Hydrogen generation from catalytic hydrolysis of alkaline sodium borohydride solution using attapulgite clay-supported Co-B catalyst

An attapulgite clay-supported cobalt-boride (Co-B) catalyst used in portable fuel cell fields is prepared in this paper by impregnation-chemical reduction method. The cost of attapulgite clay is much lower compared with some other inert carriers, such as activated carbon and carbon nanotube. Its microstructure and catalytic activity are analyzed in this paper. The effects of NaOH concentration, NaBH₄ concentration, reacting temperature, catalyst loadings and recycle times on the performance of the catalysts in hydrogen production from alkaline NaBH₄ solutions are investigated. Furthermore, characteristics of these catalysts are carried out in SEM, XRD and TEM analysis. The high catalytic activity of the catalyst indicates that it is a promising and practical catalyst. Activation energy of hydrogen generation using such catalysts is estimated to be 56.32 kJ mol⁻¹. In the cycle test, from the 1st cycle to the 9th cycle, the average hydrogen generation rate decreases gradually from 1.27 l min⁻¹ g⁻¹ Co-B to 0.87 l min⁻¹ g⁻¹ Co-B.     

Electroless-deposited Co–P catalysts for hydrogen generation from alkaline NaBH4 solution

Cobalt–phosphorus (Co–P) catalysts, which were electroless deposited on Cu sheet, have been investigated for hydrogen generation from alkaline NaBH₄ solution. The microstructures of the as-prepared Co–P catalysts and their catalytic activities for hydrolysis of NaBH₄ are analyzed in relation to pH value, NaH₂PO₂ concentration, and the deposition time. Experimental results show that the Co–P catalyst formed in the bath solution with pH value of 12.5, NaH₂PO₂ concentration of 0.8 M, and the deposition time no more than 6 min presents the highest hydrogen generation rate of 1846 mL min⁻¹ g⁻¹. Furthermore, the as-prepared catalyst also shows good cycling capability and the corresponding activation energy is calculated to be 48.1 kJ mol⁻¹. The favorable catalytic performance of the electroless-deposited Co–P catalysts indicates their potential application for quick hydrogen generation from hydrolysis of NaBH₄ solution.     

Hydrogen generation from sodium borohydride solution using a ruthenium supported on graphite catalyst

The catalyst with high activity and durability plays a crucial role in the hydrogen generation systems for the portable fuel cell generators. In the present study, a ruthenium supported on graphite catalyst (Ru/G) for hydrogen generation from sodium borohydride (NaBH₄) solution is prepared by a modified impregnation method. This is done by surface pretreatment with NH₂ functionalization via silanization, followed by adsorption of Ru (III) ion onto the surface, and then reduced by a reducing agent. The obtained catalyst is characterized by transmission electron microscope (TEM) and X-ray photoelectron spectroscopy (XPS). Very uniform Ru nanoparticles with sizes of about 10 nm are chemically bonded on the graphite surface. The hydrolysis kinetics measurements show that the concentrations of NaBH₄ and NaOH all exert considerable influence on the catalytic activity of Ru/G catalyst towards the hydrolysis reaction of NaBH₄. A hydrogen generation rate of 32.3 L min⁻¹ g⁻¹ (Ru) in a 10 wt.% NaBH₄ + 5 wt.% NaOH solution has been achieved, which is comparable to other noble catalysts that have been reported.     

Catalytic hydrolysis of sodium borohydride by a novel nickel–cobalt–boride catalyst

With the aim of designing an efficient hydrogen generator for portable fuel cell applications nickel–cobalt–boride (Ni–Co–B) catalysts were prepared by a chemical reduction method and their catalytic hydrolysis reaction with alkaline NaBH₄ solution was studied. The performance of the catalysts prepared from NaBH₄ solution with NaOH, and without NaOH show different hydrogen generation kinetics. The rate of hydrogen generation was measured using Ni–Co–B catalyst as a function of the concentrations of NaOH and NaBH₄, as well as the reaction temperature, in the hydrolysis of alkaline NaBH₄ solution. The hydrogen generation rate increases for lower NaOH concentrations in the alkaline NaBH₄ solution and decreases after reaching a maximum at 15 wt.% of NaOH. The hydrogen generation rate is found to be constant with respect to the concentration of NaBH₄ in the alkaline NaBH₄ solution. The activation energy for hydrogen generation is found to be 62 kJ mol⁻¹, which is comparable with that of hydrogen generation by a ruthenium catalyst.     

Hydrogen generation by hydrolysis of ammonia borane with a nanoporous cobalt-tungsten-boron-phosphorus catalyst supported on Ni foam

In this study, quaternary cobalt-tungsten-boron-phosphorus porous particles supported on Ni foam (Co-W-B-P/Ni), which are prepared through ultrasonification-assisted electroless deposition route, have been investigated as the catalyst for hydrogen generation (HG) from hydrolysis of ammonia borane (NH₃BH₃, AB). Compared with Ni-supported binary Co-B and ternary Co-W-B catalysts, the as-synthesized Co-W-B-P/Ni shows a higher HG rate. To optimize the preparation parameters, the molar ratio of NaBH₄/NaH₂PO₂·H₂O (B/P) and the concentration of Na₂WO₄·2H₂O (W) have been investigated and the catalyst prepared with B/P value of 1.5 and W concentration of 5 g L⁻¹ shows the highest activity. The results of kinetic studies show that the catalytic hydrolysis of AB is first order with respect to the catalyst and AB concentrations. By using the quaternary catalyst with a concentration of 0.5 wt % AB, a HG rate of 4.0 L min⁻¹ g⁻¹ is achieved at 30 °C. Moreover, the apparent activation energy for the quaternary catalyst is determined to be 29.0 kJ mol⁻¹, which is comparable to that of noble metal-based catalysts. These results indicate that the Co-W-B-P/Ni is a promising low-cost catalyst for on-board hydrogen generation from hydrolysis of borohydride.     

Hydrogen generation utilizing alkaline sodium borohydride solution and supported cobalt catalyst

Supported Co catalysts with different supports were prepared for hydrogen generation (HG) from catalytic hydrolysis of alkaline sodium borohydride solution. As a result, we found that a γ-Al₂O₃ supported Co catalyst was very effective because of its special structure. A maximum HG rate of 220 mL min⁻¹ g⁻¹ catalyst and approximately 100% efficiency at 303 K were achieved using a Co/γ-Al₂O₃ catalyst containing 9 wt.% Co. The catalyst has quick response and good durability to the hydrolysis of alkaline NaBH₄ solution. It is feasible to use this catalyst in hydrogen generators with stabilized NaBH₄ solutions to provide on-site hydrogen with desired rate for mobile applications, such as proton exchange membrane fuel cell (PEMFC) systems.     

Accurately measuring the hydrogen generation rate for hydrolysis of sodium borohydride on multiwalled carbon nanotubes/Co–B catalysts

Multiwalled carbon nanotubes supported cobalt–boron catalysts (Co–B/MWCNT) were developed via the chemical reduction of aqueous sodium borohydride with cobalt chloride for catalytic hydrolysis of alkaline NaBH₄ solution. The hydrogen generation (HG) rates were measured on an improved high-accuracy, low-cost and automatic HG rate measurement system based on the use of an electronic balance with high accuracy. The HG of Co–B/MWCNT catalyst was investigated as a function of heat treatment, solution temperature, Co–B loading and supporting materials. The catalyst was mesoporous structured and showed lower activation energy of 40.40 kJ mol⁻¹ for the hydrolysis of NaBH₄. The Co–B/MWCNT catalyst was not only highly active to achieve the average HG rate of 5.1 l min⁻¹ g⁻¹ compared to 3.1 l min⁻¹ g⁻¹ on Co–B/C catalyst under the same conditions but also reasonably stable for the continuous hydrolysis of NaBH₄ solution.     

Effects of electroless deposition conditions on microstructures of cobalt–phosphorous catalysts and their hydrogen generation properties in alkaline sodium borohydride solution

Cobalt–phosphorous (Co–P) catalysts with a high hydrogen generation rate in alkaline sodium borohydride (NaBH₄) solution are developed by electroless deposition. The microstructures of the Co–P catalysts and their catalytic activities for hydrolysis of NaBH₄ are analyzed as a function of the electroless deposition conditions such as the pH and temperature of the Co–P bath. The electroless-deposited Co–P catalysts are composed of nano-crystalline Co and amorphous Co–P. The size of the nano-crystalline Co particles dispersed in amorphous Co–P matrix depends largely on the electroless deposition conditions. Moreover, Co–P catalysts with finer crystalline Co exhibit a higher hydrogen generation rate. In particular, the Co–P catalysts formed in a pH 12.5 bath at 60–70 °C exhibit the best hydrogen generation rate of 3300 ml min⁻¹ g⁻¹-catalyst in 1 wt.% NaOH + 10 wt.% NaBH₄ solution at 30 °C, which is 60 times faster than that obtained with a Co catalyst.     

Carbon-supported cobalt catalyst for hydrogen generation from alkaline sodium borohydride solution

Low cost transition metal catalysts with high performance are attractive for the development of on-board hydrogen generation systems by catalytic hydrolysis of sodium borohydride (NaBH₄) in fuel cell fields. In this study, hydrogen production from alkaline NaBH₄ via hydrolysis process over carbon-supported cobalt catalysts was studied. The catalytic activity of the supported cobalt catalyst was found to be highly dependent on the calcination temperatures. The hydrogen generation rate increases with calcination temperatures in the range of 200–400 °C, but a high calcination temperature above 500 °C led to markedly decreased activity. X-ray diffraction patterns reveal that the catalysts experience phase transition from amorphous Co–B to crystalline cobalt hydroxide with increase in calcination temperatures. The reaction performance is also dependent on the concentration of NaBH₄, and the hydrogen generation rate increases for lower NaBH₄ concentrations and decreases after reaching a maximum at 10 wt.% of NaBH₄.     

Fabrication of porous Co–Ni–P catalysts by electrodeposition and their catalytic characteristics for the generation of hydrogen from an alkaline NaBH4 solution

Porous Co–Ni–P catalysts were made on Cu substrates by electrodeposition in order to generate hydrogen from an alkaline sodium borohydride (NaBH₄) solution. We investigated the effects of the cathodic current density and the electrodeposition time on the surface morphology and chemical composition of the Co–Ni–P catalysts. The hydrogen generation characteristics from an alkaline NaBH₄ solution using these catalysts in an alkaline NaBH₄ solution were then investigated. The cathodic current density significantly affected the growth behavior and catalytic properties of the Co–Ni–P electrodeposits. Co–Ni–P catalysts grew two-dimensionally at a low cathodic current density of 0.01 A cm⁻². By contrast, at a cathodic current density of more than 0.05 A cm⁻², three-dimensional growth of the catalysts occurred due to the large cathodic overpotential. In addition, the rates of hydrogen generation were found to be higher for the three-dimensional catalysts than the two-dimensional catalysts. Three-dimensional growth of the Co–Ni–P catalysts continued as the electrodeposition time increased from 1 to 10 min at a cathodic current density of 0.1 A cm⁻². The surface areas of the three-dimensional Co–Ni–P catalysts increased gradually with electrodeposition time, resulting in their catalytic efficiency for the hydrolysis of NaBH₄ being improved. The hydrogen generation rate was also influenced by the concentrations of the NaOH and NaBH₄ in the alkaline NaBH₄ solution. The hydrogen generation rate increased gradually with increasing NaOH concentration. By contrast, there was an optimum concentration of NaBH₄, above which the hydrogen generation rate decreased. Finally, the hydrogen generation rate from Co–Ni–P catalysts was found to decrease due to the precipitation of by-products.     

Promoting effect of W doped in electrodeposited Co–P catalysts for hydrogen generation from alkaline NaBH4 solution

Amorphous Co–W–P catalysts were prepared on Cu substrates by electrodeposition, which have been investigated as the catalyst for hydrogen generation from alkaline NaBH₄ solution. The surface morphology and chemical composition of the as-prepared Co–W–P catalysts were analyzed in relation to the cathodic current density and the electrodeposition time. The hydrogen generation rate for the optimized Co–W–P catalyst is measured to be 5000 mL (min g-catalyst)⁻¹ at 30 °C. From hydrogen generation tests in solutions with the various concentrations of NaBH₄ and NaOH, there were optimum concentrations for both NaBH₄ and NaOH, above or below which the hydrogen generation rate decreased. Furthermore, the as-prepared catalyst also showed good cycling capability and the activation energy for hydrolysis of NaBH₄ by the Co–W–P catalyst was calculated to be 22.8 kJ/mol, which was lower than other reported Co-based catalysts.     

Simple and fast fabrication of polymer template-Ru composite as a catalyst for hydrogen generation from alkaline NaBH4 solution

Polymer template-Ru composite (Ru/IR-120) catalyst was prepared using a simple and fast method for generating hydrogen from an aqueous alkaline NaBH₄ solution. The hydrogen generation rate was determined as a function of solution temperature, NaBH₄ concentration, and NaOH (a base-stabilizer) concentration. The maximum hydrogen generation rate reached 132 ml min⁻¹ g⁻¹ catalyst at 298 K, using a Ru/IR-120 catalyst that contained only 1 wt.% Ru. The catalyst exhibits a quick response and good durability during the hydrolysis of alkaline NaBH₄ solution. The activation energy for the hydrogen generation reaction was determined to be 49.72 kJ mol⁻¹.     

An effective synthesis route for improving the catalytic activity of carbon-supported Co–B catalyst for hydrogen generation through hydrolysis of NaBH4

A novel method for synthesis of carbon-supported cobalt boride catalyst was developed for hydrogen generation from catalytic hydrolysis of NaBH₄ solution. The activated carbon and carbon black supported catalysts prepared by “reduction–precipitation” method were found to be much more active than those prepared by conventional “impregnation–reduction” method inspite of the same Co content. A maximum hydrogen generation was achieved using carbon black supported Co–B, which lowers the activation energy to 56.7 kJ mol⁻¹. The effects of NaOH concentration (1–15 wt.%), NaBH₄ concentration (5–20 wt.%) and reaction temperature (25–40 °C) on the performance of the most active catalyst (Co–B/C_B) were investigated in detail. The results indicated that this catalyst can be used in a hydrogen generator for mobile applications such as PEMFC systems due to its high catalytic activity and simple preparation method.     

Hydrogen generation by hydrolysis of NaBH4 with efficient Co–P–B catalyst: A kinetic study

Amorphous catalyst alloy powders in form of Co–P, Co–B, and Co–P–B have been synthesized by chemical reduction of cobalt salt at room temperature for catalytic hydrolysis of NaBH₄. Co–P–B amorphous powder showed higher efficiency as a catalyst for hydrogen production as compared to Co–B and Co–P. The enhanced activity obtained with Co–P–B (B/P molar ratio = 2.5) powder catalyst can be attributed to: large active surface area, amorphous short range structure, and synergic effects caused by B and P atoms in the catalyst. The roles of metalloids (B and P) in Co–P–B catalyst have been investigated by regulating the B/P molar ratio in the starting material. Heat-treatment at 773 K in Ar atmosphere causes the decrease in hydrogen generation rate due to partial Co crystallization in Co–P–B powder. Kinetic studies on the hydrolysis reaction of NaBH₄ with Co–P–B catalyst reveal that the concentrations of both NaOH and catalyst have positive effects on hydrogen generation rate. Zero order reaction kinetics is observed with respect to NaBH₄ concentration with high hydride/catalyst molar ratio while first order reaction kinetics is observed at low hydride/catalyst molar ratio. Synergetic effects of B and P atoms in Co–P–B catalyst lowers the activation energy (32 kJ mol⁻¹) for hydrolysis of NaBH₄. The stability, reusability, and durability of Co–P–B catalyst have also been investigated and reported in this work. It has been found that by using B/P molar ratio of 2.5 in Co–P–B catalyst, highest H₂ generation rate of about ∼4000 ml min⁻¹ g⁻¹ can be achieved. This can generate 720 W for Proton Exchange Membrane Fuel Cells (0.7 V): which is necessary for portable devices.     

Amorphous cobalt–boron/nickel foam as an effective catalyst for hydrogen generation from alkaline sodium borohydride solution

Low cost and catalytically effective transition metal catalysts are of interest for the development of on-board hydrogen generation systems for fuel-cell vehicles. In the present study a modified electroless plating method was developed for the preparation of amorphous Co–B catalyst supported on Ni foam. Compared to the conventional electroless plating method, the newly developed method is more effective and produces Co–B catalyst with much higher catalytic activity. The catalytic activity of the supported Co–B catalyst was found to be highly dependent on the plating times and calcination conditions. Through optimization of these preparation conditions we were able to prepare a catalyst capable of a hydrogen generation rate of 11 l (min g)⁻¹ (catalyst) in a 20 wt.% NaBH₄ + 10 wt.% NaOH solution. Preliminary phase analyses and microstructure characterization were performed to understand the effects of preparation conditions on the catalytic activity of the Co–B catalyst.     

Hydrogen generation from hydrolysis of sodium borohydride using Ni–Ru nanocomposite as catalysts

Magnetic nickel–ruthenium based catalysts on resin beads for hydrogen generation from alkaline NaBH₄ solutions were synthesized with combined methods of chemical reduction and electroless deposition. Factors, such as solution temperature, NaBH₄ loadings, and NaOH concentration, on performance of these catalysts on hydrogen production from alkaline NaBH₄ solutions were investigated. Furthermore, characteristics of these nickel–ruthenium based catalysts were carried out by using various instruments, such as SEM/EDS, XPS, SQUID VSM and BET. These catalysts can be easily recycled from spent NaBH₄ solution with permanent magnets owing to their intrinsic soft ferromagnetism and, therefore, reducing the operation cost of the hydrogen generation process. A rate of hydrogen evolution as high as ca. 400 mL min⁻¹ g⁻¹ could be reached at 35 °C in 10 wt% NaBH₄ solution containing 5 wt% NaOH using Ni–Ru/50WX8 catalysts. Activation energy of hydrogen generation using such catalysts is estimated at 52.73 kJ mol⁻¹.     

High-performance cobalt–tungsten–boron catalyst supported on Ni foam for hydrogen generation from alkaline sodium borohydride solution

Low cost and catalytically effective transition metal catalysts are highly wanted in developing on-demand hydrogen generation system for practical onboard application. By using a modified electroless plating method, we have prepared a robust Co–W–B amorphous catalyst supported on Ni foam (Co–W–B/Ni foam catalyst) that is highly effective for catalyzing hydrogen generation from alkaline NaBH₄ solution. It was found that the plating times, calcination temperature, NaBH₄ and NaOH concentrations all exert considerable influence on the catalytic effectiveness of Co–W–B/Ni foam catalyst towards the hydrolysis reaction of NaBH₄. Via optimizing these preparation and reaction conditions, a hydrogen generation rate of 15 L/min g (Co–W–B) has been achieved, which is comparable to the highest level of noble metal catalyst. In consistent with the observed pronounced catalytic activity, the activation energy of the hydrolysis reaction using Co–W–B/Ni foam catalyst was determined to be only 29 kJ/mol. Based on the phase analysis and structural characterization results, the mechanism underlying the observed dependence of catalytic effectiveness on the calcination temperature was discussed.     

A direct measurement of the heat evolved during the sodium and potassium borohydride catalytic hydrolysis

NaBH₄ and KBH₄ hydrolysis reactions (BH₄⁻ + 4H₂O → B(OH)₄⁻ + 4H₂), which can be utilized as a source of high purity hydrogen and be easily controlled catalytically, are exothermic processes. Precise determination of the evolved heat is of outmost importance for the design of the reactor for hydrogen generation. In this work we present an efficient calorimetric method for the direct measurement of the heats evolved during the catalyzed hydrolysis reaction. A modified Setaram Titrys microcalorimeter was used to determine the heat of hydrolysis in a system where water is added to pure solid NaBH₄ or KBH₄ as well as to solid NaBH₄ or KBH₄ mixed with a Co-based solid catalyst. The measured heats of NaBH₄ hydrolysis reaction were: −236 kJ mol⁻¹, −243 kJ mol⁻¹, −235 kJ mol⁻¹, and −236 kJ mol⁻¹, without catalyst and in the presence of Co nanoparticles, CoO and Co₃O₄, respectively. In the case of the KBH₄ hydrolysis reaction, the measured heats were: −220 kJ mol⁻¹, −219 kJ mol⁻¹, −230 kJ mol⁻¹, and −228 kJ mol⁻¹, without catalyst and with Co nanoparticles, CoO and Co₃O₄, respectively. Also, a comparison was made with an aqueous solution of CoCl₂·6H₂O used as catalyst in which case the measured heats were −222 kJ mol⁻¹ and −196 kJ mol⁻¹ for NaBH₄ and KBH₄ hydrolysis, respectively. The influence of solid NaOH or KOH additions on the heat of borohydride hydrolysis has been investigated as well.     

A multifactor study of catalyzed hydrolysis of solid NaBH4 on cobalt nanoparticles: Thermodynamics and kinetics

In the present work, hydrogen generation through hydrolysis of a NaBH_4(s)/catalyst_(s) solid mixture was realized for the first time as a solid/liquid compact hydrogen storage system using Co nanoparticles as a model catalyst. The performance of the system was analysed from both the thermodynamic and kinetic points of view and compared with the classical catalyzed hydrolysis of a NaBH₄ solution. The kinetic analysis of the NaBH_4(s)/catalyst_(s)/H₂O_(l) system shows that the reaction is first order with respect to the catalyst concentration, and the activation energy equal to 35 kJ mol_NaBH4⁻¹. Additionally, calorimetric measurements of the heat evolved during the hydrolysis of NaBH₄ solutions evidence the global process energy (−217 kJ mol_NaBH4⁻¹). Characterization of the cobalt nanoparticles before and after the hydrolysis associated with the calorimetric measurements suggests the “in situ” formation of a catalytically active Co_xB phase through “reduction” of an outer protective oxide layer that is regenerated at the end of reaction.     

Controllable hydrogen generation by use smart hydrogel reactor containing Ru nano catalyst and magnetic iron nanoparticles

In this study, p(AMPS) hydrogels are synthesized from 2-acrylamido-2-methyl-1-propansulfonic acid (AMPS) via a photo polymerization technique. The hydrogels are used as template for metal nanoparticles and magnetic ferrite nanoparticles, and also as a catalysis vessel in the generation of hydrogen from the hydrolysis of NaBH₄. Approximately 5 nm Ru (0) and 20-30 nm magnetic ferrite particles are generated in situ inside this p(AMPS) hydrogel network and then used as a catalysis medium in hydrogen production by hydrolysis of sodium boron hydride in a basic medium. With an applied external magnetic field, the hydrogel reactor, containing Ru and ferrite magnetic particles, can be removed from the catalysis medium; providing on-demand generation of hydrogen. The effect of various parameters such as the initial concentration of NaBH₄, the amount of catalyst and temperature on the hydrolysis reaction is evaluated. The activation energy for hydrogen production by Ru (0) nanoparticles is found to be 27.5 kJ mol⁻¹; while the activation enthalpy is 30.4 kJ mol⁻¹. The hydrogen generation rate in presence of 5 wt% NaOH and 50 mg p(AMPS)-Ru catalyst is 8.2 L H₂ min⁻¹ g Ru.