Self‐Healing and Stretchable 3D‐Printed Organic Thermoelectrics

With the advent of flexible and wearable electronics and sensors, there is an urgent need to develop energy‐harvesting solutions that are compatible with such wearables. However, many of the proposed energy‐harvesting solutions lack the necessary mechanical properties, which make them susceptible to damage by repetitive and continuous mechanical stresses, leading to serious degradation in device performance. Developing new energy materials that possess high deformability and self‐healability is essential to realize self‐powered devices. Herein, a thermoelectric ternary composite is demonstrated that possesses both self‐healing and stretchable properties produced via 3D‐printing method. The ternary composite films provide stable thermoelectric performance during viscoelastic deformation, up to 35% tensile strain. Importantly, after being completely severed by cutting, the composite films autonomously recover their thermoelectric properties with a rapid response time of around one second. Using this self‐healable and solution‐processable composite, 3D‐printed thermoelectric generators are fabricated, which retain above 85% of their initial power output, even after repetitive cutting and self‐healing. This approach represents a significant step in achieving damage‐free and truly wearable 3D‐printed organic thermoelectrics.     

Transparent Self‐Healing Polymers Based on Encapsulated Plasticizers in a Thermoplastic Matrix

A self‐healing approach for optically transparent thermoplastic polymers, based on plasticizer‐induced solvent welding, is reported. For the specific system investigated, dibutylphthalate (DBP) filled urea‐formaldehyde capsules are dispersed in a polymethylmethacrylate (PMMA) matrix. Upon a damage event, DBP is released into the crack, and locally plasticizes and swells the polymer, enabling it to remend. Two challenges are addressed to maintain optical transparency: minimization of light scatter from the capsules in the polymer matrix and minimization of light scatter from the healed polymer. PMMA films containing DBP capsules have good transmissive properties as a result of the close index match between PMMA and DBP. The transmission properties are better than, for example, when DBP capsules are dispersed into a poorly index matched matrix, such as polystyrene. In the DBP PMMA system, the healed material is inherently index matched to the polymer matrix and thus the polymer's original optical properties are largely restored. Self‐healing using both small capsules, 1.5 μm in diameter, and large capsules, 75 μm in diameter is demonstrated. Smaller capsules are particularly important for thin polymer films which are not thick enough to hold the larger capsules. Polymer films with smaller capsules also have very good transmission properties due to a minimization of light scattering by the small size of the capsules. Large capsules enable healing of larger damage events, but do inherently result in some light scattering. This plasticizer‐based approach to self‐healing is shown to enable recovery of the protective properties and a portion of the mechanical properties of a polymeric film.     

Highly Efficient and Water‐Insensitive Self‐Healing Elastomer for Wet and Underwater Electronics

Integrating self‐healing capabilities into soft electronic devices increases their durability and long‐term reliability. Although some advances have been made, the use of self‐healing electronics in wet and/or (under)water environments has proven to be quite challenging, and has not yet been fully realized. Herein, a new highly water insensitive self‐healing elastomer with high stretchability and mechanical strength that can reach 1100% and ≈6.5 MPa, respectively, is reported. The elastomer exhibits a high (>80%) self‐healing efficiency (after ≈ 24 h) in high humidity and/or different (under)water conditions without the assistance of an external physical and/or chemical triggers. Soft electronic devices made from this elastomer are shown to be highly robust and able to recover their electrical properties after damages in both ambient and aqueous conditions. Moreover, once operated in extreme wet or underwater conditions (e.g., salty sea water), the self‐healing capability leads to the elimination of significant electrical leakage that would be caused by structural damages. This highly efficient self‐healing elastomer can help extend the use of soft electronics outside of the laboratory and allow a wide variety of wet and submarine applications.     

Ultrauniform Embedded Liquid Metal in Sulfur Polymers for Recyclable,Conductive, and Self‐Healable Materials

Liquid metals (LMs) are receiving growing interest in modern technologies for their various advantages. This work reports using elemental sulfur to achieve nanodispersed liquid metals in bulk polymers for multifunctional LM‐based materials. Ring‐opening polymerization and inverse vulcanization of elemental sulfur provide many polysulfide loops and thiol groups as effective binding ligands that enable extraordinarily uniform dispersion of liquid metals (≈1 µm) in bulk matrix and improve the mechanical performance of the materials. Interestingly, the liquid‐metal‐embedded sulfur polymer (LMESP) materials exhibit excellent thermal‐/solvent‐processability and recyclability. The uniform dispersion leads to phenomenal electrical conductivity of the LMESP at a low volume percentage of LM (30 vol%), overcoming the issue of nonconductivity typically seen in insulated LM–polymer blends. Additionally, the LMESP shows resistive sensitivity toward external pressure. Furthermore, the LMESP materials exhibit an excellent self‐healing ability under mild conditions via the dynamic bonds between polysulfide loops/thiol groups and liquid metals. This work clearly offers a new platform to design liquid metals and can push them for broad applications.     

A Self‐Healable,Highly Stretchable,and Solution Processable Conductive Polymer Composite for Ultrasensitive Strain and Pressure Sensing

Mimicking human skin's functions to develop electronic skins has inspired tremendous efforts in design and synthesis of novel soft materials with simplified fabrication methods. However, it still remains a great challenge to develop electronically conductive materials that are both stretchable and self‐healable. Here it is demonstrated that a ternary polymer composite comprised of polyaniline, polyacrylic acid, and phytic acid can exhibit high stretchability ( ≈ 500%) and excellent self‐healing properties. The polymer composite with optimized composition shows an electrical conductivity of 0.12 S cm^?1. On rupture, both electrical and mechanical properties can be restored with ≈ 99% efficiency in a 24 h period, which is enabled by the dynamic hydrogen bonding and electrostatic interactions. It is further shown that this composite is both strain and pressure sensitive, and therefore can be used for fabricating strain and pressure sensors to detect a variety of mechanical deformations with ultrahigh sensitivity. The sensitivity and sensing range are the highest among all of the reported self‐healable piezoresistive pressure sensors and even surpass most flexible mechanical sensors. Notably, this composite is prepared via a solution casting process, which potentially allows for large‐area, low‐cost fabrication electronic skins.     

Room‐Temperature Self‐Healing and Recyclable Tough Polymer Composites Using Nitrogen‐Coordinated Boroxines

In this paper, nitrogen‐coordinated boroxines are exploited for the fabrication of self‐healing and recyclable polymer composites with enhanced mechanical properties. The 3D polymer networks cross‐linked with nitrogen‐coordinated boroxines are first synthesized through the trimerization of ortho‐aminomethyl‐phenylboronic acid groups at the terminals of poly(propylene glycol) (PPG) chains, and subsequently, the mechanically robust polymer composites are fabricated by utilizing the complexation of nitrogen‐coordinated boroxine‐containing PPG (N‐boroxine‐PPG) with poly(acrylic acid) (PAA) and hydrogen‐bonding interactions between them. The N‐boroxine‐PPG is soft with a tensile strength of 0.19 MPa, whereas the tensile strengths of N‐boroxine‐PPG/PAA composites can be tailored to range from 1.7 to 12.7 MPa by increasing the PAA contents in the polymer composites. It is revealed that the amine ligands can facilitate the formation and dissociation of nitrogen‐coordinated boroxines at room temperature. Moreover, the reversibility of nitrogen‐coordinated boroxines and hydrogen‐bonding interactions enable multiple cycles of healing and recycling of the damaged N‐boroxine‐PPG/PAA composites. The healed and recycled N‐boroxine‐PPG/PAA polymer composites regain most of their mechanical strength.     

Developments and Challenges in Self‐Healing Antifouling Materials

Self‐healing antifouling materials have gained rapidly increasing interest over the past decade and have been studied and used in a rapidly increasing range of applications. Recent developments and challenges in self‐healing antifouling materials are summarized in four sections: first, the different mechanisms for both antifouling and self‐healing are briefly discussed. Second, three main categories of self‐healing antifouling materials based on surface replenishing and dynamic covalent and noncovalent interactions are discussed, with a focus on the preparation, characterization, and central characteristics of different self‐healing antifouling materials. Third, different types of potential applications of self‐healing antifouling materials are summarized, such as injectable hydrogels and oil/water separations. Finally, a summary of future development of the field is provided, and a number of critical limitations that are still outstanding are highlighted.     

Electrical and Mechanical Self‐Healing in High‐Performance Dielectric Elastomer Actuator Materials

Dielectric elastomers are of interest for actuator applications due to their large actuation strain, high bandwidth, high energy density, and their flexible nature. If future dielectric elastomers are to be used reliably in applications that include soft robotics, medical devices, artificial muscles, and electronic skins, there is a need to design devices that are tolerant to electrical and mechanical damage. In this paper, the first report of self‐healing of both electrical breakdown and mechanical damage in dielectric actuators using a thermoplastic methyl thioglycolate–modified styrene–butadiene–styrene (MGSBS) elastomer is provided. The self‐healing functions are examined from the material to device level by detailed examination of the healing process, and characterization of electrical properties and actuator response before and after healing. It is demonstrated that after dielectric breakdown, the initial dielectric strength can be recovered by up to 67%, and after mechanical damage, a 39% recovery can be achieved with no degradation of the strain–voltage response of the actuators. The elastomer can also heal a combination of mechanical and electrical failures. This work provides a route to create robust and damage tolerant dielectric elastomers for soft robotic and other applications related to actuator and energy‐harvesting systems.     

A High‐Capacitance Salt‐Free Dielectric for Self‐Healable,Printable, and Flexible Organic Field Effect Transistors and Chemical Sensor

Printable and flexible electronics attract sustained attention for their low cost, easy scale up, and potential application in wearable and implantable sensors. However, they are susceptible to scratching, rupture, or other damage from bending or stretching due to their “soft” nature compared to their rigid counterparts (Si‐based electronics), leading to loss of functionality. Self‐healing capability is highly desirable for these “soft” electronic devices. Here, a versatile self‐healing polymer blend dielectric is developed with no added salts and it is integrated into organic field transistors (OFETs) as a gate insulator material. This polymer blend exhibits an unusually high thin film capacitance (1400 nF cm^?2 at 120 nm thickness and 20–100 Hz). Furthermore, it shows pronounced electrical and mechanical self‐healing behavior, can serve as the gate dielectric for organic semiconductors, and can even induce healing of the conductivity of a layer coated above it together with the process of healing itself. Based on these attractive properties, we developed a self‐healable, low‐voltage operable, printed, and flexible OFET for the first time, showing promise for vapor sensing as well as conventional OFET applications.     

A Highly Stretchable and Self‐Healing Supramolecular Elastomer Based on Sliding Crosslinks and Hydrogen Bonds

The long application life and stable performance of stretchable electronics have been putting forward requirements for both higher mechanical properties and better self‐healing ability of polymeric substrates. However, for self‐healing materials, simultaneously improving stretchability and robustness is still challenging. Here, by incorporating sliding crosslinker (polyrotaxanes) and hydrogen bonds into a polymer, a highly stretchable and self‐healable elastomer with good mechanical strength is achieved. The elastomer exhibits very high stretchability, such that it can be stretched to 2800% with a fracture strength of 1.05 MPa. Moreover, the elastomer can achieve nearly complete self‐healing (93%) at 55 °C. Next, tensile tests under different temperatures, step extension experiments, and in situ small angle X‐ray scattering confirm that the excellent stretchability is attributed to the combined effects of sliding cyclodextrins along guest chains and hydrogen bonds. Furthermore, a strain sensor by coating the single‐wall carbon nanotubes onto the surface of the elastic substrate is fabricated.     

Nanoscale Organic Thermoelectric Materials: Measurement,Theoretical Models,and Optimization Strategies

The demands for waste heat energy recovery from industrial production, solar energy, and electronic devices have resulted in increasing attention being focused on thermoelectric materials. Over the past two decades, significant progress is achieved in inorganic thermoelectric materials. In addition, with the proliferation of wireless mobile devices, economical, efficient, lightweight, and bio‐friendly organic thermoelectric (OTE) materials have gradually become promising candidates for thermoelectric devices used in room‐temperature environments. With the development of experimental measurement techniques, the manufacturing for nanoscale thermoelectric devices has become possible. A large number of studies have demonstrated the excellent performance of nanoscale thermoelectric devices, and further improvement of their thermoelectric conversion efficiency is expected to have a significant impact on global energy consumption. Here, the development of experimental measurement methods, theoretical models, and performance modulation for nanoscale OTE materials are summarized. Suggestions and prospects for the future development of these devices are also provided.     

Toward Stretchable Self‐Powered Sensors Based on the Thermoelectric Response of PEDOT:PSS/Polyurethane Blends

The development of new flexible and stretchable sensors addresses the demands of upcoming application fields like internet‐of‐things, soft robotics, and health/structure monitoring. However, finding a reliable and robust power source to operate these devices, particularly in off‐the‐grid, maintenance‐free applications, still poses a great challenge. The exploitation of ubiquitous temperature gradients, as the source of energy, can become a practical solution, since the recent discovery of the outstanding thermoelectric properties of a conductive polymer, poly(3,4‐ethylenedioxythiophene)‐poly(styrenesulfonate) (PEDOT:PSS). Unfortunately the use of PEDOT:PSS is currently constrained by its brittleness and limited processability. Herein, PEDOT:PSS is blended with a commercial elastomeric polyurethane (Lycra), to obtain tough and processable self‐standing films. A remarkable strain‐at‐break of ≈700% is achieved for blends with 90 wt% Lycra, after ethylene glycol treatment, without affecting the Seebeck voltage. For the first time the viability of these novel blends as stretchable self‐powered sensors is demonstrated.     

Self‐Doping Cathode Interfacial Material Simultaneously Enabling High Electron Mobility and Powerful Work Function Tunability for High‐Efficiency All‐Solution‐Processed Polymer Light‐Emitting Diodes

A variety of N ‐hydrogenated/N ‐methylated pyridinium salts are elaborately designed and synthesized. Thermogravimetric and X‐ray photoelectron spectra analysis indicate the intensities of the N? H covalent bonds are strengthened step‐by‐step from 3,3′‐(5′‐(3‐(pyridin‐3‐yl)phenyl)‐[1,1′:3′,1″‐terphenyl]‐3,3″‐diyl)dipyridine (Tm)‐HCl to Tm‐HBr and then Tm‐TfOH, which results in gradually improved cathode interfacial modification abilities. The larger dipole moments of N⁺? H containing moieties compared to those of the N⁺? CH₃ endow them with more preferable interfacial modification abilities. Electron paramagnetic resonance signals reveal the existence of radical anions in the solid state of Tm‐TfOH, which enables its self‐doping property and high electron mobility up to 1.67 × 10^?3 cm² V^?1 s^?1. Using the Tm‐TfOH as the cathode interfacial layers (CILs), the phenyl‐substituted poly(para ‐phenylene vinylene)‐based all‐solution‐processed polymer light‐emitting diodes (PLEDs) achieve more preferable device performances than the poly[(9,9‐bis(3′‐(N ,N ‐dimethylamino)propyl)‐2,7‐fluorene)‐alt ‐2,7‐(9,9‐dioctylfluorene)]‐based ones, i.e., high current density of nearly 300 mA cm^?2, very high luminance over 15 000 cd m^?2 at a low bias of 5 V. Remarkably, the thickness of the CILs has little impact on the device performance and high efficiencies are maintained even at thicknesses up to 85 nm, which is barely realized in PLEDs with small‐molecule‐based electron transporting layers.     

Transparent,Mechanically Strong,Extremely Tough,Self‐Recoverable,Healable Supramolecular Elastomers Facilely Fabricated via Dynamic Hard Domains Design for Multifunctional Applications

The design and synthesis of supramolecular self‐healing polymers with high healing efficiency and excellent integrated mechanical properties is challenging due to conflicting attributes of dynamic self‐healing and mechanical properties. Herein, this study introduces a design concept, that is, “dynamic hard domains,” to balance self‐healing performance, mechanical strength, elastic recovery, and at the same time obtain extreme toughness. The essential features of the dynamic hard domains include: (i) a noncrystallized and loose structure, (ii) low binding energy and high mobility, and (iii) sequential dissociation and rapid rearrangement. Based on this strategy, a simple one‐step polycondensation route is reported to synthesize a transparent polyurethane‐urea supramolecular elastomer (PPGTD‐IDA), which successfully combines decent mechanical strength, extreme toughness, outstanding notch‐sensitiveness, self‐recoverability, and room‐temperature self‐healing. Upon rupture, the PPGTD‐IDA completely restores the mechanical properties within 48 h. Furthermore, the results demonstrate repeatable healing of mechanical properties and prominent antiaging healability. Taking advantages of merits of PPGTD‐IDA, it can be utilized for fabricating impact‐resistant materials for protection of aluminum alloys as well as stretchable and self‐healing conductors, which exhibits unique characteristics such as stable conductivity during stretching (even after healing or with notch), and automatic elimination of the notch during stretching/releasing cycles.     

Mechanically Robust,Self‐Healable,and Highly Stretchable “Living” Crosslinked Polyurethane Based on a Reversible CC Bond

Stimuli‐responsive polymers built by reversible covalent bonds used to possess unbalanced mechanical properties. Here, a crosslinked polyurethane containing aromatic pinacol as a novel reversible C?C bond provider is synthesized, whose tensile strength and failure strain are tunable from 27.3 MPa to as high as 115.2 MPa and from 324% to 1501%, respectively, owing to the relatively high bond energy of the C?C bond of pinacol as well as the hydrogen bond between hard segments and semicrystalline soft segments. Moreover, the dynamic equilibrium of pinacol enables self‐healing and recycling of the polymer. Interestingly, the dynamic exchange among macromolecules, for the first time, successfully cooperates with solid‐state drawing that applies to thermoplastics, realizing strengthening of thermoset. Meanwhile, the radicals derived from homolysis of pinacol can repeatedly initiate polymerization of vinyl monomers. The fruitful outcomes of this work may create a series of promising new techniques.     

Robust,Self‐Healing Superamphiphobic Fabrics Prepared by Two‐Step Coating of Fluoro‐Containing Polymer,Fluoroalkyl Silane,and Modified Silica Nanoparticles

A robust, superamphiphobic fabric with a novel self‐healing ability to autorepair from chemical damage is prepared by a two‐step wet‐chemistry coating technique using an easily available material system consisting of poly(vinylidene fluoride‐co‐hexafluoropropylene), fluoroalkyl silane, and modified silica nanoparticles. The coated fabrics can withstand at least 600 cycles of standard laundry and 8000 cycles of abrasion without apparently changing the superamphiphobicity. The coating is also very stable to strong acid/base, ozone, and boiling treatments. After being damaged chemically, the coating can restore its super liquid‐repellent properties by a short‐time heating treatment or room temperature ageing. This simple but novel and effective coating system may be useful for the development of robust protective clothing for various applications.