共查询到19条相似文献,搜索用时 93 毫秒
1.
乳液聚合法是制备水性含硅聚合物最常见、最有效的方法。介绍了种子乳液聚合、核/壳乳液聚合、无皂乳液聚合、微乳液聚合、互穿网络聚合等制备水性含硅聚合物的方法,并对水性含硅聚合物涂料的应用做了探讨。 相似文献
2.
3.
4.
《胶体与聚合物》2000,(1)
O6 31 .4 两亲聚合物溶液性质及其乳液聚合的研究进展 /徐祖顺 ,封麟先 ,易昌凤 (浙江大学高分子系 ) //高分子材料科学与工程 .一 1 998,1 4( 4 ) .- 1~ 4 综述了两亲聚合物溶液性质以及作为乳化剂的乳液聚合研究进展和现状 ,介绍了两亲聚合物溶液的特殊性质 ,阐述了作为乳化剂的独特作用。图 3参 35。 (含远摘 )O6 33.4 叔胺型水性聚氨酯的合成及其性能 /郝广杰 ,张邦华 ,宋谋道 ,周庆业 (南开大学高分子化学研究所 ) //应用化学 .- 1 998,1 5( 3) .- 30~ 34 将含有不同胺基的聚氨酯预聚体在酸性水溶液中乳化得到水性取氨酯。结果… 相似文献
5.
简述了丙烯酸酯改性水性聚氨酯4种常用的改性方法:嵌段共聚改性、接枝共聚改性、核-壳乳液聚合改性和互穿聚合物网络改性(IPN);综述了国内外丙烯酸酯改性水性聚氨酯研究进展。 相似文献
6.
7.
8.
9.
本文利用含氟丙烯酸酯单体和含硅丙烯酸单体,对成膜性很好的丙烯酸酯树脂进行改性,从而在聚合物分子中引入有机硅链段和有机氟链段,降低涂膜的表面能,合成一种表面能低、憎水性强、耐久耐候性好的氟硅改性丙烯酸酯树脂防冰涂料。 相似文献
10.
11.
乳液聚合技术最新研究进展 总被引:8,自引:0,他引:8
在简单介绍乳液聚合特点的基础上,重点对近几十年来乳液聚合中发展的新技术,如核/壳乳液聚合、互穿网络聚合、微乳液聚合、无皂乳液聚合以及其它的一些新型乳液聚合方法进行了综述。 相似文献
12.
金属离子印迹聚合物微球的制备研究进展 总被引:4,自引:0,他引:4
对金属离子印迹的原理、发展现状等进行了概述,尤其对印迹聚合物微球制备方法中的种子乳液溶胀聚合、乳液聚合和悬浮聚合、W/O/W多相乳液聚合等方法进行了较详细的介绍。 相似文献
13.
14.
Marcelo Kaminski Lenzi Fabricio Machado Silva Enrique Luis Lima Jos Carlos Pinto 《应用聚合物科学杂志》2003,89(11):3021-3038
Emulsion and suspension polymerization processes have widely been studied for more than 40 years. Although both polymerization processes are performed in heterogeneous media, each one presents its own typical characteristics, such as the particle size distribution, molecular weight distribution, polymer particle nucleation rate, and polymerization rate. In this study, semibatch styrene suspension polymerizations were carried out with feed compositions typical of emulsion processes. The initial reactor charge resembled the recipe of standard styrene suspension polymerizations, and the emulsion polymerization constituents were added during the batch. The influence of the moment at which the emulsion feed was started on the course of the polymerization and the effects of the feed on the polymer properties were analyzed. The polymer particle morphology and the average molecular weights changed very significantly with the emulsion feed time, and the changes could lead to the production of broad molecular weight distributions. Core–shell polymer particles could also be obtained, with the core being formed of polymer particles originating from the suspension polymerization process and the shell being formed of polymer particles originating from the emulsion polymerization. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 3021–3038, 2003 相似文献
15.
16.
17.
原子转移自由基聚合体系中催化剂的脱除 总被引:2,自引:0,他引:2
采用甲苯为溶剂,酸性三氧化二铝为吸附剂脱除原子转移自由基聚合体系中的含铜催化剂,ICP AES表征铜的含量可降至10-6级。研究了两种催化剂CuCl/bpy和CuCl/dNbpy对苯乙烯和甲基丙烯酸丁酯的原子转移自由基本体和乳液聚合的催化及脱除, 结果表明:虽然CuCl/dNbpy对聚合反应具有较好的催化活性,但由于与聚合物具有较好的相溶性,使得催化剂较难从体系中脱除,脱除效果次于 CuCl/bpy。而乳液聚合,由于体系的复杂性,使其在吸附剂脱除之后聚合物中的铜含量高于本体聚合。 相似文献
18.
19.
采用乳液聚合法合成ABS接枝聚合物,通过改变反应过程中聚丁二烯、引发剂和分子量调节剂的用量,改变反应温度及增量反应时间,考察ABS接枝聚合物接枝率的变化。结果表明:在实验范围内,接枝率随着聚丁二烯或分子量调节剂用量的增加迅速减小;随着引发剂用量的增加或增量反应时间的增长而增大;随着反应温度的升高而增大,但变化不大。 相似文献