Solution‐Processed Self‐Powered Transparent Ultraviolet Photodetectors with Ultrafast Response Speed for High‐Performance Communication System

Transparent ultraviolet (UV) photodetectors are an essential component of next‐generation “see‐through” electronics. However, the current photodetectors often suffer from relatively slow response speeds and high driving voltages. Here, all‐solution‐processed UV photodetectors are reported that are facilely prepared from environmentally friendly and abundant materials. The UV photodetectors are composed of a titanium dioxide thin film as the photosensitive layer sandwiched between two different transparent electrodes to form asymmetric Schottky junctions. The photodetector with high optical transparency can operate at zero bias because of spontaneous separation of photogenerated electron–hole pairs by the built‐in electric field. The resulting self‐powered photodetector displays high sensitivity to broadband UV light (200–400 nm). In particular, an ultrafast response speed up to 44 ns is obtained, representing a significant improvement over those of the conventional transparent photodetectors. Moreover, the photodetector has been successfully applied, for the first time, in a UV communication system as the self‐powered signal receiver. This work uniquely combines the features of high optical transparency and self‐power ability into UV photodetectors and would enable a broad range of optoelectronic applications.     

Low‐Bandgap Methylammonium‐Rubidium Cation Sn‐Rich Perovskites for Efficient Ultraviolet–Visible–Near Infrared Photodetectors

Solution‐processed and low‐temperature Sn‐rich perovskites show their low bandgap of about 1.2 eV, enabling potential applications in next‐generation cost‐effective ultraviolet (UV)–visible (vis)–near infrared (NIR) photodetection. Particularly, the crystallization (crystallinity and orientation) and film (smooth and dense film) properties of Sn‐rich perovskites are critical for efficient photodetectors, but are limitedly studied. Here, controllable crystallization for growing high‐quality films with the improvements of increased crystallinity and strengthened preferred orientation through a introducing rubidium cation into the methylammonium Sn‐Pb perovskite system (65% Sn) is achieved. Fundamentally, the theoretical results show that rubidium incorporation causes lower surface energy of (110) plane, facilitating growth in the dominating plane and suppressing growth of other competing planes. Consequently, the methylammonium‐rubidium Sn‐Pb perovskite photodetectors simultaneously achieve larger photocurrent and lower noise current. Finally, highly efficient UV–vis–NIR (300–1100 nm) photodetectors with record‐high linear dynamic range of 110 and 3 dB cut‐off frequency reaching 1 MHz are demonstrated. This work contributes to enriching the cation selection in Sn‐Pb perovskite systems and offering a promising candidate for low‐cost UV–vis–NIR photodetection.     

A Review of Low‐Temperature Solution‐Processed Metal Oxide Thin‐Film Transistors for Flexible Electronics

Solution processing, including printing technology, is a promising technique for oxide thin‐film transistor (TFTs) fabrication because it tends to be a cost‐effective process with high composition controllability and high throughput. However, solution‐processed oxide TFTs are limited by low‐performance and stability issues, which require high‐temperature annealing. This high thermal budget in the fabrication process inhibits oxide TFTs from being applied to flexible electronics. There have been numerous attempts to promote the desired electrical characteristics of solution‐processed oxide TFTs at lower fabrication temperatures. Recent techniques for achieving low‐temperature (<350 °C) solution‐processed and printed oxide TFTs, in terms of the materials, processes, and structural engineering methods currently in use are reviewed. Moreover, the core techniques for both n‐type and p‐type oxide‐based channel layers, gate dielectric layers, and electrode layers in oxide TFTs are addressed. Finally, various multifunctional and emerging applications based on low‐temperature solution‐processed oxide TFTs are introduced and future outlooks for this highly promising research are suggested.     

Unraveling the Gain Mechanism in High Performance Solution‐Processed PbS Infrared PIN Photodiodes

High gain and low dark current solution‐processed colloidal PbS quantum dots infrared (IR) PIN photodetectors with IR sensitivity up to 1500 nm are demonstrated. The low dark current is due to the P‐I‐N structure with both electron and hole blockers. The high gain in our IR photodiodes is due to the enhancement of electron tunneling injection through the 1,1‐bis[(di‐4‐tolylamino) phenyl]cyclohexane (TAPC) electron blocker under IR illumination resulting from a distorted electron blocking barrier in the presence of photo‐generated holes trapped in the TAPC electron blocker. It is further found that the trap states in the TAPC layer are generated by the Ag atoms penetrated in the TAPC layer during the thermal evaporation process. The resulting photodetectors have a high detectivity value of 7 × 10¹³ Jones, which is even higher than that of a commercial InGaAs photodiode.     

All‐Solution‐Processed Indium‐Free Transparent Composite Electrodes based on Ag Nanowire and Metal Oxide for Thin‐Film Solar Cells

Fully solution‐processed Al‐doped ZnO/silver nanowire (AgNW)/Al‐doped ZnO/ZnO multi‐stacked composite electrodes are introduced as a transparent, conductive window layer for thin‐film solar cells. Unlike conventional sol–gel synthetic pathways, a newly developed combustion reaction‐based sol–gel chemical approach allows dense and uniform composite electrodes at temperatures as low as 200 °C. The resulting composite layer exhibits high transmittance (93.4% at 550 nm) and low sheet resistance (11.3 Ω sq^‐1), which are far superior to those of other solution‐processed transparent electrodes and are comparable to their sputtered counterparts. Conductive atomic force microscopy reveals that the multi‐stacked metal‐oxide layers embedded with the AgNWs enhance the photocarrier collection efficiency by broadening the lateral conduction range. This as‐developed composite electrode is successfully applied in Cu(In_1‐x,Ga_x)S₂ (CIGS) thin‐film solar cells and exhibits a power conversion efficiency of 11.03%. The fully solution‐processed indium‐free composite films demonstrate not only good performance as transparent electrodes but also the potential for applications in various optoelectronic and photovoltaic devices as a cost‐effective and sustainable alternative electrode.     

Low‐Noise Multispectral Photodetectors Made from All Solution‐Processed Inorganic Semiconductors

Infrared, visible, and multispectral photodetectors are important components for sensing, security and electronics applications. Current fabrication of these devices is based on inorganic materials grown by epitaxial techniques which are not compatible with low‐cost large‐scale processing. Here, air‐stable multispectral solution‐processed inorganic double heterostructure photodetectors, using PbS quantum dots (QDs) as the photoactive layer, colloidal ZnO nanoparticles as the electron transport/hole blocking layer (ETL/HBL), and solution‐derived NiO as the hole transport/electron blocking layer (HTL/EBL) are reported. The resulting device has low dark current density of 20 nA cm^‐2 with a noise equivalent power (NEP) on the order of tens of picowatts across the detection spectra and a specific detectivity (D*) value of 1.2 × 10¹² cm Hz^1/2 W^‐1. These parameters are comparable to commercially available Si, Ge, and InGaAs photodetectors. The devices have a linear dynamic range (LDR) over 65 dB and a bandwidth over 35 kHz, which are sufficient for imaging applications. Finally, these solution‐processed inorganic devices have a long storage lifetime in air, even without encapsulation.     

Epitaxial Growth of PbSe Quantum Dots on MoS2 Nanosheets and their Near‐Infrared Photoresponse

A facile one‐pot synthesis of hybrid materials consisting of PbSe quantum dots (QDs) that grow epitaxially on MoS₂ nanoflakes resulting in three equivalent orientation variants of the PbSe QDs with respect to the MoS₂ lattice is demonstrated. The epitaxial growth and cross‐sectional high‐resolution transmission electron microscopy (HRTEM) investigations verify a direct and linker‐free contact between the quantum dots and the transition metal dichalcogenide (TMD) nanoflakes, while maintaining surface passivation of the PbSe with oleic acid ligands on the outside. Solution‐processed photodetectors based on PbSe‐MoS₂ hybrids exhibit stable photoconduction when illuminated with near‐IR light (wavelength > 1200 nm) without any laborious ligand‐exchange steps. Flexible devices fabricated on polyethylene terephthalate (PET) substrates show excellent stability upon repeated bending. These hybrid materials are air‐stable and solution‐processable at low temperatures and thus promising for low‐cost flexible near‐IR photodetectors.     

Highly Sensitive Low‐Bandgap Perovskite Photodetectors with Response from Ultraviolet to the Near‐Infrared Region

It is a great challenge to obtain broadband response perovskite photodetectors (PPDs) due to the relatively large bandgaps of the most used methylammonium lead halide perovskites. The response range of the reported PPDs is limited in the ultraviolet–visible range. Here, highly sensitive PPDs are successfully fabricated with low bandgap (≈1.25 eV) (FASnI₃)_0.6(MAPbI₃)_0.4 perovskite as active layers, exhibiting a broadband response from 300 to 1000 nm. The performance of the PPDs can be optimized by adjusting the thicknesses of the perovskite and C₆₀ layers. The optimized PPDs with 1000 nm thick perovskite layer and 70 nm thick C₆₀ layer exhibit an almost flat external quantum efficiency (EQE) spectrum from 350 to 900 nm with EQE larger than 65% under ?0.2 V bias. Meanwhile, the optimized PPDs also exhibit suppressed dark current of 3.9 nA, high responsivity (R ) of over 0.4 A W^?1, high specific detectivity (D* ) of over 10¹² Jones in the near‐infrared region under ?0.2 V. Such highly sensitive broadband response PPDs, which can work well as self‐powered conditions, offer great potential applications in multicolor light detection.     

High Responsivity and Response Speed Single‐Layer Mixed‐Cation Lead Mixed‐Halide Perovskite Photodetectors Based on Nanogap Electrodes Manufactured on Large‐Area Rigid and Flexible Substrates

Mixed‐cation lead mixed‐halide perovskites are employed as the photoactive material in single‐layer solution‐processed photodetectors fabricated with coplanar asymmetric nanogap Al–Au and indium tin oxide–Al electrodes. The nanogap electrodes, bearing an interelectrode distance of ≈10 nm, are patterned via adhesion lithography, a simple, low‐cost, and high‐throughput technique. Different electrode shapes and sizes are demonstrated on glass and flexible plastic substrates, effectively engineering the device architecture, and, along with perovskite film and material optimization, paving the way toward devices with tunable operational characteristics. The optimized coplanar nanogap junction perovskite photodetectors show responsivities up to 33 A W^?1, specific detectivity on the order of 10¹¹ Jones, and response times below 260 ns, while retaining a low dark current (0.3 nA) under ?2 V reverse bias. These values outperform the vast majority of perovskite photodetectors reported so far, while avoiding the complicated fabrication steps involved in conventional multilayer device structures. This work highlights the promising potential of the proposed asymmetric nanogap electrode architecture for application in the field of flexible optoelectronics.     

Molecule Charge Transfer Doping for p‐Channel Solution‐Processed Copper Oxide Transistors

The doping of semiconductors plays a critical role in improving the performance of modern electronic devices by precisely controlling the charge carrier density. However, the absence of a stable doping method for p‐type oxide semiconductors has severely restricted the development of metal oxide‐based transparent p–n junctions and complementary circuits. Here, an efficient and stable doping process for p‐type oxide semiconductors by using molecule charge transfer doping with tetrafluoro‐tetracyanoquinodimethane (F₄TCNQ) is reported. The selections of a suitable dopant and geometry play a crucial role in the charge‐transfer doping effect. The insertion of a F₄TCNQ thin dopant film (2–7 nm) between a Au source‐drain electrode and solution‐processed p‐type copper oxide (Cu_xO) film in bottom‐gate top‐contact thin‐film transistors (TFTs) provides a mobility enhancement of over 20‐fold with the desired threshold voltage adjustment. By combining doped p‐type Cu_xO and n‐type indium gallium zinc oxide TFTs, a solution‐processed transparent complementary metal‐oxide semiconductor inverter is demonstrated with a high gain voltage of 50. This novel p‐doping method is expected to accelerate the development of high‐performance and reliable p‐channel oxide transistors and has the potential for widespread applications.     

Solution‐Processed Metallic Nanowire Electrodes as Indium Tin Oxide Replacement for Thin‐Film Solar Cells

Solution processed silver nanowire (Ag NW) films are introduced as transparent electrodes for thin‐film solar cells. Ag NW electrodes were processed by doctor blade‐coating on glass substrates at moderate temperatures (less than 100 °C). The morphological, optical, and electrical characteristics of these electrodes were investigated as a function of processing parameters. For solar‐cell application, Ag NW electrodes with an average transparency of 90% between 450 and 800 nm and a sheet resistivity of ≈10 Ω per square were chosen. The performance of poly(3‐hexylthiophen‐2,5‐diyl):[6,6]‐phenyl‐C61‐butyric acid methyl ester (P3HT:PCBM) solar cells on Ag NW electrodes was found to match the performance of otherwise identical cells on indium tin oxide. Overall, P3HT:PCBM solar cells with an efficiency of 2.5% on transparent Ag NW electrodes have been realized.     

Gate Capacitance‐Dependent Field‐Effect Mobility in Solution‐Processed Oxide Semiconductor Thin‐Film Transistors

Solution‐processed oxide semiconductors (OSs) used as channel layer have been presented as a solution to the demand for flexible, cheap, and transparent thin‐film transistors (TFTs). In order to produce high‐performance and long‐sustainable portable devices with the solution‐processed OS TFTs, the low‐operational voltage driving current is a key issue. Experimentally, increasing the gate‐insulator capacitances by high‐k dielectrics in the OS TFTs has significantly improved the field‐effect mobility of the OS TFTs. But, methodical examinations of how the field‐effect mobility depends on gate capacitance have not been presented yet. Here, a systematic analysis of the field‐effect mobility on the gate capacitances in the solution‐processed OS TFTs is presented, where the multiple‐trapping‐and‐release and hopping percolation mechanism are used to describe the electrical conductivity of the nanocrystalline and amorphous OSs, respectively. An intuitive single‐piece expression showing how the field‐effect mobility depends on gate capacitance is developed based on the aforementioned mechanisms. The field‐effect mobility, depending on the gate capacitances, of the fabricated ZnO and ZnSnO TFTs clearly follows the theoretical prediction. In addition, the way in which the gate insulator properties (e.g., gate capacitance or dielectric constant) affect the field‐effect mobility maximum in the nanocrystalline ZnO and amorphous ZnSnO TFTs are investigated.     

High‐Performance Flexible Broadband Photodetector Based on Organolead Halide Perovskite

Organolead halide perovskites have attracted extensive attentions as light harvesting materials for solar cells recently, because of its high charge‐carrier mobilities, high photoconversion efficiencies, low energy cost, ease of deposition, and so on. Herein, with CH₃NH₃PbI₃ film deposited on flexible ITO coated substrate, the first organolead halide perovskite based broadband photodetector is demonstrated. The organolead halide perovskite photodetector is sensitive to a broadband wavelength from the ultraviolet light to entire visible light, showing a photo‐responsivity of 3.49 A W^?1, 0.0367 A W^?1, an external quantum efficiency of 1.19×10³%, 5.84% at 365 nm and 780 nm with a voltage bias of 3 V, respectively. Additionally, the as‐fabricated photodetector exhibit excellent flexibility and robustness with no obvious variation of photocurrent after bending for several times. The organolead halide perovskite photodetector with high sensitivity, high speed and broad spectrum photoresponse is promising for further practical applications. And this platform creates new opportunities for the development of low‐cost, solution‐processed and high‐efficiency photodetectors.     

Near‐Infrared and Short‐Wavelength Infrared Photodiodes Based on Dye–Perovskite Composites

Organohalide perovskites have emerged as promising light‐sensing materials because of their superior optoelectronic properties and low‐cost processing methods. Recently, perovskite‐based photodetectors have successfully been demonstrated as both broadband and narrowband varieties. However, the photodetection bandwidth in perovskite‐based photodetectors has so far been limited to the near‐infrared regime owing to the relatively wide band gap of hybrid organohalide perovskites. In particular, short‐wavelength infrared photodiodes operating beyond 1 µm have not yet been realized with organohalide perovskites. In this study, narrow band gap organic dyes are combined with hybrid perovskites to form composite films as active photoresponsive layers. Tuning the dye loading allows for optimization of the spectral response characteristics and excellent charge‐carrier mobilities near 11 cm² V^?1 s^?1, suggesting that these composites combine the light‐absorbing properties or IR dyes with the outstanding charge‐extraction characteristics of the perovskite. This study demonstrates the first perovskite photodiodes with deep near‐infrared and short‐wavelength infrared response that extends as far as 1.6 µm. All devices are solution‐processed and exhibit relatively high responsivity, low dark current, and fast response at room temperature, making this approach highly attractive for next‐generation light‐detection techniques.     

A Transparent,Flexible, Low‐Temperature,and Solution‐Processible Graphene Composite Electrode

The synthesis and preparation of a new type of graphene composite material suitable for spin‐coating into conductive, transparent, and flexible thin film electrodes in ambient conditions is reported here for the first time. Solution‐processible graphene with diameter up to 50 μm is synthesized by surfactant‐assisted exfoliation of graphite oxide and in situ chemical reduction in a large quantity. Spin‐coating the mixing solution of surfactant‐functionalized graphene and PEDOT:PSS yields the graphene composite electrode (GCE) without the need for high temperature annealing, chemical vapor deposition, or any additional transfer‐printing process. The conductivity and transparency of GCE are at the same level as those of an indium tin oxide (ITO) electrode. Importantly, it exhibits high stability (both mechanical and electrical) in bending tests of at least 1000 cycles. The performance of organic light‐emitting diodes based on a GCE anode is comparable, if not superior, to that of OLEDs made with an ITO anode.     

A Solution‐Processed UV‐Sensitive Photodiode Produced Using a New Silicon Nanocrystal Ink

This article presents a simple and effective method of functionalizing hydrogen‐terminated silicon (Si) nanocrystals (NCs) to form a high‐quality colloidal Si NC ink with short ligands that allow charge transport in nanocrystal solid films. Si NCs fabricated by laser‐pyrolysis and acid etching are passivated with allyl disulfide via ultraviolet (UV)‐initiated hydrosilylation to form a stable colloidal Si NC ink. Then a Si NC‐based photodiode is directly fabricated in air from this ink. Only a solution‐processed poly(3,4‐ethylenedioxy‐thiophene):poly(styrene sulfonate) (PEDOT: PSS) electron blocking layer and top‐ and bottom‐contacts are needed along with the Si NC layer to construct the device. A Schottky‐junction at the interface between the Si NC absorber layer and aluminum (Al) back electrode drives charge separation in the device under illumination. The unpackaged Si NC‐based photodiode exhibites a peak photoresponse of 0.02 A W^?1 to UV light in air, within an order of magnitude of the response of commercially available gallium phosphide (GaP), gallium nitride (GaN), and silicon carbide (SiC) based photodetectors. This provides a new pathway to large‐area, low‐cost solution‐processed UV photodetectors on flexible substrates and demonstrates the potential of this new silicon nanocrystal ink for broader applications in solution‐processed optoelectronics.     

Morphological Control for High Performance,Solution‐Processed Planar Heterojunction Perovskite Solar Cells

Organometal trihalide perovskite based solar cells have exhibited the highest efficiencies to‐date when incorporated into mesostructured composites. However, thin solid films of a perovskite absorber should be capable of operating at the highest efficiency in a simple planar heterojunction configuration. Here, it is shown that film morphology is a critical issue in planar heterojunction CH₃NH₃PbI_3‐xCl_x solar cells. The morphology is carefully controlled by varying processing conditions, and it is demonstrated that the highest photocurrents are attainable only with the highest perovskite surface coverages. With optimized solution based film formation, power conversion efficiencies of up to 11.4% are achieved, the first report of efficiencies above 10% in fully thin‐film solution processed perovskite solar cells with no mesoporous layer.     

Patterning of Flexible Transparent Thin‐Film Transistors with Solution‐Processed ZnO Using the Binary Solvent Mixture

Flexible transparent thin‐film transistors (TTFTs) have emerged as next‐generation transistors because of their applicability in transparent electronic devices. In particular, the major driving force behind solution‐processed zinc oxide film research is its prospective use in printing for electronics. Since the patterning that prevents current leakage and crosstalk noise is essential to fabricate TTFTs, the need for sophisticated patterning methods is critical. In patterning solution‐processed ZnO thin films, several points require careful consideration. In general, as these thin films have a porous structure, conventional patterning based on photolithography causes loss of film performance. In addition, as controlling the drying process is very subtle and cumbersome, it is difficult to fabricate ZnO semiconductor films with robust fidelity through selective printing or patterning. Therefore, we have developed a simple selective patterning method using a substrate pre‐patterned through bond breakage of poly(methyl methacrylate) (PMMA), as well as a new developing method using a toluene–methanol mixture as a binary solvent mixture.     

High‐Performance Near‐IR Photodetector Using Low‐Bandgap MA0.5FA0.5Pb0.5Sn0.5I3 Perovskite

Photodetectors with ultrafast response are explored using inorganic/organic hybrid perovskites. High responsivity and fast optoelectronic response are achieved due to the exceptional semiconducting properties of perovskite materials. However, most of the perovskite‐based photodetectors exploited to date are centered on Pb‐based perovskites, which only afford spectral response across the visible spectrum. This study demonstrates a high‐performance near‐IR (NIR) photodetector using a stable low‐bandgap Sn‐containing perovskite, (CH₃NH₃)_0.5(NH₂CHNH₂)_0.5Pb_0.5Sn_0.5I₃ (MA_0.5FA_0.5Pb_0.5Sn_0.5I₃), which is processed with an antioxidant additive, ascorbic acid (AA). The addition of AA effectively strengthens the stability of Sn‐containing perovskite against oxygen, thereby significantly inhibiting the leakage current. Consequently, the derived photodetector shows high responsivity with a detectivity of over 10¹² Jones ranging from 800 to 970 nm. Such low‐cost, solution processable NIR photodetectors with high performance show promising potential for future optoelectronic applications.     

All Solution‐Processed Chalcogenide Solar Cells – from Single Functional Layers Towards a 13.8% Efficient CIGS Device

Solution processing of inorganic thin films has become an important thrust in material research community because it offers low‐cost and high‐throughput deposition of various functional coatings and devices. Especially inorganic thin film solar cells – macroelectronic devices that rely on consecutive deposition of layers on large‐area rigid and flexible substrates – could benefit from solution approaches in order to realize their low‐cost nature. This article critically reviews existing deposition approaches of functional layers for chalcogenide solar cells with an extension to other thin film technologies. Only true solutions of readily available metal salts in appropriate solvents are considered without the need of pre‐fabricated nanoparticles. By combining three promising approaches, an air‐stable Cu(In,Ga)Se₂ thin film solar cell with efficiency of 13.8% is demonstrated where all constituent layers (except the metal back contact) are processed from solutions. Notably, water is employed as the solvent in all steps, highlighting the potential for safe manufacturing with high utilization rates.