Surface modification of Al–Zn–Mg alloy by combined electrical discharge machining with ball burnish machining

The study investigated the feasibility of modifying the surface of Al–Zn–Mg alloy by a combined process of electric discharge machining (EDM) with ball burnish machining (BBM). A novel process that integrates EDM and BBM is also developed to conduct experiments on an electric discharge machine. Machining parameters of the combined process, including machining polarity, peak current, power supply voltage, and the protruding of ZrO₂, are chosen to determine their effects on material removal rate, surface roughness and the improvement ratio of surface roughness. In addition, the extent to which the combined process affects surface modification is also evaluated by microhardness and corrosion resistance tests. Experimental results indicate that the combined process of EDM with BBM can effectively improve the surface roughness to obtain a fine-finishing and flat surface. The micropores and cracks caused from EDM are eliminated during the process as well. Furthermore, such a process can reinforce and increase the corrosion resistance of the machined surface after machining.     

超声振动磨削放电复合加工SiCp／Al试验研究

针对SiCp／Al的加工,提出一种超声振动磨削放电复合加工的方法．从加工效率、加工稳定性及表面质量等方面与电火花加工进行了对比试验研究。分析了两种加工方法的脉冲宽度和峰值电流对加工速度和表面粗糙度的影响,结果表明：电火花加工的表面粗糙度平均值为尺04．5μm,超声振动磨削放电复合加工的表面粗糙度平均值为Ra2μm：超声振动磨削放电复合加工的稳定性比电火花加工好,但加工速度较低。通过扫描电镜对两种加工方法下零件表面形貌和重熔层进行了观测,对试件表面进行了X射线衍射分析,表明采用超声振动磨削放电复合加工SiCp／Al复合材料可获得较好的表面质量。     

Machining characteristics of magnetic force-assisted EDM

The gap conditions of electrical discharge machining (EDM) would significantly affect the stability of machining progress. Thus, the machining performance would be improved by expelling debris from the machining gap fast and easily. In this investigation, magnetic force was added to a conventional EDM machine to form a novel process of magnetic force-assisted EDM. The beneficial effects of this process were evaluated. The main machining parameters such as peak current and pulse duration were chosen to determine the effects on the machining characteristics in terms of material removal rate (MRR), electrode wear rate (EWR), and surface roughness. The surface integrity was also explored by a scanning electron microscope (SEM) to evaluate the effects of the magnetic force-assisted EDM. As the experimental results suggested that the magnetic force-assisted EDM facilitated the process stability. Moreover, a pertinent EDM process with high efficiency and high quality of machined surface could be accomplished to satisfy modern industrial applications.     

Machining performance on hybrid process of abrasive jet machining and electrical discharge machining

To develop a hybrid process of abrasive jet machining (AJM) and electrical discharge machining (EDM),the effects of the hybrid process parameters on machining performance were comprehensively investigated to confirm the benefits of this hybrid process.The appropriate abrasives delivered by high speed gas media were incorporated with an EDM in gas system to construct the hybrid process of AJM and EDM,and then the high speed abrasives could impinge on the machined surface to remove the recast layer caused by EDM process to increase the efficiency of material removal and reduce the surface roughness.In this study,the benefits of the hybrid process were determined as the machining performance of hybrid process was compared with that of the EDM in gas system.The main process parameters were varied to explore their effects on material removal rate,surface roughness and surface integrities.The experimental results show that the hybrid process of AJM and EDM can enhance the machining efficiency and improve the surface quality.Consequently,the developed hybrid process can fit the requirements of modern manufacturing applications.     

Investigation of the spark cycle on material removal rate in wire electrical discharge machining of advanced materials

The development of new, advanced engineering materials and the need for precise and flexible prototypes and low-volume production have made the wire electrical discharge machining (EDM) an important manufacturing process to meet such demands. This research investigates the effect of spark on-time duration and spark on-time ratio, two important EDM process parameters, on the material removal rate (MRR) and surface integrity of four types of advanced material: porous metal foams, metal bond diamond grinding wheels, sintered Nd-Fe-B magnets, and carbon–carbon bipolar plates. An experimental procedure was developed. During the wire EDM, five types of constraints on the MRR due to short circuit, wire breakage, machine slide speed limit, and spark on-time upper and lower limits are identified. An envelope of feasible EDM process parameters is generated for each work-material. Applications of such a process envelope to select process parameters for maximum MRR and for machining of micro features are discussed. Results of Scanning Electron Microscopy (SEM) analysis of surface integrity are presented.     

Optimization of machining parameters in magnetic force assisted EDM based on Taguchi method

A versatile process of electrical discharge machining (EDM) using magnetic force assisted standard EDM machine has been developed. The effects of magnetic force on EDM machining characteristics were explored. Moreover, this work adopted an L18 orthogonal array based on Taguchi method to conduct a series of experiments, and statistically evaluated the experimental data by analysis of variance (ANOVA). The main machining parameters such as machining polarity (P), peak current (I_p), pulse duration (τ_p), high-voltage auxiliary current (I_H), no-load voltage (V) and servo reference voltage (S_v) were chosen to determine the EDM machining characteristics such as material removal rate (MRR) and surface roughness (SR). The benefits of magnetic force assisted EDM were confirmed from the analysis of discharge waveforms and from the micrograph observation of surface integrity. The experimental results show that the magnetic force assisted EDM has a higher MRR, a lower relative electrode wear ratio (REWR), and a smaller SR as compared with standard EDM. In addition, the significant machining parameters, and the optimal combination levels of machining parameters associated with MRR as well as SR were also drawn. Moreover, the contribution for expelling machining debris using the magnetic force assisted EDM would be proven to attain a high efficiency and high quality of surface integrity to meet the demand of modern industrial applications.     

Studies on electric-discharge machining of non-contact seal face grooves

In this paper, the electric-discharge machining (EDM) of non-contact seal grooves was studied. Two types of material, namely: tungsten carbide and silicon carbide were tested by EDM due to their hard machining behaviors. The geometry of seal grooves is another reason why grinding or other precision machining processes cannot be applied. Four parameters of EDM processes were studied, namely: electrode material, pulse duration, discharge current, and polarity. According to experimental results, the optimal process parameters were obtained based on the specimen’s qualities, such as surface roughness and depth of cut. An industrial example was also studied in the final stage of the proposed paper.     

The use of the orthogonal array with grey relational analysis to optimize the electrical discharge machining process with multiple performance characteristics

In this paper a new approach for the optimization of the electrical discharge machining (EDM) process with multiple performance characteristics based on the orthogonal array with the grey relational analysis has been studied. A grey relational grade obtained from the grey relational analysis is used to solve the EDM process with the multiple performance characteristics. Optimal machining parameters can then be determined by the grey relational grade as the performance index. In this study, the machining parameters, namely workpiece polarity, pulse on time, duty factor, open discharge voltage, discharge current, and dielectric fluid are optimized with considerations of multiple performance characteristics including material removal rate, surface roughness, and electrode wear ratio. Experimental results have shown that machining performance in the EDM process can be improved effectively through this approach.     

混粉电火花加工技术在粗加工中的应用研究

在对混粉电火花加工机理进行系统研究的基础上，对混粉电火花粗加工中的加工效率和加工表面粗糙度进行了实验研究。结果表明，通过合理选择放电参数，混粉电火花加工在相近加工表面粗糙度时，能显著提高加工效率，从而为混粉电火花加工技术在粗加工中应用提供依据。     

A comparative experimental study of machining characteristics in vibratory, rotary and vibro-rotary electro-discharge machining

This paper compares the effects of high- and low-frequency forced axial vibration of the electrode, rotation of the electrode, and combinations of these methods in respect of material removal rate (MRR), tool wear rate and surface roughness in die sinking electro-discharge machining (EDM) with a flat electrode (planing mode).

The results of the combined states of rotation and vibration at high and low frequency (vibro-rotary EDM) are compared in order to establish which combinations are most appropriate to different machining regimes (finishing, semi-finishing and roughing). It is found that the combination of high-frequency vibration and rotation of the electrode is effective in attaining a high MRR at a specified surface roughness (R_a). This case is modelled by stepwise linear regression. The significant parameters are found by analysis of variance (ANOVA) and the optimum machining parameter settings are obtained using overlay contour plots. The advantages of vibration and rotation are seen to combine in this new process when employed for die sinking EDM with a flat electrode.     

电火花诱导烧蚀磨削修整复合加工方法研究

针对放电诱导烧蚀加工在高效加工的同时易在工件表面产生巨大烧蚀坑的问题,提出了电火花诱导烧蚀磨削修整复合加工方法。对钛合金TC4进行了电火花加工、烧蚀加工、诱导烧蚀磨削修整复合加工的对比实验,研究机械磨削作用对烧蚀性能的影响。在钛合金烧蚀加工实验过程中,用复合机械磨头进行修整能显著提高加工效率,达到1107 mm3/min,是同等条件下电火花加工的6.77倍、烧蚀加工的1.27倍。由于存在机械磨削修整作用,可在线去除烧蚀产物,露出基体材料,工件表面粗糙度优于烧蚀加工,甚至优于同等电参数下的电火花加工,达到了在获得高效加工的同时提升表面质量的目的。     

石墨电极电火花加工性能的影响因素分析

影响石墨电极电火花加工性能的因素很多，各因素的合理配合对电火花加工特性有重要的影响。分析了主轴性能、脉冲电源及智能控制、工作液、电参数和加工极性选择等对石墨电极加工性能的影响，为生产实践提供了理论依据。     

Surface modifications of Al–Zn–Mg alloy using combined EDM with ultrasonic machining and addition of TiC particles into the dielectric

This study proposes a novel combined process that integrates electrical discharge machining (EDM) and ultrasonic machining (USM) to investigate the machining performance and surface modification on Al–Zn–Mg alloy. In the experiment, TiC particles were added into the dielectric to explore the influence of the combined process on the material removal rate (MRR), the relative electrode wear ratio (REWR), the surface roughness and the expansion of the machined hole. The elemental distributions of titanium and carbon on the cross-section were quantitatively determined using an electron probe micro-analyzer (EPMA). Microhardness and wear resistance tests were conducted to evaluate the modifications on the machined surface caused by the combined process. The experimental results show that the combined process was associated with improved machining performance. The combination of EDM with USM yielded an alloyed layer that improved the hardness and wear resistance of the machined surface.     

Machining Performance and Surface Integrity of AISI D2 Die Steel Machined Using Electrical Discharge Surface Grinding Process

The aim of this study is to establish optimum machining conditions for EDSG of AISI D2 die steel through an experimental investigation using Taguchi Methodology. To achieve combined grinding and electrical discharge machining, metal matrix composite electrodes (Cu-SiC_p) were processed through powder metallurgy route. A rotary spindle attachment was developed to perform the EDSG experimental runs on EDM machine. Relationships were developed between various input parameters such as peak current, speed, pulse-on time, pulse-off time, abrasive particle size, and abrasive particle concentration, and output characteristics such as material removal rate and surface roughness. The optimized parameters were further validated by conducting confirmation experiments.     

EDM-Future Steps towards the Machining of Ceramics

As a thermal machining process, Electro-Discharge Machining (EDM) provides a means of machining ceramic materials, irrespective of their hardness and strength, provided that their electrical conductivity values are of the order of 0.01 S/cm (100 Ω*cm), as is sometimes the case with engineering ceramics.EDM achieves high removal rates as compared with traditional techniques for the machining of these materials. The lack of correlation between the cutting rate, the surface roughness and the physical material parameters confirms that the removal mechanisms for machining conductive ceramics differ from those involved in metal machining. In order to ensure process stability, the grain structure evinced by the ceramic must be as fine and homogeneous as possible. The complex workpiece geometries and high accuracy to shape and size attainable with electro-discharge machining particularly favour its use in toolmaking.     

超声振动辅助气中放电加工实验分析

超声振动辅助气中放电加工技术避免了常用的煤油等工作液作为介质带来的环境污染问题，具有工作环境清洁、适用范围广、加工效率高、工具电极简单等优点。实验研究了电压、脉冲宽度、峰值电流、超声振幅及气体介质压力等参数对加工效率、工件表面粗糙度及电极损耗的影响．并对试验结果进行了分析。     

Study on the characteristics of electrical discharge machining using dielectric with surfactant

This research mainly explores the influence of surfactant on the characteristics of electrical discharge machining (EDM) process on mold steel (SKD61). In this study, particle agglomeration is reduced after surfactant molecules cover the surface of debris and carbon dregs in kerosene solution. Debris is evenly dispersed in dielectric to improve the effects of carbon accumulation and dreg discharge, and reduce the unstable concentrated discharge. The EDM parameters, such as peak current, pulse duration, open voltage and gap voltage are studied in this paper. The experimental results show that after the addition of Span 20 (30 g/L) to dielectric, the conductivity of dielectric is increased. The machining efficiency is thus increased due to a shorter relay time of electrical discharge. When proper working parameters are chosen, the material removal rate is improved by as high as 40–80%. Although the improvement of surface roughness is not obvious, the surface roughness is not deteriorated since the material removal rate is great.     

电火花线切割加工铜钨合金切缝宽度及加工精度影响因素研究

铜钨合金是一种广泛应用于精密及难加工材料电火花成形加工的低损耗电极材料。在窄缝、清棱清角、高纵横比等结构的电极加工中,低速走丝电火花线切割加工较传统加工方法具有一定的优势。通过单因素实验研究了电火花线切割加工参数对铜钨合金粗加工切缝宽度、加工速度及表面粗糙度的影响规律,为实际加工提供理论指导。     

Investigation of the effects of electrode orientation and fluid flow rate in near-dry EDM milling

This research investigates the effects of electrode lead and tilt angles and dielectric fluid flow rate on material removal rate, tool electrode wear ratio, and surface roughness in near-dry electrical discharge machining (EDM) milling process. Computational fluid dynamics (CFD) model is developed to predict the dielectric fluid flow rate and qualitatively compare with the experimentally measured EDM material removal rate. The optimum lead angle, which maximized material removal rate and minimized tool electrode wear ratio, was found. The decrease in the lead angle has a negative effect on the roughness of machined surface. The increase in tilt angle reduces the material removal rate and increases the tool electrode wear ratio. The change in tilt angle does not have a significant effect on the surface roughness and can be used to prevent gouging in finishing EDM milling. This study shows that the material removal rate is linearly proportional to the mass flow rate of air and kerosene mixture, the tool electrode wear ratio is inversely related to the mass flow rate of air and kerosene mixture, and the average surface roughness does not have a good correlation with the flow rate of the mixture.     

Evolutionary programming method for modeling the EDM parameters for roughness

The method of electrical discharge machining (EDM), one of the processing methods based on non-traditional manufacturing procedures, is gaining increased popularity, since it does not require cutting tools and allows machining involving hard, brittle, thin and complex geometry.

By using different EDM parameters (current, pulse on-time, pulse off-time, arc voltage), the R_a (μm) roughness value as a result of application of a number of copper electrode-hardened powder metals (cold work tool steel) to a work piece has been investigated, in this study. At the same time, roughness values obtained from the experiments that have been modeled by using the genetic expression programming (GEP) method and a mathematical relationship has been suggested between the GEP model and surface roughness and parameters affecting it. Moreover, EDM has been used by applying copper, copper–tungsten (W–Cu) and graphite electrodes to the same material with experimental parameters designed in accordance with the Taguchi method. Results obtained from this study have been compared among each other and similar studies in the literature.