All‐Cellulose‐Based Quasi‐Solid‐State Sodium‐Ion Hybrid Capacitors Enabled by Structural Hierarchy

Na‐ion hybrid capacitors consisting of battery‐type anodes and capacitor‐style cathodes are attracting increasing attention on account of the abundance of sodium‐based resources as well as the potential to bridge the gap between batteries (high energy) and supercapacitors (high power). Herein, hierarchically structured carbon materials inspired by multiscale building units of cellulose from nature are assembled with cellulose‐based gel electrolytes into Na‐ion capacitors. Nonporous hard carbon anodes are obtained through the direct thermal pyrolysis of cellulose nanocrystals. Nitrogen‐doped carbon cathodes with a coral‐like hierarchically porous architecture are prepared via hydrothermal carbonization and activation of cellulose microfibrils. The reversible charge capacity of the anode is 256.9 mAh g^?1 when operating at 0.1 A g^?1 from 0 to 1.5 V versus Na⁺/Na, and the discharge capacitance of cathodes tested within 1.5 to 4.2 V versus Na⁺/Na is 212.4 F g^?1 at 0.1 A g^?1. Utilizing Na⁺ and ClO₄^? as charge carriers, the energy density of the full Na‐ion capacitor with two asymmetric carbon electrodes can reach 181 Wh kg^?1 at 250 W kg^?1, which is one of the highest energy devices reported until now. Combined with macrocellulose‐based gel electrolytes, all‐cellulose‐based quasi‐solid‐state devices are demonstrated possessing additional advantages in terms of overall sustainability.     

A High‐Performance Sodium‐Ion Hybrid Capacitor Constructed by Metal–Organic Framework–Derived Anode and Cathode Materials

Sodium‐ion hybrid capacitors (SIHCs) can potentially combine the virtues of high‐energy density of batteries and high‐power output as well as long cycle life of capacitors in one device. The key point of constructing a high‐performance SIHC is to couple appropriate anode and cathode materials, which can well match in capacity and kinetics behavior simultaneously. In this work, a novel SIHC, coupling a titanium dioxide/carbon nanocomposite (TiO₂/C) anode with a 3D nanoporous carbon cathode, which are both prepared from metal–organic frameworks (MOFs, MIL‐125 (Ti) and ZIF‐8, respectively), is designed and fabricated. The robust architecture and extrinsic pseudocapacitance of TiO₂/C nanocomposite contribute to the excellent cyclic stability and rate capability in half‐cell. Hierarchical 3D nanoporous carbon displays superior capacity and rate performance. Benefiting from the merits of structures and performances of anode and cathode materials, the as‐built SIHC achieves a high energy density of 142.7 W h kg^?1 and a high power output of 25 kW kg^?1 within 1–4 V, as well as an outstanding life span of 10 000 cycles with over 90% of the capacity retention. The results make it competitive in high energy and power–required electricity storage applications.     

Empowering Metal Phosphides Anode with Catalytic Attribute toward Superior Cyclability for Lithium‐Ion Storage

Due to high capacity, moderate redox voltage, and relatively low polarization, metal phosphides (MPs) attract much attention as viable anode materials for lithium‐ion storage. However, severe capacity decay induced by the poor reversibility of discharge product (Li₃P) in these anodes suppresses their practical applications. Herein, it is first revealed that N‐doped carbon can effectively catalyze the oxidation of Li₃P by density functional theory calculations and activation experiments. By anchoring Ni₂P nanoparticles on N‐doped carbon sheets (Ni₂P@N‐C) via a facile method, an MP‐based anode rendered with a catalytic attribute is successfully fabricated for improving the reversibility of Li₃P during lithium‐ion storage. Benefiting from this design, not only can high capacity and rate performance be reached, but also an extraordinary cyclability and capacity retention be realized, which is the best among all other phosphides reported so far. By employing such a Ni₂P@N‐C composite and a commercialized active carbon as the anode and cathode, respectively, hybrid lithium‐ion capacitors can be fabricated with an ultrahigh energy density of 80 Wh kg^?1 at a power density of 12.5 kW kg^?1. This strategy of designing electrodes may be generalized to other energy storage systems whose cycling performance needs to be improved.     

Fast and Large Lithium Storage in 3D Porous VN Nanowires–Graphene Composite as a Superior Anode Toward High‐Performance Hybrid Supercapacitors

Li‐ion hybrid capacitors (LIHCs), consisting of an energy‐type redox anode and a power‐type double‐layer cathode, are attracting significant attention due to the good combination with the advantages of conventional Li‐ion batteries and supercapacitors. However, most anodes are battery‐like materials with the sluggish kinetics of Li‐ion storage, which seriously restrict the energy storage of LIHCs at the high charge/discharge rates. Herein, vanadium nitride (VN) nanowire is demonstated to have obvious pseudocapacitive characteristic of Li‐ion storage and can get further gains in energy storage through a 3D porous architecture with the assistance of conductive reduced graphene oxide (RGO). The as‐prepared 3D VN–RGO composite exhibits the large Li‐ion storage capacity and fast charge/discharge rate within a wide working widow from 0.01–3 V (vs Li/Li⁺), which could potentially boost the operating potential and the energy and power densities of LIHCs. By employing such 3D VN–RGO composite and porous carbon nanorods with a high surface area of 3343 m² g^?1 as the anode and cathode, respectively, a novel LIHCs is fabricated with an ultrahigh energy density of 162 Wh kg^?1 at 200 W kg^?1, which also remains 64 Wh kg^?1 even at a high power density of 10 kW kg^?1.     

A Simple Electrode‐Level Chemical Presodiation Route by Solution Spraying to Improve the Energy Density of Sodium‐Ion Batteries

The formation of a solid electrolyte interface (SEI) on the surface of a carbon anode consumes the active sodium ions from the cathode and reduces the energy density of sodium‐ion batteries (SIBs). Herein, a simple electrode‐level presodiation strategy by spraying a sodium naphthaline (Naph‐Na) solution onto a carbon electrode is reported, which compensates the initial sodium loss and improves the energy density of SIBs. After presodiation, an SEI layer is preformed on the surface of carbon anode before battery cycling. It is shown that a large irreversible capacity of 60 mAh g^?1 is replenished and 20% increase of the first‐cycle Coulombic efficiency is achieved for a hard carbon anode using this presodiation strategy, and the energy density of a Na_0.9[Cu_0.22Fe_0.30Mn_0.48]O₂||carbon full cell is increased from 141 to 240 Wh kg^?1 by using the presodiated carbon anode. This simple and scalable electrode‐level chemical presodiation route also shows generality and value for the presodiation of other anodes in SIBs.     

High Reversible Pseudocapacity in Mesoporous Yolk–Shell Anatase TiO2/TiO2(B) Microspheres Used as Anodes for Li‐Ion Batteries

As an anode material for lithium‐ion batteries, titanium dioxide (TiO₂) shows good gravimetric performance (336 mAh g^?1 for LiTiO₂) and excellent cyclability. To address the poor rate behavior, slow lithium‐ion (Li⁺) diffusion, and high irreversible capacity decay, TiO₂ nanomaterials with tuned phase compositions and morphologies are being investigated. Here, a promising material is prepared that comprises a mesoporous “yolk–shell” spherical morphology in which the core is anatase TiO₂ and the shell is TiO₂(B). The preparation employs a NaCl‐assisted solvothermal process and the electrochemical results indicate that the mesoporous yolk–shell microspheres have high specific reversible capacity at moderate current (330.0 mAh g^?1 at C/5), excellent rate performance (181.8 mAh g^?1 at 40C), and impressive cyclability (98% capacity retention after 500 cycles). The superior properties are attributed to the TiO₂(B) nanosheet shell, which provides additional active area to stabilize the pseudocapacity. In addition, the open mesoporous morphology improves diffusion of electrolyte throughout the electrode, thereby contributing directly to greatly improved rate capacity.     

Fabrication and Shell Optimization of Synergistic TiO2‐MoO3 Core–Shell Nanowire Array Anode for High Energy and Power Density Lithium‐Ion Batteries

A novel synergistic TiO₂‐MoO₃ (TO‐MO) core–shell nanowire array anode has been fabricated via a facile hydrothermal method followed by a subsequent controllable electrodeposition process. The nano‐MoO₃ shell provides large specific capacity as well as good electrical conductivity for fast charge transfer, while the highly electrochemically stable TiO₂ nanowire core (negligible volume change during Li insertion/desertion) remedies the cycling instability of MoO₃ shell and its array further provides a 3D scaffold for large amount electrodeposition of MoO₃. In combination of the unique electrochemical attributes of nanostructure arrays, the optimized TO‐MO hybrid anode (mass ratio: ca. 1:1) simultaneously exhibits high gravimetric capacity (ca. 670 mAh g^?1; approaching the hybrid's theoretical value), excellent cyclability (>200 cycles) and good rate capability (up to 2000 mA g^?1). The areal capacity is also as high as 3.986 mAh cm^?2, comparable to that of typical commercial LIBs. Furthermore, the hybrid anode was assembled for the first time with commercial LiCoO₂ cathode into a Li ion full cell, which shows outstanding performance with maximum power density of 1086 W kg_total ^?1 (based on the total mass of the TO‐MO and LiCoO₂) and excellent energy density (285 Wh kg_total ^?1) that is higher than many previously reported metal oxide anode‐based Li full cells.     

A New rGO‐Overcoated Sb2Se3 Nanorods Anode for Na+ Battery: In Situ X‐Ray Diffraction Study on a Live Sodiation/Desodiation Process

Sodium ion batteries (SIBs) are a promising alternative to lithium ion batteries for a broader range of energy storage applications in the future. However, the development of high‐performance anode materials is a bottleneck of SIBs advancement. In this work, Sb₂Se₃ nanorods uniformly wrapped by reduced graphene oxide (rGO) as a promising anode material for SIBs are reported. The results show that such Sb₂Se₃/rGO hybrid anode yields a high reversible mass‐specific energy capacity of 682, 448, and 386 mAh g^?1 at a rate of 0.1, 1.0, and 2.0 A g^?1, respectively, and sustains at least 500 stable cycles at a rate of 1.0 A g^?1 with an average mass‐specific energy capacity of 417 mAh g^?1 and capacity retention of 90.2%. In situ X‐ray diffraction study on a live SIB cell reveals that the observed high performance is a result of the combined Na⁺ intercalation, conversion reaction between Na⁺ and Se, and alloying reaction between Na⁺ and Sb. The presence of rGO also plays a key role in achieving high rate capacity and cycle stability by providing good electrical conductivity, tolerant accommodation to volume change, and strong electron interactions to the base Sb₂Se₃ anode.     

Atomic Sulfur Covalently Engineered Interlayers of Ti3C2 MXene for Ultra‐Fast Sodium‐Ion Storage by Enhanced Pseudocapacitance

2D MXenes have been widely applied in the field of electrochemical energy storage owning to their high electrical conductivity and large redox‐active surface area. However, electrodes made from multilayered MXene with small interlayer spacing exhibit sluggish kinetics with low capacity for sodium‐ion storage. Herein, Ti₃C₂ MXene with expanded and engineered interlayer spacing for excellent storage capability is demonstrated. After cetyltrimethylammonium bromide pretreatment, S atoms are successfully intercalated into the interlayer of Ti₃C₂ to form a desirable interlayer‐expanded structure via Ti? S bonding, while pristine Ti₃C₂ is hardly to be intercalated. When the annealing temperature is 450 °C, the S atoms intercalated Ti₃C₂ (CT‐S@Ti₃C₂‐450) electrode delivers the improved Na‐ion capacity of 550 mAh g^?1 at 0.1 A g^?1 (≈120 mAh g^?1 at 15 A g^?1, the best MXene‐based Na⁺‐storage rate performance reported so far), and excellent cycling stability over 5000 cycles at 10 A g^?1 by enhanced pseudocapacitance. The enhanced sodium‐ion storage capability has also been verified by theoretical calculations and kinetic analysis. Coupling the CT‐S@Ti₃C₂‐450 anode with commercial AC cathode, the assembled Na⁺ capacitor delivers high energy density (263.2 Wh kg^?1) under high power density (8240 W kg^?1), and outstanding cycling performance.     

Metal–Organic Framework (MOF) Derived Electrodes with Robust and Fast Lithium Storage for Li‐Ion Hybrid Capacitors

Hybrid metal–organic frameworks (MOFs) demonstrate great promise as ideal electrode materials for energy‐related applications. Herein, a well‐organized interleaved composite of graphene‐like nanosheets embedded with MnO₂ nanoparticles (MnO₂@C‐NS) using a manganese‐based MOF and employed as a promising anode material for Li‐ion hybrid capacitor (LIHC) is engineered. This unique hybrid architecture shows intriguing electrochemical properties including high reversible specific capacity 1054 mAh g^?1 (close to the theoretical capacity of MnO₂, 1232 mAh g^?1) at 0.1 A g^?1 with remarkable rate capability and cyclic stability (90% over 1000 cycles). Such a remarkable performance may be assigned to the hierarchical porous ultrathin carbon nanosheets and tightly attached MnO₂ nanoparticles, which provide structural stability and low contact resistance during repetitive lithiation/delithiation processes. Moreover, a novel LIHC is assembled using a MnO₂@C‐NS anode and MOF derived ultrathin nanoporous carbon nanosheets (derived from other potassium‐based MOFs) cathode materials. The LIHC full‐cell delivers an ultrahigh specific energy of 166 Wh kg^?1 at 550 W kg^?1 and maintained to 49.2 Wh kg^?1 even at high specific power of 3.5 kW kg^?1 as well as long cycling stability (91% over 5000 cycles). This work opens new opportunities for designing advanced MOF derived electrodes for next‐generation energy storage devices.     

Sodium Storage Behavior in Natural Graphite using Ether‐based Electrolyte Systems

This work reports that natural graphite is capable of Na insertion and extraction with a remarkable reversibility using ether‐based electrolytes. Natural graphite (the most well‐known anode material for Li–ion batteries) has been barely studied as a suitable anode for Na rechargeable batteries due to the lack of Na intercalation capability. Herein, graphite is not only capable of Na intercalation but also exhibits outstanding performance as an anode for Na ion batteries. The graphite anode delivers a reversible capacity of ≈150 mAh g^?1 with a cycle stability for 2500 cycles, and more than 75 mAh g^?1 at 10 A g^?1 despite its micrometer‐size (≈100 μm). An Na storage mechanism in graphite, where Na⁺‐solvent co‐intercalation occurs combined with partial pseudocapacitive behaviors, is revealed in detail. It is demonstrated that the electrolyte solvent species significantly affect the electrochemical properties, not only rate capability but also redox potential. The feasibility of graphite in a Na full cell is also confirmed in conjunction with the Na_1.5VPO_4.8F_0.7 cathode, delivering an energy of ≈120 Wh kg^?1 while maintaining ≈70% of the initial capacity after 250 cycles. This exceptional behavior of natural graphite promises new avenues for the development of cost‐effective and reliable Na ion batteries.     

FeP Quantum Dots Confined in Carbon‐Nanotube‐Grafted P‐Doped Carbon Octahedra for High‐Rate Sodium Storage and Full‐Cell Applications

Transition metal phosphides (TMPs) possess high theoretical sodium storage capacities, but suffer from poor rate performance, due to their intrinsic low conductivity and large volume expansion upon sodiation/desodiation. Compositing TMPs with carbon materials or downsizing their feature size are recognized as efficient approaches to address the above issues. Nevertheless the surface‐controlled capacitive behavior is generally dominated, which inevitably compromises the charge/discharge platform, and decreases the operational potential window in full‐cell constructions. In this work, a novel architecture (FeP@OCF) with FeP quantum dots confined in P‐doped 3D octahedral carbon framework/carbon nanotube is rationally designed. Such structure enables a simultaneous enhancement on the diffusion‐controlled capacity in the platform region (2.3 folds), and the surface‐controlled capacity in the slope region (2.9 folds) as compared to that of pure FeP. As a result, an excellent reversible capacity (674 mAh g^?1@ 0.1 A g^?1) and a record high‐rate performance (262 mAh g^?1 @ 20 A g^?1) are achieved. A full‐cell FeP@OCF// Na₃V₂(PO₄)₃ is also constructed showing an outstandingly high energy density of 185 Wh kg^?1 (based on the total mass of active materials in both electrodes), which outperforms the state‐of‐the art TMP‐based sodium‐ion battery full cells.     

A High‐Energy Lithium‐Ion Capacitor by Integration of a 3D Interconnected Titanium Carbide Nanoparticle Chain Anode with a Pyridine‐Derived Porous Nitrogen‐Doped Carbon Cathode

Lithium‐ion capacitors (LICs) are hybrid energy storage devices that have the potential to bridge the gap between conventional high‐energy lithium‐ion batteries and high‐power capacitors by combining their complementary features. The challenge for LICs has been to improve the energy storage at high charge?discharge rates by circumventing the discrepancy in kinetics between the intercalation anode and capacitive cathode. In this article, the rational design of new nanostructured LIC electrodes that both exhibit a dominating capacitive mechanism (both double layer and pseudocapacitive) with a diminished intercalation process, is reported. Specifically, the electrodes are a 3D interconnected TiC nanoparticle chain anode, synthesized by carbothermal conversion of graphene/TiO₂ hybrid aerogels, and a pyridine‐derived hierarchical porous nitrogen‐doped carbon (PHPNC) cathode. Electrochemical properties of both electrodes are thoroughly characterized which demonstrate their outstanding high‐rate capabilities. The fully assembled PHPNC//TiC LIC device delivers an energy density of 101.5 Wh kg^?1 and a power density of 67.5 kW kg^?1 (achieved at 23.4 Wh kg^?1), and a reasonably good cycle stability (≈82% retention after 5000 cycles) within the voltage range of 0.0?4.5 V.     

High‐Performance Manganese Hexacyanoferrate with Cubic Structure as Superior Cathode Material for Sodium‐Ion Batteries

Sodium manganese hexacyanoferrate (Na_xMnFe(CN)₆) is one of the most promising cathode materials for sodium‐ion batteries (SIBs) due to the high voltage and low cost. However, its cycling performance is limited by the multiple phase transitions during Na⁺ insertion/extraction. In this work, a facile strategy is developed to synthesize cubic and monoclinic structured Na_xMnFe(CN)₆, and their structure evolutions are investigated through in situ X‐ray diffraction (XRD), ex situ Raman, and X‐ray photoelectron spectroscopy (XPS) characterizations. It is revealed that the monoclinic phase undergoes undesirable multiple two‐phase reactions (monoclinic ? cubic ? tetragonal) due to the large lattice distortions caused by the Jahn–Teller effects of Mn³⁺, resulting in poor cycling performances with 38% capacity retention. The cubic Na_xMnFe(CN)₆ with high structural symmetry maintains the structural stability during the repeated Na⁺ insertion/extraction process, demonstrating impressive electrochemical performances with specific capacity of ≈120 mAh g^?1 at 3.5 V (vs Na/Na⁺), capacity retention of ≈70% over 500 cycles at 200 mA g^?1. In addition, the TiO₂//C‐MnHCF full battery is fabricated with an energy density of 111 Wh kg^?1, suggesting the great potential of cubic Na_xMnFe(CN)₆ for practical energy storage applications.     

3D Carbon Nanotube Network Bridged Hetero‐Structured Ni‐Fe‐S Nanocubes toward High‐Performance Lithium,Sodium, and Potassium Storage

Lithium‐ion, sodium‐ion, and potassium‐ion batteries have captured tremendous attention in power supplies for various electric vehicles and portable electronic devices. However, their practical applications are severely limited by factors such as poor rate capability, fast capacity decay, sluggish charge storage dynamics, and low reversibility. Herein, hetero‐structured bimetallic sulfide (NiS/FeS) encapsulated in N‐doped porous carbon cubes interconnected with CNTs (Ni‐Fe‐S‐CNT) are prepared through a convenient co‐precipitation and post‐heat treatment sulfurization technique of the corresponding Prussian‐blue analogue nanocage precursor. This special 3D hierarchical structure can offer a stable interconnect and conductive network and shorten the diffusion path of ions, thereby greatly enhancing the mobility efficiency of alkali (Li, Na, K) ions in electrode materials. The Ni‐Fe‐S‐CNT nanocomposite maintains a charge capacity of 1535 mAh g^?1 at 0.2 A g^?1 for lithium ion batteries, 431 mAh g^?1 at 0.1 A g^?1 for sodium ion batteries, and 181 mAh g^?1 at 0.1 A g^?1 for potassium‐ion batteries, respectively. The high performance is mainly attributed to the 3D hierarchically high‐conductivity network architecture, in which the hetero‐structured FeS/NiS nanocubes provide fast Li⁺/Na⁺/K⁺ insertion/extraction and reduced ion diffusion paths, and the distinctive 3D networks maintain the electrical contact and guarantee the structural integrity.     

Fast Potassium Storage in Hierarchical Ca0.5Ti2(PO4)3@C Microspheres Enabling High‐Performance Potassium‐Ion Capacitors

Hybrid potassium‐ion capacitors (KICs) show great promise for large‐scale storage on the power grid because of cost advantages, the weaker Lewis acidity of K⁺ and low redox potential of K⁺/K. However, a huge challenge remains for designing high‐performance K⁺ storage materials since K⁺ ions are heavier and larger than Li⁺ and Na⁺. Herein, the synthesis of hierarchical Ca_0.5Ti₂(PO₄)₃@C microspheres by use of the electrospraying method is reported. Benefiting from the rich vacancies in the crystal structure and rational nanostructural design, the hybrid Ca_0.5Ti₂(PO₄)₃@C electrode delivers a high reversible capacity (239 mA h g^?1) and superior rate performance (63 mA h g^?1 at 5 A g^?1). Moreover, the KIC employing a Ca_0.5Ti₂(PO₄)₃@C anode and activated carbon cathode, affords a high energy/power density (80 W h kg^?1 and 5144 W kg^?1) in a potential window of 1.0–4.0 V, as well as a long lifespan of over 4000 cycles. In addition, in situ X‐ray diffraction is used to unravel the structural transition in Ca_0.5Ti₂(PO₄)₃, suggesting a two‐phase transition above 0.5 V during the initial discharge and solid solution processes during the subsequent K⁺ insertion/extraction. The present study demonstrates a low‐cost potassium‐based energy storage device with high energy/power densities and a long lifespan.     

Pseudocapacitive Trimetal Fe0.8CoMnO4 Nanoparticles@Carbon Nanofibers as High‐Performance Sodium Storage Anode with Self‐Supported Mechanism

Trimetal Fe_0.8CoMnO₄ (FCMO) nanocrystals with a diameter of about 50 nm perfectly embedded in N doped‐carbon composite nanofibers (denoted as FCMO@C) are successfully prepared through integrating double‐nozzle electrospinning with a drying and calcination process. The as‐prepared FCMO@C nanofibers maintain a high reversible capacity of 420 mAh g^?1 and about 90% capacity retention after 200 cycles at 0.1 A g^?1. For a long‐term cycle, the FCMO@C electrode exhibits excellent cycling stability (87% high capacity retention at 1 A g^?1 after 950 cycles). Kinetic analysis demonstrates that the electrochemical characteristics of the FCMO@C corresponds to the pseudocapacitive approach in charge storage as an anode for sodium ion batteries, which dominantly attributes the credit to FCMO nanocrystals to shorten the migration distance of Na⁺ ions and the nitrogen‐doped carbon skeleton to enhance the electronic transmission and favorably depress the volume expansion during the repeated insertion/extraction of Na⁺ ions. More significantly, a self‐supported mechanism via continuous electrochemical redox reaction of Fe, Co, and Mn can effectively relieve the volume change during charge and discharge. Therefore, this work can provide a new avenue to improve the sodium storage performance of the oxide anode materials.     

Dual‐Doped Hematite Nanorod Arrays on Carbon Cloth as a Robust and Flexible Sodium Anode

Rechargeable batteries with flexibility can find tremendous applications in wearable and bendable electronics. One central mission for the advancement of such high‐performance batteries is the exploration of flexible anodes with electrochemical and mechanical robustness. Herein reported is a robust and flexible sodium‐ion anode based on self‐supported hematite nanoarray grown on carbon cloth. The ammonia treatment that results in dual doping of both nitrogen and low‐valent iron renders surface reactivity and electric conductivity to the material. The dual‐doped hematite arrays afford a robust activity for sodium storage, exhibiting reversible capacities of 895 and 382 mAh g^?1 at current rates of 0.1 and 5 A g^?1, respectively, or 615 and 356 mAh g^?1 by removing the contribution of the substrate. They also sustain 85% of the initial capacity upon 200 cycles at 0.2 A g^?1. To demonstrate the flexibility, full cells composed of a hematite array anode and Na₃V₂(PO₄)₃/C cathode are assembled. The cell is capable of affording an energy density of 201 Wh kg^?1 and sustaining repeated bending without performance decay, demonstrating a significant potential in practical application.     

Electrochemically Derived Graphene‐Like Carbon Film as a Superb Substrate for High‐Performance Aqueous Zn‐Ion Batteries

3D graphene, as a light substrate for active loadings, is essential to achieve high energy density for aqueous Zn‐ion batteries, yet traditional synthesis routes are inefficient with high energy consumption. Reported here is a simplified procedure to transform the raw graphite paper directly into the graphene‐like carbon film (GCF). The electrochemically derived GCF contains a 2D–3D hybrid network with interconnected graphene sheets, and offers a highly porous structure. To realize high energy density, the Na:MnO₂/GCF cathode and Zn/GCF anode are fabricated by electrochemical deposition. The GCF‐based Zn‐ion batteries deliver a high initial discharge capacity of 381.8 mA h g^?1 at 100 mA g^?1 and a reversible capacity of 188.0 mA h g^?1 after 1000 cycles at 1000 mA g^?1. Moreover, a recorded energy density of 511.9 Wh kg^?1 is obtained at a power density of 137 W kg^?1. The electrochemical kinetics measurement reveals the high capacitive contribution of the GCF and a co‐insertion/desertion mechanism of H⁺ and Zn²⁺ ions. First‐principles calculations are also carried out to investigate the effect of Na⁺ doping on the electrochemical performance of layered δ‐MnO₂ cathodes. The results demonstrate the attractive potential of the GCF substrate in the application of the rechargeable batteries.     

Watermelon‐Like Structured SiOx–TiO2@C Nanocomposite as a High‐Performance Lithium‐Ion Battery Anode

A unique watermelon‐like structured SiO_x–TiO₂@C nanocomposite is synthesized by a scalable sol–gel method combined with carbon coating process. Ultrafine TiO₂ nanocrystals are uniformly embedded inside SiO_x particles, forming SiO_x–TiO₂ dual‐phase cores, which are coated with outer carbon shells. The incorporation of TiO₂ component can effectively enhance the electronic and lithium ionic conductivities inside the SiO_x particles, release the structure stress caused by alloying/dealloying of Si component and maximize the capacity utilization by modifying the Si–O bond feature and decreasing the O/Si ratio (x‐value). The synergetic combination of these advantages enables the synthesized SiO_x–TiO₂@C nanocomposite to have excellent electrochemical performances, including high specific capacity, excellent rate capability, and stable long‐term cycleability. A stable specific capacity of ≈910 mAh g^?1 is achieved after 200 cycles at the current density of 0.1 A g^?1 and ≈700 mAh g^?1 at 1 A g^?1 for over 600 cycles. These results suggest a great promise of the proposed particle architecture, which may have potential applications in the improvement of various energy storage materials.