Performance optimization of irreversible refrigerators based on a new thermo-ecological criterion

A performance analysis and optimization based on a new thermo-ecological optimization criterion has been carried out for refrigerators. The ecological objective function is defined as the ratio of the cooling load to the loss rate of availability (or entropy generation rate). The maximum of the ecological performance criterion and the corresponding optimal conditions have been derived analytically. The optimum performance parameters which maximize the objective function have been investigated and the effects of irreversibility parameters on the general and optimal performances are discussed detailed. The obtained results may provide a general theoretical tool for the ecological design of refrigerators.     

A new thermoeconomic approach and parametric study of an irreversible regenerative Brayton refrigeration cycle

The detailed parametric study of an irreversible regenerative Brayton refrigerator cycle using the new thermoeconomic approach is presented in this paper. The external irreversibility is due to finite temperature difference between the cycle and the external reservoirs while the internal irreversibilities are due to the nonisentropic compression and expansion processes and the regenerative loss. The thermoeconomic objective function defined as the cooling load per unit cost is optimized with respect to the state point temperatures for a typical set of operating conditions. The power input and cooling load are found to be decreasing functions of the expansion outlet temperature (T₁), while it is the reverse in the case of COP. On the other hand, there are optimal values of the temperature T₁, cooling load, power input and COP at which the cycle attains the maximum objective function for a typical set of operating parameters. Again, the objective function, COP and cooling load further enhance, while the power input goes down, as the various values of the effectiveness or efficiency components are increased.     

Performance characteristics of an irreversible magnetic Brayton refrigeration cycle

Based on the thermodynamic properties of a paramagnetic salt, an irreversible model of the magnetic Brayton refrigeration cycle is established, in which the working substance is a special paramagnetic material. The expressions of the important performance parameters, such as the coefficient of performance, refrigeration load and work input, are derived. Moreover, the optimal performance parameters are obtained at the maximum coefficient of performance. The results obtained here may include the ones of the magnetic Brayton refrigeration cycle using the magnetic material obeyed the Curie law as the working substance, the magnetic Brayton refrigeration cycle without regeneration and the eversible magnetic Brayton refrigeration cycle. Therefore, the results obtained here have general significance and will be helpful to deeply understand the performance of a magnetic Brayton refrigeration cycle.     

Solar refrigeration options – a state-of-the-art review

A state-of-the-art review is presented of the different technologies that are available to deliver refrigeration from solar energy. The review covers solar electric, solar thermal and some new emerging technologies. The solar thermal systems include thermo-mechanical, absorption, adsorption and desiccant solutions. A comparison is made between the different solutions both from the point of view of energy efficiency and economic feasibility. Solar electric and thermo-mechanical systems appear to be more expensive than thermal sorption systems. Absorption and adsorption are comparable in terms of performance but adsorption chillers are more expensive and bulkier than absorption chillers. The total cost of a single-effect LiBr–water absorption system is estimated to be the lowest.     

Efficiency and optimization of an annular fin with combined heat and mass transfer – An analytical solution

An analysis was carried out to study the efficiency of annular fin when subjected to simultaneous heat and mass transfer mechanisms. The temperature and humidity ratio differences are the driving forces for the heat and mass transfer, respectively. Analytical solutions are obtained for the temperature distribution over the fin surface when the fin is fully wet. The effect of the atmospheric pressure on the fin efficiency was also studied, in addition to fin optimum dimensions. It is demonstrated that the closed-form solutions for a dry-fin case presented in many text books are special cases for the solutions presented in this paper.     

Thermodynamics of magnetic refrigeration

A comprehensive treatment of the thermodynamics of cyclic magnetic refrigeration processes is presented. It starts with a review of the work, heat and internal energy of a magnetized specimen in a magnetic field, and a list of the thermodynamic potentials is given. These are based on the very recent discovery of an alternative Kelvin force. It is shown that this force is compatible with the internal energy proposed by Landau and Lifshitz. New formulas for the specific enthalpies are presented. Cyclic processes are discussed in detail, e.g. the Brayton, Ericsson and Carnot cycles. Magnetic refrigeration and magnetic heat pump cycles are preferably designed by applying the cascade or/and regeneration principle. Cascade systems allow wider temperature ranges to be obtained. The main objective of this article is to yield a theoretical basis for an optimal design of new magnetic refrigeration and heat pump devices.     

A theoretical study of a novel regenerative ejector refrigeration cycle

There has been a demand for developments of the ejector refrigeration systems using low grade thermal energy, such as solar energy and waste heat. In this paper, a novel regenerative ejector refrigeration cycle was described, which uses an auxiliary jet pump and a conventional regenerator to enhance the performance of the novel cycle. The theoretical analysis on the performance characteristics was carried out for the novel cycle with the refrigerant R141b. Compared with the conventional cycle, the simulation results show that the coefficient of performance (COP) of the novel cycle increases, respectively, by from 9.3 to 12.1% when generating temperature is in a range of 80–160 °C, the condensing temperature is in a range of 35–45 °C and the evaporating temperature is fixed at 10 °C. Especially due to the enhanced regeneration with increasing the pump outlet pressure, the improvement of COP of the novel cycle is approached to 17.8% compared with that in the conventional cycle under the operating condition that generating temperature is 100 °C, condensing temperature is 40 °C and evaporating temperature is 10 °C. Therefore, the characteristics of the novel cycle performance show its promise in using low grade thermal energy for the ejector refrigeration system.     

A theoretical study on a novel combined power and ejector refrigeration cycle

A new combined power and refrigeration cycle is proposed for the cogeneration, which combines the Rankine cycle and the ejector refrigeration cycle by adding an extraction turbine between heat recovery vapor generator (HRVG) and ejector. This combined cycle could produce both power output and refrigeration output simultaneously, and could be driven by the flue gas from gas turbine or engine, solar energy, geothermal energy and industrial waste heats. Parametric analysis and exergy analysis are conducted to examine the effects of thermodynamic parameters on the performance and exergy destruction in each component for the combined cycle. The results show that the condenser temperature, the evaporator temperature, the turbine inlet pressure, the turbine extraction pressure and extraction ratio have significant effects on the turbine power output, refrigeration output, exergy efficiency and exergy destruction in each component in the combined cycle. It is also shown that the biggest exergy destruction occurs in the heat recovery vapor generator, followed by the ejector and turbine.     

Evaluation of standing-wave thermoacoustic cycles for cooling applications

The most promising applications for standing-wave thermoacoustic cooling were investigated from the perspective of the ratio of coefficient of performance (COP) to the reversible COP or COPR. A design optimization program based on the thermoacoustic simulation program known as DELTAE was developed. The program was applied to two standing-wave thermoacoustic cooler configurations in order to determine the best possible COPRs for various temperature spans between hot-side and cold-side stack-end temperatures. It was found that the COPR of standing-wave thermoacoustic coolers increases with temperature span and reaches a maximum for temperature lifts around 80 °C. Analysis of the results and the losses clearly shows that the efficiency of these systems may be good for refrigeration, but not for air-conditioning and cryogenic cooling. The COPRs determined from measurements for various thermoacoustic coolers developed so far show similar trends, and generally support the optimization results.     

Irreversible refrigerators with isothermal heat exchanges: Réfrigérateurs irréversibles avecéchanges thermiques isotherms

A maximum for the coefficient of performance (COP_f) is verified for a temperature difference between reservoirs and the hot isotherm of a closed irreversible cyclical refrigerator working at steady-state conditions. A maximum also exists when the COP_f is considered as a function only of a parameter depending on the thermal characteristics of the heat exchangers. The influence of the parameter and entropy generation on the COP_f maxima is described.     

Thermoeconomic evaluation and optimization of an aqua-ammonia vapour-absorption refrigeration system

In this paper, the thermoeconomic concept is applied to the optimization of an aqua-ammonia vapour-absorption refrigeration (VAR) system—aimed at minimizing its overall product cost. The thermoeconomic concept based simplified cost minimization methodology calculates the economic costs of all the internal flows and products of the system by formulating thermoeconomic cost balances. The system is then thermoeconomically evaluated to identify the effects of design variables on costs and thereby enables to suggest values of design variables that would make the overall system cost-effective. Based on these suggestions, the optimization of the system is carried out through an iterative procedure. The results show a significant improvement in the system performance without any additional investment. Finally, sensitivity analysis is carried out to study the effect of the changes in fuel cost to the system parameters.     

Discussion of the feasibility of the Einstein refrigeration cycle

A careful modelling of the thermodynamic properties of the water–ammonia–butane system, the working fluid mixture used in the Einstein cycle, with the Patel–Teja cubic equation of state is performed. Numerical simulation is used to investigate the feasibility limits of this refrigeration cycle. Two modified configurations of the cycle are considered. A conflict between the evaporator and the condenser/absorber operating conditions is noted. The condenser/absorber operation needs a higher system pressure, which limits the refrigeration temperature in the case of air-cooling. On the other hand, the condensation of ammonia and the presence of a small quantity of water in the evaporator limit also the refrigeration temperature. In the case of a water-cooled machine, with a condenser/absorber temperature of 30 °C, the cycle COP reaches 0.19 which is still low.     

Analysis of room temperature magnetic regenerative refrigeration

Results of a room temperature magnetic refrigeration test bed and an analysis using a computational model are presented. A detailed demonstration of the four sequential processes in the transient magnetocaloric regeneration process of a magnetic material is presented. The temperature profile during the transient approach to steady state operation was measured in detail. A 5 °C evolution of the difference of temperature between the hot end and the cold end of the magnetocaloric bed due to regeneration is reported. A model is developed for the heat transfer and fluid mechanics of the four sequential processes in each cycle of thermal wave propagation in the regenerative bed combined with the magnetocaloric effect. The basic equations that can be used in simulation of magnetic refrigeration systems are derived and the design parameters are discussed.     

Extended temperature–entropy (T–s) diagrams for aqueous lithium bromide absorption refrigeration cycles

Temperature–entropy (T–s) diagrams have the unique capability of being able to quantify processes in terms of both the first and second laws of thermodynamics. Although use of generalised T–s diagrams has been made to indicate or represent generalised absorption cycles, with the exception for NH₃/water systems, these diagrams have not been specifically tailored to scale to quantify LiBr/water systems. The main barrier for this is that the diagram needs to represent the necessary properties of both the refrigerant (water) and of the solution (LiBr/water). This paper describes the use of the T–s diagram of water extended with additional curves to represent real and ideal LiBr/water absorption cycles. An explanation is provided on several methods available, including details of the thermodynamic justification of the method that was used, to construct the extended diagrams. Finally, the extended T–s diagram is provided with the representation of a real single-effect LiBr/water absorption refrigeration cycle. This should prove to be a valuable tool for design and research engineers to study and optimise LiBr/water chillers.     

Analysis of an air cycle refrigerator driving air conditioning system integrated desiccant system

This study presents theoretical investigation on the performance of air cycle refrigerator driving air conditioning system integrated desiccant system. Total system performance is evaluated and the system feasibility is examined. The system has such characteristics that (1) safe material of air and water are used as a refrigerant, (2) waste heat from air cycle refrigerator performs the regeneration of desiccant material for energy saving. It has been clarifying that (1) controlling the evaporative cooling process in air washer, the system can operate for a wide range of cooling loads, (2) the total coefficient of performance on air conditioning system is better than the conventional vapor compression system with reheating coil, and (3) the system performance highly depends on the ratio of the amount of outdoor intake air to the supply air.     

Application of an ejector in autocascade refrigeration cycle for the performance improvement

This paper presented a novel autocascade refrigeration cycle (NARC) with an ejector. In the NARC, the ejector is used to recover some available work to increase the compressor suction pressure. The NARC enables the compressor to operate at lower pressure ratio, which in turn improves the cycle performance. Theoretical computation model based on the constant pressure-mixing model for the ejector is used to perform a thermodynamic cycle analysis for the NARC with the refrigerant mixture of R23/R134a. The effects of some main parameters on cycle performance were investigated. The results show the NARC has an outstanding merit in decreasing the pressure ratio of compressor as well as increasing the COP. For NARC operated at the condenser outlet temperature of 40 °C, the evaporator inlet temperature of −40.3 °C, and the mass fraction of R23 is 0.15, the pressure ratio of the ejector reaches to 1.35, the pressure ratio of compressor is reduced by 25.8% and the COP is improved by 19.1% over the conventional autocascade refrigeration cycle.     

Thermodynamic analysis of an R744–R717 cascade refrigeration system

A thermodynamic analysis of carbon dioxide–ammonia (R744–R717) cascade refrigeration system is presented in this paper to optimize the design and operating parameters of the system. The design and operating parameters considered in this study include (1) condensing, subcooling, evaporating and superheating temperatures in the ammonia (R717) high-temperature circuit, (2) temperature difference in the cascade heat exchanger, and (3) evaporating, superheating, condensing and subcooling in the carbon dioxide (R744) low-temperature circuit. A multilinear regression analysis was employed in terms of subcooling, superheating, evaporating, condensing, and cascade heat exchanger temperature difference in order to develop mathematical expressions for maximum COP, an optimum evaporating temperature of R717 and an optimum mass flow ratio of R717 to that of R744 in the cascade system.     

Effectiveness and optimum jet velocity for a plane jet air curtain used to restrict cold room infiltration

The effectiveness of a 1.0 m wide air curtain fitted over a 1.36 m wide entrance to a cold store has been evaluated. It was shown that careful setting up of the air curtain (adjusting the jet velocity and angle) was needed, this achieved an effectiveness of 0.77 compared to the initial value of only 0.31 as set by the installer. An analytical model to predict the optimum jet velocity was compared to measured data. It is important to choose the correct safety factor (an increase in the jet velocity) for this model, as an effectiveness of between 0.37 and 0.70 could be produced using the range of safety factors found in the literature. A 2D computational fluid dynamics (CFD) model predicted a maximum effectiveness of 0.84 and showed how the effectiveness of the curtain was related to the shape of the jet and how this varied with jet velocity and door open duration.     

Thermoeconomic optimization of a two stage combined refrigeration system: a finite-time approach

A finite-time thermoeconomic performance analysis based on a new kind of optimization criterion has been carried out for a two-stage endoreversible combined refrigeration cycle model. The optimal performances and design parameters that maximize the objective function (cooling load per total cost) are investigated. In this context, the optimal temperatures of the working fluids, the optimum performance coefficient, the optimum specific cooling load and the optimal distribution of the heat exchanger areas are determined in terms of technical and economical parameters. The effects of the economical parameter that characterizes the investment and energy consumption costs on the general and the optimal performances have been discussed.     

Performance parameters for the design of a combined refrigeration and electrical power cogeneration system

This paper discusses the conservation of energy in a cogeneration system. A steam power cycle (Rankine) produces electrical power 2 MW and steam is bleeded off from the turbine at 7 bar to warm a factory or units of buildings during the winter or to supply a steam ejector refrigeration cycle to air-conditioning the same area during the summer. In the summer this system can be as alternative solution instead of absorption. Certainly the ejector refrigeration unit is more economical than absorption unit. The ratio of electrical power/heat is varied into the region (0.1–0.4) and the evaporator temperature of the ejector cycle is varied into the region (10–16 °C). A computer program has been developed for the study of performance parameters of the cogeneration system.