Mussel Inspired Dynamic Cross‐Linking of Self‐Healing Peptide Nanofiber Network

A general drawback of supramolecular peptide networks is their weak mechanical properties. In order to overcome a similar challenge, mussels have adapted to a pH‐dependent iron complexation strategy for adhesion and curing. This strategy also provides successful stiffening and self‐healing properties. The present study is inspired by the mussel curing strategy to establish iron cross‐link points in self‐assembled peptide networks. The impact of peptide‐iron complexation on the morphology and secondary structure of the supramolecular nanofibers is characterized by scanning electron microscopy, circular dichroism and Fourier transform infrared spectroscopy. Mechanical properties of the cross‐linked network are probed by small angle oscillatory rheology and nanoindentation by atomic force microscopy. It is shown that iron complexation has no influence on self‐assembly and β‐sheet‐driven elongation of the nanofibers. On the other hand, the organic‐inorganic hybrid network of iron cross‐linked nanofibers demonstrates strong mechanical properties comparable to that of covalently cross‐linked network. Strikingly, iron cross‐linking does not inhibit intrinsic reversibility of supramolecular peptide polymers into disassembled building blocks and the self‐healing ability upon high shear load. The strategy described here could be extended to improve mechanical properties of a wide range of supramolecular polymer networks.     

Thermally Enhanced Visible‐Light Photochromism of Phosphomolybdic Acid–Polyvinylpyrrolidone Hybrid Films

Phosphomolybdic acid/polyvinylpyrrolidone hybrid films were found to show visible light photochromism. It is identified that the intra‐supramolecular charge transfer between the inorganic and organic molecules is responsible for the visible‐light coloration. Interestingly, the films show photo‐memory and thermal activation. The films show a small change in absorbance after being irradiated with visible light for a short time, and the coloration can be enhanced greatly by subsequent thermal treatment. Electrical measurements indicate that the conductivity of the film increases after the brief irradiation, which promotes transfer of the electrons induced by the thermal treatment.     

Modular and Versatile Spatial Functionalization of Tissue Engineering Scaffolds through Fiber‐Initiated Controlled Radical Polymerization

Native tissues are typically heterogeneous and hierarchically organized, and generating scaffolds that can mimic these properties is critical for tissue engineering applications. By uniquely combining controlled radical polymerization (CRP), end‐functionalization of polymers, and advanced electrospinning techniques, a modular and versatile approach is introduced to generate scaffolds with spatially organized functionality. Poly‐ε‐caprolactone is end functionalized with either a polymerization‐initiating group or a cell‐binding peptide motif cyclic Arg‐Gly‐Asp‐Ser (cRGDS), and are each sequentially electrospun to produce zonally discrete bilayers within a continuous fiber scaffold. The polymerization‐initiating group is then used to graft an antifouling polymer bottlebrush based on poly(ethylene glycol) from the fiber surface using CRP exclusively within one bilayer of the scaffold. The ability to include additional multifunctionality during CRP is showcased by integrating a biotinylated monomer unit into the polymerization step allowing postmodification of the scaffold with streptavidin‐coupled moieties. These combined processing techniques result in an effective bilayered and dual‐functionality scaffold with a cell‐adhesive surface and an opposing antifouling non‐cell‐adhesive surface in zonally specific regions across the thickness of the scaffold, demonstrated through fluorescent labelling and cell adhesion studies. This modular and versatile approach combines strategies to produce scaffolds with tailorable properties for many applications in tissue engineering and regenerative medicine.     

Photo‐Induced Functionalization of Spherical and Planar Surfaces via Caged Thioaldehyde End‐Functional Polymers

The synthesis and application of a novel reversible addition‐fragmentation chain transfer (RAFT) agent carrying a photocaged thioaldehyde moiety is described (λ_max = 355 nm). RAFT polymerization of styrene, dimethylacrylamide and a glycomonomer is evidenced (3600 g mol^?1 ≤ M_n ≤ 15 000 g mol^?1; 1.07 ≤ ? ≤ 1.20) with excellent end‐group fidelity. The photogenerated thioaldehyde on the chain ends can undergo hetero Diels–Alder reactions with dienes as well as reactions with nucleophiles. The terminal photoreactive polymers are photografted to porous diene‐reactive polymeric microspheres. The grafted particles are in‐depth characterized via scanning electron microscopy, elemental analysis, X‐ray photoelectron spectroscopy, and high resolution FT‐IR microscopy, leading to a qualitative as well as quantitative image of the core–shell objects. Grafting densities up to 0.10 molecules nm^?2 are reached. The versatility of the thioaldehyde ligation is evidenced by spatially resolved grafting of polystyrene onto nucleophilic groups present in poly (dopamine) (PDA)‐coated glass slides and silicon wafers via two‐photon direct laser writing (DLW) imaged by ToF‐SIMS. The combination of thioaldehyde ligation, RAFT polymerization, and DLW allows for the spatially resolved grafting of a vast range of polymers onto various substrates in any desired pattern with sub‐micrometer resolution.     

BN–Graphene Composites Generated by Covalent Cross‐Linking with Organic Linkers

Composites of boron nitride (BN) and carboxylated graphene are prepared for the first time using covalent cross‐linking employing the carbodiimide reaction. The BN_1–xG_x (x ≈ 0.25, 0.5, and 0.75) obtained are characterized using a variety of spectroscopic techniques and thermogravimetric analysis. The composites show composition‐dependent electrical resistivity, the resistivity decreasing with increase in graphene content. The composites exhibit microporosity and the x ≈ 0.75 composite especially exhibits satisfactory performance with high stability as an electrode in supercapacitors. The x ≈ 0.75 composite is also found to be a good electrocatalyst for the oxygen reduction reaction in fuel cells.     

Semiconducting Polymers via Microwave‐Assisted Suzuki and Stille Cross‐Coupling Reactions

A fully conjugated para‐phenylene ladder polymer ( P1 ) and the alternating copolymers {2,7‐[9,9‐bis(2‐ethylhexyl)fluorene]‐5,5′‐(2,2′‐bithiophene)} ( P3 ) and {2,7‐[9,9‐dioctylfluorene]‐5,5′‐(2,2′‐bithiophene)} ( P4 ) have been prepared via metal‐mediated cross‐coupling reactions, using microwaves as a heat source. The procedure, which yields polymeric material in ca. ten minutes, has no adverse effects on the quality of the polymers and displays a high degree of reproducibility. Transfer of the optimized conditions to the synthesis of a new naphthalene‐based polyarylene‐ketone ( P2 ) and a (1,5‐dioctoxynaphthylene‐2,6‐diyl‐alt‐2,2′‐bithiophene‐5,5′‐diyl) copolymer ( P5 ) confirmed the versatility of the procedure and the dramatic reduction in reaction times compared with conventional heating. In the case of the Stille‐type coupling reaction of the electron‐rich, less reactive dibromo monomer 1,5‐dioctoxy‐2,6‐dibromo‐naphthalene, the microwave‐assisted protocol results in a marked increase in both yield and molecular weight.     

Plasmonic Janus‐Composite Photocatalyst Comprising Au and C–TiO2 for Enhanced Aerobic Oxidation over a Broad Visible‐Light Range

Asymmetric Janus nanostructures containing a gold nanocage (NC) and a carbon–titania hybrid nanocrystal (AuNC/(C–TiO₂)) are prepared using a novel and facile microemulsion‐based approach that involves the assistance of ethanol. The localized surface plasmon resonance of the Au NC with a hollow interior and porous walls induce broadband visible‐light harvesting in the Janus AuNC/(C–TiO₂). An acetone evolution rate of 6.3 μmol h^?1 g^?1 is obtained when the Janus nanostructure is used for the photocatalytic aerobic oxidation of iso‐propanol under visible light (λ = 480–910 nm); the rate is 3.2 times the value of that obtained with C–TiO₂, and in photo‐electrochemical investigations an approximately fivefold enhancement is obtained. Moreover, when compared with the core–shell structure (AuNC@(C–TiO₂) and a gold–carbon–titania system where Au sphere nanoparticles act as light‐harvesting antenna, Janus AuNC/(C–TiO₂) exhibit superior plasmonic enhancement. Electromagnetic field simulation and electron paramagnetic resonance results suggest that the plasmon–photon coupling effect is dramatically amplified at the interface between the Au NC and C–TiO₂, leading to enhanced generation of energetic hot electrons for photocatalysis.     

Heterostructured Visible‐Light‐Active Photocatalyst of Chromia‐Nanoparticle‐Layered Titanate

An efficient visible‐light active photocatalyst of porous CrO_x–Ti_1.83O₄ nanohybrid with a 1:1 type ordered heterostructure is synthesized through a hybridization between a chromia cluster and exfoliated titanate nanosheets. The present nanohybrids are found to have a large surface area (ca. 250–310 m² g^–1) and an intense absorption of visible light, ascribable, respectively, to the formation of a porous structure and the hybridization of titanate with narrow‐bandgap chromium oxide. After the calcination at 400 °C, the nanohybrid shows an enhanced photocatalytic activity to effectively decompose organic compounds under the irradiation of visible light (λ > 420 nm). The present study highlights the exfoliation–restacking route as a very powerful way to develop efficient visible‐light‐harvesting photocatalysts with excellent thermal stability.     

Controlling the Thermoelectric Properties of Organometallic Coordination Polymers via Ligand Design

Organometallic coordination polymers (OMCPs) are a promising class of thermoelectric materials with high electrical conductivities and thermal resistivities. The design criteria for these materials, however, remain elusive and so far material modifications have been focused primarily on the nature of the metal cation to tune the thermoelectric properties. Herein, an alternative approach is described by synthesizing new organic ligands for OMCPs, allowing modulation of the thermoelectric properties of the novel OMCP materials over several orders of magnitude, as well as controlling the polarity of the Seebeck coefficient. Extensive material purification combined with spectroscopy experiments and calculations furthermore reveal the charge‐neutral character of the polymer backbones. In the absence of counter‐cations, the OMCP backbones are composed of air‐stable, ligand‐centered radicals. The findings open up new synthetic possibilities for OMCPs by removing structural constraints and putting significant emphasis on the molecular structure of the organic ligands in OMCP materials to tune their thermoelectric properties.     

Solid‐State Light Emission Controlled by Tuning the Hierarchical Superstructure of Self‐Assembled Luminogens

Solid‐state luminescence is an important strategy for color generation via molecular self‐assembly. Here, a new luminogen (AT₃EMIS) containing both a rigid chromophore and a flexible dendron is designed and synthesized for multicolor emission. The emission energy of the target material is precisely controlled by adjusting three different columnar arrays through thermal and mechanical stimulation. With well‐defined supramolecular organizations in different length scales, the luminescent properties of the light switch can be tuned.     

Fabrication and Spatially Resolved Functionalization of 3D Microstructures via Multiphoton‐Induced Diels–Alder Chemistry

Three‐dimensional microstructures are fabricated utilizing direct laser writing combined with a non‐radical step polymerization based on multiphoton‐induced Diels–Alder chemistry of o‐quinodimethanes and maleimides. Woodpile photonic crystals with a total of five axial periods and a rod spacing of down to 500 nm are fabricated. The structures are characterized via scanning electron microscopy and focused ion beam milling. In addition, corresponding photonic stop bands are investigated via light microscopy as well as transmission and reflection spectroscopy. The Diels–Alder based network formation during direct laser writing is verified via infrared spectroscopy. Spatially resolved surface patterning of covalently bonded functional molecules on fabricated structures is demonstrated by employing the direct laser writing setup and a bromine containing maleimide. The successful surface modification is verified via time‐of‐flight secondary ion mass spectrometry.     

Highly Scalable,Closed‐Loop Synthesis of Drug‐Loaded,Layer‐by‐Layer Nanoparticles

Layer‐by‐layer (LbL) self‐assembly is a versatile technique from which multi­component and stimuli‐responsive nanoscale drug‐carriers can be constructed. Despite the benefits of LbL assembly, the conventional synthetic approach for fabricating LbL nanoparticles requires numerous purification steps that limit scale, yield, efficiency, and potential for clinical translation. In this report, a generalizable method for increasing throughput with LbL assembly is described by using highly scalable, closed‐loop diafiltration to manage intermediate purification steps. This method facilitates highly controlled fabrication of diverse nanoscale LbL formulations smaller than 150 nm composed from solid‐polymer, mesoporous silica, and liposomal vesicles. The technique allows for the deposition of a broad range of polyelectrolytes that included native polysaccharides, linear polypeptides, and synthetic polymers. The cytotoxicity, shelf life, and long‐term storage of LbL nanoparticles produced using this approach are explored. It is found that LbL coated systems can be reliably and rapidly produced: specifically, LbL‐modified liposomes could be lyophilized, stored at room temperature, and reconstituted without compromising drug encapsulation or particle stability, thereby facilitating large scale applications. Overall, this report describes an accessible approach that significantly improves the throughput of nanoscale LbL drug‐carriers that show low toxicity and are amenable to clinically relevant storage conditions.     

Highly Ordered Mesoporous Crystalline MoSe2 Material with Efficient Visible‐Light‐Driven Photocatalytic Activity and Enhanced Lithium Storage Performance

Highly ordered mesoporous crystalline MoSe₂ is synthesized using mesoporous silica SBA‐15 as a hard template via a nanocasting strategy. Selenium powder and phosphomolybdic acid (H₃PMo₁₂O₄₀) are used as Se and Mo sources, respectively. The obtained products have a highly ordered hexagonal mesostructure and a rod‐like particle morphology, analogous to the mother template SBA‐15. The UV‐vis‐NIR spectrum of the material shows a strong light absorption throughout the entire visible wavelength region. The direct bandgap is estimated to be 1.37 eV. The high surface area MoSe₂ mesostructure shows remarkable photocatalytic activity for the degradation of rhodamine B, a model organic dye, in aqueous solution under visible light irradiation. In addition, the synthesized mesoporous MoSe₂ possess a reversible lithium storage capacity of 630 mAh g^?1 for at least 35 cycles without any notable decrease. The rate performance of mesoporous MoSe₂ is much better than that of analogously synthesized mesoporous MoS₂, making it a promising anode for the lithium ion battery.     

Three‐Dimensional SiCN Ceramic Microstructures via Nano‐Stereolithography of Inorganic Polymer Photoresists

We report a newly synthesized inorganic polymer photoresist with a high ceramic yield by the functionalization of polyvinylsilazane (KiON VL20) with 2‐isocyanatoethyl methacrylate via linkage or insertion reaction routes. The chemistry of the synthesis and the pyrolytic conversion as well as the mechanical evaluation were investigated by using various analytical instruments. We show for the first time that this photosensitive resin is a novel precursor for the fabrication of complex 3D SiCN ceramic microstructures with a 210 nm resolution via a two‐photon absorbed crosslinking process and subsequent pyrolysis at 600 °C under a nitrogen atmosphere. Moreover, the dimensional deformation during pyrolysis was significantly reduced by adding silica nanoparticles as a filler. In particular, the ceramic microstructures containing 40 wt % silica nanoparticles exhibited a relatively isotropic shrinkage owing to its sliding free from the substrate during pyrolysis.     

A Smart Light‐Controlled Carrier Switch in an Organic Light Emitting Device

A real ON–OFF carrier switch based on a new ferrocenyl diarylethene compound (DTE‐FC) as the light‐sensitive and photoswitching layer in an organic light‐emitting device (OLED) with a multilayer sandwich structure has been prepared. This switch layer functions not only as a hole transporter but also as a good barrier block when needed, which arises from the light‐induced photochromic effect of the DTE‐FC. For the uncolored open‐ring form of DTE‐FC, no luminescence was observed despite the increase in applied voltage. On the contrary, for the colored photostationary state of DTE‐FC, which was obtained by irradiation with 365 nm light, the luminescence could be observed when the applied voltage reached 14.0 V and increased with applied voltage. Thus, the uncolored state corresponds to the OFF state of luminescence and the photostationary state corresponds to the ON state. The two states can be interconverted by control of the UV and visible light (>500 nm) irradiation.     

Swelling‐Agent‐Free Synthesis of Siliceous and Functional Mesocellular Foam‐Like Mesophases by Using a Carboxy‐Terminated Triblock Copolymer

Swelling‐agent‐free synthesis of mesocellular foam (MCF)‐like silica mesophases by a pH‐dependent structural transformation using carboxy‐terminated triblock copolymer Pluronic P123 has been discovered. The structural properties of the MCF‐like silica materials can be modulated by controlled calcination or post‐synthesis treatment with sulfuric acid, and either closed‐cell or open‐cell mesostructures have been prepared. The MCF‐like silica mesophases have also been applied as hard templates to prepare MCF‐like carbon materials via a nanocasting route. Furthermore, the swelling‐agent‐free synthesis has been found to be less sensitive to the presence of organosilanes, and the cocondensation syntheses of functional MCF‐like materials with carboxyethyl, iodopropyl, or mercaptopropyl groups have also been demonstrated.