Numerical simulation of square cyclones in small sizes

The idea of using square cyclones was first introduced in early 1990s because of some problems of big conventional (round) cyclones in Circulating Fluidized Bed (CFB) industries, such as huge volume and long start-stop time of cyclones. Now there is this question, in spite of the main reason for making square cyclones, how square cyclones behave in small sizes.In this paper, two small cyclones with the same hydraulic diameter, which one is square and the other one is round, are numerically compared. The Reynolds averaged Navier–Stokes equations with Reynolds Stress Turbulence Model (RSTM) are solved by use of the finite volume method based on the SIMPLE pressure correction algorithm in the computational domain. The Eulerian–Lagrangian computational procedure is used to predict particles tracking in the cyclones. The velocity fluctuations are simulated using the Discrete Random Walk (DRW).The results show that the pressure drop in small square cyclone is less than the pressure drop in small round one. Also at each flow rate collection efficiency of small square cyclone is less than round one, but by increasing flow rate this difference decreases.     

Numerical study of flow field in new design cyclones with different wall temperature profiles: Comparison with conventional ones

In this paper, numerical study of flow field in the new design cyclones with five different wall temperature profiles are investigated. The new design cyclone is based on the idea of improving cyclone collection efficiency and pressure drop by increasing the vortex length. In this paper, the five wall temperature profiles are as follows: (A) cooling with uniform distribution, (B) without temperature change, (C) heating with uniform distribution, (D) incremental linear heating, (E) reduction linear heating. Results are compared in new design and conventional cyclones. The Reynolds averaged Navier–Stokes equations with Reynolds stress turbulence model (RSM) are solved. The Eulerian-Lagrangian computational procedure is used to predict particles tracking in the cyclones. The velocity fluctuations are simulated using the Discrete Random Walk (DRW).Results show that generally, heating the bottom zone of the cyclones can improve the collection efficiency and reduce the pressure drop while heating the top zone of the cyclones marginally affects the flow field. Moreover, cooling the cyclones reduces the efficiency and causes a higher pressure drop. Among five different wall temperature profiles, C and E profiles can increase the efficiency about 8% and profile C reduces the pressure drop by about 9%. The mentioned values in different conditions including particle diameter, flow rate, etc. can be different.     

Modeling and numerical simulation of flow field in three types of standard new design cyclone separators

In this paper, numerical simulation of flow field in three types of standard new design cyclone separators namely 1D2Dn, 1D3Dn and 2D2Dn are investigated. In these standard cyclones, the length of cylindrical top part of the body is equal to 1, 1 and 2 times of the body diameter, respectively; and the length of the cylindrical bottom part is 2, 3 and 2 times of the body diameter. The new design cyclone is based on the idea of improving cyclone collection efficiency and pressure drop by increasing the vortex length. The Eulerian-Lagrangian computational procedure is used to predict particles tracking in the cyclones. The velocity fluctuations are simulated using the Discrete Random Walk (DRW). Results show that among the three standard new design cyclones, cyclone 2D2Dn has the highest efficiency followed by 1D3Dn one with about only 2% lower efficiency. Cyclone 1D2Dn possesses the lowest efficiency among all. Similarly, the highest pressure drop occurs in cyclone 2D2Dn. Cyclones 1D3Dn and 1D2Dn followed 2D2Dn one with a marked difference of about 20%. In result section, the details of the flow field including velocity, pressure contours, turbulence, velocity vectors and particle trajectory will be presented.     

Effects of Exit Tube Diameter on the Flow Field in Cyclones

A number of cyclones with different exit tube diameters have been simulated with CFD in this study. Results show that the exit tube diameter influences not only the velocity magnitude, but also the shape of the velocity profiles within cyclones. Depending on the diameter of the exit tube, the axial velocity profiles can exhibit a either maximum or a minimum on the axis. If the exit tube diameter is small, the central flow has a jet-like appearance. On the other hand, axial velocity dip in the profile can be observed near the center in a cyclone with a large gas exit tube. In addition, the well-known double vortexes, which commonly are present in a cyclone of practical design, do not exist in a cyclone with an excessively large exit tube. Quantitative comparison of velocity distribution shows that the tangential velocity increases as the exit tube diameter is reduced, giving rise to higher particle collection efficiency. Usually, the pressure drop decreases with increasing exit tube diameter. However, if the exit tube size is excessively large, the pressure drop may start to increase. Practically, cyclone with an excessively large exit tube should be avoided.     

Experimental and CFD study on effects of spiral guide vanes on cyclone performance

This paper presents an experimental and numerical study on a tangential inlet cyclone separator with a spiral guide vane which is not often researched. Numerical pressure drop results were in close agreement with the experimental data. The spiral guide vane was also found to considerably influence the velocity distribution, turbulence intensity, pressure drop and collection efficiency in the cyclone. A critical value of spiral guide vane turns appeared below or above which there was a marked increase in collection efficiency, pressure drop, and tangential velocity. Compared to a cyclone with zero spiral guide vane turn, the maximal decrease in collection efficiency in the cyclone with the critical spiral guide vane turns (one turn) was 2% approximately. The maximum-efficiency inlet velocity appeared to exist independent of spiral guide vane turns, as inlet velocity affected the radial distance traveled by the rebounded particles from the inner wall. The analysis of flow field in cyclones indicated that the flow field was improved with the spiral guide vanes employed to some extent. The results presented here may provide a workable reference for the effects of spiral guide vanes on the flow field and corresponding performance in cyclone separators.     

Effects of the prolonged vertical tube on the separation performance of a cyclone

This article aims at the gas flow into the dustbin of conventional cyclones, the prolonged cyclone (attaching a vertical tube at the bottom of the dust outlet) is proposed by some researchers, which can make flow with dust enter into the tube and separate further. The Reynolds stress transport model (RSTM) has been employed to predict the gas flow fields of the conventional and prolonged cyclones. The tangential velocity, axial velocity profiles and turbulent kinetic energy profiles are presented, and the downward flow rates into the dustbin of the three cyclones are compared. The separation performances of these three cyclones are tested. The result indicates that the tangential velocity, axial velocity and turbulent kinetic energy in the dustbin reduce greatly when the prolonged vertical tube attaching into the dust outlet, which can avoid the re-entrainment of already separated dust effectively. Furthermore, the prolonged vertical tube increases the separation space of dusts. The downward flow rate into the dustbin of the prolonged cyclone decreases compared with the conventional cyclone. The experimental results show that the prolonged vertical tube can improve the separation efficiency by a slightly increased pressure drop. However, for an even longer tube, the separation efficiency is slightly reduced. Thus, there is an optimal tube length for a given cyclone.     

Performance evaluation of industrial large-scale cyclone separator with novel vortex finder

This paper presents an experimental and numerical study on an industrial large-scale tangential-inlet cyclone separator with a novel and easy-to-implement vortex finder. The vortex finder was designed with slots on the side wall to improve cyclone performance. The collection efficiency, pressure drop, and interior flow field were analyzed. The proposed device provides an effective gas flow pathway and a coupled swirl-inertia separation mechanism, which eliminates short circuit flows under the bottom inlet of the slotted vortex finder to reduce the swirling intensity and minimize the flow instability in the separator. The pressure drop was reduced up to 27.9% compared to the conventional separator and the maximal increase in collection efficiency was 5.45%. The results presented here may provide a workable reference regarding the effects of vortex finders on improving flow fields and corresponding performance in industrial large-scale cyclone separators.     

Study of inlet temperature effect on single and double inlets cyclone performance

In this paper, a comprehensive study is performed in order to demonstrate the effect of the flow and particle temperature on cyclone performance. Three main characteristics of the low-mass-loading gas-solid cyclone separators, including: pressure drop, particle separation efficiency and natural vortex length are investigated. Eulerian-Lagrangian approach is employed to solve the unsteady Navier-Stokes and energy equations to model the flow of particles. Because of the strong swirling flow in cyclone, Reynolds stress transport model (RSTM) is used to calculate the Reynolds stresses. Numerical simulation is accomplished at a temperature range of 293–700 K and four inlet velocities. Also, a comparison is conducted between two Stairmand high efficiency cyclones with the same dimensions, one with single inlet and the other with double inlets to declare the effect of the second inlet on cyclone performance. The analysis of results shows that the swirling flow becomes weaker for higher temperature cases and thus, flow pressure drop and particle separation efficiency is noticeably decreased. Increasing in temperature causes decrease in natural vortex length. Also, study of natural vortex length is performed for the studied range of temperature.     

Gas-solid separation performance and structure optimization in 3D printed guide vane cyclone separator

Low separation efficiency and large pressure drop are two common problems of cyclones. In this paper, a 3D printed guide vane cyclone separator was designed to study the separation efficiency, turbulent kinetic energy, and particle movement of particle group by experiment and simulation. The results shown that the tangential velocity was the major influence of separating. The bottom of the exhaust pipe was the main region of gas–solid separation and pressure drop. The separation efficiency and pressure drop were positively correlated with the inlet velocity and the particle radius of the fluid. The distribution of turbulent kinetic energy that leaded to the pressure drop loss was concentrated on the inlet of the exhaust pipe. The swirl has external and internal two directions. The optimized cyclone has a longer and narrower blade flow path to obtain higher separation efficiency, especially at low inlet velocity.     

多效旋风分离器压降的实验研究

为了有效提高新型多效旋风分离器对粒径为0.1~3μm颗粒的分离效率,获取该设备的阻力性能,采用实验方法研究该新型多效旋风分离器压降与进口气速的关系,并与Lapple型旋风分离器进行比较。结果表明:进口风速为5~30m/s时,主体直径为0.25m的多效旋风分离器总阻力系数为7.29,其中,一级和二级预分离螺旋管的阻力系数分别为1.04和1.73;主体的阻力系数为4.52。直径为0.25m的Lapple型旋风分离器的阻力系数为7.21。     

Modification of the cyclone separator geometry for improving the performance using Taguchi and CFD approach

ABSTRACT

The cyclone separator performance has been affected by its high-pressure drop. The main geometric ratios such as outlet diameter, inlet width and inlet height and total height have been preferred to reduce the pressure drop and improve the performance of cyclone separator. These standard geometric values have been altered with the aid of design of experiment technique by Taguchi method for reducing the pressure drop. This changed new design produce low-pressure drop compared with the standard cyclone separator. Moreover, the collection efficiency of the new design is high when compared with standard cyclone separator. The pressure drop, Euler number, cut-off diameter and efficiency of the standard and new cyclone separator have been compared with the results of mathematical and computational fluid dynamics technique (CFD). The Reynolds stress turbulence model and discrete phase model have been used for simulating the cyclone separator in CFD. An acceptable agreement has been obtained between these results.     

The effect of magnetic field on the performance of new design cyclone separators

In this paper it is attempted to improve the performance of the gas–solid new design cyclones with imposing magnetic fields. First, Eulerian-Lagrangian method is used to model the flow and to track the solid particles within the new design cyclones. The Reynolds averaged Navier–Stokes equations with Reynolds stress turbulence model (RSM) are solved by use of the finite volume method based on the SIMPLE pressure correction algorithm in the computational domain. The velocity fluctuations are simulated using the Discrete Random Walk (DRW). Then, to investigate the possible influence of the magnetic field, horizontal and vertical distances of the magnetic source from the coordinate origin as influential parameters are investigated. Solid particles with three different diameters and with different materials including polystyrene, ferrous and nickel are used. Results show that applying a magnetic field can improve the collection efficiency for all different particles’ materials. Analysis of results proves that there is a strong correlation between cyclone performances. It is observed that the collection efficiency is very sensitive to vertical distance of the magnetic source from the origin. Moreover, providing higher efficiency without imposing pressure drop is the advantage of implication of a magnetic field.     

Effect of Operating Pressure on the Application of Multiple Cyclones in Dense Medium Separation (DMS) Plant

In order to meet the market demands for minerals, it is necessary that large volumes of ores be treated at a rapid rate, and this has led to the use of multiple cyclones (in parallel) in the dense medium separation (DMS) plant since the single largest efficiently used cyclone (710 mm in diameter) can only process approximately 400 m³/h of material. However, the use of multiple cyclones came with a few problems that are all centered on the split of the ore feed and transport medium amongst the number of cyclones used. Poor splits often lead to poor separations, especially when treating ores with a high quantity of near-gravity material. This study therefore, focuses on the effects of operating pressure on the stability and efficiency of the cyclones. The effects of pressure on the stability and distribution of the ore in the cyclones were also investigated in this study. The analyses of the results obtained indicate that the circulating medium was stable with percentage stability in the range of 3 to 12%, with average medium stability of 8.3%. The results also show that changes in the circulating medium density and mixing box operating level had little effect on the cyclone pressure. The simulated results indicate that changes larger than 5% may adversely affect cyclone pressures. Tracer analysis was used to determine the efficiency, and its results show that the cyclones were cutting at a very high density cut point, which was due to the high operating head of the cyclones at 16D. It was discovered that operating the cyclone at maximum head of 12D to bring down the cut point reduce the wear rate on the cyclones. The tromp curves obtained from operating the cyclones at a lower pressure gave an average mean probable error of 0.048 (0.05 approximately) and an average cut point of 3.13. This indicates that the cyclones operate fairly similarly with very good separation efficiencies.     

Study and optimization of flow field in a novel cyclone separator with inner cylinder

This paper presents a study of gas-solid flow in a novel cyclone separator with inner cylinder, compared with that in a conventional cyclone. The Reynolds stress model (RSM) is used to simulate fluid flow, and the discrete phase model (DPM) is selected to describe the motion behavior of particles. The experimental data measured by particle image velocimetry (PIV) is used to verify the reliability of the numerical model. The results show that in the novel cyclone, the cleaned gas can be quickly discharged from the vortex finder, the movement distance and residence time of fine particles are prolonged, the short-circuit flow and vertical vortex under the vortex finder are eliminated, the mutual interference between upflow and downflow in the cylinder is eliminated, and the region of quasi-free vortex in the cone is enlarged. Compared with the conventional cyclone, the novel cyclone has higher collection efficiency and lower pressure drop.     

旋转直流内循环式旋风分离器流场测定与分析(Ⅱ)

在流场测定的基础上，着重分析了旋转直流内循环式旋风分离器内三维速度分布和压力分布随入口气速的变化规律，回归了分离段切向速度计算的无因次经验方程，探求了压降性能的放大效应。结果表明该新型旋风分离器的流场规整，放大效应小，阻力系数比常用的反转式旋风分离器降低约30％。     

Dry scrubbing of acid gases in recirculating cyclones

This paper describes a laboratory-scale study on the use of recirculating cyclones as reaction chambers for dry scrubbing of gaseous HCl with solid slaked lime particles. This gas cleaning system combines a numerically optimized reverse flow gas cyclone (RS_VHE geometry) with a straight-through cyclone concentrator, which simultaneously increases the capture of the solid particles and promotes their partial recirculation. A laboratory-scale study was undertaken to test this technology and to compare its performance to a modified Stairmand HE reverse flow cyclone without recirculation. The experimental conditions were: reaction temperature approximately 326 K, gas flow rate approximately 2.9 x 10(-4) Nm(3) s(-1) and relative humidity of the gas approximately 8.5%. The experimental variables tested were the solids load (1.0-9.2 x 10(-7) kg s(-1)) and HCl concentration (0.4-2.8 x 10(-2) mol m(-3)) in the inlet gas. The experimentally obtained particulate removal efficiencies with the recirculating cyclones ( approximately 98%) were higher than those obtained with the Stairmand HE cyclone ( approximately 93%), with the additional advantage of having significantly lower pressure drop. As for the acid removal efficiencies ( approximately 10-96%), no significant differences were found between the two systems tested under the same experimental conditions. The possibility of using optimized recirculating cyclones for gas cleaning in a dry scrubbing process is very promising, since this is a low cost technology, highly efficient both for the removal of acid gases and for the capture of solid particles, which has the advantage of not requiring a post-reaction de-duster.     

Performance evaluation of a new micro gas cyclone using simulation and experimental studies to capture indoor fine particles

The aim of this study was evaluating a micro gas cyclone performance with a body diameter of 10?mm to collect indoor fine particles. The design of a cyclone requires minimizing the pressure drop and maximizing the separation efficiency. Overall and grade efficiencies, pressure drops, and cut sizes have been investigated through a theoretical model, simulation, and experimental studies. The experimental part was conducted using an Electrical Low-Pressure Impactor (ELPI) device to measure particle concentration for flow rates of 10–13.3 (l/min). In order to study the pressure drop and velocity behavior for different flow rates, COMSOL software was utilized. The obtained results from experimental work have met the theoretical and simulation outcomes adequately. It has been confirmed by all the obtained results that by increasing the flow rate and subsequently inlet velocity, the particle collection efficiency and pressure drop increase while the cut size decreases.     

Evaluation of numerical schemes using different simulation methods for the continuous phase modeling of cyclone separators

The steady and unsteady state simulations of Stairmand cyclone separator were carried out to investigate the performance of different interpolation schemes for discretization of pressure gradient and advection terms. The RSM turbulence model was revisited to explore its simulation capability of PVC phenomenon and fluctuating velocity profiles of cyclone separators. The combination of Presto, SO, standard and BFW schemes for discretization of pressure gradient and FOU, power law, SOU, QUICK and MUSCL schemes for discretization of advection terms were studied. The double precision solver of Fluent 6.3.26 and modified RSM turbulence model constants of Jiao et al. (Chem. Eng. Technol. 30 (2007) 15–20) were also verified for simulation of cyclone separators. The predicted mean and fluctuating velocity profiles and pressure drop inside the cyclone separator with steady and unsteady simulations have been compared to experimental results available in literature.The steady state simulation failed to predict velocity profiles and pressure drop inside cyclone separator accurately, whereas the unsteady state simulation predicted velocity profiles, pressure drop and PVC phenomenon close to experimental values. The prediction of fluctuating velocity profile was better than previously reported work in the core region compared to the off core region. The present study revealed that the SOU scheme for discretization of advection terms of momentum, kinetic energy and its dissipation rate equations and the FOU scheme for Reynolds stresses together with the Presto scheme for discretization of pressure gradient with unsteady simulation are the optimum choice for simulation of cyclone separators.     

Effect of Vortex Finder Diameter on Flow Field and Collection Efficiency of Cyclone Separators

In this study, aerocyclone separators, with five different vortex finder diameters are simulated using commercially available computational fluid dynamics code Fluent 6.3.26 to analyze flow field pattern and the collection efficiency. It is found that a decrease in vortex finder diameter results in an increase in pressure drop by 47.84% and an increase in the collection efficiency by 9.54%, whereas, the increase in vortex finder diameter leads to a reduction in pressure drop by 23.87% and a decrease in the collection efficiency by 7.70% as compared to the Stairmand high efficiency cyclone. It is also observed that a decrease in vortex finder diameter leads to about 33% increase in axial velocity and about 25% increase in tangential velocity, whereas, an increase in vortex finder diameter results in about 23% decrease in axial velocity and about 12% decrease in tangential velocity as compared to the Stairmand high efficiency cyclone.     

Filtration of dust in a circulating granular bed filter with conical louver plates (CGBF-CLPs)

A novel circulating granular bed filter with conical louver plates (CGBF-CLPs) was designed to remove dust particulates from the flue gas stream of a coal power plant. The purpose of this investigation was to evaluate the performance of the CGBF-CLPs. Dust collection efficiency and pressure drop data were analyzed to determine better operating conditions. The effect of solid mass flow rate, collector particle size and dust/collector particles separator types on the dust collection efficiency and pressure drop in the CGBF-CLPs were investigated in this study. The solid mass flow rate (B) varied from 15.59+/-0.44 to 20.36+/-0.68 g s(-1) and the initial average collector particle sizes were 1500 and 795 microm, respectively. Two types of separators, a cyclone and an inertial one, for separating the dust and collector particles were used in the CGBF-CLPs system. An Air Personal Sampler (SKC PCXR8) was used to determine the inlet and outlet dust concentrations. A differential pressure transmitter and data acquisition system were used to measure the pressure drop. Experimental results showed that the highest dust collection efficiency was 99.59% when the solid mass flow rate was 17.08+/-0.48 g s(-1) and the initial average collector particle size was 795 microm with the cyclone type separator. The results showed that the attrition fines of the original collector particles returning to the granular bed filter (GBF) reduced bed voidage. This phenomenon significantly increased the dust collection efficiency in the CGBF-CLPs. As a consequence, a bigger bed voidage creates a lower dust collection efficiency in the GBF.