Effect of Al and Ce oxide layers electrodeposited on OC4004 stainless steel on its corrosion characteristics in acid media

The changes in the corrosion characteristics of stainless steel OC4004 in 0.1 M HNO₃ after electrodeposition of thin Al and Ce oxide films on it has been investigated. The Ce₂O₃–CeO₂ layers have been found to possess a pronounced stabilizing effect on the steel passive state and on its corrosion resistance, respectively, whereas the Al₂O₃ layers do not improve considerably the corrosion behaviour of the SS/Al₂O₃ system. A twice-lower corrosion current was observed with a ternary SS/Al₂O₃/Ce₂O₃–CeO₂ system in the passive region, while the zones of potentials, where the steel is in a stable passive state, are not changed. The obtained results permit the assumption that the cerium oxides layer acts as an effective cathode playing a determining role with respect to the improvement of the corrosion behavior of the steel. It has been concluded that when the SS/Al₂O₃/Ce₂O₃–CeO₂ system is used in media containing nitric acid, the corrosion will proceed at potentials where the passive state of steel would not be disturbed.     

Oxidation behaviour of Ti-46.7Al-1.9W-0.5Si in air and Ar-20%O2 between 750 and 950 °C

The oxidation behaviour of an intermetallic alloy, Ti-46.7Al-1.9W-0.5Si, was studied in air and Ar-20%O₂ atmospheres at 750, 850 and 950 °C. Oxidation of the alloy followed a parabolic rate law at low temperature (750 °C) in both environments. The alloy oxidised parabolically in air and at a slower rate in Ar-20%O₂ at 850 °C. Following a parabolic oxidation for a relatively short exposure period (72 h) at 950 °C, the oxidation rate was reduced after prolonged exposure (up to 240 h) in air. The alloy oxidised in a slower manner in the Ar-20%O₂ atmosphere at 950 °C. Higher oxidation rates were observed in air than in Ar-20%O₂ at all three experimental temperatures. Multi-layered scales developed in both environments. The scale formed in air consisted of TiO₂/Al₂O₃/TiO₂/TiN/TiAl₂ layers, ranging from the surface to the substrate—whilst the scale developed in the Ar-20%O₂ atmosphere comprised of the sequence TiO₂/Al₂O₃/TiO₂/Al₂O₃/Ti₃Al/substrate. The two layers of Al₂O₃ in Ar-20%O₂ were more effective in providing protection of the substrate against high temperature corrosion than the single layer of Al₂O₃ formed in air.     

Activity determination in the alumina-dysprosia system by Knudsen effusion mass spectrometry

The vaporization of Al-Dy-O mixtures has been investigated by the Knudsen effusion mass spectrometry technique. The saturated vapor has been found to consist of the atoms Al, O and the molecules AlO, Al₂O, DyO. At the initial stage the vaporization of Dy₂O₃ and Al₂O₃-Dy₂O₃ mixtures was found to be incongruent and accompanied by some loss of oxygen. An attainment of congruently vaporizing composition and equilibrium state takes quite a long time. The activities of binary oxides have been measured at T = 2130 K. The Gibbs energies and enthalpies have been derived for formation of the compounds Dy₄Al₂O₉, DyAlO₃ and Dy₃Al₅O₁₂ from sesquioxides.     

Hot corrosion behaviour of plasma sprayed YSZ/Al2O3 dispersed NiCrAlY coatings on Inconel-718 superalloy

Oxide dispersed NiCrAlY bond coatings have been developed for enhancing thermal life cycles of thermal barrier coatings (TBCs). However, the role of dispersed oxides on high temperature corrosion, in particular hot corrosion, has not been sufficiently studied. Therefore, the present study aims to improve the understanding of the effect of YSZ dispersion on the hot corrosion behaviour of NiCrAlY bond coat. For this, NiCrAlY, NiCrAlY + 25 wt.% YSZ, NiCrAlY + 50 wt.% YSZ and NiCrAlY + 75 wt.% YSZ were deposited onto Inconel-718 using the air plasma spraying (APS) process. Hot corrosion studies were conducted at 800 °C on these coatings after covering them with a 1:1 weight ratio of Na₂SO₄ and V₂O₅ salt film. Hot corrosion kinetics were determined by measuring the weight gain of the specimens at regular intervals for a duration of 51 h. X-ray diffraction, scanning electron microscopy and energy dispersive spectroscopy techniques were used to determine the nature of phases formed, examine the surface attack and to carry out microanalysis of the hot corroded coatings respectively. The results show that YSZ dispersion causes enhanced hot corrosion of the NiCrAlY coating. Leaching of yttria leads not only to the formation of the YVO₄ phase but also the destabilization of the YSZ by hot corrosion. For the sake of comparison, the hot corrosion behaviour of a NiCrAlY + 25 wt.% Al₂O₃ coating was also examined. The study shows that the alumina dispersed NiCrAlY bond coat offers better hot corrosion resistance than the YSZ dispersed NiCrAlY bond coat, although it is also inferior compared to the plain NiCrAlY bond coat.     

Nano-grain Al2O3 crystals grown by sputtering of aluminium on CoCrPt thin films for potential application in ultra-high-density recording media

Designing supraceramic assemblies based on Al₂O₃ has remained a challenge due to the problems associated with the suitable dispersion in neat compounds and ability to control the preferred orientation in a unique fashion. Herein, granular HCP-(CoCrPt)_100−X(Al₂O₃)_X (X represents the percent weight) thin films with Si(1 0 0) substrates have been fabricated using sputtering technique followed by annealing treatment. Structural and magnetic properties of thin film have been investigated for potential application in magnetic recording media. It was shown that coercivity increased from 0.5 to 2.5 kOe by increasing the nano-grain Al₂O₃ content in the CoCrPt magnetic layers. In CoCrPt-Al₂O₃ thin films coercivity of 2.5 kOe has been obtained with increasing the Al₂O₃ content from 3 to 13 wt.% in the annealed thin films. The structural properties of the samples were studied using X-ray diffraction (XRD) and transmission electron microscope (TEM) equipped with selected area electron diffraction (SAED). The magnetic properties of the samples were measured with a vibrating sample magnetometer (VSM). The VSM results showed that the HCP-CoCrPt-Al₂O₃ granular films are a promising candidate for ultra-high-density recording media because of its low Al₂O₃ content and simple manufacturing process.     

Effect of Y2O3 additions on the plasticity of sintered Cr2O3

We have carried our constant strain-rate compression tests on polycrystalline Cr₂O₃ and Cr₂O₃ doped with 0.09 wt. % Y₂O₃ to establish whether there exists an effect of Y₂O₃ on the plasticity of Cr₂O₃. This study is motivated by previous work on the oxidation of alloys containing reactive-element additions. In that work, it has been observed that the addition of oxygen-active elements, such as Y to alloys that form Cr₂O₃ or Al₂O₃ oxide layers upon exposure at high temperature, strongly enhances the adhesion of the oxide layer to the base alloy as compared with alloys without reactive-element additions. We have found that at 1200°C (1) chromia exhibits limited plasticity at high temperatures, and (2) the presence of Y in the oxides does not enhance plasticity compared with addition-free oxides.     

Annealing temperature effect on the corrosion parameters of autocatalytically produced Ni-P and Ni-P-Al2O3 coatings in artificial seawater

Ni-P and Ni-P-Al₂O₃ amorphous alloy coatings with 9.3 and 8.3 wt.% P respectively were obtained by autocatalytic deposition at 90 °C on carbon steel substrates. The effect of annealing temperature (100, 200, 300, 400 and 500 °C) upon the corrosion parameters of the coatings in artificial seawater with pH 5.0 and 8.1 at room temperature was evaluated by potentiodynamic polarisation and electrochemical impedance spectroscopy. It was found that deposits annealed at 400 and 500 °C presented an increase of the charge transfer resistance and negligible changes on samples annealed at lower temperature. Polarisation tests showed a charge transfer controlled anodic kinetics on both Ni-P and Ni-P-Al₂O₃ deposits and diffusion controlled cathodic reaction in artificial seawater at pH 5.0 and 8.1. The coatings did not present passive behaviour in the electrolytes and impedance measurements showed a single time constant for all cases with the lowest double layer capacitance (C_dl) for samples annealed at 400 and 500 °C. The best corrosion parameters were observed on Ni-P and Ni-P-Al₂O₃ coatings annealed at temperatures higher than 400 °C, which is the temperature where crystallisation of this kind of coatings takes place.     

Microstructural analysis of YSZ and YSZ/Al2O3 plasma sprayed thermal barrier coatings after high temperature oxidation

Air plasma sprayed TBCs usually include lamellar structure with high interconnected porosities which transfer oxygen from YSZ layer towards bond coat and cause TGO growth and internal oxidation of bond coat.The growth of thermally grown oxide (TGO) at the interface of bond coat and ceramic layer and internal oxidation of bond coat are considered as the main destructive factors in thermal barrier coatings.Oxidation phenomena of two types of plasma sprayed TBC were evaluated: (a) usual YSZ (yttria stabilized zirconia), (b) layer composite of (YSZ/Al₂O₃) which Al₂O₃ is as a top coat over YSZ coating. Oxidation tests were carried out on these coatings at 1100°C for 22, 42 and 100h. Microstructure studies by SEM demonstrated the growth of TGO underneath usual YSZ coating is higher than for YSZ/Al₂O₃ coating. Also cracking was observed in usual YSZ coating at the YSZ/bond coat interface. In addition severe internal oxidation of the bond coat occurred for usual YSZ coating and micro-XRD analysis revealed the formation of the oxides such as NiCr₂O₄, NiCrO₃ and NiCrO₄ which are accompanied with rapid volume increase, but internal oxidation of the bond coat for YSZ/Al₂O₃ coating was lower and the mentioned oxides were not detected.     

Synthesis and characterization of Al2O3-Ce0.5Zr0.5O2 powders prepared by chemical coprecipitation method

Al₂O₃-Ce_0.5Zr_0.5O₂ catalytic powders were synthesized by the coprecipitation (ACZ-C) and mechanical mixing (ACZ-M) methods, respectively. As-synthesized powders were characterized by XRD, Raman spectroscopy, surface area and thermogravimetric analyses. It was found that the mixing extent of Al³⁺ ions affected the phase development, texture and oxygen storage capacity (OSC) of the Ce_0.5Zr_0.5O₂ powder. Single phase of ACZ-C could be maintained without phase separation and inhibit α-Al₂O₃ formation up to 1200 °C. The specific surface area value of ACZ-C (81.5 m²/g) was larger than that of ACZ-M (62.1 m²/g) and Ce_0.5Zr_0.5O₂ (17.1 m²/g) powders, which were calcined at 1000 °C. In comparison with ACZ-C and Al₂O₃, which were calcined at high temperature (900–1200 °C), it was found that the degradation rate of specific surface area of ACZ-C was lower than that of Al₂O₃. ACZ-C sample showed a higher thermal stability to resist phase separation and crystallite growth, which enhanced the oxygen storage capacity property for Ce_0.5Zr_0.5O₂ powders.     

Combustion synthesis of CaSc2O4:Ce nano-phosphors in a closed system

The CaSc₂O₄:Ce³⁺ nano-phosphors were successfully prepared by a single-step combustion method at an ignition temperature as low as 200 °C in a closed autoclave using glycine as a fuel and PEG4000 as a dispersant. The samples were characterized by X-ray diffraction (XRD), photoluminescence (PL) spectroscopy, scanning electron microscopy (SEM) and transmission electron microscope (TEM). The results revealed that CaSc₂O₄:Ce³⁺ nano-phosphors can be conveniently prepared at an ignition temperature as low as 200 °C, which was much lower than that in the ordinary combustion methods. The optimized ignition temperature was 220 °C. The CaSc₂O₄:Ce³⁺ nano-phosphors give a uniform particle size in the range of 15-20 nm. The low ignition temperature and the addition of PEG4000 dispersant play important roles in the formation of small sized nanoparticles. The as-prepared nano-phosphors were incompact aggregates, but highly dispersed nano-phosphors can be obtained after further ultrasonic treatment. The CaSc₂O₄:Ce³⁺ nano-phosphors give satisfactory luminescence characteristic benefiting from the closed circumstance, in which cerium atoms can be isolated from the oxidizing atmosphere and non-fluorescent Ce⁴⁺ ions can be ruled out. The present highly dispersed CaSc₂O₄:Ce³⁺ nano-phosphors with efficient fluorescence are promising in the field of biological labeling, and the present low temperature combustion method is facile and convenient and can be applied as a universal process for preparing non-aggregate oxide nano-phosphors, especially those being sensitive to air at high temperature.     

Novel thermal barrier coatings based on La2Ce2O7/8YSZ double-ceramic-layer systems deposited by electron beam physical vapor deposition

Novel thermal barrier coatings based on La₂Ce₂O₇/8YSZ double-ceramic-layer (DCL) systems, which were deposited by electron beam physical vapor deposition (EB-PVD), were found to have a longer lifetime compared to the single layer La₂Ce₂O₇ (LC) system, and even much longer than that of the single layer 8YSZ system under burner rig test. The DCL coating structure design can effectively alleviate the thermal expansion mismatch between LC coating and bond coat, as well as avoid the chemical reaction between LC and Al₂O₃ in thermally grown oxide (TGO), which occurs above 1000 °C as determined by differential scanning calorimetry (DSC) analysis. The failure mechanism of LC/8YSZ DCL coating is mainly due to the sintering of LC coating surface after long-term thermal cycling.     

Cyclic oxidation behavior and thermal barrier effect of YSZ-(Al2O3/YAG) double-layer TBCs prepared by the composite sol-gel method

Novel YSZ (6 wt.% yttria partially stabilized zirconia)-(Al₂O₃/YAG) (alumina-yttrium aluminum garnet, Y₃Al₅O₁₂) double-layer ceramic coatings were fabricated using the composite sol-gel and pressure filtration microwave sintering (PFMS) technologies. The thin Al₂O₃/YAG layer had good adherence with substrate and thick YSZ top layer, which presented the structure of micro-sized YAG particles embedded in nano-sized α-Al₂O₃ film. Cyclic oxidation tests at 1000 °C indicated that they possessed superior properties to resist oxidation of alloy and improve the spallation resistance. The thermal insulation capability tests at 1000 °C and 1100 °C indicate that the 250 μm coating had better thermal barrier effect than that of the 150 μm coating at different cooling gas rates. These beneficial effects should be mainly attributed to that, the oxidation rate of thermal grown oxides (TGO) scale is decreased by the “sealing effect” of α-Al₂O₃, the “reactive element effect”, and the reduced thermal stresses by means of nano/micro composite structure. This double-layer coating can be considered as a promising TBC.     

Effect of applied current on the electrodeposited Ni-Al2O3 composite coatings

Nano-sized Al₂O₃ ceramic particles (50 nm) were co-deposited with nickel using electrodeposition technique to develop composite coatings. The coatings were produced in an aqueous nickel bath at different current densities and the research investigated the effect of applied current on microstructure and thickness of the coatings. The variation in some mechanical properties such as hardness, wear resistance, and the adhesive strength of the composite coatings is influenced by the applied current and this was also studied. The morphology of the coatings was characterized by scanning electron microscopy and energy dispersive X-ray spectroscopy. The hardness, wear resistance, and bond strength of the coatings were evaluated by Vickers micro-hardness test, pin-on-disc test, and tensile test, respectively. Results showed that the Al₂O₃ particles were uniformly distributed in the coatings, and the coatings deposited at a current density of 0.01 A/cm² was most favorable in achieving a maximum current efficiency which causes the co-deposition of a maximum amount of Al₂O₃ particles (4.3 wt.%) in the coatings. The increase in Al₂O₃ particles in the coatings increased the mechanical properties of the Ni-Al₂O₃ composite coatings by grain refining and dispersion strengthening mechanisms.     

Fabrication of A356 composite reinforced with micro and nano Al2O3 particles by a developed compocasting method and study of its properties

Aluminum/alumina composites are used in automotive and aerospace industries due to their low density and good mechanical strength. In this study, compocasting was used to fabricate aluminum-matrix composite reinforced with micro and nano-alumina particles. Different weight fractions of micro (3, 5 and 7.5 wt.%) and nano (1, 2, 3 and 4 wt.%) alumina particles were injected by argon gas into the semi-solid state A356 aluminum alloy and stirred by a mechanical stirrer with different speeds of 200, 300 and 450 rpm. The microstructure of the composite samples was investigated by Optical and Scanning Electron Microscopy. Also, density and hardness variation of micro and nano composites were measured. The microstructure study results revealed that application of compocasting process led to a transformation of a dendritic to a nondendritic structure of the matrix alloy. The SEM micrographs revealed that Al₂O₃ nano particles were surrounded by silicon eutectic and inclined to move toward inter-dendritic regions. They were dispersed uniformly in the matrix when 1, 2 and 3 wt.% nano Al₂O₃ or 3 and 5 wt.% micro Al₂O₃ was added, while, further increase in Al₂O₃ (4 wt.% nano Al₂O₃ and 7.5 wt.% micro Al₂O₃) led to agglomeration. The density measurements showed that the amount of porosity in the composites increased with increasing weight fraction and speed of stirring and decreasing particle size. The hardness results indicated that the hardness of the composites increased with decreasing size and increasing weight fraction of particles.     

Al2O3-nanodiamond composite coatings with high durability and hydrophobicity prepared by aerosol deposition

We attempted the room-temperature fabrication of Al₂O₃-based nanodiamond (ND) composite coating films on glass substrates by an aerosol deposition (AD) process to improve the anti-scratch and anti-smudge properties of the films. Submicron Al₂O₃ powder capable of fabricating transparent hard coating films was used as a base material for the starting powders, and ND treated by 1H,1H,2H,2H-perfluorooctyltriethoxysilane (PFOTES) was added to the Al₂O₃ to increase the hydrophobicity and anti-wear properties. The ND powder treated by PFOTES was mixed with the Al₂O₃ powder by ball milling to ratios of 0.01 wt.%, 0.03 wt.%, and 0.05 wt.% ND. The water contact angle (CA) of the Al₂O₃-ND composite coating films was increased as the ND ratio increased, and the maximum water CA among all the films was 110°. In contrast to the water CA, the Al₂O₃-ND composite coating films showed low transmittance values of below 50% at a wavelength of 550 nm due to the strong agglomeration of ND. To prevent the agglomeration of ND, the starting powders were mixed by attrition milling. As a result, Al₂O₃-ND composite coating films were produced that showed high transmittance values of close to 80%, even though the starting powder included 1.0 wt.% ND. In addition, the Al₂O₃-ND composite coating films had a high water CA of 109° and superior anti-wear properties compared to those of glass substrates.     

基于磁过滤技术的热障涂层表面Al2O3 覆盖层抗CMAS腐蚀性能

为了提高热障涂层（TBC）的抗沉积物（主要成分为CaO、MgO、Al₂O₃和SiO₂,简称CMAS）腐蚀性能,采用磁过滤阴极真空电弧（FCVA）技术在TBC表面上制备了致密的Al₂O₃覆盖层,比较和分析了Al₂O₃改性TBC和沉积态TBC的润湿行为和抗CMAS腐蚀性能。结果表明：使用FCVA技术制备Al₂O₃覆盖层的过程对7%（质量分数）氧化钇稳定的氧化锆（7YSZ）相的结构无明显影响,且经Al₂O₃改性的TBC综合性能均优于沉积态TBC。在1250 ℃、CMAS腐蚀条件下,Al₂O₃覆盖层有效地限制了熔融CMAS在TBC表面上的扩散行为。同时,Al₂O₃填充了7YSZ柱状晶之间的间隔并且阻碍了熔融CMAS的渗透,证明了FCVA可作为一种制备Al₂O₃涂层的新方法以提高TBC的抗CMAS腐蚀性能,且Al₂O₃涂层及其制备过程对TBC的热震性能均无消极影响。     

Investigation of the defect density in ultra-thin Al2O3 films grown using atomic layer deposition

The film perfection in terms of pinhole defect densities of ultra-thin Al₂O₃ grown by atomic layer deposition (ALD) has been quantitatively characterized. A significant defect density reduction from ~ 1.2 × 10⁵/cm² to ~ 90/cm² was demonstrated for 2 nm-thick Al₂O₃ by using an ALD tungsten (W) buffer layer on the nickel (Ni) substrate. The reason for the defect reduction was attributed to efficient nucleation of ALD Al₂O₃ on ALD W. The effect of the buffer layer becomes less essential as the Al₂O₃ thickness increases, where the substrate surface physical conditions such as particle contamination become the main cause for defects.     

Effect of Feedstock Size and its Distribution on the Properties of Detonation Sprayed Coatings

The detonation spraying is one of the most promising thermal spray variants for depositing wear and corrosion resistant coatings. The ceramic (Al₂O₃), metallic (Ni-20 wt%Cr) , and cermets (WC-12 wt%Co) powders that are commercially available were separated into coarser and finer size ranges with relatively narrow size distribution by employing centrifugal air classifier. The coatings were deposited using detonation spray technique. The effect of particle size and its distribution on the coating properties were examined. The surface roughness and porosity increased with increasing powder particle size for all the coatings consistently. The feedstock size was also found to influence the phase composition of Al₂O₃ and WC-Co coatings; however does not influence the phase composition of Ni-Cr coatings. The associated phase change and %porosity of the coatings imparted considerable variation in the coating hardness, fracture toughness, and wear properties. The fine and narrow size range WC-Co coating exhibited superior wear resistance. The coarse and narrow size distribution Al₂O₃ coating exhibited better performance under abrasion and sliding wear modes however under erosion wear mode the as-received Al₂O₃ coating exhibited better performance. In the case of metallic (Ni-Cr) coatings, the coatings deposited using coarser powder exhibited marginally lower-wear rate under abrasion and sliding wear modes. However, under erosion wear mode, the coating deposited using finer particle size exhibited considerably lower-wear rate.     

Improving the Na2SO4-induced corrosion resistance of Ti3AlC2 by pre-oxidation in air

Ti₃AlC₂ suffers severe Na₂SO₄-induced corrosion attacks at temperatures higher than 800 °C in air. A convenient and efficient pre-oxidation method is proposed to enhance the corrosion resistance of Ti₃AlC₂. The corrosion weight-changes of the pre-oxidized samples were decreased by about four orders of magnitude compared with those of the untreated specimens. The mechanism on improvement of corrosion resistance was investigated by means of thermogravimetric analysis, X-ray diffraction and scanning electron microscopy/energy-dispersive spectroscopy. A continuous and adherent α-Al₂O₃ scale was prepared by high-temperature pre-oxidation treatment in air. The preformed dense Al₂O₃ scale has good compatibility with the Ti₃AlC₂ substrate, and consequently, can act as an efficient barrier against corrosion. Long-time corrosion tests demonstrate that the Al₂O₃ scale conserves after corrosion attack and is capable of long-term stability.     

Carbon doped α-Al2O3 coatings grown by chemical vapor deposition

Alumina (Al₂O₃) coatings deposited by chemical vapor deposition (CVD) with different modifications and dopants are widely applied as wear resistant coatings on cemented carbide cutting tools. The aim of this work was to investigate the influence of CH₄ addition on the deposition of α-Al₂O₃ by low-pressure chemical vapor deposition (LPCVD). The coatings were deposited at 1005 °C on a TiN–TiCN base layer using a precursor gas mixture of AlCl₃, CH₄, CO₂, HCl, H₂S, and H₂. Coating characterization was conducted by scanning electron microscopy (SEM), glow discharge optical emission spectroscopy (GDOES), X-ray photoelectron spectroscopy (XPS), time-of-flight secondary ion mass spectroscopy (ToF-SIMS), glancing angle X-ray diffraction (GAXRD), nanoindentation and tribological ball-on-disk tests against Al₂O₃ balls. Additionally, the ball-on-disk wear tracks were investigated by Raman spectroscopy.