Unexpected Sole Enol‐Form Emission of 2‐(2′‐Hydroxyphenyl)oxazoles for Highly Efficient Deep‐Blue‐Emitting Organic Electroluminescent Devices

Considerable efforts have been devoted to the development of highly efficient blue light‐emitting materials. However, deep‐blue fluorescence materials that can satisfy the Commission Internationale de l'Eclairage (CIE) coordinates of (0.14, 0.08) of the National Television System Committee (NTSC) standard blue and, moreover, possess a high external quantum efficiency (EQE) over 5%, remain scarce. Here, the unusual luminescence properties of triphenylamine‐bearing 2‐(2′‐hydroxyphenyl)oxazoles ( 3a–3c ) and their applications in organic light‐emitting diodes (OLEDs) are reported as highly efficient deep‐blue emitters. The 3a ‐based device exhibits a high spectral stability and an excellent color purity with a narrow full‐width at half‐maximum of 53 nm and the CIE coordinates of (0.15, 0.08), which is very close to the NTSC standard blue. The exciton utilization of the device closes to 100%, exceeding the theoretical limit of 25% in conventional fluorescent OLEDs. Experimental data and theoretical calculations demonstrate that 3a possesses a highly hybridized local and charge‐transfer excited state character. In OLEDs, 3a exhibits a maximum luminance of 9054 cd m^?2 and an EQE up to 7.1%, which is the first example of highly efficient blue OLEDs based on the sole enol‐form emission of 2‐(2′‐hydroxyphenyl)azoles.     

Efficient Nondoped Blue Fluorescent Organic Light‐Emitting Diodes (OLEDs) with a High External Quantum Efficiency of 9.4% @ 1000 cd m−2 Based on Phenanthroimidazole−Anthracene Derivative

Organic light‐emitting diodes (OLEDs) can promise flexible, light weight, energy conservation, and many other advantages for next‐generation display and lighting applications. However, achieving efficient blue electroluminescence still remains a challenge. Though both phosphorescent and thermally activated delayed fluorescence materials can realize high‐efficiency via effective triplet utilization, they need to be doped into appropriate host materials and often suffer from certain degree of efficiency roll‐off. Therefore, developing efficient blue‐emitting materials suitable for nondoped device with little efficiency roll‐off is of great significance in terms of practical applications. Herein, a phenanthroimidazole?anthracene blue‐emitting material is reported that can attain high efficiency at high luminescence in nondoped OLEDs. The maximum external quantum efficiency (EQE) of nondoped device is 9.44% which is acquired at the luminescence of 1000 cd m^?2. The EQE is still as high as 8.09% even the luminescence reaches 10 000 cd m^?2. The maximum luminescence is ≈57 000 cd m^?2. The electroluminescence (EL) spectrum shows an emission peak of 470 nm and the Commission International de L'Eclairage (CIE) coordinates is (0.14, 0.19) at the voltage of 7 V. To the best of the knowledge, this is among the best results of nondoped blue EL devices.     

Naphthothiadiazole‐Based Near‐Infrared Emitter with a Photoluminescence Quantum Yield of 60% in Neat Film and External Quantum Efficiencies of up to 3.9% in Nondoped OLEDs

Fluorescent emitters have regained intensive attention in organic light emitting diode (OLED) community owing to the breakthrough of the device efficiency and/or new emitting mechanism. This provides a good chance to develop new near‐infrared (NIR) fluorescent emitter and high‐efficiency device. In this work, a D‐π‐A‐π‐D type compound with naphthothiadiazole as acceptor, namely, 4,4′‐(naphtho[2,3‐c][1,2,5]thiadiazole‐4,9‐diyl)bis(N,N ‐diphenylaniline) (NZ2TPA), is designed and synthesized. The photophysical study and density functional theory analysis reveal that the emission of the compound has obvious hybridized local and charge‐transfer (HLCT) state feature. In addition, the compound shows aggregation‐induced emission (AIE) characteristic. Attributed to its HLCT mechanism and AIE characteristic, NZ2TPA acquires an unprecedentedly high photoluminescent quantum yield of 60% in the neat film, which is the highest among the reported organic small‐molecule NIR emitters and even exceeds most phosphorescent NIR materials. The nondoped devices based on NZ2TPA exhibit excellent performance, achieving a maximum external quantum efficiency (EQE) of 3.9% with the emission peak at 696 nm and a high luminance of 6330 cd m^?2, which are among the highest in the reported nondoped NIR fluorescent OLEDs. Moreover, the device remains a high EQE of 2.8% at high brightness of 1000 cd m^?2, with very low efficiency roll‐off.     

Manipulation of Charge and Exciton Distribution Based on Blue Aggregation‐Induced Emission Fluorophors: A Novel Concept to Achieve High‐Performance Hybrid White Organic Light‐Emitting Diodes

The aggregation‐induced emission (AIE) phenomenon is important in organic light‐emitting diodes (OLEDs), for it can potentially solve the aggregation‐caused quenching problem. However, the performance of AIE fluorophor‐based OLEDs (AIE OLEDs) is unsatisfactory, particularly for deep‐blue devices (CIEy < 0.15). Here, by enhancing the device engineering, a deep‐blue AIE OLED exhibits low voltage (i.e., 2.75 V at 1 cd m^?2), high luminance (17 721 cd m^?2), high efficiency (4.3 lm W^?1), and low efficiency roll‐off (3.6 lm W^?1 at 1000 cd m^?2), which is the best deep‐blue AIE OLED. Then, blue AIE fluorophors, for the first time, have been demonstrated to achieve high‐performance hybrid white OLEDs (WOLEDs). The two‐color WOLEDs exhibit i) stable colors and the highest efficiency among pure‐white hybrid WOLEDs (32.0 lm W^?1); ii) stable colors, high efficiency, and very low efficiency roll‐off; or iii) unprecedented efficiencies at high luminances (i.e., 70.2 cd A^?1, 43.4 lm W^?1 at 10 000 cd m^?2). Moreover, a three‐color WOLED exhibits wide correlated color temperatures (10 690–2328 K), which is the first hybrid WOLED showing sunlight‐style emission. These findings will open a novel concept that blue AIE fluorophors are promising candidates to develop high‐performance hybrid WOLEDs, which have a bright prospect for the future displays and lightings.     

Blue Aggregation‐Induced Emission Luminogens: High External Quantum Efficiencies Up to 3.99% in LED Device,and Restriction of the Conjugation Length through Rational Molecular Design

Great efforts have been devoted to seek novel approaches for constructing blue fluorescent materials, which is one of the most important prerequisites for the commercialization of OLEDs. In recent years, various outstanding luminogens with aggregation‐induced emission characteristic exhibit promising applications as emitters, but blue AIE fluorophores with excellent EL performance are still very scarce. Here, five hole‐dominated blue AIE molecules are demonstrated by adopting construction approaches of changing linkage modes and increasing intramolecular torsion together, with the aim to restrict conjugation lengths without sacrificing good EL data. Device results show that the novel synthesized materials could be applied as bifunctional materials, namely blue light‐emitting and hole‐transporting materials, with comparable EL efficiencies, and the η_C,max and η_ext,max are up to 8.03 cd A^?1 and 3.99% respectively, which is among the best EL performance for blue AIE luminogens.     

Over 10% EQE Near‐Infrared Electroluminescence Based on a Thermally Activated Delayed Fluorescence Emitter

Significant effort has been made to develop novel material systems to improve the efficiency of near‐infrared organic light‐emitting diodes (NIR OLEDs). Of those, fluorescent chromophores are mostly studied because of their advantages in cost and tunability. However, it is still rare for fluorescent NIR emitters to present good color purities in the NIR range and to have high external quantum efficiency (EQE). Here, a wedge‐shaped D‐π‐A‐π‐D emitter APDC‐DTPA with thermally activated delayed fluorescence property and a small single‐triplet splitting (ΔE_st) of 0.14 eV is presented. The non‐doped NIR device exhibits excellent performance with a maximum EQE of 2.19% and a peak wavelength of 777 nm. Remarkably, when 10 wt% of APDC‐DTPA is doped in 1,3,5‐tris(1‐phenyl‐1H‐benzimidazol‐2‐yl)benzene host, an extremely high EQE of 10.19% with an emission peak of 693 nm is achieved. All these values represent the best result for NIR OLEDs based on a pure organic fluorescent emitter with similar device structure and color gamut.     

Blue‐Light‐Emitting Oligoquinolines: Synthesis,Properties, and High‐Efficiency Blue‐Light‐Emitting Diodes

The synthesis, photophysics, cyclic voltammetry, and highly efficient blue electroluminescence of a series of four new n‐type conjugated oligomers, 6,6′‐bis(2,4‐diphenylquinoline) (B1PPQ), 6,6′‐bis(2‐(4‐tert‐butylphenyl)‐4‐phenylquinoline) (BtBPQ), 6,6′‐bis(2‐p‐biphenyl)‐4‐phenylquinoline) (B2PPQ), and 6,6′‐bis((3,5‐diphenylbenzene)‐4‐phenylquinoline) (BDBPQ) is reported. The oligoquinolines have high glass‐transition temperatures (T_g ≥ 133 °C), reversible electrochemical reduction, and high electron affinities (2.68–2.81 eV). They emit blue photoluminescence with 0.73–0.94 quantum yields and 1.06–1.42 ns lifetimes in chloroform solutions. High‐performance organic light‐emitting diodes (OLEDs) with excellent blue chromaticity coordinates are achieved from all the oligoquinolines. OLEDs based on B2PPQ as the blue emitter give the best performance with a high brightness (19 740 cd m^–2 at 8.0 V), high efficiency (7.12 cd A^–1 and 6.56 % external quantum efficiency at 1175 cd m^–2), and excellent blue color purity as judged by the Commission Internationale de L'Eclairage (CIE) coordinates (x = 0.15,y = 0.16). These results represent the best efficiency of blue OLEDs from neat fluorescent organic emitters reported to date. These results demonstrate the potential of oligoquinolines as emitters and electron‐transport materials for developing high‐performance blue OLEDs.     

Boosting the Efficiency of Near‐Infrared Fluorescent OLEDs with an Electroluminescent Peak of Nearly 800 nm by Sensitizer‐Based Cascade Energy Transfer

A sensitization‐based cascade energy transfer channel is proposed to boost the electroluminescent performances of the solution‐processed near‐infrared organic light‐emitting devices (OLEDs) featuring an electroluminescent peak of 786 nm from a new fluorescent emitter of N⁴,N⁴,N⁹,N⁹‐tetra‐p‐tolylnaphtho[2,3‐c][1,2,5]thiadiazole‐4,9‐diamine (NZ2mDPA) with unique aggregation‐induced emission (AIE) property. The optimized device is composed of 4,4′‐N,N‐dicarbazole‐biphenyl (CBP) as the host, bis(2‐phenyl‐1,3‐benzothiozolato‐N,C^2′)iridium (Ir(bt)₂(acac)) as the sensitizer, and NZ2mDPA as the emitter, where the cascade energy transfer can occur via two steps realizing unexpected triplet–singlet energy transfer by the Förster mechanism. The first step features efficient triplet harvesting from CBP to Ir(bt)₂(acac), and then the second step involves in resonant energy transfer from the phosphorescent sensitizer to the near‐infrared AIE emitter of NZ2mDPA, which finally endows two channels of harvesting singlet and triplet excitons. The unique scheme achieves not only more efficient Förster energy transfer but also the higher utilization efficiency of triplet excitons. As a result, the near‐infrared OLEDs can realize a factor of 2.7 enhancement of external quantum efficiency by employing the phosphor‐sensitized AIE lumogen compared with the commonly used binary host–guest system.     

Crosslinkable TAPC‐Based Hole‐Transport Materials for Solution‐Processed Organic Light‐Emitting Diodes with Reduced Efficiency Roll‐Off

1‐Bis[4‐[N,N‐di(4‐tolyl)amino]phenyl]‐cyclohexane (TAPC) has been widely used in xerography and organic light‐emitting diodes (OLEDs), but derivatives are little known. Here, a new series of solution‐processable, crosslinkable hole conductors based on TAPC with varying highest occupied molecular orbital (HOMO) energies from ?5.23 eV to ?5.69 eV is implemented in blue phosphorescent OLEDs. Their superior perfomance compared with the well‐known N4,N4,N4′,N4′‐tetraphenylbiphenyl‐4,4′‐diamine (TPDs) analogues regarding hole‐injection and mobility, electron and exciton blocking capabilities, efficiency, and efficiency roll‐off is demonstrated. Overall, the TAPC‐based devices feature higher luminous and power efficiency over a broader range of brightness levels and reduced efficiency roll off. A systematic broadening of the emission zone is observed as the hole‐injection barrier between the anode and the hole‐transporting layer increased.     

High Efficiency Deep‐Blue Phosphorescent Organic Light‐Emitting Diodes with CIE x,y (≤ 0.15) and Low Efficiency Roll‐Off by Employing a High Triplet Energy Bipolar Host Material

Recently, bipolar host materials are the most promising candidates for achieving high performance phosphorescent organic light‐emitting diodes (PHOLEDs) in order to maximize recombination efficiency. However, the development of host material with high triplet energy (E _T) is still a great challenge to date to overcome the limitations associated with the present PHOLEDs. Herein, a highly efficient donor‐π‐acceptor (D‐π‐A) type bipolar host (4′‐(9H‐carbazol‐9‐yl)‐2,2′‐dimethyl‐[1,1′‐biphenyl]‐4‐yl)diphenylphosphine oxide (m‐CBPPO) comprising of carbazole, 2,2′‐dimethylbiphenyl and diphenylphosphoryl as D‐π‐A unit, respectively, is developed. Interestingly, a high E _T of 3.02 eV is observed for m‐CBPPO due to highly twisted conformation. Furthermore, the new host material is incorporated in PHOLEDs as emissive layer with a new carbene type Ir(cb)₃ material as a deep‐blue emitter. The optimized devices show an excellent external quantum efficiency (EQE) of 24.8% with a notable Commission internationale de l'éclairage (x, y) ≤ 0.15, (0.136, 0.138) and high electroluminescence performance with extremely low efficiency roll‐off. Overall, the above EQE is the highest reported for deep‐blue PHOLEDs with very low efficiency roll‐off and also indicate the importance of appropriate host for the development of high performance deep‐blue PHOLEDs.     

High‐Efficiency Deep‐Blue Light‐Emitting Diodes Based on Phenylquinoline/Carbazole‐Based Compounds

Highly efficient deep‐blue fluorescent materials based on phenylquinoline–carbazole derivatives (PhQ‐CVz, MeO‐PhQ‐CVz, and CN‐PhQ‐CVz) are synthesized for organic light‐emitting diodes (OLEDs). The materials form high‐quality amorphous thin films by thermal evaporation and the energy levels can be easily adjusted by the introduction of different electron‐donating and electron‐withdrawing groups on carbazoylphenylquinoline. Non‐doped deep‐blue OLEDs that use PhQ‐CVz as the emitter show bright emission (Commission Internationale de L'Éclairage (CIE) coordinates, x = 0.156, y = 0.093) with an external quantum efficiency of 2.45%. Furthermore, the material works as an excellent host material for 4,4′‐bis(9‐ethyl‐3‐carbazovinylene)‐1,1′‐biphenyl dopant to get high‐performance OLEDs with excellent deep‐blue CIE coordinates (x = 0.155, y = 0.157), high power efficiency (5.98 lm W^?1), and high external quantum efficiency (5.22%).     

Utilizing a Spiro TADF Moiety as a Functional Electron Donor in TADF Molecular Design toward Efficient “Multichannel” Reverse Intersystem Crossing

Designing thermally activated delayed fluorescence (TADF) materials with an efficient reverse intersystem crossing (RISC) process is regarded as the key to actualize efficient organic light‐emitting diodes (OLEDs) with low efficiency roll‐off. Herein, a novel molecular design strategy is reported where a typical TADF material 10‐phenyl‐10H, 10′H‐spiro[acridine‐9, 9′‐anthracen]‐10′‐one (ACRSA) is utilized as a functional electron donor to design TADF materials of 2,4,6‐triphenyl‐1,3,5‐triazine(TRZ)‐p‐ACRSA and TRZ‐m‐ACRSA. It is unique that the intramolecular charge transfer of the ACRSA moiety and the intramolecular and through‐space intermolecular charge transfer between the TRZ and ACRSA moieties, provide a “multichannel” effect to enhance the rate of the reverse intersystem crossing process (k_risc) exceeding 10^?6 s^?1. TADF OLEDs based on TRZ‐p‐ACRSA as an emitter show a maximum external quantum efficiency (EQE) of 28% with reduced efficiency roll‐off (EQEs of 27.5% and 22.1% at 100 and 1000 cd m^?2, respectively). Yellow phosphorescent OLEDs utilizing TRZ‐p‐ACRSA as a host material show record‐high EQE of 25.5% and power efficiency of 115 lm W^?1, while phosphorescent OLEDs based on TRZ‐m‐ACRSA show further lower efficiency roll‐off with EQEs of 25.2%, 24.3%, and 21.5% at 100, 1000, and 10 000 cd m^?2, respectively.     

White Electroluminescence from a Single‐Polymer System with Simultaneous Two‐Color Emission: Polyfluorene as the Blue Host and a 2,1,3‐Benzothiadiazole Derivative as the Orange Dopant

New single‐polymer electroluminescent systems containing two individual emission species—polyfluorenes as a blue host and 2,1,3‐benzothiadiazole derivative units as an orange dopant on the main chain—have been designed and synthesized. The resulting single polymers are found to have highly efficient white electroluminescence with simultaneous blue (λ_max = 421 nm/445 nm) and orange emission (λ_max = 564 nm) from the corresponding emitting species. The influence of the photoluminescence (PL) efficiencies of both the blue and orange species on the electroluminescence (EL) efficiencies of white polymer light‐emitting diodes (PLEDs) based on the single‐polymer systems has been investigated. The introduction of the highly efficient 4,7‐bis(4‐(N‐phenyl‐N‐(4‐methylphenyl)amino)phenyl)‐2,1,3‐benzothiadiazole unit to the main chain of polyfluorene provides significant improvement in EL efficiency. For a single‐layer device fabricated in air (indium tin oxide/poly(3,4‐ethylenedioxythiophene): poly(styrene sulfonic acid/polymer/Ca/Al), pure‐white electroluminescence with Commission Internationale de l'Eclairage (CIE) coordinates of (0.35,0.32), maximum brightness of 12 300 cd m^–2, luminance efficiency of 7.30 cd A^–1, and power efficiency of 3.34 lm W^–1 can be obtained. This device is approximately two times more efficient than that utilizing a single polyfluorene containing 1,8‐naphthalimide moieties, and shows remarkable improvement over the corresponding blend systems in terms of efficiency and color stability. Thermal treatment of the single‐layer device before cathode deposition leads to the further improvement of the device performance, with CIE coordinates of (0.35,0.34), turn‐on voltage of 3.5 V, luminance efficiency of 8.99 cd A^–1, power efficiency of 5.75 lm W^–1, external quantum efficiency of 3.8 %, and maximum brightness of 12 680 cd m^–2. This performance is roughly comparable to that of white organic light‐emitting diodes (WOLEDs) with multilayer device structures and complicated fabrication processes.     

Cover Picture: White Electroluminescence from a Single‐Polymer System with Simultaneous Two‐Color Emission: Polyfluorene as the Blue Host and a 2,1,3‐Benzothiadiazole Derivative as the Orange Dopant (Adv. Funct. Mater. 7/2006)

New single‐polymer electroluminescent systems containing two individual emission species—polyfluorenes as a blue host and 2,1,3‐benzothiadiazole derivative units as an orange dopant on the main chain—have been designed and synthesized by Wang and co‐workers on p. 957. The resulting single polymers are found to have highly efficient white electroluminescence with simultaneous blue and orange emission from the corresponding emitting species. A single‐layer device has been fabricated that has performance characteristics roughly comparable to those of organic white‐light‐emitting diodes with multilayer device structures. New single‐polymer electroluminescent systems containing two individual emission species—polyfluorenes as a blue host and 2,1,3‐benzothiadiazole derivative units as an orange dopant on the main chain—have been designed and synthesized. The resulting single polymers are found to have highly efficient white electroluminescence with simultaneous blue (λ_max = 421 nm/445 nm) and orange emission (λ_max = 564 nm) from the corresponding emitting species. The influence of the photoluminescence (PL) efficiencies of both the blue and orange species on the electroluminescence (EL) efficiencies of white polymer light‐emitting diodes (PLEDs) based on the single‐polymer systems has been investigated. The introduction of the highly efficient 4,7‐bis(4‐(N‐phenyl‐N‐(4‐methylphenyl)amino)phenyl)‐2,1,3‐benzothiadiazole unit to the main chain of polyfluorene provides significant improvement in EL efficiency. For a single‐layer device fabricated in air (indium tin oxide/poly(3,4‐ethylenedioxythiophene): poly(styrene sulfonic acid/polymer/Ca/Al), pure‐white electroluminescence with Commission Internationale de l'Eclairage (CIE) coordinates of (0.35,0.32), maximum brightness of 12 300 cd m^–2, luminance efficiency of 7.30 cd A^–1, and power efficiency of 3.34 lm W^–1 can be obtained. This device is approximately two times more efficient than that utilizing a single polyfluorene containing 1,8‐naphthalimide moieties, and shows remarkable improvement over the corresponding blend systems in terms of efficiency and color stability. Thermal treatment of the single‐layer device before cathode deposition leads to the further improvement of the device performance, with CIE coordinates of (0.35,0.34), turn‐on voltage of 3.5 V, luminance efficiency of 8.99 cd A^–1, power efficiency of 5.75 lm W^–1, external quantum efficiency of 3.8 %, and maximum brightness of 12 680 cd m^–2. This performance is roughly comparable to that of white organic light‐emitting diodes (WOLEDs) with multilayer device structures and complicated fabrication processes.     

Similar or Totally Different: The Control of Conjugation Degree through Minor Structural Modifications,and Deep‐Blue Aggregation‐Induced Emission Luminogens for Non‐Doped OLEDs

Four 4,4′‐bis(1,2,2‐triphenylvinyl)biphenyl (BTPE) derivatives, 4,4′‐bis(1,2,2‐triphenylvinyl)biphenyl, 2,3′‐bis(1,2,2‐triphenylvinyl)biphenyl, 2,4′‐bis(1,2,2‐triphenylvinyl)biphenyl, 3,3′‐bis(1,2,2‐triphenylvinyl)biphenyl and 3,4′‐bis(1,2,2‐triphenylvinyl)biphenyl (oTPE‐mTPE, oTPE‐pTPE, mTPE‐mTPE, and mTPE‐pTPE, respectively), are successfully synthesized and their thermal, optical, and electronic properties fully investigated. By merging two simple tetraphenylethene (TPE) units together through different linking positions, the π‐conjugation length is effectively controlled to ensure the deep‐blue emission. Because of the minor but intelligent structural modification, all the four fluorophores exhibit deep‐blue emissions from 435 to 459 nm with Commission Internationale de l'Eclairage (CIE) chromaticity coordinates of, respectively, (0.16, 0.14), (0.15, 0.11), (0.16, 0.14), and (0.16, 0.16), when fabricated as emitters in organic light‐emitting diodes (OLEDs). This is completely different from BTPE with sky‐blue emission (0.20, 0.36). Thus, these results may provide a novel and versatile approach for the design of deep‐blue aggregation‐induced emission (AIE) luminogens.     

Exciplex‐Forming Co‐host for Organic Light‐Emitting Diodes with Ultimate Efficiency

Phosphorescent organic light‐emitting diodes (OLEDs) with ultimate efficiency in terms of the external quantum efficiency (EQE), driving voltage, and efficiency roll‐off are reported, making use of an exciplex‐forming co‐host. This exciplex‐forming co‐host system enables efficient singlet and triplet energy transfers from the host exciplex to the phosphorescent dopant because the singlet and triplet energies of the exciplex are almost identical. In addition, the system has low probability of direct trapping of charges at the dopant molecules and no charge‐injection barrier from the charge‐transport layers to the emitting layer. By combining all these factors, the OLEDs achieve a low turn‐on voltage of 2.4 V, a very high EQE of 29.1% and a very high power efficiency of 124 lm W^?1. In addition, the OLEDs achieve an extremely low efficiency roll‐off. The EQE of the optimized OLED is maintained at more than 27.8%, up to 10 000 cd m^?2.     

A Multifunctional Iridium‐Carbazolyl Orange Phosphor for High‐Performance Two‐Element WOLED Exploiting Exciton‐Managed Fluorescence/Phosphorescence

By attaching a bulky, inductively electron‐withdrawing trifluoromethyl (CF₃) group on the pyridyl ring of the rigid 2‐[3‐ (N‐phenylcarbazolyl)]pyridine cyclometalated ligand, we successfully synthesized a new heteroleptic orange‐emitting phosphorescent iridium(III) complex [Ir( L ₁ )₂(acac)] 1 ( HL ₁ = 5‐trifluoromethyl‐2‐[3‐(N‐phenylcarbazolyl)]pyridine, Hacac = acetylacetone) in good yield. The structural and electronic properties of 1 were examined by X‐ray crystallography and time‐dependent DFT calculations. The influence of CF₃ substituents on the optical, electrochemical and electroluminescence (EL) properties of 1 were studied. We note that incorporation of the carbazolyl unit facilitates the hole‐transporting ability of the complex, and more importantly, attachment of CF₃ group provides an access to a highly efficient electrophosphor for the fabrication of orange phosphorescent organic light‐emitting diodes (OLEDs) with outstanding device performance. These orange OLEDs can produce a maximum current efficiency of ～40 cd A^?1, corresponding to an external quantum efficiency of ～12% ph/el (photons per electron) and a power efficiency of ～24 lm W^?1. Remarkably, high‐performance simple two‐element white OLEDs (WOLEDs) with excellent color stability can be fabricated using an orange triplet‐harvesting emitter 1 in conjunction with a blue singlet‐harvesting emitter. By using such a new system where the host singlet is resonant with the blue fluorophore singlet state and the host triplet is resonant with the orange phosphor triplet level, this white light‐emitting structure can achieve peak EL efficiencies of 26.6 cd A^?1 and 13.5 lm W^?1 that are generally superior to other two‐element all‐fluorophore or all‐phosphor OLED counterparts in terms of both color stability and emission efficiency.     

Low Roll‐Off and High Efficiency Orange Organic Light Emitting Diodes with Controlled Co‐Doping of Green and Red Phosphorescent Dopants in an Exciplex Forming Co‐Host

An exciplex forming co‐host is introduced in order to fabricate orange organic light‐emitting diodes (OLEDs) with high efficiency, low driving voltage and an extremely low efficiency roll‐off, by the co‐doping of green and red emitting phosphorescence dyes in the host. The orange OLEDs achieves a low turn‐on voltage of 2.4 V, which is equivalent to the triplet energy gap of the phosphorescent‐green emitting dopant, and a very high external quantum efficiency (EQE) of 25.0%. Moreover, the OLEDs show low efficiency roll‐off with an EQE of over 21% at 10 000 cdm^?2. The device displays a very good orange color (CIE of (0.501, 0.478) at 1000 cdm^?2) with very little color shift with increasing luminance. The transient electroluminescence of the OLEDs indicate that both energy transfer and direct charge trapping takes place in the devices.     

Study of Configuration Differentia and Highly Efficient,Deep‐Blue,Organic Light‐Emitting Diodes Based on Novel Naphtho[1,2‐d]imidazole Derivatives

Two novel naphtho[1,2‐d]imidazole derivatives are developed as deep‐blue, light‐emitting materials for organic light‐emitting diodes (OLEDs). The 1H‐naphtho[1,2‐d]imidazole based compounds exhibit a significantly superior performance than the 3H‐naphtho[1,2‐d]imidazole analogues in the single‐layer devices. This is because they have a much higher capacity for direct electron‐injection from the cathode compared to their isomeric counterparts resulting in a ground‐breaking EQE (external quantum efficiency) of 4.37% and a low turn‐on voltage of 2.7 V, and this is hitherto the best performance for a non‐doped single‐layer fluorescent OLED. Multi‐layer devices consisting of both hole‐ and electron‐transporting layers, result in identically excellent performances with EQE values of 4.12–6.08% and deep‐blue light emission (Commission Internationale de l'Eclairage (CIE) y values of 0.077–0.115) is obtained for both isomers due to the improved carrier injection and confinement within the emissive layer. In addition, they showed a significantly better blue‐color purity than analogous molecules based on benzimidazole or phenanthro[9,10‐d]imidazole segments.     

Solution‐Processed Highly Efficient Alternating Current‐Driven Field‐Induced Polymer Electroluminescent Devices Employing High‐k Relaxor Ferroelectric Polymer Dielectric

Organic thin‐film electroluminescent (EL) devices, such as organic light‐emitting diodes (OLEDs), typically operate using constant voltage or direct current (DC) power sources. Such approaches require power converters (introducing power losses) and make devices sensitive to dimensional variations that lead to run away currents at imperfections. Devices driven by time‐dependent voltages or alternating current (AC) may offer an alternative to standard OLED technologies. However, very little is known about how this might translate into overall performance of such devices. Here, a solution‐processed route to creating highly efficient AC field‐induced polymer EL (FIPEL) devices is demonstrated. Such solution‐processed FIPEL devices show maximum luminance, current efficiency, and power efficiency of 3000 cd m^?2, 15.8 cd A^?1, and 3.1 lm W^?1 for blue emission, 13 800 cd m^?2, 76.4 cd A^?1, and 17.1 lm W^?1 for green emission, and 1600 cd m^?2, 8.8 cd A^?1, and 1.8 lm W^?1 for orange‐red emission. The high luminance and efficiency, and solution process pave the way to industrial roll‐to‐roll manufacturing of solid state lighting and display.