materials (SRMs) is presented. The work involved the investigation of the effects of extraction fluid [carbon dioxide (CO(2)), chlorodifluoromethane (R22), and 1,1,1,2-tetrafluoroethane (HFC134a)], fluid modifier (dichloromethane and aniline), temperature (60, 150, and 200 °C) and added water on the SFE recoveries of PAHs compared to certified results from Soxhlet extractions. For SRM 1649a (Urban Dust/Organics), R22 yielded excellent recoveries (>90% of certified concentrations) of all PAHs measured, while results for the same SRM using HFC134a as the fluid were typically <80% of the certified concentrations for most of the PAHs measured. For SRM 1941a and 1944, both aquatic sediments with similar physical and chemical compositions, extractions of the wet materials with dichloromethane-modified CO(2) (10%, v/v) yielded quantitative recoveries of all PAHs for SRM 1944 but an obvious trend of lower recoveries for higher molecular weight PAHs (≥228 amu) for SRM 1941a. Results of SFEs of SRM 1650 (Diesel Particulate Matter) showed that this material is the most refractory of the SRMs investigated in this study, with recoveries of indeno[1,2,3-cd]pyrene and benzo[ghi]perylene at <20% of the Soxhlet results.     

Interlaboratory comparison of HPLC-fluorescence detection and GC/MS: analysis of PAH compounds present in diesel exhaust

For laboratories involved in polycyclic aromatic hydrocarbon (PAH) analyses in environmental samples, it is very useful to participate in interlaboratory comparison studies which provide a mechanism for comparing analytical methods. This is particularly important when PAH analyses are routinely done using a single technique. The results are reported for such an interlaboratory comparison study, in which the four selected participating laboratories quantitatively analyzed several PAH compounds in diesel exhaust samples. The samples included particle and vapor phase extracts collected and prepared at Michigan Technological University (MTU PE and MTU VE, respectively), a diesel particle extract prepared by the National Institute for Standards and Technology (NIST, SRM 1975), and a fully characterized diesel particle sample (NIST SRM 1650). One of the laboratories used only HPLC-FLD, one used only GC/MS and two laboratories used both methods for the routine analysis of PAH in environmental samples.Data were obtained for five PAH compounds: fluoranthene, pyrene, benz[a]anthracene, benzo[a]pyrene, and benzo[g, h,i]perylene. The mean PAH levels found for SRM 1650 were outside the range reported by NIST. The range in the reported means was from 24% lower than certified for benz[a]anthracene to 41% higher for benzo[g,h,i]perylene.For the previously uncharacterized samples in this study (SRM 1975, MTU PE and MTU VE), two-thirds of the reported results were higher for the HPLC-FLD method than for the GC/MS. The range in differences between methods was from-54 to+31% calculated as the difference in GC/MS value relative to the HPLC value for each of the compared compounds.Coefficients of variation for the uncharacterized samples appeared to be higher, in most (but not all) cases, for the HPLC-FLD than for the GC/MS. The resolution of certain PAH isomers (e.g. benz[a]anthracene and chrysene, or the benzofluoranthenes), was better, as expected, for HPLC than for GC. Generally lower detection limits (by an order of magnitude or more) were reported for GC/MS than for HPLC-FLD. On the basis of this limited study, it seems as though significant differences may exist between laboratories, if not between methods, in the analysis of certain PAH compounds in real diesel samples by HPLC-FLD compared to GC/MS. If possible, measurements should be made using both methods. This is particularly important where potential interferences are undefined or subject to change, as is frequently the case with real environmental samples.     

Standard Reference Materials (SRMs) for the Calibration and Validation of Analytical Methods for PCBs (as Aroclor Mixtures)

Six Standard Reference Materials (SRMs®) have been prepared by the National Institute of Standards and Technology (NIST) for the determination of PCBs as different Aroclor mixtures in methanol. Six additional SRMs of the same Aroclors in transformer oil have also been prepared. Specifically, solutions of Aroclors 1016, 1232, 1242, 1254, and 1260 have been gravimetrically prepared (individually) in methanol and transformer oil, mixed, and transferred to amber glass ampoules in approximately 1.2 mL aliquots. Gas chromatography with electron capture detection (GC-ECD) has been used to verify the gravimetric data for each solution and transformer oil SRM. Liquid chromatography was used for the isolation of the Aroclors from the transformer oil SRMs prior to GC-ECD analysis. Separate calibration solutions and oils were prepared with Aroclor levels similar to those in each methanol solution and transformer oil SRM and were processed alongside the samples. The GC-ECD response of each Aroclor was monitored relative to internal standards that were added to the complex mixtures for quantification. The gravimetric concentrations of Aroclors 1242 and 1254 in methanol were also examined by the same method of analysis (GC-ECD) using several different sources of Aroclors and two different capillary GC columns: a 5 % phenyl methylpolysiloxane phase and a relatively non-polar phase. The preparation of the materials, the gas chromatographic results, and the certified concentration values for each Aroclor SRM are described in this paper.     

Determination of [3H]-2,3,7,8-tetrachlorodibenzo-p-dioxin in human feces to ascertain its relative metabolism in man

Human feces samples from a self-dosing experiment were analyzed by gas chromatography/mass spectrometry (GC/MS) for [3H]-2,3,7,8-tetrachlorodibenzo-p-dioxin (3H-2378-TCDD) to determine that 36-44% of the radioactivity was attributable to the parent compound. This method, using isotope dilution analysis, proved to be difficult due to the unexpectedly higher native 2378-TCDD background which created abnormally large precision ranges around the calculated feces concentrations of 0.1-0.2 pg/g. These results were supported by additional analyses involving the GC/MS chemical cleanup method combined with liquid scintillation counting which showed that at most, 50% of the radioactivity was due to 2378-TCDD metabolites resulting in a minimum metabolism of 50% for these samples.     

Poly(ethylene-co-acrylic acid) stationary phases for the separation of shape-constrained isomers

A new approach for the synthesis of long alkyl chain length stationary phases for use in reversed-phase liquid chromatography is described. Poly(ethylene-co-acrylic acid) copolymers (i.e., (-CH2CH2-)x[CH2CH(CO2H)-]y) with different levels of acrylic acid were covalently bonded to silica via glycidoxypropyl or aminopropyl linkages. 13C cross polarization magic angle spinning (CP/MAS) nuclear magnetic resonance (NMR) spectroscopy was used to characterize the new reversed-phase materials. Aspects of shape selectivity were evaluated for six different columns with Standard Reference Material (SRM) 869a, Column Selectivity Test Mixture for Liquid Chromatography. Selectivity for isomer separations was enhanced for stationary phases prepared with poly(ethylene-co-acrylic acid) containing a mass fraction of 5% acrylic acid. The relationship between alkyl conformation and chromatographic properties was studied by 13C magic angle spinning (MAS) NMR measurements, and correlations were made with the composition of the polymer. Finally, the effectiveness of this phase is demonstrated by the separation of several beta-carotene isomers.     

Preparation and certification of standard reference material 1507: 11-nor-delta 9-tetrahydrocannabinol-9-carboxylic acid in freeze-dried urine

The National Institute of Standards and Technology (NIST) has prepared and certified SRM 1507, a freeze-dried urine fortified with 11-nor-delta 9-tetrahydrocannabinol-9-carboxylic acid (THC-9-COOH), the major urinary metabolite of marijuana. The certified concentration of 20 +/- 1 ng/mL for the analyte was obtained from the concordant results of analyses of the material by gas chromatography/mass spectrometry (GC/MS) and high-performance liquid chromatography with electrochemical detection (HPLC-EC). Solid-phase extraction was used to prepare the sample for GC/MS analyses, and liquid-liquid extraction was used for the HPLC-EC analyses. The multistep HPLC method was developed at NIST to circumvent interferences from urinary constituents. The results of a round robin test on this material among five Department of Defense laboratories involved in drug testing are reported.     

Comprehensive two-dimensional gas chromatography and chemometrics for the high-speed quantitative analysis of aromatic isomers in a jet fuel using the standard addition method and an objective retention time alignment algorithm

A high-speed quantitative analysis of aromatic isomers in a jet fuel sample is performed using comprehensive two-dimensional gas chromatography (GC x GC) and chemometrics. A GC x GC separation time of 2.8 min is achieved for three aromatic isomers in jet fuel, which is 5 times faster than a reference method in which a singlecolumn separation resolves two of the three isomers of interest. The high-speed GC x GC separation is more than 10 times faster than a recent GC x GC separation that fully resolves the three components of interest in gasoline. The high-speed GC x GC analysis of jet fuel is accomplished through short GC columns, high gas velocities, and partial chromatographic peak resolution followed by chemometric resolution of overlapped peaks. The standard addition method and an objective retention time alignment algorithm are used to correct for retention time variations prior to the chemometric data analysis. The standard addition method corrects for chemical matrix effects that cause analytes in complex samples to have peak shapes, widths, and retention times that differ considerably from those of calibration standards in pure solvents. The retention time alignment algorithm corrects for the relatively small retention time variations caused by fluctuating instrumental parameters such as flow rate and temperature. The use of data point interpolation in the retention time alignment algorithm results in a more accurate retention time correction then previously achieved. The generalized rank annihilation method (GRAM) is the chemometric technique used to resolve the overlapped GC x GC peaks. The correction of retention time variations allows for successful GRAM signal deconvolution. Using the retention time alignment algorithm, GRAM quantification accuracy and precision are improved by a factor of 4. The methodology used in this paper should be applicable to other comprehensive separation methods, such as two-dimensional liquid chromatography, liquid chromatography coupled with capillary electrophoresis, and liquid chromatography coupled with gas chromatography.     

System response matrix calculation using symmetries for dual‐head PET scanners

Positron emission tomography (PET) scanner with dual‐head geometry offers better spatial resolution and higher sensitivity for dedicated application when compared with conventional full‐ring PET scanners. However, this configuration suffers from limited‐angle projection and depth‐of‐interaction (DOI) effects. Accurate modeling of the system response matrix (SRM) and its incorporation into iterative methods can help to obtain images with better quality. In this paper, we proposed a line‐of‐response (LOR) based symmetry approach to calculate the SRM of PET scanners with dual‐head geometry. Both Monte Carlo (MC) and analytically computed SRMs were obtained and named MC SRM and geometrical SRM respectively, with their performances been compared using simulated phantom studies. The point source study shows that the resolution in directions parallel to the detector is rather uniform, with a full width at half maximum (FWHM) of 0.6～0.7 mm and 0.6～0.8 mm using MC and geometrical SRMs respectively. While the spatial resolution in the direction perpendicular to the detector is much worse, when moving towards the detector panel from the field‐of‐view (FOV) center, the FWHM changes from 1.5 mm to 1.8 mm and 2.4 mm to 3.1 mm using MC and geometrical SRMs, which is caused by the missing of projection views. Images generated using MC SRM also show better stochastic quality and quantitative performance. © 2013 Wiley Periodicals, Inc. Int J Imaging Syst Technol, 23, 205–214, 2013     

A Monte Carlo model for studying the microheterogeneity of trace elements in reference materials by means of synchrotron microscopic X-ray fluorescence

Synchrotron micro-XRF, a trace-level microanalytical method, allows quantitative study of the nature and degree of heterogeneity of inorganic trace constituents in solid materials with a homogeneous matrix. In this work, the standard reference materials NIST SRM 613, Trace Elements in 1 mm Glass Wafers, and NIST SRM 1577a, Trace Elements in Bovine Liver, are examined at the 10100-ng mass level using X-ray beams of 5-150 microm in diameter. A procedure based on a large number of repeated analyses of small absolute amounts of the SRMs allows calculation of the minimal representative mass of the standard. The microheterogeneity of both NIST SRM 613 and NIST SRM 1577a was investigated with the aim of evaluating their suitability as reference materials for trace-level microanalytical techniques. A Monte Carlo simulation model was constructed for both homogeneous and heterogeneous materials to elucidate the dependence of the calculated minimal representative mass on the total analyzed mass in the case of materials that showstrongly heterogeneous features at the microscopic level.     

Development of SRM 2907 trace terrorist explosives simulants for the detection of Semtex and triacetone triperoxide

Effective and accurate detection of trace explosives is crucial in the effort to thwart terrorist explosives attacks. A National Institute of Standards and Technology (NIST) standard reference material (SRM) has been developed for the evaluation of trace explosives detectors that sample by collection of residue particles using swiping or air filtration. SRM 2907 Trace Terrorist Explosives Simulants consists of two materials individually simulating the residues of the plastic explosive Semtex [for pentaerytritol tetranitrate (PETN)] and the improvised explosive triacetone triperoxide (TATP). Unique challenges were encountered in the development of these materials, including the selection of suitable inert substrates, material preparation, thermal stability testing, and analytical method development. Two independent analytical methods based on liquid chromatography with ultraviolet absorbance and mass spectrometric detection, LC-UV and LC/MS, respectively, were developed and used to certify the mass fractions of PETN and TATP. These materials were further evaluated for their suitability on a field swipe-sampled trace explosives detectors based on ion mobility spectrometry (IMS).     

Separation and sequencing of isomeric oligonucleotide adducts using monolithic columns by ion-pair reversed-phase nano-HPLC coupled to ion trap mass spectrometry

An ion-pair reversed-phase nano-high-performance liquid chromatography (IP-RP-nano-HPLC) method using a monolithic poly(styrene-divinylbenzene) (PS-DVB) column coupled to nanoelectrospray ionization mass spectrometry (nano-ESI-MS) was evaluated to separate and identify isomeric oligonucleotide adducts derived from the covalent binding of (+/-)-anti-7r,8t-dihydroxy-9t,10-epoxy-7,8,9,10-tetrahydrobenzo[a]pyrene [(+/-)-anti-BPDE] to double-stranded (ds) 5'-PO4--ACCCGCGTCCGCGC-3'/5'-GCGCGGGCGCGGGT-3' oligonucleotide. The influence of three different nanospray emitters on electrospray signal was evaluated in terms of analyte ion sensitivity. The best nanoelectrospray performance for the oligonucleotides was observed with the distal metal-coated emitter. The performance of three different stationary phases was also investigated. The chromatographic separation performance of the polymeric monolithic PS-DVB stationary phase significantly surpassed that of columns packed with the microparticulate sorbents C18 or PS-DVB. Different mobile phase organic solvents and ion-pairing reagents were also evaluated. An optimized mobile phase consisting of methanol and 25 mM triethylammonium bicarbonate resulted in the best chromatographic resolution and increased MS sensitivity of the oligonucleotides. By using a monolithic PS-DVB stationary phase fabricated in a nanocolumn, four positional isomeric (+/-)-BPDE-oligonucleotide adducts were separated and identified. In addition to four of the possible five positional isomers, three positional isomers were also resolved to several diastereoisomers, although their stereostructures could not be identified in the absence of reference standards.     

Analysis and characterization of switched reluctance motors: Part II. Flow, thermal, and vibration analyses

This paper presents new approaches for certain mechanical characterizations, such as thermal and vibration analyses, of switched reluctance motors (SRMs). The paper presents, in three parts, the modeling and simulation procedure for three-dimensional (3-D) finite-element analysis (FEA)-based flow analysis, flow-analysis-based thermal analysis, and a realistic vibration analysis. Section I documents a computational fluid dynamics (CFD) flow analysis procedure for the evaluation of the air velocity distribution inside the SRM at any speed. Section II presents a prediction method for steady-state and transient thermal characteristics of an SRM, using 3-D FEA. The convection coefficient at various heat-dissipating surfaces inside SRM, which is not a material property, but a quantity that solely depends on the air velocity at the respective surfaces, is the major parameter to be evaluated for an accurate simulation of heat distribution. The results of CFD analysis are used, for the first time on SRM, for this purpose. Windage loss calculation, one of the other applications of CFD, is introduced. Vibration in electric motors is an inevitable, at the same time undesirable, property that originates from four major sources: mechanical, magnetic, applied loads and, to a smaller extent, the associated electronic devices. Section III presents: 1) a thorough numerical study of vibration analysis in SRMs, using 3-D FEA methodology, covering all the above vibration sources except the electronics; 2) a 3-D modal analysis of SRMs including stator and rotor structures, shaft, end shields, bearings, and housing; 3) an unbalanced rotor dynamics analysis; 4) associated harmonic analysis; and 5) a stress analysis under various loading conditions. The 3-D vibration analyses presented in this paper to examine the vibration in SRM as a whole are new additions to SRM vibration analysis. Section IV concludes the paper. Future work in every section is highlighted.     

Molar mass and molar mass distribution of polystyrene particle size standards

Monodisperse polystyrene microspheres and nanospheres are often used as particle size standards for calibration of size-measuring instruments. They are potentially useful as the mass standards for particle mass spectrometry as well. We demonstrated in this work that it is possible to achieve high-precision mass determination for single polystyrene spheres using a quadrupole ion trap. We introduced the particles into the trap by laser-induced acoustic desorption and probed them with light scattering. Mass-to-charge ratios of the individual particles were determined from applied trap-driving frequencies, voltage amplitudes and the observed starlike oscillatory trajectories projected on the radial plane. Creation of one-electron differentials through charge-state changes by electron bombardment allowed determination for the absolute mass of a single trapped particle to a precision better than 0.1%. Both molar mass and molar mass distribution were deduced from a large number of measurements for NIST polystyrene particle size standards (SRMs 1690 and 1691). Our results are in excellent agreement with the size measurement for the 0.895-microm spheres (NIST SRM 1690), but a small discrepancy (4%) in number-average mass was found for the 0.269-microm spheres (NIST SRM 1691).     

Achieving 0.2% relative expanded uncertainty in ion chromatography analysis using a high-performance methodology

A high-performance (HP) technique that was originally developed for inductively coupled plasma optical emission spectrometry (ICP-OES) has been successfully translated to ion chromatography (IC) to enable analyses with extremely low uncertainty. As an example application of the HP-IC methodology, analyses of several National Institute of Standards and Technology (NIST) Standard Reference Materials (SRMs) in the SRM 3180 series of anion standard solutions are reported. The relative expanded uncertainty values expressed at 95% confidence for these analyses range from 0.087% to 0.27% and average 0.18%. Strong correlation between analyte and internal standard anion peak heights or peak areas, as well as the use of a unique drift-correction approach, is shown to be important for attaining such low uncertainty.     

Simultaneous mass bias and fractionation corrections utilizing isotopic solid standards and laser ablation ICPMS

Homogeneous incorporation of analytes of known isotopic abundance into sol-gel-derived standards that mimic important mineral systems has the potential to contribute significantly to providing solid standard benchmarks for a range of applications. This preliminary study reports on the synthesis of solid glass standards produced via the sol-gel method and their doping with Standard Reference Material (SRM) 981 Common Lead Isotopic Standard and SRM 982 Equal-Atom Lead Isotopic Standard. Custom isotopic materials were also prepared using mixtures of the two isotopic SRMs. Particles from these solid samples were then introduced into an inductively coupled plasma mass spectrometer via laser ablation to determine whether materials of suitable homogeneity could be developed as isotopic reference materials. Preliminary results for Pb isotope ratios show that these solid isotopic reference standards are capable of correcting for instrumental mass bias and laser ablation-induced bias due to fractionation simultaneously. Correction factors generated from the quotient of the certified and measured Pb isotopic ratios in sol-gel disks spiked with SRMs 981 and 982 were successfully applied to produce accurate isotope ratios using comparative control/unknown checks. These correction factors were also used to assign Pb isotopic ratios in NIST SRM 612 Trace Elements in Glass that were in excellent agreement with published measurements, suggesting that tunable matrix sol-gel disks can serve as adequate control matrixes for evaluation of isotope ratios in glass samples.     

Capillary electrochromatography coupled to atmospheric pressure photoionization mass spectrometry for methylated benzo[a]pyrene isomers

Benzo[a]pyrene, one of the most carcinogenic PAHs, has 12 monomethylated positional isomers (MBAPs). A strong correlation between the carcinogenicity of these isomers and methyl substitution has been reported. In this study, on-line coupling of capillary electrochromatography (CEC) and atmospheric pressure photoionization mass spectrometry (APPI-MS) provides a unique solution to highly selective separation and sensitive detection of MBAP isomers. The studies indicated that APPI provides significantly better sensitivity compared to electrospray ionization and atmospheric pressure chemical ionization modes of MS. A systematic investigation of APPI-MS detection parameters and CEC separation is established. First, several sheath liquid parameters (including type and concentration of volatile buffers, type and content of organic modifiers, use of dopants and inorganic/organic additives, and sheath liquid flow rate) and APPI-MS spray chamber parameters (capillary voltage, vaporizer temperature, nebulizer pressure) were found to have effects on detection sensitivity as well as the profile of mass spectrum. For example, when ammonium acetate was replaced with acetic acid in the sheath liquid, the MS signal was enhanced as much as 90% and the formation of ammonia adduct was effectively suppressed. Next, the separation of MBAP isomers was conducted on internal tapered columns packed with polymeric C18 stationary phase. With the use of a mobile phase consisting of slightly higher acetonitrile content (90%,v/v) and a small amount of tropylium ion, the analysis times were significantly shortened by 20 min without compromising the resolutions between the isomers. Finally, quantitative aspects of the CEC-APPI-MS method were demonstrated using 7-MBAP as the internal standard. The calibration curves of three of the most carcinogenic isomers, namely, 1-MBAP, 3-MBAP, and 11-MBAP, showed good linearity in the range of 2.5-50 microg/mL with a limit of detection at 400 ng/mL.